WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic
MPN: WM8940CGEFL/V ✗ जीवन की समाप्तिWM8940CGEFL/V अवलोकन
An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog microphone or line inputs back into digital data. Its hierarchy extends from codec and audio interface to analog and mixed-signal IC, then to interface IC and semiconductor. The WM8940 combines these conversion functions with integrated output drivers, reducing the number of external microphone, headphone, and speaker amplifier components required in portable audio equipment.
The WM8940 supports differential or single-ended microphone input and includes speaker, headphone, and mono line-output drivers. Its advanced delta-sigma converters, digital decimation filters, and digital interpolation filters support audio processing from 8 kS/s through 48 kS/s. The manufacturer also identifies a selectable high-pass filter and four programmable notch filters, allowing the device to address microphone low-frequency rejection, wind noise, and other in-band acoustic problems.
The 24-bit digital audio interface connects the codec to a host processor, while separate analog and digital supply domains support mixed-signal systems operating at different voltage levels. The analog supply range of 2.5 V to 3.6 V and digital supply range of 1.71 V to 3.6 V provide flexibility for portable consumer equipment. Integrated drivers reduce external amplification requirements, but output loading, thermal dissipation, and DC bias remain important layout considerations.
Typical applications include digital still cameras, camcorders, portable media players, voice recorders, personal audio devices, and other battery-powered products requiring one-channel capture and playback. Its low-power mono architecture is particularly appropriate where a stereo codec would add cost, board area, and energy use without improving the intended recording or playback experience. The integrated headphone and speaker paths simplify portable-system design while retaining flexible input selection and digital audio processing.
PCB design should keep analog microphone and output routes away from digital clock and serial-data traces, provide a continuous ground reference beneath the exposed pad, and decouple the analog and digital supply pins locally. Component values, filter settings, clock requirements, and output configuration must be selected using the manufacturer’s recommended application circuit and pin descriptions. The exposed thermal pad should be connected to the ground plane according to the package land pattern.
This page combines the manufacturer’s device capabilities, lifecycle status, package information, and verified cross-reference results with practical application guidance. It also distinguishes the exact WM8940CGEFL/V order code from related packaging variants and separates confirmed drop-in replacements from functional alternatives that still require package and pin-level review.
के लिए ड्रॉप-इन विकल्प WM8940CGEFL/V — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंWM8940CGEFL/V Maximum Ratings और Electrical Characteristics
| Device Type | Mono audio codec |
| Digital Audio Interface | 24-bit serial |
| Analog Supply Voltage | 2.5 V to 3.6 V |
| Digital Supply Voltage | 1.71 V to 3.6 V |
| Audio Sample Rate | 8 kS/s to 48 kS/s |
| Microphone Input | Differential or single-ended |
| Integrated Output Drivers | Speaker, headphone, and mono line output |
| Converter Architecture | Advanced delta-sigma converters |
| Decimation Filter | Digital |
| Interpolation Filter | Digital |
| High-Pass Filter | Selectable |
| Programmable Notch Filters | 4 |
| पैकेज | 24-QFN (4 x 4 mm), exposed pad |
| माउंटिंग प्रकार | Surface mount |
| ऑपरेटिंग तापमान | -25 °C to +85 °C |
| External Microphone Amplifier | Not required |
| External Headphone Amplifier | Not required |
| ECCN | EAR99 |
| Halogen-Free Status | Compliant |
| Product Lifecycle | Discontinued |
WM8940CGEFL/V 24-qfn (4 x 4 mm), exposed pad पिन कॉन्फ़िगरेशन गाइड
WM8940CGEFL/V (24-qfn (4 x 4 mm), exposed pad पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: WM8940CGEFL/V.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
WM8940CGEFL/V के लिए उपयुक्त है 6 अनुप्रयोगs: Digital Still Camera Voice Recording, Camcorder Audio Front End, Portable Voice Recorder, Personal Audio Player, Industrial Voice Terminal, USB Audio Accessory.
Digital Still Camera Voice Recording
The WM8940CGEFL/V fits digital still cameras that capture mono commentary or ambient sound alongside video. Its differential or single-ended microphone input supports direct connection to an electret or MEMS microphone network, while the 24-bit serial interface transfers audio to the image processor. The selectable high-pass filter and four programmable notch filters provide paths for reducing handling noise and selected resonances without implementing every filter externally. At 8 kS/s to 48 kS/s operation, the codec can match the camera’s recording format and avoid unnecessary sampling overhead. Integrated headphone and speaker drivers can support local playback or monitoring, reducing external amplification blocks in a space-constrained portable design.
अनुशंसित
Camcorder Audio Front End
The WM8940CGEFL/V is suitable for a camcorder’s mono audio channel because it combines a microphone input, programmable digital filtering, headphone playback, and speaker drive in a 24-QFN package. Its analog supply operates from 2.5 V to 3.6 V, allowing the codec to share a conventional portable analog rail while accepting a separate 1.71 V to 3.6 V digital rail. The 24-bit interface provides sufficient resolution for high-quality voice recording, and the 8 kS/s to 48 kS/s range accommodates multiple recording standards. Keeping the analog path short and isolated from processor buses is especially important when motor noise and display converters are present in the enclosure.
अनुशंसित
Portable Voice Recorder
A compact voice recorder can use the WM8940CGEFL/V to consolidate microphone capture and headphone monitoring while reducing the number of external analog components. The integrated microphone path supports differential and single-ended sources, and the selectable high-pass filter helps suppress rumble or speech energy below the intended recording band. Four programmable notch filters can target mechanical resonances in a handheld enclosure. The codec’s 24-bit digital interface and broad 8 kS/s to 48 kS/s range let a low-power controller select speech-optimized or higher-fidelity modes. Engineer the headphone and speaker outputs for the intended impedance, and verify thermal performance at maximum playback volume.
अनुशंसित
Personal Audio Player
The WM8940CGEFL/V can serve as the audio interface in a personal playback device that uses one channel rather than a stereo output architecture. The integrated headphone and mono line-output paths remove the need for separate headphone amplifiers, while the speaker driver supports direct connection to a suitably designed speaker network. The 24-bit serial interface supports clean transfer from a host processor, and the digital interpolation filters form part of the playback conversion chain. Because this is a mono codec, a stereo source must be intentionally downmixed in firmware or the host domain. Validate headphone impedance, output swing, channel balance, and thermal rise before release.
अनुशंसित
Industrial Voice Terminal
A battery-powered industrial voice terminal can use the WM8940CGEFL/V for localized speech playback and microphone capture without requiring a stereo codec. The analog supply range of 2.5 V to 3.6 V and digital range of 1.71 V to 3.6 V support mixed voltage domains found in portable embedded systems. Digital filtering allows the firmware to adapt speech bandwidth and notch settings for the enclosure and microphone installation. Integrated headphone drive is useful for operator monitoring or test fixtures, while mono line output can feed a larger external amplifier when required. Because the WM8940 is listed as discontinued, long-lived industrial programs should obtain lifecycle assurance and inspect any remaining stock carefully.
अनुशंसित
USB Audio Accessory
The WM8940CGEFL/V can form the analog side of a compact USB or embedded audio accessory when the host controller provides a compatible digital audio stream. The 24-bit interface supports high-resolution mono capture and playback, and the microphone input accommodates either a balanced studio-style connection or a simpler single-ended source. A 48 kS/s operating mode is available when multimedia recording quality is required, while lower modes can reduce activity in battery-powered designs. Headphone and speaker outputs support monitoring and direct playback. The codec does not implement USB itself, so the host must handle USB negotiation, clocking, and firmware configuration while the analog layout minimizes digital crosstalk.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा WM8940CGEFL/V — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
मुख्य विशेषताएँ
- Complete mono signal path in one compact package (बनामAD73311LARUZ)
- Programmable audio filtering integrated into the codec (बनामAK4536VNP)
- Broad portable-audio sample-rate range (बनामMSM7732A-01 MB)
- Separate analog and digital supply ranges (बनामSTw5095T)
डिज़ाइन नोट्स
Separate the microphone and analog output paths from the digital audio bus, serial clock, and switching-supply nodes. Route analog signals over a continuous ground reference, keep the microphone network close to the relevant pins, and avoid placing digital return-current paths beneath sensitive audio traces. The exposed pad should connect to the ground plane using the manufacturer’s land pattern without introducing slots into the return path.
Treat the 2.5 V to 3.6 V analog supply and 1.71 V to 3.6 V digital supply as separate routing and decoupling domains. Place the manufacturer-recommended bypass capacitors directly beside their associated supply pins, maintain short return paths, and avoid sharing narrow supply traces between high-current speaker drive and sensitive analog circuitry. Verify startup sequencing against the host processor because the two supply domains can use different voltage levels.
Speaker and headphone drive dissipate power internally, so thermal performance depends on the output waveform, load impedance, supply voltage, and exposed-pad construction. Use the maximum-output condition from the manufacturer’s application guidance to estimate junction rise, provide uninterrupted copper beneath the package, and avoid enclosing the assembly without a thermal path. Recheck distortion and output swing at the highest ambient temperature expected by the product.
Do not treat a functional codec cross-reference as a drop-in replacement. Clock source, digital interface format, register map, analog pin assignment, filter implementation, and exposed-pad layout can differ even when the device is described as a mono codec. The exact WM8940CGEFL/V order code must also be checked for packing requirements before release to manufacturing.
अनुपालन जानकारी
The cross-reference listing identifies the WM8940 as EAR99 and halogen-free compliant. No explicit RoHS, REACH, lead-free, conflict-minerals, or automotive qualification statement was identified for the exact order code.