AMD

XCKU11P-1FFVD900I - 408-I/O Kintex UltraScale+ FPGA | AMD

MPN: XCKU11P-1FFVD900I ✓ सक्रिय
900-BBGA FCBGA Package -1 Speed 53,964,800 bits Memory
न्यूनतम ऑर्डर मात्रा: 1 |

XCKU11P-1FFVD900I अवलोकन

The AMD XCKU11P-1FFVD900I is a Kintex UltraScale+ field-programmable gate array with 408 logic cells, 408 I/O, 53,964,800 bits of on-chip memory, and 900 terminals in a 900-BBGA FCBGA package. The -1 speed designation and I industrial temperature suffix identify its configuration, while the -FFVD900I package code corresponds to the square 900-ball land pattern used by this device.

A field-programmable gate array is a semiconductor whose logic, interconnect, memory, and I/O resources can be configured after manufacture. The FPGA hierarchy progresses from a programmable logic device to an FPGA, then to a configurable SoC platform when processors, programmable logic, memory, and high-speed I/O are integrated. The XCKU11P-1FFVD900I belongs to AMD's Kintex UltraScale+ family, combining parallel programmable logic with high-speed serial connectivity and substantial block RAM.

The device provides 408 logic cells and 53,964,800 bits of on-chip memory. Its 408 I/O supports connections to external processors, memory, sensors, network transceivers, and industrial peripherals. The 900-BBGA FCBGA package concentrates a large number of connections in a compact square land pattern, reducing package size while increasing the complexity of escape routing and demanding careful PCB-layer planning.

The -1 ordering code denotes the device speed grade, while the final I suffix identifies the industrial temperature option. A factory-programmed configuration is normally identified by an additional configuration-memory suffix, so engineers should distinguish the base FPGA orderable part from a specific programmed configuration when reviewing bills of materials or replacement requirements.

Typical uses include industrial control, test and measurement, high-throughput digital signal processing, embedded vision, communications infrastructure, and data-acquisition systems. The 408-I/O resource count is particularly useful for designs combining multiple bus interfaces, parallel ADC or DAC connections, and high-speed serial links. The 900-ball package also makes thermal design, assembly, inspection, and board redesign more demanding than it would be for a leaded device.

PCB implementation should use manufacturer-published escape routing, power-decoupling, and ball-assignment data. Validate every high-speed lane against the UltraScale+ transceiver constraints, preserve the recommended power and ground-plane topology, and confirm the assembled board's thermal performance before production. Use AMD's package pinout files and UG575 when assigning signals and validating the physical design.

This product record combines the verified device identity, 900-FCBGA package information, public documentation links, and engineering-oriented application guidance. It also distinguishes the target ordering code from same-family alternatives so procurement and engineering teams can evaluate speed-grade, temperature-grade, and logic-capacity tradeoffs without confusing a functional family member with a true drop-in replacement.

के लिए ड्रॉप-इन विकल्प XCKU11P-1FFVD900I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XCKU11P-1FFVD900I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Logic Cells, Mounting Type, Package Type, Programmable Logic.

AMD
Device Type: Kintex UltraScale+ field-programmable gate array
Mounting Type: Surface mount
Package Type: Ball grid array
इसके साथ तुलना करें XCKU11P-1FFVD900I →

XCKU11P-1FFVD900E

✅ ड्रॉप-इन
AMD
📦 900-BBGA FCBGA
Kintex UltraScale+ field-programmable gate array · 653,100 cells · Kintex UltraScale+ · -1 · 900-BBGA FCBGA · Ball grid array · 900 balls · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XCKU11P-L1FFVD900I

✅ ड्रॉप-इन
AMD
📦 900-BBGA FCBGA
Kintex UltraScale+ field-programmable gate array · 653,100 LEs · 37,320 LABs/CLBs · 408 pins · 53,964,800 bits · 900-FCBGA, 31 x 31 mm · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XCKU5P-1FFVD900I

✅ ड्रॉप-इन
AMD
📦 900-BBGA FCBGA
Kintex UltraScale+ field-programmable gate array · 474,600 cells · 27,120 CLBs · 20 nm · 0.72 V · -1 · FCBGA · 900 balls

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XCKU11P-1FFVD900I Maximum Ratings और Electrical Characteristics

Device Type Kintex UltraScale+ field-programmable gate array (FPGA)
Logic Cells 408 cells
I/O Count 408 I/O
On-Chip Memory 53,964,800 bits
पैकेज 900-BBGA FCBGA
Terminal Count 900 terminals
Package Shape Square
Terminal Form Ball
Temperature Grade Industrial
Speed Grade -1
माउंटिंग प्रकार Surface-mount BGA
Programmable Logic 408 cells
Block RAM 53,964,800 bits
User I/O 408 I/O
Series Kintex UltraScale+

XCKU11P-1FFVD900I square पिन कॉन्फ़िगरेशन गाइड

XCKU11P-1FFVD900I (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XCKU11P-1FFVD900I के लिए square पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XCKU11P-1FFVD900I.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XCKU11P-1FFVD900I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control and Automation, Data Acquisition Systems, Test and Measurement Equipment, High-Speed Communications Equipment, Embedded Vision and Image Processing, Aerospace and Defense Processing.

🏭

Industrial Control and Automation

The AMD XCKU11P-1FFVD900I fits industrial controllers that combine multiple machine interfaces with deterministic programmable logic. Its 408 logic cells provide room for parallel control pipelines, while 408 I/O and 53,964,800 bits of embedded memory support communication bridges, timing functions, and local data buffering. The industrial-temperature I suffix suits controlled factory environments. Place the 900-BBGA device on a multilayer PCB with continuous power planes, short decoupling connections, and isolated high-speed routes. Validate timing against the selected -1 speed grade and confirm thermal performance under worst-case switching activity.

📊

Data Acquisition Systems

The XCKU11P-1FFVD900I can coordinate parallel data-acquisition pipelines requiring 408 user I/O and substantial internal storage. Logic cells can implement triggering, channel sequencing, digital filtering, and data-format conversion, while 53,964,800 bits of memory can buffer samples before DMA transfer. The 408-I/O count provides connectivity to multiple converters and interface devices without requiring an external fabric. Keep analog and digital return paths separated in the stack-up, and use AMD's package files to route acquisition inputs and high-speed interfaces correctly. Confirm converter timing, channel count, and bandwidth during architecture reviews.

🖥️

Test and Measurement Equipment

The AMD XCKU11P-1FFVD900I is suitable for modular test and measurement equipment where parallel instruments, pattern generation, and acquisition must be coordinated by programmable logic. The 408-I/O resource set supports digital channels, triggers, and instrument control, while the 408 logic cells can execute concurrent control and data-processing functions. The 900-BBGA package supports dense routing but requires disciplined high-speed layout, adequate power delivery, and assembly process control. Use Vivado timing analysis for every implemented interface and verify that the industrial-grade component remains within its temperature limits during long-duration measurements.

🌐

High-Speed Communications Equipment

The XCKU11P-1FFVD900I can support communications infrastructure requiring programmable packet processing, parallel interfaces, and high-speed serial connectivity. Its 408 logic cells and 53,964,800 bits of on-chip memory are useful for framing, buffering, and protocol functions, while 408 I/O provide broad system connectivity. UltraScale+ transceiver resources and package-specific constraints must be evaluated against the intended link rate and lane count. Route high-speed differential pairs according to AMD's UltraScale+ guidelines, maintain continuous reference planes, and validate channel loss, skew, and return loss with the actual PCB stack-up.

📷

Embedded Vision and Image Processing

The AMD XCKU11P-1FFVD900I can support embedded vision front ends that combine pixel transport, feature extraction, and control logic. The 408 user I/O accommodate camera interfaces and parallel sensors, while the embedded memory provides local line buffers or feature storage. Its 408 logic cells allow substantial parallel datapaths when a dedicated processor is not required for every operation. High-speed sensor clocks and links must be routed with continuous reference planes and matched length or equalization according to the selected interface standard. Validate the complete image pipeline in Vivado and perform thermal testing at the highest expected frame rate.

✈️

Aerospace and Defense Processing

The XCKU11P-1FFVD900I can serve as a programmable processing element in aerospace, defense, and rugged embedded systems when its documented electrical and environmental ratings match the mission. The 408 logic cells support real-time datapaths, 408 I/O connect sensors and actuators, and 53,964,800 bits of memory support deterministic buffering. The I suffix identifies the industrial option, not automatic aerospace qualification. Program-level evidence, radiation analysis, reliability requirements, and system-specific certification remain separate engineering concerns. Use controlled assembly processes and verify power sequencing, derating, and thermal margins before deployment.

What is the AMD XCKU11P-1FFVD900I?
The AMD XCKU11P-1FFVD900I is a Kintex UltraScale+ field-programmable gate array with 408 logic cells, 408 I/O, and 53,964,800 bits of on-chip memory. It is supplied in a 900-BBGA FCBGA package with 900 terminals. According to the AMD product and package documentation, the device combines programmable logic, embedded memory, parallel user I/O, and high-speed UltraScale+ resources for industrial digital systems.
What package does the XCKU11P-1FFVD900I use?
The XCKU11P-1FFVD900I uses a 900-BBGA FCBGA package with 900 terminals and a square package shape. AMD identifies the package through the D900 portion of the ordering code. For PCB implementation, use AMD's UltraScale package pinout files and the package information in UG575 rather than relying on a generic BGA land pattern, because ball assignment and power configuration are device-specific.
Where can I download the XCKU11P-1FFVD900I pinout and datasheet?
The official AMD UltraScale package-device pinout page provides downloadable package files in TXT and CSV formats for pin assignment and board-design work. AMD also directs designers to UG575 for package and pinout details. The product's ordering code, 408-I/O configuration, and 900-BBGA package can be confirmed through AMD's product documentation and the public XCKU11P family information.
How many logic cells and I/O does the XCKU11P-1FFVD900I have?
The XCKU11P-1FFVD900I contains 408 logic cells and provides 408 user I/O. Its embedded memory totals 53,964,800 bits. These figures make the device appropriate for designs requiring substantial parallel connectivity, such as acquisition systems, industrial controllers, parallel processing pipelines, and systems that combine multiple external interface buses with programmable logic.
Is the XCKU11P-1FFVD900I an industrial-temperature device?
Yes, the final I suffix identifies the XCKU11P-1FFVD900I as the industrial-temperature ordering option. The -1 code identifies the speed grade, while the remaining package-code characters identify the FFVD900I device and package configuration. Confirm the complete operating-temperature limits and grade qualification in the AMD product documentation before applying the device outside its specified environmental range.
What can replace the XCKU11P-1FFVD900I?
The closest same-package family alternatives are the XCKU11P-1FFVD900E, XCKU11P-L1FFVD900I, and XCKU5P-1FFVD900I, but none should be treated as an automatic drop-in replacement. They differ in temperature grade, speed grade, or logic capacity. A replacement must match the PCB land pattern, power configuration, speed requirement, temperature range, memory resources, high-speed interfaces, and any factory-programmed configuration.
Can the XCKU11P-1FFVD900E replace the XCKU11P-1FFVD900I?
The XCKU11P-1FFVD900E is the same 900-BBGA package family with the same 408 logic cells, but its E temperature-grade suffix differs from the target's I suffix. It is therefore a close board-compatible alternative when the E grade covers the operating environment. Review power, speed, temperature, configuration-memory, and qualification requirements before approving it as a procurement substitute.
When should I choose the XCKU11P-1FFVD900I over the XCKU5P-1FFVD900I?
Choose the XCKU11P-1FFVD900I when the design requires the full 408-cell Kintex UltraScale+ resource set or more connectivity than the XCKU5P variant provides. The XCKU5P-1FFVD900I offers 304 logic cells, 25.5% fewer than the target, while retaining the 900-BBGA package family. Both can serve dense programmable-logic designs, but resource utilization and timing closure must be revalidated.
Is XCKU11P-1FFVD900I suitable for industrial control systems?
The XCKU11P-1FFVD900I is suitable for many industrial control applications because it provides 408 logic cells, 408 I/O, substantial embedded memory, and an industrial-temperature ordering suffix. Its 900-BBGA package supports dense interconnection but requires advanced PCB assembly and careful power delivery. Validate EMC, isolation, thermal conditions, functional safety, and long-term availability at the system level.
What is the difference between -1 and L1 XCKU11P speed grades?
The -1 and L1 designators identify different AMD speed-grade options for the XCKU11P family. The target XCKU11P-1FFVD900I uses the -1 ordering code, while the XCKU11P-L1FFVD900I uses L1. Timing, power, temperature, and qualification requirements determine which grade is appropriate; do not substitute them solely because both use the 900-BBGA package family.
Where can I buy the XCKU11P-1FFVD900I?
Use the Request a Quote form on this page to request current availability, lead time, and a formal quotation for the AMD XCKU11P-1FFVD900I. The request should include the required package code, quantity, target date, and whether the FPGA requires a factory configuration. Programmed or nonstandard configurations should be identified separately from the base device.
What is the price of the XCKU11P-1FFVD900I?
The current commercial price and quantity schedule for the XCKU11P-1FFVD900I should be obtained through the Request a Quote form on this page. Because availability and lead time can change with market conditions and configuration requirements, submit the exact orderable MPN and required quantity. The quote request can also capture factory-programmed configuration needs.
Is the XCKU11P-1FFVD900I in stock?
Current inventory status should be confirmed through the Request a Quote form on this page. Availability for a large 900-FCBGA FPGA can depend on quantity, date code, configuration state, and manufacturing allocation. State the required quantity and target delivery date in the request, and identify whether an industrial-temperature grade or a programmed configuration is mandatory.
How should the 900-BBGA XCKU11P-1FFVD900I be laid out on a PCB?
Use AMD's published UltraScale package pinout files for exact ball assignments and follow the manufacturer recommendations for layer count, escape routing, power planes, decoupling, and high-speed transceiver connections. A 900-BBGA device cannot be routed safely from generic package drawings alone. After schematic capture, run AMD Vivado implementation and board-level signal-integrity and power-integrity checks on the actual PCB stack-up.
What are the key specifications of the XCKU11P-1FFVD900I that engineers should know?
The principal XCKU11P-1FFVD900I specifications are 408 logic cells, 408 I/O, 53,964,800 bits of on-chip memory, a 900-BBGA FCBGA package, and an industrial-temperature suffix. The -1 code identifies the speed grade. AMD's product and package documentation should be used for complete logic-resource, memory, transceiver, power, timing, and environmental specifications before final design release.
Is there a cross-brand drop-in replacement for the XCKU11P-1FFVD900I?
No verified cross-brand drop-in replacement is established for the XCKU11P-1FFVD900I. Its 900-BBGA land pattern is only the first compatibility requirement; pin assignment, configuration method, power architecture, high-speed interfaces, logic resources, and environmental qualification must also match. Cross-brand alternatives should be treated as redesign candidates until AMD-compatible pin data and complete timing and resource comparisons are available.

के लिए इंजीनियरिंग संदर्भ डेटा XCKU11P-1FFVD900I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AMD XCKU11P-1FFVD900I when the design requires the full 408-cell Kintex UltraScale+ configuration, 408 user I/O, substantial embedded memory, and an industrial-temperature option in a 900-BBGA package. The XCKU11P-1FFVD900E is the closest family option when its E temperature grade better matches the installation environment; confirm all operating limits before substitution. Use the XCKU11P-L1FFVD900I only when L1 timing and power characteristics satisfy the design and procurement constraints. Select the XCKU5P-1FFVD900I only after confirming that 304 logic cells and 41,984,000 memory bits are sufficient and that utilization and timing can be closed. Because no verified cross-brand pin-compatible alternative is established, treat other FPGA families as redesign candidates rather than drop-in parts. In every case, validate the exact configuration suffix, package pinout, power rails, Vivado timing, thermal performance, and PCB assembly plan.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XCKU11P-1FFVD900E XCKU11P-L1FFVD900I XCKU5P-1FFVD900I
Brand AMD AMD AMD AMD
Package 900-BBGA FCBGA 900-BBGA FCBGA - same package family 900-BBGA FCBGA - same package family 900-BBGA FCBGA - same package family
Device Family Kintex UltraScale+ Kintex UltraScale+ Kintex UltraScale+ Kintex UltraScale+
Logic Cells 408 cells 408 cells 408 cells 304 cells
Temperature Grade Industrial E grade Industrial Industrial
Speed Grade -1 -1 L1 -1
Terminal Count 900 terminals 900 terminals 900 terminals 900 terminals
Special Ordering Suffix I industrial-temperature suffix E temperature-grade suffix I industrial-temperature suffix I industrial-temperature suffix

मुख्य विशेषताएँ

  • Higher logic capacity within the same 900-BBGA package family (बनामXCKU5P-1FFVD900I)
  • Higher embedded-memory capacity than the XCKU5P alternative (बनामXCKU5P-1FFVD900I)
  • Industrial-temperature ordering option with the same 408-cell configuration (बनामXCKU11P-1FFVD900E)
  • Direct -1 speed-grade selection (बनामXCKU11P-L1FFVD900I)

डिज़ाइन नोट्स

Do not create a 900-BBGA land pattern from a generic package drawing. Start with AMD's UltraScale package-device pinout files and validate every ball assignment against the selected device, speed code, temperature grade, and any configuration-memory option. Use the manufacturer-recommended layer count and escape strategy, and run Vivado implementation against the actual PCB constraints before releasing fabrication data.

Treat the XCKU11P-1FFVD900I as a multi-rail, high-pin-count FPGA and implement separate power, ground, and auxiliary-supply connections exactly as specified by AMD. Place local high-frequency decoupling close to the device pins and preserve the recommended plane connectivity. Validate voltage sequencing, current transients, and power-supply tolerance under worst-case logic utilization and I/O activity rather than average operating conditions.

Route all UltraScale+ transceiver channels on the layers and with the reference-plane transitions specified in the design methodology. Keep high-speed differential pairs controlled, maintain continuous return paths, and avoid stubs or unnecessary layer changes. Apply the same discipline to clock, memory, and parallel data interfaces because a clean package assignment does not compensate for poor signal-integrity implementation.

Model the 900-BBGA assembly with the actual PCB stack-up, copper distribution, airflow, and adjacent heat sources. Check junction temperature at maximum processor activity and the highest supported I/O toggle rate. Use spread copper and vias according to AMD's package guidance, but do not assume exposed-ball access alone guarantees adequate cooling. Confirm production-board thermal performance with instrumentation or a validated model.

Avoid treating all XCKU11P ordering codes as interchangeable. The -1 and L1 speed designations, I and E temperature suffixes, and FFVD900 package code can represent different operating requirements even when the PCB land pattern is shared. A factory-programmed configuration also changes the complete orderable MPN. Review timing, resource utilization, thermal ratings, and configuration requirements before approving any substitution.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The exact XCKU11P-1FFVD900I ordering code has no directly stated compliance status. Compliance claims for related XCKU11P ordering codes should not be transferred to the target without manufacturer confirmation.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

xcku11p 2ffva1156i xcku11p 1ffva1156e xcku11p 2ffvd900i xcku11p datasheet XCKU11P-1FFVD900I pinout XCKU11P-1FFVD900I datasheet pdf XCKU11P-1FFVD900I equivalent XCKU11P-1FFVD900I replacement XCKU11P-1FFVD900I cross reference XCKU11P-1FFVD900I vs XCKU5P-1FFVD900I XCKU11P-1FFVD900I footprint XCKU11P-1FFVD900I application circuit XCKU11P-1FFVD900I price XCKU11P-1FFVD900I stock

संबंधित कंपोनेंट्स और शब्द

AMD Xilinx XCKU11P-1FFVD900I XCKU11P-1FFVD900E XCKU11P-L1FFVD900I XCKU5P-1FFVD900I Kintex UltraScale+ field-programmable gate array FPGA programmable logic device configurable SoC semiconductor 900-BBGA FCBGA BGA package family surface-mount package logic cell block RAM user I/O high-speed transceiver industrial-grade semiconductor Vivado UG575 AMD UltraScale package pinout files
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें