G

WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic

MPN: WM8940CGEFL/V ✗ 停產
2.5 V to 3.6 V Vdss 24-QFN (4 x 4 mm), exposed pad Package
MOQ: 1 |

WM8940CGEFL/V 概覽

The Cirrus Logic WM8940CGEFL/V is a low-power mono audio codec with integrated microphone, headphone, speaker, and mono line-output support, operating from a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply. The device accepts 24-bit serial audio data, supports sample rates from 8 kS/s to 48 kS/s, and is packaged in a 24-QFN surface-mount package.

An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog microphone or line inputs back into digital data. Its hierarchy extends from codec and audio interface to analog and mixed-signal IC, then to interface IC and semiconductor. The WM8940 combines these conversion functions with integrated output drivers, reducing the number of external microphone, headphone, and speaker amplifier components required in portable audio equipment.

The WM8940 supports differential or single-ended microphone input and includes speaker, headphone, and mono line-output drivers. Its advanced delta-sigma converters, digital decimation filters, and digital interpolation filters support audio processing from 8 kS/s through 48 kS/s. The manufacturer also identifies a selectable high-pass filter and four programmable notch filters, allowing the device to address microphone low-frequency rejection, wind noise, and other in-band acoustic problems.

The 24-bit digital audio interface connects the codec to a host processor, while separate analog and digital supply domains support mixed-signal systems operating at different voltage levels. The analog supply range of 2.5 V to 3.6 V and digital supply range of 1.71 V to 3.6 V provide flexibility for portable consumer equipment. Integrated drivers reduce external amplification requirements, but output loading, thermal dissipation, and DC bias remain important layout considerations.

Typical applications include digital still cameras, camcorders, portable media players, voice recorders, personal audio devices, and other battery-powered products requiring one-channel capture and playback. Its low-power mono architecture is particularly appropriate where a stereo codec would add cost, board area, and energy use without improving the intended recording or playback experience. The integrated headphone and speaker paths simplify portable-system design while retaining flexible input selection and digital audio processing.

PCB design should keep analog microphone and output routes away from digital clock and serial-data traces, provide a continuous ground reference beneath the exposed pad, and decouple the analog and digital supply pins locally. Component values, filter settings, clock requirements, and output configuration must be selected using the manufacturer’s recommended application circuit and pin descriptions. The exposed thermal pad should be connected to the ground plane according to the package land pattern.

This page combines the manufacturer’s device capabilities, lifecycle status, package information, and verified cross-reference results with practical application guidance. It also distinguishes the exact WM8940CGEFL/V order code from related packaging variants and separates confirmed drop-in replacements from functional alternatives that still require package and pin-level review.

直接替換替代品,適用於 WM8940CGEFL/V — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

WM8940CGEFL/V 最大額定值與電氣特性

Device Type Mono audio codec
Digital Audio Interface 24-bit serial
Analog Supply Voltage 2.5 V to 3.6 V
Digital Supply Voltage 1.71 V to 3.6 V
Audio Sample Rate 8 kS/s to 48 kS/s
Microphone Input Differential or single-ended
Integrated Output Drivers Speaker, headphone, and mono line output
Converter Architecture Advanced delta-sigma converters
Decimation Filter Digital
Interpolation Filter Digital
High-Pass Filter Selectable
Programmable Notch Filters 4
封裝 24-QFN (4 x 4 mm), exposed pad
安裝類型 Surface mount
工作溫度 -25 °C to +85 °C
External Microphone Amplifier Not required
External Headphone Amplifier Not required
ECCN EAR99
Halogen-Free Status Compliant
Product Lifecycle Discontinued

WM8940CGEFL/V 24-qfn (4 x 4 mm), exposed pad 腳位配置指南

WM8940CGEFL/V(24-qfn (4 x 4 mm), exposed pad 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

WM8940CGEFL/V 的 24-qfn (4 x 4 mm), exposed pad 封裝腳位圖

無詳細腳位定義資料: WM8940CGEFL/V.

請參閱 資料表 以查看完整腳位配置。

典型應用

WM8940CGEFL/V 適用於 6 應用s: Digital Still Camera Voice Recording, Camcorder Audio Front End, Portable Voice Recorder, Personal Audio Player, Industrial Voice Terminal, USB Audio Accessory.

📱

Digital Still Camera Voice Recording

The WM8940CGEFL/V fits digital still cameras that capture mono commentary or ambient sound alongside video. Its differential or single-ended microphone input supports direct connection to an electret or MEMS microphone network, while the 24-bit serial interface transfers audio to the image processor. The selectable high-pass filter and four programmable notch filters provide paths for reducing handling noise and selected resonances without implementing every filter externally. At 8 kS/s to 48 kS/s operation, the codec can match the camera’s recording format and avoid unnecessary sampling overhead. Integrated headphone and speaker drivers can support local playback or monitoring, reducing external amplification blocks in a space-constrained portable design.

📱

Camcorder Audio Front End

The WM8940CGEFL/V is suitable for a camcorder’s mono audio channel because it combines a microphone input, programmable digital filtering, headphone playback, and speaker drive in a 24-QFN package. Its analog supply operates from 2.5 V to 3.6 V, allowing the codec to share a conventional portable analog rail while accepting a separate 1.71 V to 3.6 V digital rail. The 24-bit interface provides sufficient resolution for high-quality voice recording, and the 8 kS/s to 48 kS/s range accommodates multiple recording standards. Keeping the analog path short and isolated from processor buses is especially important when motor noise and display converters are present in the enclosure.

🎤

Portable Voice Recorder

A compact voice recorder can use the WM8940CGEFL/V to consolidate microphone capture and headphone monitoring while reducing the number of external analog components. The integrated microphone path supports differential and single-ended sources, and the selectable high-pass filter helps suppress rumble or speech energy below the intended recording band. Four programmable notch filters can target mechanical resonances in a handheld enclosure. The codec’s 24-bit digital interface and broad 8 kS/s to 48 kS/s range let a low-power controller select speech-optimized or higher-fidelity modes. Engineer the headphone and speaker outputs for the intended impedance, and verify thermal performance at maximum playback volume.

🎧

Personal Audio Player

The WM8940CGEFL/V can serve as the audio interface in a personal playback device that uses one channel rather than a stereo output architecture. The integrated headphone and mono line-output paths remove the need for separate headphone amplifiers, while the speaker driver supports direct connection to a suitably designed speaker network. The 24-bit serial interface supports clean transfer from a host processor, and the digital interpolation filters form part of the playback conversion chain. Because this is a mono codec, a stereo source must be intentionally downmixed in firmware or the host domain. Validate headphone impedance, output swing, channel balance, and thermal rise before release.

🏭

Industrial Voice Terminal

A battery-powered industrial voice terminal can use the WM8940CGEFL/V for localized speech playback and microphone capture without requiring a stereo codec. The analog supply range of 2.5 V to 3.6 V and digital range of 1.71 V to 3.6 V support mixed voltage domains found in portable embedded systems. Digital filtering allows the firmware to adapt speech bandwidth and notch settings for the enclosure and microphone installation. Integrated headphone drive is useful for operator monitoring or test fixtures, while mono line output can feed a larger external amplifier when required. Because the WM8940 is listed as discontinued, long-lived industrial programs should obtain lifecycle assurance and inspect any remaining stock carefully.

🖥️

USB Audio Accessory

The WM8940CGEFL/V can form the analog side of a compact USB or embedded audio accessory when the host controller provides a compatible digital audio stream. The 24-bit interface supports high-resolution mono capture and playback, and the microphone input accommodates either a balanced studio-style connection or a simpler single-ended source. A 48 kS/s operating mode is available when multimedia recording quality is required, while lower modes can reduce activity in battery-powered designs. Headphone and speaker outputs support monitoring and direct playback. The codec does not implement USB itself, so the host must handle USB negotiation, clocking, and firmware configuration while the analog layout minimizes digital crosstalk.

推薦產品摘要

WM8940CGEFL/V G 用於: Digital Still Camera Voice Recording, Camcorder Audio Front End, Portable Voice Recorder, Personal Audio Player, Industrial Voice Terminal, USB Audio Accessory WM8940CGEFL/RV Related WM8940 order code 用於: Digital Still Camera Voice Recording, Camcorder Audio Front End, Portable Voice Recorder, Personal Audio Player, Industrial Voice Terminal, USB Audio Accessory
What is the Cirrus Logic WM8940CGEFL/V?
The WM8940CGEFL/V is a low-power, 24-bit mono audio codec designed for portable audio equipment. According to the Cirrus Logic WM8940 datasheet, it supports differential or single-ended microphone inputs, integrated speaker and headphone drivers, mono line output, and serial audio sample rates from 8 kS/s to 48 kS/s. It operates from a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply in a 24-QFN package.
What audio formats does the WM8940CGEFL/V support?
The WM8940CGEFL/V supports a 24-bit serial digital audio interface and sample rates from 8 kS/s to 48 kS/s. The Cirrus Logic WM8940 datasheet identifies advanced delta-sigma converters together with digital decimation and interpolation filters. These functions support high-quality mono recording and playback while reducing the processing burden imposed on a connected host controller.
Where can I download the WM8940CGEFL/V datasheet PDF?
The official WM8940 datasheet PDF is available from Cirrus Logic at the datasheet link on this page. It provides the recommended application circuits, electrical characteristics, digital interface details, filter configuration, register information, and package information. The document is titled WM8940_v4.4.pdf in the manufacturer’s published file name, and no separate document number should be inferred from the file name.
Where can I find the WM8940CGEFL/V pinout?
The WM8940CGEFL/V pin configuration is shown in the Cirrus Logic WM8940 manufacturer datasheet and must be assigned from that pin-description table when laying out the PCB. The device uses a 24-QFN (4 x 4 mm) exposed-pad package. Use the manufacturer’s land pattern and pin numbering directly because exposed-pad, thermal-pad, and supply-pin assignments are package-specific.
What is the best drop-in replacement for the WM8940CGEFL/V?
No confirmed drop-in replacement for the exact WM8940CGEFL/V was identified from the available cross-reference results. The WM8940CGEFL/RV is a closely related Cirrus Logic order code, but its packaging-code meaning must be checked before treating it as interchangeable. Cross-reference candidates such as STw5095T, MSM7732A-01 MB, AD73311LARUZ, and AK4536VNP are functional alternatives, not verified pin-compatible replacements.
Is WM8940CGEFL/V the same as WM8940CGEFL/RV?
The WM8940CGEFL/V and WM8940CGEFL/RV identify closely related WM8940 catalog entries, but they are not automatically interchangeable because their trailing order codes may specify different packing or shipment conditions. Both are associated with the WM8940 mono codec family. Confirm the manufacturer’s ordering-information table, package suffix, tape-and-reel or tray requirement, and PCB footprint before approving either part.
What can replace the WM8940CGEFL/V?
The WM8940CGEFL/V can be evaluated against mono codecs with a 24-bit digital interface and integrated output drivers, but a safe replacement must also match the 24-QFN footprint, pin assignments, supply voltages, clocking, and audio routing. The available cross-reference list includes STw5095T, MSM7732A-01 MB, AD73311LARUZ, AK4536VNP, and STw5095T alternatives. None can be confirmed as a pin-to-pin drop-in replacement without device-level review.
Is the WM8940CGEFL/V suitable for a portable voice recorder?
The WM8940CGEFL/V is suitable for a portable voice recorder because it combines mono microphone capture, digital filtering, headphone and speaker outputs, and low-power operation in one compact 24-QFN package. The Cirrus Logic WM8940 datasheet identifies portable applications including digital still cameras and camcorders. Its selectable high-pass filter and four programmable notch filters can help reject low-frequency handling noise and selected mechanical resonances.
WM8940CGEFL/V vs AK4536VNP — which is better for a mono device?
The WM8940CGEFL/V is the better documented starting point when the design specifically requires the WM8940’s mono signal path, 24-bit interface, integrated speaker and headphone drivers, and 8 kS/s to 48 kS/s operation. AK4536VNP appears in the available functional cross-reference list, but its package, pinout, supply limits, and digital audio interface must be compared before selection. It is not a confirmed drop-in substitute.
When should I choose the WM8940CGEFL/V over a functional alternative?
Choose the WM8940CGEFL/V when an existing portable-product design has already been laid out for its 24-QFN footprint and relies on the WM8940 register map, digital filters, microphone path, or integrated output drivers. A functional alternative may be preferable for a new design if it offers lower power, a newer lifecycle status, smaller size, or a more suitable audio interface. Such a change still requires a new schematic, firmware update, and PCB review.
Does the WM8940CGEFL/V need external microphone and headphone amplifiers?
The WM8940CGEFL/V does not require separate microphone or headphone amplifiers for its intended integrated paths. The Cirrus Logic WM8940 datasheet states that external component requirements are reduced because the device includes microphone input support and headphone-driver circuitry. Output loading, speaker compatibility, thermal performance, and external passive networks still need engineering review for the selected load and acoustic design.
What power supplies does the WM8940CGEFL/V require?
The WM8940CGEFL/V requires a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply. These separate domains support mixed-signal audio systems whose processor and codec logic may operate at different voltage levels. Decouple each supply close to its pins, maintain the return path under the exposed pad, and sequence the rails according to the manufacturer’s application guidance.
What are the key specifications engineers should know about the WM8940CGEFL/V?
The key WM8940CGEFL/V specifications are its mono codec architecture, 24-bit serial digital audio interface, 8 kS/s to 48 kS/s sample-rate range, 2.5 V to 3.6 V analog supply, 1.71 V to 3.6 V digital supply, and 24-QFN exposed-pad package. The Cirrus Logic WM8940 datasheet also identifies differential or single-ended microphone support, integrated speaker and headphone drivers, mono line output, a selectable high-pass filter, and four programmable notch filters.
How much power does the WM8940CGEFL/V consume?
The WM8940CGEFL/V is designed as a low-power mono codec, but a single operating-current figure is not stated in the available product data. Actual consumption depends on the analog and digital supply voltages, active microphone or playback path, output load, sample rate, filter configuration, and digital clock activity. Use the manufacturer’s electrical-characteristics tables and application circuit to select regulators and estimate battery life for the exact operating mode.
Where can I buy the WM8940CGEFL/V and check its lead time?
Use the Request a Quote form on this page to ask for WM8940CGEFL/V availability, current lead time, minimum order quantity, and package quantity. Because the manufacturer lists the WM8940 family as discontinued, request written confirmation of remaining inventory, date codes, traceability, and lifecycle status before committing the component to a new production design.

工程參考資料,適用於 WM8940CGEFL/V — 比較、設計指引及合規資訊。

選型指南

Choose the WM8940CGEFL/V when maintaining an existing WM8940-based design, using a 24-QFN PCB footprint, or requiring the documented combination of mono microphone capture, 24-bit digital audio, programmable filtering, and integrated headphone and speaker outputs. It is particularly suitable for portable cameras, voice recorders, personal-audio products, and compact speech terminals that can use mono audio. Consider a functional alternative such as STw5095T, MSM7732A-01 MB, AD73311LARUZ, or AK4536VNP for a new design if it offers a better lifecycle position, lower power, smaller packaging, or a preferred digital audio architecture. None of those cross-reference candidates is confirmed as pin-to-pin compatible with the WM8940CGEFL/V. Because the WM8940 is listed as discontinued, production continuity should be based on confirmed remaining inventory rather than an assumption that all WM8940 order codes are interchangeable.

主要差異化特點

  • Complete mono signal path in one compact package (對比AD73311LARUZ)
  • Programmable audio filtering integrated into the codec (對比AK4536VNP)
  • Broad portable-audio sample-rate range (對比MSM7732A-01 MB)
  • Separate analog and digital supply ranges (對比STw5095T)

設計說明

Separate the microphone and analog output paths from the digital audio bus, serial clock, and switching-supply nodes. Route analog signals over a continuous ground reference, keep the microphone network close to the relevant pins, and avoid placing digital return-current paths beneath sensitive audio traces. The exposed pad should connect to the ground plane using the manufacturer’s land pattern without introducing slots into the return path.

Treat the 2.5 V to 3.6 V analog supply and 1.71 V to 3.6 V digital supply as separate routing and decoupling domains. Place the manufacturer-recommended bypass capacitors directly beside their associated supply pins, maintain short return paths, and avoid sharing narrow supply traces between high-current speaker drive and sensitive analog circuitry. Verify startup sequencing against the host processor because the two supply domains can use different voltage levels.

Speaker and headphone drive dissipate power internally, so thermal performance depends on the output waveform, load impedance, supply voltage, and exposed-pad construction. Use the maximum-output condition from the manufacturer’s application guidance to estimate junction rise, provide uninterrupted copper beneath the package, and avoid enclosing the assembly without a thermal path. Recheck distortion and output swing at the highest ambient temperature expected by the product.

Do not treat a functional codec cross-reference as a drop-in replacement. Clock source, digital interface format, register map, analog pin assignment, filter implementation, and exposed-pad layout can differ even when the device is described as a mono codec. The exact WM8940CGEFL/V order code must also be checked for packing requirements before release to manufacturing.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Compliant
衝突礦產
Unknown

The cross-reference listing identifies the WM8940 as EAR99 and halogen-free compliant. No explicit RoHS, REACH, lead-free, conflict-minerals, or automotive qualification statement was identified for the exact order code.

資料驗證日期: 2026-11-16 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

WM8940CGEFL/V datasheet WM8940CGEFL/V pinout WM8940CGEFL/V datasheet pdf WM8940CGEFL/V equivalent WM8940CGEFL/V replacement WM8940CGEFL/V cross reference WM8940CGEFL/V 24-QFN footprint WM8940CGEFL/V application circuit Cirrus Logic WM8940CGEFL/V WM8940CGEFL/V price WM8940CGEFL/V stock WM8940 mono speaker driver codec

相關元件與詞彙

Cirrus Logic, Inc. WM8940CGEFL/V WM8940CGEFL/RV WM8940 mono audio codec audio codec mixed-signal IC interface IC 24-bit serial audio delta-sigma converter digital decimation filter digital interpolation filter selectable high-pass filter programmable notch filter differential microphone input single-ended microphone input speaker driver headphone driver mono line output 24-QFN QFN family surface-mount package exposed pad digital still camera camcorder portable voice recorder
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情