AMD

XC3S250E-4PQG208C - 250K Gate Spartan-3E FPGA | AMD

MPN: XC3S250E-4PQG208C ✗ जीवन की समाप्ति
1.2 V nominal Vdss 208-pin PQFP, 0.5 mm lead pitch Package 572 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

XC3S250E-4PQG208C अवलोकन

The AMD XC3S250E-4PQG208C is a Spartan-3E field-programmable gate array with 250,000 system gates, 5,508 logic cells, 612 configurable logic blocks, and a maximum clock frequency of 572 MHz, housed in a 208-pin PQFP package. The device uses 90 nm CMOS technology and operates from a 1.2 V core supply.

A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a complementary metal-oxide-semiconductor integrated circuit. Spartan-3E devices combine configurable logic blocks, programmable I/O, block RAM, dedicated multipliers, and clock-management resources in a single package, allowing hardware behavior to be revised without changing the printed circuit board.

The XC3S250E provides 158 inputs, 126 outputs, 612 CLBs, and 5,508 logic cells. Its 250,000 equivalent system gates support control logic, data acquisition, communications, interface bridging, embedded signal processing, and general-purpose prototype platforms. The 1.2 V supply requirement reflects the low-voltage core architecture, while the PQFP package provides 0.5 mm lead pitch and a surface-mount form factor suitable for multilayer boards and conventional assembly processes.

The -4 speed designation identifies the device performance grade, while the PQG208 package code identifies the 208-pin PQFP configuration. The final C suffix denotes the commercial temperature grade. According to the AMD Spartan-3E family data sheet DS312, the device also includes dedicated multipliers and block RAM, making it suitable for designs that require deterministic parallel logic rather than a soft processor alone.

Typical applications include industrial automation controllers, data-acquisition systems, communication equipment, test and measurement instruments, and embedded control systems. Engineers can use its programmable logic for protocol termination, data filtering, clock-domain interfaces, and parallel-to-serial conversion while preserving deterministic timing. The package also permits inspection and rework more readily than many fine-pitch ball-grid-array FPGA packages.

When laying out the board, use the DS312 pinout and package drawing to assign power, ground, configuration, clock, and I/O signals. Keep core and I/O supply planes properly decoupled, provide all required configuration pins with valid levels during startup, and route high-speed clocks and differential-capable pairs according to the family guidance. Confirm that the selected board-generation tool and bitstream support this device before layout release.

This product page combines device specifications, package details, replacement guidance, comparison parameters, and practical PCB considerations. It also distinguishes true same-footprint Spartan-3E options from alternatives requiring a package conversion or redesign, helping engineers preserve existing 208-pin PQFP hardware where possible.

के लिए ड्रॉप-इन विकल्प XC3S250E-4PQG208C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

XC3S250E-4PQ208C

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 208-pin PQFP
Same 250K Spartan-3E architecture and -4 speed grade; package suffix changes from PQG208 to PQ208, with 0% identified change in logic-cell or gate count.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC3S250E-4PQG208I

✅ ड्रॉप-इन
📦 208-pin PQFP
Same 250K architecture, -4 speed grade, and PQG208 footprint; temperature grade changes from commercial C to industrial I, with 0% identified change in gate count.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC3S250E-4PQG208IS1

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 208-pin PQFP
Same 250K Spartan-3E architecture, -4 speed grade, and 208-lead PQFP package; IS1 adds an ordering-code suffix with 0% identified change in logic-cell count.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC3S250E-5PQ208C

✅ ड्रॉप-इन
📦 208-pin PQFP
Same 250K architecture and 208-pin PQFP family; speed grade increases from -4 to -5, a 25% grade-number increase and faster performance class.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC3S250E-5PQG208C

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 208-pin PQFP
Same 250K architecture and PQG208 footprint; speed grade increases from -4 to -5, a 25% grade-number increase with no identified logic-cell change.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC3S250E-4PQG208C Maximum Ratings और Electrical Characteristics

Device Type Spartan-3E Field Programmable Gate Array (FPGA)
System Gates 250,000 gates
Logic Cells 5,508 cells
Configurable Logic Blocks 612 CLBs
अधिकतम क्लॉक फ़्रीक्वेंसी 572 MHz
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V nominal
Supply Voltage Range 1.14 V to 1.26 V
Number of Inputs 158 inputs
आउटपुट की संख्या 126 outputs
पैकेज 208-pin PQFP, 0.5 mm lead pitch
माउंटिंग प्रकार Surface mount
Temperature Grade Commercial
Speed Grade -4
Device Family Spartan-3E
Programmable Logic Resources 5,508 logic cells
I/O Count 284 total inputs and outputs

XC3S250E-4PQG208C 208-pin pqfp, 0.5 mm lead pitch पिन कॉन्फ़िगरेशन गाइड

XC3S250E-4PQG208C (208-pin pqfp, 0.5 mm lead pitch पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XC3S250E-4PQG208C के लिए 208-pin pqfp, 0.5 mm lead pitch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC3S250E-4PQG208C.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XC3S250E-4PQG208C के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Data-Acquisition System, Communication Interface, Test and Measurement Instrument, Embedded Signal Processing, Legacy Control Platform.

🏭

Industrial Automation Controller

The XC3S250E-4PQG208C is well suited to industrial automation logic because its 612 CLBs and 5,508 logic cells can implement parallel sequencing, machine-state control, interlocks, and communication logic without a separate processor. A typical design would allocate CLBs for motion sequencing and digital I/O, while block RAM supports buffers and programmable logic blocks handle arithmetic. The 208-pin PQFP offers 158 inputs and 126 outputs, providing substantial board-level connectivity. Because the -4 version is commercial grade, confirm the enclosure temperature and select the industrial suffix when wider environmental coverage is required.

📊

Data-Acquisition System

The XC3S250E-4PQG208C can serve as the digital backbone of a parallel data-acquisition system. Its 158 inputs and 126 outputs support multiple converter channels, capture-control signals, memory addressing, and host interfaces, while the 572 MHz maximum clock allows timing logic to operate well above typical data-conversion rates. Designers can use programmable logic for channel interleaving, filtering, trigger capture, and data packing. The 1.2 V core and 90 nm CMOS implementation require careful decoupling and clock routing, but the PQFP package simplifies board inspection compared with fine-pitch BGA devices.

🌐

Communication Interface

The XC3S250E-4PQG208C is suitable for legacy communication interfaces that benefit from dedicated parallel hardware rather than a high-power processor. Its 5,508 logic cells can implement protocol framing, CRC generation, packet buffering, clock-domain crossing, and parallel-to-serial conversion. The 612 CLBs allow multiple channels to operate concurrently, while block RAM and dedicated multipliers can assist with payload handling and filtering. Designers should verify that the selected I/O standard, clock topology, and -4 timing margin meet the interface specification before releasing the PCB.

🔧

Test and Measurement Instrument

The XC3S250E-4PQG208C can implement deterministic sequencing, pattern generation, and acquisition control in test and measurement equipment. Its parallel architecture is useful for digital pattern engines, timing generators, instrument-bus interfaces, and control of external converters. The 250,000-system-gate device provides enough logic for concurrent measurement channels without relying on software timing, and the 208-pin PQFP package supports controlled routing of numerous high-speed and static signals. Critical clock and I/O paths should be reviewed against the DS312 timing tables for the exact -4 speed grade.

📡

Embedded Signal Processing

The XC3S250E-4PQG208C supports parallel embedded signal-processing pipelines where deterministic latency and dedicated arithmetic resources are valuable. With 612 CLBs, 5,508 logic cells, block RAM, and dedicated multipliers, the FPGA can implement FIR filters, correlators, digital modulation, or fixed-point arithmetic stages alongside a control processor. A 1.2 V core and 90 nm CMOS implementation make careful clock-tree and power planning important, especially when multipliers and RAM operate concurrently. Designers should compare the tool-generated timing report with the system clock requirement before hardware release.

🖥️

Legacy Control Platform

The XC3S250E-4PQG208C is especially relevant when maintaining a control platform whose PCB already uses the Spartan-3E 208-pin PQFP footprint. It can reproduce deterministic control, interlock, sequencing, and peripheral-interface functions while avoiding a board redesign when the XC3S250E-4PQG208C or a verified suffix variant is available. Engineers should preserve the original configuration scheme, pin assignments, I/O standards, and timing assumptions. Because AMD discontinued the PQ(G)208 package line, long-term support planning should include qualification of inventory and a migration path to a currently supported package.

What are the key specifications of XC3S250E-4PQG208C that engineers should know?
The XC3S250E-4PQG208C is a 250,000-system-gate Spartan-3E FPGA with 5,508 logic cells, 612 CLBs, and a 572 MHz maximum clock frequency. According to the AMD DS312 data sheet, it uses 90 nm CMOS technology, operates from a nominal 1.2 V core supply, provides 158 inputs and 126 outputs, and is packaged in a 208-pin PQFP. The -4 suffix denotes the performance grade, while C identifies the commercial temperature grade.
Where can I download the XC3S250E-4PQG208C datasheet PDF?
The authoritative XC3S250E-4PQG208C documentation is the AMD Spartan-3E FPGA Family Data Sheet DS312, available from the AMD documentation page at https://docs.amd.com/v/u/en-US/ds312. Use DS312 to confirm package pin assignments, recommended power connections, configuration requirements, DC characteristics, and AC timing. The device-specific ordering code should also be checked against the package and temperature-grade marking information before a new PCB is released.
Where can I find the XC3S250E-4PQG208C pinout?
The XC3S250E-4PQG208C pinout is defined in the AMD Spartan-3E DS312 family data sheet under the 208-pin PQFP package information. Engineers should use the package pin table and footprint drawing together because configuration, power, ground, clock, and user I/O positions must all be honored. The PQG208 footprint uses a 0.5 mm lead pitch. Request a package drawing and PCB-library footprint from AMD or the board manufacturer when the mechanical outline is required for assembly.
What can replace the XC3S250E-4PQG208C without changing the PCB?
The closest same-footprint choices are the XC3S250E-4PQ208C and XC3S250E-4PQG208I, both of which retain the Spartan-3E 208-pin PQFP format. The PQ208C variant changes the package suffix while preserving the -4 speed grade; the PQG208I variant changes the temperature grade. Verify pinout, configuration behavior, and timing requirements before substitution. AMD’s package-discontinuation notice states that no compatible replacements exist for affected PQ(G)208 products, so production availability must be confirmed separately.
Is XC3S250E-4PQG208C the same as XC3S250E-4PQG208I?
No. The XC3S250E-4PQG208C is the commercial-temperature version, while the XC3S250E-4PQG208I is the industrial-temperature version. Both use the Spartan-3E 250K architecture, the -4 speed grade, and the 208-pin PQG package. An industrial version can generally be used where the commercial-temperature part is acceptable, but procurement should confirm the exact qualification, marking, and operating-temperature requirements for the finished equipment.
XC3S250E-4PQG208C vs XC3S250E-5PQ208C: which is better for timing-critical designs?
The XC3S250E-5PQ208C is the faster speed-grade option, while the XC3S250E-4PQG208C targets the -4 grade. Both use the 208-pin PQFP family and the same 250,000-gate Spartan-3E architecture. Select -5 when the design requires the higher performance grade and its timing characteristics are supported by the selected design tools; select -4 when the lower grade meets timing and power requirements. Verify the complete device and pinout tables in DS312 before interchange.
When should I choose XC3S250E-4PQG208C over another Spartan-3E FPGA?
Choose the XC3S250E-4PQG208C when a design needs 250,000 system gates, 5,508 logic cells, the -4 speed grade, and the exact 208-pin PQFP footprint already present on the PCB. It is especially relevant for legacy industrial, instrumentation, control, or communications equipment that cannot be respun for a different package. For new BGA-based designs, a newer FPGA family may offer better tool support, integration, and lifecycle assurance, but it requires a complete board redesign.
Is XC3S250E-4PQG208C suitable for industrial control and data-acquisition systems?
The XC3S250E-4PQG208C is suitable for deterministic control and data-acquisition logic when the system falls within its commercial operating-temperature requirements. Its 612 CLBs, 5,508 logic cells, 158 inputs, 126 outputs, and 572 MHz maximum clock provide substantial parallel-processing capacity. For equipment exposed to extended temperature ranges or severe industrial environments, specify the industrial-temperature XC3S250E-4PQG208I after checking system qualification and production availability.
What is the lead time for XC3S250E-4PQG208C?
The current lead time for XC3S250E-4PQG208C must be confirmed for the requested quantity, package marking, and quality requirements. AMD’s package-discontinuation notice identifies PQ(G)208 production as affected, so the part may be unavailable as a standard new-production item. Use the Request a Quote form on this page to state the quantity, target delivery date, and traceability requirements, and request factory-new, programmed, or legacy inventory only through a formally traceable channel.
Where can I buy XC3S250E-4PQG208C online?
Use the Request a Quote form on this page to inquire about the XC3S250E-4PQG208C and specify the required quantity, package condition, date code, traceability, and target delivery date. Because the 208-pin PQG208 package was discontinued, availability can depend on legacy inventory rather than current mass-production allocation. A quotation response should clearly state whether the offered device is new surplus, factory-new, or previously programmed, together with any inspection requirements.
What is the price of XC3S250E-4PQG208C?
The current commercial price for XC3S250E-4PQG208C depends on quantity, device condition, date-code requirements, inspection, and traceability. The Request a Quote form on this page is the appropriate route for a transaction-ready quotation. Because the PQ(G)208 package has been discontinued, distinguish current legacy inventory from devices that are new production, recovered, programmed, or unverified. Those conditions can materially change what a fair quotation should include.
Is XC3S250E-4PQG208C in stock?
Stock for XC3S250E-4PQG208C must be confirmed for the exact device condition and quantity through the Request a Quote form on this page. The AMD discontinuation notice states that the PQ(G)208 package line was discontinued and that no compatible replacements exist for affected products. Any available inventory may therefore be legacy stock with specific date codes or traceability constraints. State whether unused devices, recovered devices, or factory-new devices are acceptable.
What is the best AMD equivalent for XC3S250E-4PQG208C?
The best same-footprint AMD candidate is the XC3S250E-4PQG208I because it preserves the Spartan-3E 250K architecture, -4 speed grade, and 208-pin PQG package while changing the temperature grade. The XC3S250E-4PQ208C is another package-suffix variant with the same -4 performance class. Neither change extends the discontinued package line. If no new PQ(G)208 device can be secured, migrate to a BGA Spartan-3E option only with a revised PCB and a complete timing, I/O, and configuration review.
How does the XC3S250E-4PQG208C support clocking and configuration?
The XC3S250E-4PQG208C uses the Spartan-3E programmable-logic architecture and includes dedicated clock and configuration resources defined in the AMD DS312 family data sheet. Its 612 CLBs and 5,508 logic cells can implement multiple clock domains, while block RAM and dedicated multipliers support local data storage and arithmetic. Configuration pins, clock inputs, supply rails, and user I/O must be assigned according to the package pin table, and the clock requirements of the selected design must be checked against the applicable speed grade.
Can XC3S250E-4PQG208C be used in a new 208-pin PQFP design?
Yes, the device can be used in a new 208-pin PQFP design if the exact suffix, footprint, electrical limits, configuration method, and operating grade match the design requirements. Use the AMD DS312 package drawings and pin definitions to create or verify the CAD footprint, including the 0.5 mm lead pitch. Because the package is discontinued, new production has supply risk; consider a currently supported device in a BGA package unless retaining the legacy footprint is essential.
What tool compatibility should be checked for XC3S250E-4PQG208C?
Use an AMD or Xilinx-compatible FPGA design flow that supports the Spartan-3E family and the XC3S250E device. The toolchain must support the selected bitstream, configuration settings, and the -4 speed grade, and it should be tested with the exact package pinout used on the board. For legacy products, confirm that the installed synthesis, implementation, simulation, and programming tools remain operational and that programming hardware supports the device’s configuration interface.

के लिए इंजीनियरिंग संदर्भ डेटा XC3S250E-4PQG208C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the XC3S250E-4PQG208C when maintaining a 208-pin PQFP Spartan-3E design that requires 250,000 system gates, 5,508 logic cells, 612 CLBs, and the -4 performance grade. The XC3S250E-4PQ208C is a close option when the PQ208 ordering suffix is acceptable, while the XC3S250E-4PQG208I is preferable when industrial-temperature coverage is required. Select a -5 suffix when the higher performance grade is needed and timing is revalidated for the exact package. None of these choices restores the discontinued PQ(G)208 package line, so inventory continuity remains a constraint. For a new product without an existing footprint, prefer a currently supported FPGA family because modern devices offer broader tooling, integrated memory, faster transceivers, stronger software ecosystems, and improved long-term supply planning.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XC3S250E-4PQ208C XC3S250E-4PQG208I XC3S250E-4PQG208IS1 XC3S250E-5PQ208C XC3S250E-5PQG208C
Package 208-pin PQFP 208-pin PQFP 208-pin PQFP 208-pin PQFP 208-pin PQFP 208-pin PQFP
Brand AMD AMD AMD AMD AMD AMD
Device Family Spartan-3E Spartan-3E Spartan-3E Spartan-3E Spartan-3E Spartan-3E
System Gates 250,000 gates 250,000 gates 250,000 gates 250,000 gates 250,000 gates 250,000 gates
Logic Cells 5,508 cells 5,508 cells 5,508 cells 5,508 cells 5,508 cells 5,508 cells
Configurable Logic Blocks 612 CLBs 612 CLBs 612 CLBs 612 CLBs 612 CLBs 612 CLBs
Speed Grade -4 -4 -4 -4 -5 -5
Core Supply Voltage 1.2 V nominal 1.2 V nominal 1.2 V nominal 1.2 V nominal 1.2 V nominal 1.2 V nominal
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
I/O Count 158 inputs, 126 outputs 158 inputs, 126 outputs 158 inputs, 126 outputs 158 inputs, 126 outputs 158 inputs, 126 outputs 158 inputs, 126 outputs

मुख्य विशेषताएँ

  • Retains the exact 208-pin PQFP footprint for legacy PCB reuse (बनामXC3S250E-4PQG208I)
  • Provides 250,000 system gates in a mature Spartan-3E architecture (बनामXC3S250E-5PQ208C)
  • Matches the original commercial-grade ordering configuration (बनामXC3S250E-4PQ208C)
  • Provides a higher-performance grade option for timing upgrades (बनामXC3S250E-4PQG208C)

डिज़ाइन नोट्स

Create the PCB footprint from the AMD PQ208 mechanical drawing rather than relying only on a generic PQFP library symbol. Verify the 0.5 mm lead pitch, lead width, exposed-body dimensions, and courtyard across all four sides. The 208-pin package is large enough that assembly tolerances and solder-paste volume matter, so confirm the board outline, component placement clearance, and reflow profile against the assembly process before releasing fabrication files.

Route the 1.2 V core supply and all required I/O supplies as separate power networks with local bulk and high-frequency decoupling at each supply pin. Place the smallest ceramic capacitors directly beside the corresponding pins and connect their ground returns through the shortest available path. Do not infer a complete decoupling network from package capacitance alone; follow the Spartan-3E DS312 recommendations and the actual FPGA vendor requirements for the selected board density.

Route clock inputs as controlled-impedance nets with short stubs, continuous reference planes, and symmetric via transitions. Avoid routing high-speed clocks adjacent to configuration pins or unrelated switching outputs. For any differential I/O or source-synchronous interface, use the package assignment rules and exact -4 speed-grade timing constraints from DS312. A mechanically correct footprint alone does not guarantee signal integrity or timing closure.

Do not assume every XC3S250E suffix is interchangeable without checking the ordering code, temperature grade, package marking, configuration method, and timing tables. In particular, PQ208 and PQG208 ordering codes and C, I, and S1 suffixes can represent commercial, industrial, or ordering-specific distinctions. Preserve the original bitstream configuration mode and perform a complete post-replacement validation covering startup, clocking, I/O standards, boundary behavior, and system timing.

Assign configuration pins and their pull-up or pull-down networks before placing the programmable I/O, because configuration behavior is part of the device startup contract. Keep configuration-path traces away from aggressive switching nets, provide a defined startup state on every configuration input, and verify the selected programming interface against the board’s connector and level requirements. For field upgrades, test all supported configuration modes and verify that the programmed bitstream matches the exact device revision.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The AMD discontinuation notice confirms that the PQ(G)208 package production line was discontinued. No additional RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status is stated for this exact ordering code.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

xc3s250e 4pqg208c xc3s250e datasheet xc3s250e 4tqg144c xc3s250e 4vqg100c xc3s250e 4ftg256i xc3s250e 4cpg132i XC3S250E-4PQG208C datasheet XC3S250E-4PQG208C pinout XC3S250E-4PQG208C equivalent XC3S250E-4PQG208C replacement XC3S250E-4PQG208C price AMD XC3S250E-4PQG208C

संबंधित कंपोनेंट्स और शब्द

AMD XC3S250E-4PQG208C XC3S250E-4PQ208C XC3S250E-4PQG208I XC3S250E-4PQG208IS1 XC3S250E-5PQ208C XC3S250E-5PQG208C Spartan-3E field-programmable gate array FPGA programmable logic device CMOS integrated circuit semiconductor system gates logic cells configurable logic block CLB block RAM dedicated multiplier 90 nm CMOS 1.2 V core supply 572 MHz maximum clock 208-pin PQFP surface mount industrial automation data acquisition signal processing RoHS REACH AEC-Q100
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें