WM9010ECSN/R - Class G Stereo Driver | Cirrus Logic
MPN: WM9010ECSN/R ✓ 啟用中WM9010ECSN/R 概覽
A Class G headphone amplifier is an audio amplifier architecture that combines signal-dependent output characteristics with efficient power delivery. Unlike a continuously biased linear output stage, Class G changes its internal supply behavior according to signal level and load demand. In a portable headset or portable media device, this approach helps reduce power consumed during quiet passages while retaining the output capability needed for louder playback. The WM9010ECSN/R belongs to the broader audio-amplifier IC and power-management semiconductor hierarchy.
The WM9010ECSN/R provides a stereo output configuration, Class G efficiency, and an integrated charge pump in a compact surface-mount package. Its 12-lead CSP is only 1.84 x 1.34 x 0.7 mm, making it suitable for space-constrained portable equipment. A listed output-power figure of 34 mW applies to the characterized operating condition, while the distributor package classification identifies the device as a 12 W-class headphone driver. Headphone impedance and supply voltage remain important when evaluating available output power and distortion.
Audio performance depends on the selected load and operating point. The manufacturer specification of THD+N at -90 dB, 20 mW output, 32 ohm load, and 1.8 V supply demonstrates low distortion at a practical portable-audio level. The integrated charge pump produces the positive and negative rail voltages needed by the ground-referenced headphone driver, reducing the number of external negative-supply components while adding charge-pump switching considerations to PCB layout.
Typical applications include wired and wireless headphones, Bluetooth headset audio paths, portable game accessories, compact USB-C audio devices, and battery-powered music players. The small 12-W-CSP footprint supports dense layouts, while the 16 ohm load specification directly addresses conventional stereo-headphone impedances. In each application, the headphone source should be AC-coupled as required by the circuit design, and the power supply must remain within the device's specified operating limits.
The most important design consideration is PCB implementation around a compact CSP with an integrated charge pump. Place input, output, supply, and decoupling connections according to the manufacturer layout guidance, keep the charge-pump and sensitive audio paths physically separated, and provide a quiet ground return. Confirm output-power capability at the actual supply voltage, channel load, and headphone impedance rather than relying only on the headline package classification.
This product page combines the WM9010ECSN/R electrical characteristics, package data, drop-in-replacement review, application guidance, and design notes into a concise engineering reference. It is intended to accelerate schematic planning, footprint verification, and audio-path design without replacing the complete manufacturer datasheet.
直接替換替代品,適用於 WM9010ECSN/R — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品WM9010ECSN/R 最大額定值與電氣特性
| Amplifier Class | Class G |
| Number of Channels | 2 channels |
| Channel Configuration | Stereo |
| Output Power | 34 mW |
| Total Harmonic Distortion plus Noise | -90 dB at 20 mW, 32 ohm, VDD = 1.8 V |
| Supported Load Impedance | 16 ohm |
| 供應電壓 | 1.8 V |
| Integrated Charge Pump | Yes |
| Output Supply Architecture | Split-rail voltage supplies |
| Output Stage Reference | Ground referenced |
| 封裝 | 12-W-CSP |
| 腳位數 | 12 pins |
| Package Dimensions | 1.84 x 1.34 x 0.7 mm |
| 安裝類型 | Surface mount |
| Device Category | Low-power stereo headphone driver |
| Power Class | Class G |
WM9010ECSN/R 1.84 x 1.34 x 0.7 mm 腳位配置指南
WM9010ECSN/R(1.84 x 1.34 x 0.7 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: WM9010ECSN/R.
請參閱 資料表 以查看完整腳位配置。
典型應用
WM9010ECSN/R 適用於 6 應用s: Bluetooth Headset Audio, Wired Gaming Headset, Portable Music Player, USB-C Audio Accessory, Wireless Headphone Receiver Board, Compact Portable Speaker Headphone Hybrid.
Bluetooth Headset Audio
The WM9010ECSN/R fits compact Bluetooth headsets that require stereo headphone output from a low-voltage supply. Its two-channel Class G architecture supports conventional 16 ohm and 32 ohm headphone loads, while the integrated charge pump produces the split rails required by the ground-referenced output stage. The 1.84 x 1.34 x 0.7 mm CSP footprint leaves valuable board area for a radio, codec, controls, and battery circuitry. Designers should preserve the manufacturer's charge-pump layout, keep switching paths away from audio inputs, and verify output headroom at the lowest battery voltage.
推薦
Wired Gaming Headset
The WM9010ECSN/R can provide the headphone-output stage in a wired gaming headset where low distortion and compact construction are important. The specified THD+N of -90 dB at 20 mW into 32 ohm at 1.8 V supports clean audio at a practical portable listening level, while Class G operation addresses power efficiency across changing signal amplitudes. Its small CSP requires careful footprint and stencil design, and the analog input network should be positioned away from the charge-pump return path.
推薦
Portable Music Player
The WM9010ECSN/R suits battery-powered music players that drive stereo headphones from a compact board. A low-power Class G driver can reduce energy use during quiet passages while preserving output capability for louder playback, and the integrated charge pump removes the need for a discrete negative supply. The 16 ohm load target aligns with common portable headphones, although the designer must calculate maximum output power and thermal stress over the complete battery discharge curve before setting the volume limit.
推薦
USB-C Audio Accessory
The WM9010ECSN/R is suitable for a compact USB-C headphone adapter that converts a digital audio source into analog stereo headphone output. Its small CSP footprint is valuable beside a USB audio interface, while the integrated charge pump supports a ground-referenced headphone stage without a separate negative-rail circuit. Layout quality is especially important because high-speed USB data, regulator switching, and charge-pump energy can couple into the analog path if grounding and return currents are arranged poorly.
推薦
Wireless Headphone Receiver Board
The WM9010ECSN/R can serve as the final stereo drive stage in a wireless headphone receiver. Its Class G topology is appropriate for a battery-operated system that spends substantial time at low listening levels, and its 12-lead CSP preserves routing space for a wireless SoC, digital-to-analog converter, and microphone circuitry. Keep the headphone outputs away from radio and clock-switching areas, maintain a continuous output ground plane, and follow the manufacturer capacitor-placement and exposed-pad recommendations exactly.
推薦
Compact Portable Speaker Headphone Hybrid
The WM9010ECSN/R can support headphone outputs in portable products that also include speaker or docking functions, provided the headphone amplifier is isolated electrically and acoustically from those loads. The device provides dedicated stereo headphone channels and a low-voltage Class G architecture, but it should not be treated as a general-purpose speaker power stage. Use independent output filtering, verify the 16 ohm headphone load, and keep headphone return current away from loudspeaker amplifier power paths to minimize shared-ground interference.
推薦
推薦產品摘要
工程參考資料,適用於 WM9010ECSN/R — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Cirrus Logic |
| Package | 12-W-CSP |
| Amplifier Class | Class G |
| Number of Channels | 2 channels |
| Supported Load Impedance | 16 ohm |
| Total Harmonic Distortion plus Noise | -90 dB at 20 mW, 32 ohm, VDD = 1.8 V |
| Charge Pump | Integrated |
| Output Architecture | Ground-referenced stereo headphone driver with split-rail supplies |
| Package Dimensions | 1.84 x 1.34 x 0.7 mm |
主要差異化特點
- Integrated split-rail generation in a compact CSP (對比WM8963ECSN/R)
- Defined low-distortion operating point (對比WM8944BECS/R)
- Stereo Class G output in a compact board footprint (對比WM1811GECS/R)
設計說明
Use the manufacturer footprint and pin-description table for the 12-W-CSP before releasing the PCB. A compact CSP requires short component placement, a correctly sized land pattern, and careful stencil and reflow control. Place local decoupling directly at the relevant supply pins and route the headphone outputs as short, matched paths to reduce resistance, capacitance, and channel-to-channel imbalance.
Separate the charge-pump and switched-capacitor paths from the analog input and headphone-output routing. Keep headphone return current continuous and avoid sharing narrow copper paths with radio, display, or digital-clock returns. If the board combines the WM9010ECSN/R with wireless circuitry, place the analog section on the side of the board with the quietest return coupling and provide grounding that follows the manufacturer reference layout.
Do not assume every Class G headphone amplifier is interchangeable with the WM9010ECSN/R. Check pin functions, supply limits, input coupling, output architecture, charge-pump requirements, load behavior, and package dimensions before approving a substitution. Also verify the maximum headphone output level across the lowest supply voltage; a valid electrical match at one operating point does not guarantee the same headroom over the full battery range.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for WM9010ECSN/R. The device is not positioned as an automotive-qualified product, so AEC-Q100 is not applicable.