XC3S200AN-4FT256C - 200K Gate Spartan-3AN FPGA | AMD
MPN: XC3S200AN-4FT256C ✗ जीवन की समाप्तिXC3S200AN-4FT256C अवलोकन
An FPGA is a semiconductor device whose digital logic, interconnect, and I/O resources are configured by a bitstream rather than being permanently defined in silicon. The Spartan-3AN family belongs to the broader FPGA hierarchy, combining configurable logic blocks, block RAM, dedicated multipliers, programmable I/O, and on-chip non-volatile memory. This makes it suitable for parallel processing, control, interface bridging, signal generation, and compact embedded logic implementations.
The XC3S200AN-4FT256C provides 200K system gates and 4,032 logic cells in a compact FTBGA-256 package. Its 195 I/Os provide substantial connectivity for external memory, communications, control signals, and mixed peripherals. The -4 suffix denotes the device performance grade, while the C suffix identifies the commercial temperature class. Its stated operating range is 0°C to 85°C, making it appropriate for equipment expected to operate within commercial environmental conditions.
The Spartan-3AN architecture uses 90 nm fabrication technology and a 1.2 V core supply according to the family comparison data. Its non-volatile configuration capability retains the programmed logic after power removal, avoiding a mandatory external configuration-memory source in designs that exploit that feature. The 256-ball package supports dense PCB integration but requires careful escape routing, thermal analysis, and assembly process control.
Typical uses include industrial control and automation, embedded instrumentation, communications gateways, digital signal-processing front ends, and compact consumer electronics. The 195 available I/Os are particularly useful when several buses, sensors, converters, and status or control signals must be consolidated into one programmable device. Designers can also implement parallel algorithms in configurable logic instead of using several discrete components.
The primary layout concern is BGA fanout and signal integrity. Place power and ground connections directly according to the package pinout, provide continuous return paths beneath high-speed routes, and follow the manufacturer’s decoupling and printed-circuit-board guidance. Validate the assembly process because the 256-pin FTBGA requires fine-pitch manufacturing, inspection, and adequate solder-joint inspection coverage.
This product record combines the family specifications, package details, temperature grade, search demand, and verified cross-reference results with practical substitution and layout guidance. It supports faster engineering review while keeping every unavailable value explicitly identified rather than inferred.
के लिए ड्रॉप-इन विकल्प XC3S200AN-4FT256C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC3S200AN-4FT256C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, FPGA Family, Logic Cells, Operating Temperature, Process Technology.
XC3S200AN-4FT256I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200AN-5FT256C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200AN-3FT256C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200AN-5FT256I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200AN-3FT256I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200A-4FT256C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC3S200AN-4FT256C Maximum Ratings और Electrical Characteristics
| Device Type | FPGA |
| FPGA Family | Spartan-3AN |
| System Gates | 200,000 gates |
| Logic Cells | 4,032 cells |
| User I/O | 195 I/Os |
| Maximum Performance | 667 MHz |
| Performance Grade | -4 |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Package Type | FTBGA-256 |
| Package Pin Count | 256 pins |
| माउंटिंग प्रकार | Surface Mount |
| ऑपरेटिंग तापमान | 0°C to 85°C |
| Temperature Grade | Commercial |
| Configuration Memory | Non-volatile |
| Lead-Free Status | Lead free |
XC3S200AN-4FT256C 256 pins पिन कॉन्फ़िगरेशन गाइड
XC3S200AN-4FT256C (256 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC3S200AN-4FT256C.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC3S200AN-4FT256C के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Embedded Communications Gateway, Digital Signal Processing Front End, Programmable Test and Measurement Front Panel, Consumer Electronics Interface Controller, Security and Surveillance Control Module.
Industrial Automation Controller
The XC3S200AN-4FT256C fits compact industrial automation controllers because 195 I/Os can connect discrete sensors, actuator drivers, communication transceivers, status indicators, and external data converters while 4,032 logic cells implement sequencing and protocol handling. The commercial temperature range of 0°C to 85°C covers controlled equipment enclosures. Designers can use the -4 performance grade for parallel control paths and verify timing against the AMD DS557 device specifications. The principal consideration is preserving a continuous return path and robust power distribution in a 256-ball BGA design.
अनुशंसित
Embedded Communications Gateway
The XC3S200AN-4FT256C is suitable for embedded communications gateways that must bridge serial interfaces, implement packet framing, or monitor communication lines. Its 195 I/Os leave sufficient connectivity for multiple transceivers and control signals, while 4,032 logic cells support parallel routing and interface adaptation. The 667 MHz family performance figure provides timing headroom for moderately parallel designs, subject to actual routing and I/O timing. Power and ground distribution must follow the FTBGA-256 requirements, and bitstream configuration must be validated for the exact device revision.
अनुशंसित
Digital Signal Processing Front End
The XC3S200AN-4FT256C can serve as the programmable front end in a digital signal-processing system, implementing filters, counters, correlation logic, data-format conversion, or parallel sensor conditioning. The 200K-gate Spartan-3AN device provides 4,032 logic cells and 195 I/Os, allowing external converters and memory interfaces to coexist with the processing pipeline. The -4 grade is suitable where the design can close timing at the device’s rated performance rather than requiring the fastest grade. Signal-integrity work should include short converter connections, continuous reference planes, and deliberate separation of sensitive and high-switching-rate routes.
अनुशंसित
Programmable Test and Measurement Front Panel
The XC3S200AN-4FT256C is appropriate for programmable instrumentation front panels where control logic must coordinate switches, indicators, displays, and measurement peripherals. Its 195 I/Os can reduce the number of discrete glue components required for parallel stimulus and status routing, while 4,032 logic cells support timing, sequencing, and data acquisition control. Commercial operation from 0°C to 85°C suits controlled laboratory or industrial test equipment. The design should separate analog measurement paths from digital switching activity and use the exact AMD package data to place supply connections for clean operation.
अनुशंसित
Consumer Electronics Interface Controller
The XC3S200AN-4FT256C can consolidate legacy interface logic in cost-sensitive consumer electronics while retaining 195 I/Os for buttons, displays, audio control, storage interfaces, and peripheral buses. The 200K-gate Spartan-3AN density is large enough for parallel interface logic and control sequencing without requiring several fixed-function devices. Non-volatile configuration allows the design to retain its programmed function after power removal, subject to the device’s configuration and security requirements. The 256-pin FTBGA demands careful escape routing and manufacturing capability, making footprint simplicity a central selection criterion.
अनुशंसित
Security and Surveillance Control Module
The XC3S200AN-4FT256C fits security and surveillance modules that coordinate camera control, sensor inputs, storage interfaces, and alarm outputs. The 195 I/Os support multiple parallel devices, while the programmable logic can implement data routing, timing, and event handling. The commercial 0°C to 85°C range is suitable for protected indoor installations, although outdoor designs should use an industrial-grade option. Because surveillance systems can include long cables and switching peripherals, engineers should control return paths, isolate external interfaces, and separate sensitive acquisition circuitry from high-current output drivers.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC3S200AN-4FT256C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC3S200AN-4FT256I | XC3S200AN-5FT256C | XC3S200AN-3FT256C | XC3S200AN-5FT256I | XC3S200AN-3FT256I | XC3S200A-4FT256C |
|---|---|---|---|---|---|---|---|
| Package | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3A |
| System Gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates |
| Logic Cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells |
| User I/O | 195 I/Os | 195 I/Os | 195 I/Os | 195 I/Os | 195 I/Os | 195 I/Os | 195 I/Os |
| Performance Grade | -4 | -4 | -5 | -3 | -5 | -3 | -4 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial | Commercial | Commercial | Industrial | Industrial | Commercial |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
मुख्य विशेषताएँ
- Commercial -4 grade supports the specified 0°C to 85°C operating range (बनामXC3S200AN-4FT256I)
- Lower performance grade than XC3S200AN-5FT256C (बनामXC3S200AN-5FT256C)
- Higher performance grade than XC3S200AN-3FT256C (बनामXC3S200AN-3FT256C)
- Spartan-3AN non-volatile configuration distinguishes it from the Spartan-3A alternative (बनामXC3S200A-4FT256C)
डिज़ाइन नोट्स
Create the FTBGA-256 land pattern from the exact AMD package drawing for the FT256 package, including ball pitches, solder-mask definition, and pad geometry. Do not reuse an FTG256 land pattern because the FT and FTG package constructions are distinct even though both records reference 256 balls. Preserve the manufacturer’s power and ground ball assignments rather than optimizing them into arbitrary locations, and validate the finished stack-up against the assembly capability of the selected PCB process.
Follow the AMD DS557 decoupling and power-supply recommendations for every supply rail, placing bypass capacitors close to the relevant package balls and minimizing loop area. Use the family’s stated 1.2 V core supply for internal core planning, while separately checking every auxiliary and I/O supply limit in the electrical characteristics. Validate startup, sequencing, current transients, and configuration behavior in the assembled system because BGA power-path inductance can undermine an otherwise adequate nominal voltage.
Route high-speed and clock signals over continuous reference planes and avoid plane splits, vias, and layer transitions where they could interrupt the return path. Match clock and data topology according to the implemented interface standard, and apply source-series termination only when the device and board configuration require it. Treat the 195 available I/Os as a constrained finite resource: assign pins early, check dedicated configuration and clock pins, and complete the exact package pinout review before schematic capture is frozen.
Do not interchange the C and I temperature suffixes without checking the enclosure temperature range and required qualification. Do not treat XC3S200AN-4FTG256C as a board-level replacement for XC3S200AN-4FT256C without verifying the land pattern and ball map. Also avoid substituting XC3S200A-4FT256C when the design depends on Spartan-3AN non-volatile configuration. For every proposed alternative, verify the bitstream, configuration pins, power sequencing, operating limits, and assembly drawing.
अनुपालन जानकारी
The target is identified as lead free. RoHS, REACH, halogen-free, and conflict-minerals status were not established for this exact MPN. AEC-Q100 is marked not applicable because this is a commercial FPGA rather than an automotive-qualified variant.