Cirrus Logic Inc.

WM9010ECSN/R - Class G Stereo Driver | Cirrus Logic

MPN: WM9010ECSN/R ✓ सक्रिय
1.8 V Vdss 12-W-CSP Package
न्यूनतम ऑर्डर मात्रा: 1 |

WM9010ECSN/R अवलोकन

Cirrus Logic WM9010ECSN/R is a low-power, two-channel Class G stereo headphone-driver IC rated at 12 W in a 12-W-CSP package measuring 1.84 x 1.34 mm. The device supports a 16 ohm headphone load and achieves THD+N of -90 dB at 20 mW into 32 ohm with a 1.8 V supply. Its integrated charge pump generates split-rail voltage supplies for the ground-referenced headphone output stage.

A Class G headphone amplifier is an audio amplifier architecture that combines signal-dependent output characteristics with efficient power delivery. Unlike a continuously biased linear output stage, Class G changes its internal supply behavior according to signal level and load demand. In a portable headset or portable media device, this approach helps reduce power consumed during quiet passages while retaining the output capability needed for louder playback. The WM9010ECSN/R belongs to the broader audio-amplifier IC and power-management semiconductor hierarchy.

The WM9010ECSN/R provides a stereo output configuration, Class G efficiency, and an integrated charge pump in a compact surface-mount package. Its 12-lead CSP is only 1.84 x 1.34 x 0.7 mm, making it suitable for space-constrained portable equipment. A listed output-power figure of 34 mW applies to the characterized operating condition, while the distributor package classification identifies the device as a 12 W-class headphone driver. Headphone impedance and supply voltage remain important when evaluating available output power and distortion.

Audio performance depends on the selected load and operating point. The manufacturer specification of THD+N at -90 dB, 20 mW output, 32 ohm load, and 1.8 V supply demonstrates low distortion at a practical portable-audio level. The integrated charge pump produces the positive and negative rail voltages needed by the ground-referenced headphone driver, reducing the number of external negative-supply components while adding charge-pump switching considerations to PCB layout.

Typical applications include wired and wireless headphones, Bluetooth headset audio paths, portable game accessories, compact USB-C audio devices, and battery-powered music players. The small 12-W-CSP footprint supports dense layouts, while the 16 ohm load specification directly addresses conventional stereo-headphone impedances. In each application, the headphone source should be AC-coupled as required by the circuit design, and the power supply must remain within the device's specified operating limits.

The most important design consideration is PCB implementation around a compact CSP with an integrated charge pump. Place input, output, supply, and decoupling connections according to the manufacturer layout guidance, keep the charge-pump and sensitive audio paths physically separated, and provide a quiet ground return. Confirm output-power capability at the actual supply voltage, channel load, and headphone impedance rather than relying only on the headline package classification.

This product page combines the WM9010ECSN/R electrical characteristics, package data, drop-in-replacement review, application guidance, and design notes into a concise engineering reference. It is intended to accelerate schematic planning, footprint verification, and audio-path design without replacing the complete manufacturer datasheet.

के लिए ड्रॉप-इन विकल्प WM9010ECSN/R — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

WM9010ECSN/R Maximum Ratings और Electrical Characteristics

Amplifier Class Class G
Number of Channels 2 channels
Channel Configuration Stereo
Output Power 34 mW
Total Harmonic Distortion plus Noise -90 dB at 20 mW, 32 ohm, VDD = 1.8 V
Supported Load Impedance 16 ohm
सप्लाई वोल्टेज 1.8 V
Integrated Charge Pump Yes
Output Supply Architecture Split-rail voltage supplies
Output Stage Reference Ground referenced
पैकेज 12-W-CSP
पिन काउंट 12 pins
Package Dimensions 1.84 x 1.34 x 0.7 mm
माउंटिंग प्रकार Surface mount
Device Category Low-power stereo headphone driver
Power Class Class G

WM9010ECSN/R 1.84 x 1.34 x 0.7 mm पिन कॉन्फ़िगरेशन गाइड

WM9010ECSN/R (1.84 x 1.34 x 0.7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

WM9010ECSN/R के लिए 1.84 x 1.34 x 0.7 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: WM9010ECSN/R.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

WM9010ECSN/R के लिए उपयुक्त है 6 अनुप्रयोगs: Bluetooth Headset Audio, Wired Gaming Headset, Portable Music Player, USB-C Audio Accessory, Wireless Headphone Receiver Board, Compact Portable Speaker Headphone Hybrid.

🎧

Bluetooth Headset Audio

The WM9010ECSN/R fits compact Bluetooth headsets that require stereo headphone output from a low-voltage supply. Its two-channel Class G architecture supports conventional 16 ohm and 32 ohm headphone loads, while the integrated charge pump produces the split rails required by the ground-referenced output stage. The 1.84 x 1.34 x 0.7 mm CSP footprint leaves valuable board area for a radio, codec, controls, and battery circuitry. Designers should preserve the manufacturer's charge-pump layout, keep switching paths away from audio inputs, and verify output headroom at the lowest battery voltage.

🎮

Wired Gaming Headset

The WM9010ECSN/R can provide the headphone-output stage in a wired gaming headset where low distortion and compact construction are important. The specified THD+N of -90 dB at 20 mW into 32 ohm at 1.8 V supports clean audio at a practical portable listening level, while Class G operation addresses power efficiency across changing signal amplitudes. Its small CSP requires careful footprint and stencil design, and the analog input network should be positioned away from the charge-pump return path.

📱

Portable Music Player

The WM9010ECSN/R suits battery-powered music players that drive stereo headphones from a compact board. A low-power Class G driver can reduce energy use during quiet passages while preserving output capability for louder playback, and the integrated charge pump removes the need for a discrete negative supply. The 16 ohm load target aligns with common portable headphones, although the designer must calculate maximum output power and thermal stress over the complete battery discharge curve before setting the volume limit.

🔊

USB-C Audio Accessory

The WM9010ECSN/R is suitable for a compact USB-C headphone adapter that converts a digital audio source into analog stereo headphone output. Its small CSP footprint is valuable beside a USB audio interface, while the integrated charge pump supports a ground-referenced headphone stage without a separate negative-rail circuit. Layout quality is especially important because high-speed USB data, regulator switching, and charge-pump energy can couple into the analog path if grounding and return currents are arranged poorly.

🌐

Wireless Headphone Receiver Board

The WM9010ECSN/R can serve as the final stereo drive stage in a wireless headphone receiver. Its Class G topology is appropriate for a battery-operated system that spends substantial time at low listening levels, and its 12-lead CSP preserves routing space for a wireless SoC, digital-to-analog converter, and microphone circuitry. Keep the headphone outputs away from radio and clock-switching areas, maintain a continuous output ground plane, and follow the manufacturer capacitor-placement and exposed-pad recommendations exactly.

🔧

Compact Portable Speaker Headphone Hybrid

The WM9010ECSN/R can support headphone outputs in portable products that also include speaker or docking functions, provided the headphone amplifier is isolated electrically and acoustically from those loads. The device provides dedicated stereo headphone channels and a low-voltage Class G architecture, but it should not be treated as a general-purpose speaker power stage. Use independent output filtering, verify the 16 ohm headphone load, and keep headphone return current away from loudspeaker amplifier power paths to minimize shared-ground interference.

What is the WM9010ECSN/R?
The WM9010ECSN/R is a Cirrus Logic two-channel Class G stereo headphone-driver IC in a compact 12-W-CSP package. It includes a charge pump that generates split-rail supplies for a ground-referenced output stage, supports a 16 ohm headphone load, and is intended for low-power portable audio products. The manufacturer datasheet describes it as a low-power Class G stereo headphone driver.
How many channels and what package does WM9010ECSN/R use?
The WM9010ECSN/R provides two channels in a stereo configuration and uses a 12-W-CSP package measuring 1.84 x 1.34 x 0.7 mm. Its 12-lead surface-mount construction is intended to conserve board area in headphones, Bluetooth accessories, portable game devices, and other compact audio products.
What are the key specifications of WM9010ECSN/R?
The WM9010ECSN/R is a Class G stereo headphone driver with a 16 ohm supported load, an integrated charge pump, and a 1.84 x 1.34 x 0.7 mm CSP package. The specified THD+N is -90 dB at 20 mW into 32 ohm with VDD at 1.8 V. It is designed for low-power, ground-referenced headphone output.
Where can I download the WM9010ECSN/R datasheet PDF?
The WM9010ECSN/R datasheet PDF is available at https://www.components-house.pt/datasheets/e2/wm9010ecsn-r.pdf. It contains the complete electrical characteristics, application information, package drawing, and recommended circuit implementation. Use the pin-description and layout sections when assigning PCB nets and placing decoupling components.
Where can I find the WM9010ECSN/R pinout?
Use the pin-description table and package drawing in the WM9010ECSN/R manufacturer datasheet to identify all 12 CSP connections and their physical positions. The device includes supply, ground, analog input, headphone-output, and charge-pump-related connections. Match the PCB footprint to the drawing rather than assigning pins from a generic CSP template.
Is WM9010ECSN/R suitable for 32 ohm headphones?
Yes, the WM9010ECSN/R is characterized at a 32 ohm load under the specified condition of 20 mW output, 1.8 V supply, and -90 dB THD+N. Its listed load-impedance support also includes 16 ohm headphones. Actual output level, headroom, power dissipation, and thermal performance must be checked at the intended battery-voltage range.
How does the integrated charge pump help the WM9010ECSN/R?
The integrated charge pump generates split-rail voltage supplies for the WM9010ECSN/R's ground-referenced headphone driver. This supports a conventional ground-centered signal path and reduces the need for a separate negative supply. The implementation still requires careful PCB placement so charge-pump switching energy does not disturb sensitive audio signals.
Where to buy WM9010ECSN/R online?
Use the Request a Quote form on this page to request WM9010ECSN/R availability, commercial terms, and current lead time. The form routes the request to XAIPART without requiring shoppers to navigate multiple marketplaces. Confirm the exact WM9010ECSN/R ordering suffix and delivery format with the quotation.
What is the price of WM9010ECSN/R?
The current commercial price for WM9010ECSN/R is returned through the Request a Quote form on this page. Pricing can vary with quantity, order packaging, and supply conditions, so submit the required quantity and target shipment details for a current quotation. No static price should be used for budgeting without that confirmation.
What is the lead time for WM9010ECSN/R?
Request the current WM9010ECSN/R lead time through the Request a Quote form on this page. The inquiry should include your required quantity, shipment destination, and acceptable delivery schedule. This provides a current sourcing answer for the exact orderable MPN rather than a generic amplifier-family lead time.
Is WM9010ECSN/R in stock?
Submit WM9010ECSN/R quantity and delivery requirements through the Request a Quote form to confirm current stock and scheduled allocation. Stock levels are time-sensitive, so a successful order history does not guarantee immediate availability for a new quantity. The quotation response should state the current supply position and lead time.
What is the best drop-in replacement for WM9010ECSN/R?
No verified drop-in replacement was established for the WM9010ECSN/R. A valid replacement must match its 12-W-CSP footprint, pin functions, Class G topology, headphone output architecture, supply range, and load behavior. Do not substitute a merely similar amplifier without checking the manufacturer pinout, power architecture, output stage, and application circuit.
Can WM9010ECSN/R be replaced by another Class G headphone amplifier?
A different Class G headphone amplifier can replace the WM9010ECSN/R only after confirming mechanical, electrical, and pin compatibility. The required checks include the 12-lead CSP footprint, pin assignment, supply voltage, analog input coupling, charge-pump or negative-rail requirements, load impedance, and output-power rating. No candidate in the available cross-reference records meets all of those drop-in conditions.
When should I choose WM9010ECSN/R for a portable audio design?
Choose the WM9010ECSN/R when the design needs a compact, low-power stereo headphone stage with a 16 ohm load target, integrated split-rail generation, and a 1.84 x 1.34 mm CSP footprint. It is particularly suitable for battery-powered headphones and compact accessories. Confirm output headroom across the full supply range before fixing the maximum playback level.
Is WM9010ECSN/R the same as a standard Class D headphone amplifier?
The WM9010ECSN/R is not simply a conventional Class D headphone amplifier. It is explicitly identified as a Class G stereo headphone driver with an integrated charge pump and ground-referenced output stage. The Class G designation changes power-delivery behavior, while the charge pump affects the required external implementation and PCB layout.
Which Cirrus Logic equivalent should engineers evaluate for WM9010ECSN/R?
No cross-brand or Cirrus Logic equivalent was verified as a true drop-in replacement for the WM9010ECSN/R. WM8963ECSN/R is a related audio IC in the available product set, but it cannot be treated as interchangeable without a manufacturer pin, footprint, and electrical comparison. Use the WM9010ECSN/R datasheet as the controlling document for any redesign.

के लिए इंजीनियरिंग संदर्भ डेटा WM9010ECSN/R — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the WM9010ECSN/R for a compact, low-voltage headphone design that specifically benefits from a two-channel Class G output stage, a 16 ohm load target, and integrated split-rail generation. Its defined -90 dB THD+N point at 20 mW into 32 ohm makes it appropriate for portable headsets, music players, wireless headphones, and compact USB-C audio accessories. Before finalizing the choice, verify that the 1.8 V characterization point and the required output headroom cover the full supply range. WM8963ECSN/R, WM8944BECS/R, and WM1811GECS/R may be useful members of a broader audio design, but they are not verified drop-in substitutes for this CSP pinout and power architecture. If no qualified drop-in alternative exists, preserve the WM9010ECSN/R footprint and follow the manufacturer layout and charge-pump guidance.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand Cirrus Logic
Package 12-W-CSP
Amplifier Class Class G
Number of Channels 2 channels
Supported Load Impedance 16 ohm
Total Harmonic Distortion plus Noise -90 dB at 20 mW, 32 ohm, VDD = 1.8 V
Charge Pump Integrated
Output Architecture Ground-referenced stereo headphone driver with split-rail supplies
Package Dimensions 1.84 x 1.34 x 0.7 mm

मुख्य विशेषताएँ

  • Integrated split-rail generation in a compact CSP (बनामWM8963ECSN/R)
  • Defined low-distortion operating point (बनामWM8944BECS/R)
  • Stereo Class G output in a compact board footprint (बनामWM1811GECS/R)

डिज़ाइन नोट्स

Use the manufacturer footprint and pin-description table for the 12-W-CSP before releasing the PCB. A compact CSP requires short component placement, a correctly sized land pattern, and careful stencil and reflow control. Place local decoupling directly at the relevant supply pins and route the headphone outputs as short, matched paths to reduce resistance, capacitance, and channel-to-channel imbalance.

Separate the charge-pump and switched-capacitor paths from the analog input and headphone-output routing. Keep headphone return current continuous and avoid sharing narrow copper paths with radio, display, or digital-clock returns. If the board combines the WM9010ECSN/R with wireless circuitry, place the analog section on the side of the board with the quietest return coupling and provide grounding that follows the manufacturer reference layout.

Do not assume every Class G headphone amplifier is interchangeable with the WM9010ECSN/R. Check pin functions, supply limits, input coupling, output architecture, charge-pump requirements, load behavior, and package dimensions before approving a substitution. Also verify the maximum headphone output level across the lowest supply voltage; a valid electrical match at one operating point does not guarantee the same headroom over the full battery range.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for WM9010ECSN/R. The device is not positioned as an automotive-qualified product, so AEC-Q100 is not applicable.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

WM9010ECSN/R WM9010ECSN/R datasheet WM9010ECSN/R pinout WM9010ECSN/R datasheet pdf WM9010ECSN/R equivalent WM9010ECSN/R replacement WM9010ECSN/R cross reference WM9010ECSN/R Class G amplifier WM9010ECSN/R 12-W-CSP WM9010ECSN/R headphone driver WM9010ECSN/R price Cirrus Logic WM9010ECSN/R

संबंधित कंपोनेंट्स और शब्द

Cirrus Logic Wolfson Microelectronics WM9010ECSN/R WM8963ECSN/R WM8944BECS/R WM1811GECS/R Class G amplifier stereo headphone driver audio amplifier IC integrated charge pump split-rail supply ground-referenced output stage THD+N 16 ohm load 32 ohm load 12-W-CSP CSP package surface mount portable audio Bluetooth headset USB-C audio accessory low-power audio charge-pump switching headphone output filter
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें