XC3S250E-4PQG208C - 250K Gate Spartan-3E FPGA | AMD
N.º da peça: XC3S250E-4PQG208C ✗ Fim de vidaXC3S250E-4PQG208C Visão geral
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a complementary metal-oxide-semiconductor integrated circuit. Spartan-3E devices combine configurable logic blocks, programmable I/O, block RAM, dedicated multipliers, and clock-management resources in a single package, allowing hardware behavior to be revised without changing the printed circuit board.
The XC3S250E provides 158 inputs, 126 outputs, 612 CLBs, and 5,508 logic cells. Its 250,000 equivalent system gates support control logic, data acquisition, communications, interface bridging, embedded signal processing, and general-purpose prototype platforms. The 1.2 V supply requirement reflects the low-voltage core architecture, while the PQFP package provides 0.5 mm lead pitch and a surface-mount form factor suitable for multilayer boards and conventional assembly processes.
The -4 speed designation identifies the device performance grade, while the PQG208 package code identifies the 208-pin PQFP configuration. The final C suffix denotes the commercial temperature grade. According to the AMD Spartan-3E family data sheet DS312, the device also includes dedicated multipliers and block RAM, making it suitable for designs that require deterministic parallel logic rather than a soft processor alone.
Typical applications include industrial automation controllers, data-acquisition systems, communication equipment, test and measurement instruments, and embedded control systems. Engineers can use its programmable logic for protocol termination, data filtering, clock-domain interfaces, and parallel-to-serial conversion while preserving deterministic timing. The package also permits inspection and rework more readily than many fine-pitch ball-grid-array FPGA packages.
When laying out the board, use the DS312 pinout and package drawing to assign power, ground, configuration, clock, and I/O signals. Keep core and I/O supply planes properly decoupled, provide all required configuration pins with valid levels during startup, and route high-speed clocks and differential-capable pairs according to the family guidance. Confirm that the selected board-generation tool and bitstream support this device before layout release.
This product page combines device specifications, package details, replacement guidance, comparison parameters, and practical PCB considerations. It also distinguishes true same-footprint Spartan-3E options from alternatives requiring a package conversion or redesign, helping engineers preserve existing 208-pin PQFP hardware where possible.
Alternativas drop-in para XC3S250E-4PQG208C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
XC3S250E-4PQ208C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-4PQG208I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S250E-4PQG208IS1
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-5PQ208C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S250E-5PQG208C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-4PQG208C Classificações máximas e características elétricas
| Device Type | Spartan-3E Field Programmable Gate Array (FPGA) |
| System Gates | 250,000 gates |
| Logic Cells | 5,508 cells |
| Configurable Logic Blocks | 612 CLBs |
| Frequência máxima de clock | 572 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V nominal |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Number of Inputs | 158 inputs |
| Número de saídas | 126 outputs |
| Encapsulamento | 208-pin PQFP, 0.5 mm lead pitch |
| Tipo de montagem | Surface mount |
| Temperature Grade | Commercial |
| Speed Grade | -4 |
| Device Family | Spartan-3E |
| Programmable Logic Resources | 5,508 logic cells |
| I/O Count | 284 total inputs and outputs |
Guia de Configuração de Pinos do XC3S250E-4PQG208C 208-pin pqfp, 0.5 mm lead pitch
Configuração de pinos para XC3S250E-4PQG208C (pacote 208-pin pqfp, 0.5 mm lead pitch). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC3S250E-4PQG208C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC3S250E-4PQG208C é adequado para 6 aplicaçãos: Industrial Automation Controller, Data-Acquisition System, Communication Interface, Test and Measurement Instrument, Embedded Signal Processing, Legacy Control Platform.
Industrial Automation Controller
The XC3S250E-4PQG208C is well suited to industrial automation logic because its 612 CLBs and 5,508 logic cells can implement parallel sequencing, machine-state control, interlocks, and communication logic without a separate processor. A typical design would allocate CLBs for motion sequencing and digital I/O, while block RAM supports buffers and programmable logic blocks handle arithmetic. The 208-pin PQFP offers 158 inputs and 126 outputs, providing substantial board-level connectivity. Because the -4 version is commercial grade, confirm the enclosure temperature and select the industrial suffix when wider environmental coverage is required.
Recomendado
Data-Acquisition System
The XC3S250E-4PQG208C can serve as the digital backbone of a parallel data-acquisition system. Its 158 inputs and 126 outputs support multiple converter channels, capture-control signals, memory addressing, and host interfaces, while the 572 MHz maximum clock allows timing logic to operate well above typical data-conversion rates. Designers can use programmable logic for channel interleaving, filtering, trigger capture, and data packing. The 1.2 V core and 90 nm CMOS implementation require careful decoupling and clock routing, but the PQFP package simplifies board inspection compared with fine-pitch BGA devices.
Recomendado
Communication Interface
The XC3S250E-4PQG208C is suitable for legacy communication interfaces that benefit from dedicated parallel hardware rather than a high-power processor. Its 5,508 logic cells can implement protocol framing, CRC generation, packet buffering, clock-domain crossing, and parallel-to-serial conversion. The 612 CLBs allow multiple channels to operate concurrently, while block RAM and dedicated multipliers can assist with payload handling and filtering. Designers should verify that the selected I/O standard, clock topology, and -4 timing margin meet the interface specification before releasing the PCB.
Recomendado
Test and Measurement Instrument
The XC3S250E-4PQG208C can implement deterministic sequencing, pattern generation, and acquisition control in test and measurement equipment. Its parallel architecture is useful for digital pattern engines, timing generators, instrument-bus interfaces, and control of external converters. The 250,000-system-gate device provides enough logic for concurrent measurement channels without relying on software timing, and the 208-pin PQFP package supports controlled routing of numerous high-speed and static signals. Critical clock and I/O paths should be reviewed against the DS312 timing tables for the exact -4 speed grade.
Recomendado
Embedded Signal Processing
The XC3S250E-4PQG208C supports parallel embedded signal-processing pipelines where deterministic latency and dedicated arithmetic resources are valuable. With 612 CLBs, 5,508 logic cells, block RAM, and dedicated multipliers, the FPGA can implement FIR filters, correlators, digital modulation, or fixed-point arithmetic stages alongside a control processor. A 1.2 V core and 90 nm CMOS implementation make careful clock-tree and power planning important, especially when multipliers and RAM operate concurrently. Designers should compare the tool-generated timing report with the system clock requirement before hardware release.
Recomendado
Legacy Control Platform
The XC3S250E-4PQG208C is especially relevant when maintaining a control platform whose PCB already uses the Spartan-3E 208-pin PQFP footprint. It can reproduce deterministic control, interlock, sequencing, and peripheral-interface functions while avoiding a board redesign when the XC3S250E-4PQG208C or a verified suffix variant is available. Engineers should preserve the original configuration scheme, pin assignments, I/O standards, and timing assumptions. Because AMD discontinued the PQ(G)208 package line, long-term support planning should include qualification of inventory and a migration path to a currently supported package.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC3S250E-4PQG208C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC3S250E-4PQ208C | XC3S250E-4PQG208I | XC3S250E-4PQG208IS1 | XC3S250E-5PQ208C | XC3S250E-5PQG208C |
|---|---|---|---|---|---|---|
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E |
| System Gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates |
| Logic Cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells |
| Configurable Logic Blocks | 612 CLBs | 612 CLBs | 612 CLBs | 612 CLBs | 612 CLBs | 612 CLBs |
| Speed Grade | -4 | -4 | -4 | -4 | -5 | -5 |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| I/O Count | 158 inputs, 126 outputs | 158 inputs, 126 outputs | 158 inputs, 126 outputs | 158 inputs, 126 outputs | 158 inputs, 126 outputs | 158 inputs, 126 outputs |
Principais diferenciais
- Retains the exact 208-pin PQFP footprint for legacy PCB reuse (vs XC3S250E-4PQG208I)
- Provides 250,000 system gates in a mature Spartan-3E architecture (vs XC3S250E-5PQ208C)
- Matches the original commercial-grade ordering configuration (vs XC3S250E-4PQ208C)
- Provides a higher-performance grade option for timing upgrades (vs XC3S250E-4PQG208C)
Notas de projeto
Create the PCB footprint from the AMD PQ208 mechanical drawing rather than relying only on a generic PQFP library symbol. Verify the 0.5 mm lead pitch, lead width, exposed-body dimensions, and courtyard across all four sides. The 208-pin package is large enough that assembly tolerances and solder-paste volume matter, so confirm the board outline, component placement clearance, and reflow profile against the assembly process before releasing fabrication files.
Route the 1.2 V core supply and all required I/O supplies as separate power networks with local bulk and high-frequency decoupling at each supply pin. Place the smallest ceramic capacitors directly beside the corresponding pins and connect their ground returns through the shortest available path. Do not infer a complete decoupling network from package capacitance alone; follow the Spartan-3E DS312 recommendations and the actual FPGA vendor requirements for the selected board density.
Route clock inputs as controlled-impedance nets with short stubs, continuous reference planes, and symmetric via transitions. Avoid routing high-speed clocks adjacent to configuration pins or unrelated switching outputs. For any differential I/O or source-synchronous interface, use the package assignment rules and exact -4 speed-grade timing constraints from DS312. A mechanically correct footprint alone does not guarantee signal integrity or timing closure.
Do not assume every XC3S250E suffix is interchangeable without checking the ordering code, temperature grade, package marking, configuration method, and timing tables. In particular, PQ208 and PQG208 ordering codes and C, I, and S1 suffixes can represent commercial, industrial, or ordering-specific distinctions. Preserve the original bitstream configuration mode and perform a complete post-replacement validation covering startup, clocking, I/O standards, boundary behavior, and system timing.
Assign configuration pins and their pull-up or pull-down networks before placing the programmable I/O, because configuration behavior is part of the device startup contract. Keep configuration-path traces away from aggressive switching nets, provide a defined startup state on every configuration input, and verify the selected programming interface against the board’s connector and level requirements. For field upgrades, test all supported configuration modes and verify that the programmed bitstream matches the exact device revision.
Informações de conformidade
The AMD discontinuation notice confirms that the PQ(G)208 package production line was discontinued. No additional RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status is stated for this exact ordering code.