XC5VLX30-3FF324C - Virtex-5 LX 30K Logic Cell FPGA, 324-BBGA
MPN: XC5VLX30-3FF324C ✗ जीवन की समाप्तिXC5VLX30-3FF324C अवलोकन
An FPGA (field-programmable gate array) is a programmable logic device: a matrix of configurable logic blocks (CLBs) and programmable interconnect that can be reconfigured at the field to implement any digital design from a single HDL source. In the Xilinx hierarchy, Virtex-5 LX is a general-purpose platform family that sits above the smaller Spartan-3 family and below the larger Virtex-5 LXT/SXT and Virtex-6 device families. The Virtex-5 LX family targets networking, telecommunications, industrial control, and embedded systems requiring medium logic density with high-speed serial and memory resources.
Key features of the XC5VLX30-3FF324C include 30,720 logic cells organized in 4,800 4-input LUTs, 1,179,648 bits (1.125 Mbit) of 18 Kb block RAM, and 220 I/O distributed across the 324-BBGA package. The -3 speed suffix denotes the faster of the standard Virtex-5 LX performance grades. The device is offered in a monolithic 324-ball FCBGA package with a square body and ball terminals.
Architecturally, the XC5VLX30 uses the ASMBL column-based fabric, with configurable logic blocks, dedicated 18 Kb block RAM tiles, 18x18 multiplier accumulators, and dedicated distributed RAM per LUT. Because the fabric is column-based, routing between columns is highly regular and repeatable, which simplifies timing closure compared with row-based fabrics of the previous generation.
Typical applications include network interface and line-card designs, industrial control and test equipment, telecom baseband and cross-connect equipment, mid-range embedded video processing, and any design needing a mid-density programmable logic engine in a single 324-ball package.
A key design consideration is that the Virtex-5 LX family is a mature generation: new designs should be reviewed against current-generation AMD devices where board area, power, and toolchain support allow, while existing Virtex-5 platforms can reuse the same pinout and bitstream tool flow.
This page consolidates parametric details, drop-in replacement candidates for the 324-BBGA footprint, and practical design guidance that is not assembled in one place in the manufacturer documentation.
के लिए ड्रॉप-इन विकल्प XC5VLX30-3FF324C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC5VLX30-3FF324C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Device Type, RoHS Status, Speed Grade, Architecture.
XC5VLX30-3FFG324C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX30-3FF324I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX30-3FFG324I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX30-2FF324C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XC5VLX30-2FFG324C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX30-1FFG324C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX30-1FF324C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX30-3FF324C Maximum Ratings और Electrical Characteristics
| Device Type | Field Programmable Gate Array (FPGA) |
| Family | Virtex-5 LX |
| Manufacturer | AMD / Xilinx |
| Number of Logic Cells | 30,720 |
| Number of I/O | 220 |
| Block RAM | 1,179,648 bits (1.125 Mbit) |
| पैकेज | 324-BBGA, FCBGA |
| Number of Terminals | 324 |
| Terminal Form | Ball |
| Package Shape | Square |
| Speed Grade | -3 |
| Architecture | ASMBL column-based, second generation |
| माउंटिंग प्रकार | Surface Mount (BGA) |
| RoHS स्थिति | RoHS Non-Compliant |
| Lead Free Status | Contains Lead |
XC5VLX30-3FF324C square पिन कॉन्फ़िगरेशन गाइड
XC5VLX30-3FF324C (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC5VLX30-3FF324C.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC5VLX30-3FF324C के लिए उपयुक्त है 6 अनुप्रयोगs: Telecom Line-Card and Cross-Connect Equipment, Industrial Control and Test Equipment, Video and Image Processing Pipelines, Networking and Packet Processing, Aerospace and Defense Avionics Support, Embedded Platform Consolidation.
Telecom Line-Card and Cross-Connect Equipment
The XC5VLX30-3FF324C fits line-card and digital cross-connect designs where a single device must host both control logic and parallel packet handling. Its 30,720 logic cells cover clock generation, framing, and queueing logic, while 1,179,648 bits of block RAM absorb line buffers and statistics counters without external SRAM. The -3 speed grade gives margin on 100 MHz-plus datapaths, and the 220 I/O in the 324-BBGA package support parallel backplane or line-card bus interfaces. Because the column-based ASMBL routing is regular and repeatable, timing closure across a large fabric is more predictable than on older row-based devices.
अनुशंसित
Industrial Control and Test Equipment
Machine vision controllers, data acquisition front ends, and automated test equipment rely on many parallel sensor and actuator lines plus deterministic timing. The XC5VLX30-3FF324C provides 220 I/O in a single 324-ball FCBGA, allowing several interface standards to be consolidated on one board without level-shifter sprawl. Its block RAM can hold capture buffers and calibration tables while the CLB fabric runs sequencing state machines, and the -3 grade tightens setup and hold margin on clocked interfaces such as parallel ADC data buses and motor-control PWM generation. The single-package footprint also reduces board area compared with splitting logic and memory across multiple devices.
अनुशंसित
Video and Image Processing Pipelines
Mid-resolution video processing, scaling, and pixel-format conversion tasks map well onto the XC5VLX30-3FF324C, where parallel pixel pipelines and line buffers dominate the resource mix. The 30,720 logic cells absorb horizontal and vertical resampling filters plus color-space conversion, while the 1.125 Mbit of block RAM is sufficient for multiple line buffers and frame-schedule descriptors. The -3 speed grade helps sustain full-rate pixel clocks in an unmodified fabric. The device fits when the design needs more parallelism than a microcontroller offers but does not justify the power and cost of a larger device, and the 220 I/O allow parallel RGB, BT.601/112, or serialized link interfaces to be wired directly.
अनुशंसित
Networking and Packet Processing
Ethernet bridges, protocol converters, and traffic managers benefit from having full-rate packet buffers on-chip. In the XC5VLX30-3FF324C, the 1,179,648 bits of block RAM serve as descriptor FIFOs and line buffers while the logic fabric implements MAC, CRC, and header parsing engines, avoiding off-chip memory traffic on hot paths. The 220 available I/O accommodate parallel RGMII/GMII-style data buses plus PHY control signals without multiplexing. The -3 speed grade supports 125 MHz-class internal clocks with timing margin, and the column-based fabric gives consistent routing delays that simplify pipelining across the device.
अनुशंसित
Aerospace and Defense Avionics Support
Avionics subsystems such as radar signal conditioning, display drivers, and sensor fusion front ends benefit from reprogrammable logic that can be re-qualified for mission variants without respinning hardware. The XC5VLX30-3FF324C offers 30,720 logic cells for parallel datapath stages and 1.125 Mbit of block RAM for trace and echo buffers, with the -3 grade preserving timing margin on wide synchronous interfaces. The 324-BBGA package keeps the design compact for ruggedized boards. Where the design requires extended-temperature operation, the same footprint is available in the I temperature grade, and where lead-free assembly is mandated the FFG324C ordering code provides the equivalent device.
अनुशंसित
Embedded Platform Consolidation
Many embedded platforms need to consolidate a microcontroller, glue logic, and peripheral bridges onto one device. The XC5VLX30-3FF324C can host bus bridges, DMA engines, watchdog and reset logic, plus custom accelerators, while the 220 I/O accommodate several peripheral buses. Pairing the FPGA with an external microcontroller such as an STM32F103 or LPC1830 keeps the supervisory workload in a familiar environment while offloading deterministic datapath work to the programmable fabric. The -3 grade preserves margin for pipelined accelerators, and the single 324-BBGA device reduces component count and interconnect routing on space-constrained control boards.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC5VLX30-3FF324C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC5VLX30-3FFG324C | XC5VLX30-3FF324I | XC5VLX30-3FFG324I | XC5VLX30-2FF324C | XC5VLX30-1FFG324C |
|---|---|---|---|---|---|---|
| Package | 324-BBGA (FCBGA) | 324-BBGA (FCBGA) - same | 324-BBGA (FCBGA) - same | 324-BBGA (FCBGA) - same | 324-BBGA (FCBGA) - same | 324-BBGA (FCBGA) - same |
| Brand | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| Speed Grade | -3 | -3 | -3 | -3 | -2 | -1 |
| Logic Cells | 30,720 | 30,720 | 30,720 | 30,720 | 30,720 | 30,720 |
| Number of I/O | 220 | 220 | 220 | 220 | 220 | 220 |
| Block RAM | 1,179,648 bits (1.125 Mbit) | 1,179,648 bits (1.125 Mbit) | 1,179,648 bits (1.125 Mbit) | 1,179,648 bits (1.125 Mbit) | 1,179,648 bits (1.125 Mbit) | 1,179,648 bits (1.125 Mbit) |
| RoHS Status | RoHS Non-Compliant (contains lead) | Lead-free ordering code | RoHS Non-Compliant | Lead-free ordering code | RoHS Non-Compliant | Lead-free ordering code |
| Temperature Grade | Commercial (C suffix) | Commercial (C suffix) | Industrial (I suffix) | Industrial (I suffix) | Commercial (C suffix) | Commercial (C suffix) |
| Architecture / Family | Virtex-5 LX, ASMBL column-based | Virtex-5 LX, ASMBL column-based | Virtex-5 LX, ASMBL column-based | Virtex-5 LX, ASMBL column-based | Virtex-5 LX, ASMBL column-based | Virtex-5 LX, ASMBL column-based |
| Configuration Interface Support | JTAG and configuration via Virtex-5 tools | JTAG and configuration via Virtex-5 tools | JTAG and configuration via Virtex-5 tools | JTAG and configuration via Virtex-5 tools | JTAG and configuration via Virtex-5 tools | JTAG and configuration via Virtex-5 tools |
मुख्य विशेषताएँ
- Direct lead-free drop-in on the identical 324-BBGA footprint (बनामXC5VLX30-3FFG324C)
- Industrial-temperature option on the same board without redesign (बनामXC5VLX30-3FF324I)
- Full -3 speed grade performance versus slower drop-ins (बनामXC5VLX30-1FFG324C)
- Same-package -2 grade option for cost-sensitive builds (बनामXC5VLX30-2FF324C)
- Mid-density integration reduces component count (बनामEP3C25F324C7)
डिज़ाइन नोट्स
The 324-BBGA land pattern demands a via-in-pad or buried-via structure under the device to survive board bending and improve thermal performance. Define the pad stack and solder-mask opening per the Virtex-5 324-BBGA package specification, control the solder paste volume per ball to avoid voiding under the array, and plan X-ray inspection after reflow because hidden joints cannot be visually verified. Keep the perimeter escape traces short and matched, since 220 active I/O leave little room for long fan-out routing.
Estimate the XC5VLX30-3FF324C core and I/O supply budget before layout, since Virtex-5 LX current draw scales with speed grade, configured logic, and I/O toggle rate. Build the power tree so the core rail is supplied from a low-noise regulator and the I/O rails are separated from sensitive analog domains with ferrite filtering and local decoupling. Place the supply caps directly under the associated BGA power balls rather than at the board edge to keep the supply loop area small.
Plan configuration and JTAG access early, because the dedicated configuration pins on the 324-BBGA are fixed by the ball map and cannot be reassigned. Provide a reachable header or pogo fixture for the JTAG chain, and if the platform supports field reconfiguration, reserve space for a configuration flash device and its bus on the board rather than assuming the same pin assignment will be free later. Also confirm the pinout rows for the exact ordering code before release, since the FF, FFG, and I variants share the same package.
Estimated: with a -3 grade Virtex-5 LX device at roughly 1 W to 1.5 W total dissipation and the exposed land behaviour of the 324-BBGA, junction temperature rise stays modest provided the PCB provides a continuous thermal plane under the device. Because the exact theta_JA depends on the stack-up and copper area, confirm the number with the package thermal model for your board rather than assuming, and keep the area under the device free of thermal relief slots.
Two classic mistakes occur with this device. First, the lead-containing FF324C finish is catalogued as RoHS non-compliant, so a lead-free assembly flow should use the FFG324C ordering code on the same footprint. Second, mixing -1, -2, and -3 grades on one board is mechanically fine but changes timing; regenerate timing constraints and rerun static timing analysis for each speed grade you plan to populate, and avoid assuming -1 timing closure carries over to -3 or the reverse.
अनुपालन जानकारी
The FF324C ordering code is catalogued as RoHS non-compliant with a lead-containing finish; the lead-free FFG324C ordering code is the drop-in path for RoHS-compliant assemblies. AEC-Q100 does not apply to this industrial/commercial FPGA family.
