XCKU11P-1FFVD900I - 408-I/O Kintex UltraScale+ FPGA | AMD
Teilenummer: XCKU11P-1FFVD900I ✓ AktivXCKU11P-1FFVD900I Übersicht
A field-programmable gate array is a semiconductor whose logic, interconnect, memory, and I/O resources can be configured after manufacture. The FPGA hierarchy progresses from a programmable logic device to an FPGA, then to a configurable SoC platform when processors, programmable logic, memory, and high-speed I/O are integrated. The XCKU11P-1FFVD900I belongs to AMD's Kintex UltraScale+ family, combining parallel programmable logic with high-speed serial connectivity and substantial block RAM.
The device provides 408 logic cells and 53,964,800 bits of on-chip memory. Its 408 I/O supports connections to external processors, memory, sensors, network transceivers, and industrial peripherals. The 900-BBGA FCBGA package concentrates a large number of connections in a compact square land pattern, reducing package size while increasing the complexity of escape routing and demanding careful PCB-layer planning.
The -1 ordering code denotes the device speed grade, while the final I suffix identifies the industrial temperature option. A factory-programmed configuration is normally identified by an additional configuration-memory suffix, so engineers should distinguish the base FPGA orderable part from a specific programmed configuration when reviewing bills of materials or replacement requirements.
Typical uses include industrial control, test and measurement, high-throughput digital signal processing, embedded vision, communications infrastructure, and data-acquisition systems. The 408-I/O resource count is particularly useful for designs combining multiple bus interfaces, parallel ADC or DAC connections, and high-speed serial links. The 900-ball package also makes thermal design, assembly, inspection, and board redesign more demanding than it would be for a leaded device.
PCB implementation should use manufacturer-published escape routing, power-decoupling, and ball-assignment data. Validate every high-speed lane against the UltraScale+ transceiver constraints, preserve the recommended power and ground-plane topology, and confirm the assembled board's thermal performance before production. Use AMD's package pinout files and UG575 when assigning signals and validating the physical design.
This product record combines the verified device identity, 900-FCBGA package information, public documentation links, and engineering-oriented application guidance. It also distinguishes the target ordering code from same-family alternatives so procurement and engineering teams can evaluate speed-grade, temperature-grade, and logic-capacity tradeoffs without confusing a functional family member with a true drop-in replacement.
Drop-in-Alternativen für XCKU11P-1FFVD900I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XCKU11P-1FFVD900I (gleiche Bauform und Footprint) – abweichend in Device Type, Logic Cells, Mounting Type, Package Type, Programmable Logic.
XCKU11P-1FFVD900E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XCKU11P-L1FFVD900I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XCKU5P-1FFVD900I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XCKU11P-1FFVD900I Grenzwerte & elektrische Eigenschaften
| Device Type | Kintex UltraScale+ field-programmable gate array (FPGA) |
| Logic Cells | 408 cells |
| I/O Count | 408 I/O |
| On-Chip Memory | 53,964,800 bits |
| Gehäuse | 900-BBGA FCBGA |
| Terminal Count | 900 terminals |
| Package Shape | Square |
| Terminal Form | Ball |
| Temperature Grade | Industrial |
| Speed Grade | -1 |
| Montageart | Surface-mount BGA |
| Programmable Logic | 408 cells |
| Block RAM | 53,964,800 bits |
| User I/O | 408 I/O |
| Series | Kintex UltraScale+ |
XCKU11P-1FFVD900I square Pinbelegungsleitfaden
Pinbelegung für XCKU11P-1FFVD900I (square-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XCKU11P-1FFVD900I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XCKU11P-1FFVD900I ist geeignet für 6 Anwendungs: Industrial Control and Automation, Data Acquisition Systems, Test and Measurement Equipment, High-Speed Communications Equipment, Embedded Vision and Image Processing, Aerospace and Defense Processing.
Industrial Control and Automation
The AMD XCKU11P-1FFVD900I fits industrial controllers that combine multiple machine interfaces with deterministic programmable logic. Its 408 logic cells provide room for parallel control pipelines, while 408 I/O and 53,964,800 bits of embedded memory support communication bridges, timing functions, and local data buffering. The industrial-temperature I suffix suits controlled factory environments. Place the 900-BBGA device on a multilayer PCB with continuous power planes, short decoupling connections, and isolated high-speed routes. Validate timing against the selected -1 speed grade and confirm thermal performance under worst-case switching activity.
Empfohlen
Data Acquisition Systems
The XCKU11P-1FFVD900I can coordinate parallel data-acquisition pipelines requiring 408 user I/O and substantial internal storage. Logic cells can implement triggering, channel sequencing, digital filtering, and data-format conversion, while 53,964,800 bits of memory can buffer samples before DMA transfer. The 408-I/O count provides connectivity to multiple converters and interface devices without requiring an external fabric. Keep analog and digital return paths separated in the stack-up, and use AMD's package files to route acquisition inputs and high-speed interfaces correctly. Confirm converter timing, channel count, and bandwidth during architecture reviews.
Empfohlen
Test and Measurement Equipment
The AMD XCKU11P-1FFVD900I is suitable for modular test and measurement equipment where parallel instruments, pattern generation, and acquisition must be coordinated by programmable logic. The 408-I/O resource set supports digital channels, triggers, and instrument control, while the 408 logic cells can execute concurrent control and data-processing functions. The 900-BBGA package supports dense routing but requires disciplined high-speed layout, adequate power delivery, and assembly process control. Use Vivado timing analysis for every implemented interface and verify that the industrial-grade component remains within its temperature limits during long-duration measurements.
Empfohlen
High-Speed Communications Equipment
The XCKU11P-1FFVD900I can support communications infrastructure requiring programmable packet processing, parallel interfaces, and high-speed serial connectivity. Its 408 logic cells and 53,964,800 bits of on-chip memory are useful for framing, buffering, and protocol functions, while 408 I/O provide broad system connectivity. UltraScale+ transceiver resources and package-specific constraints must be evaluated against the intended link rate and lane count. Route high-speed differential pairs according to AMD's UltraScale+ guidelines, maintain continuous reference planes, and validate channel loss, skew, and return loss with the actual PCB stack-up.
Empfohlen
Embedded Vision and Image Processing
The AMD XCKU11P-1FFVD900I can support embedded vision front ends that combine pixel transport, feature extraction, and control logic. The 408 user I/O accommodate camera interfaces and parallel sensors, while the embedded memory provides local line buffers or feature storage. Its 408 logic cells allow substantial parallel datapaths when a dedicated processor is not required for every operation. High-speed sensor clocks and links must be routed with continuous reference planes and matched length or equalization according to the selected interface standard. Validate the complete image pipeline in Vivado and perform thermal testing at the highest expected frame rate.
Empfohlen
Aerospace and Defense Processing
The XCKU11P-1FFVD900I can serve as a programmable processing element in aerospace, defense, and rugged embedded systems when its documented electrical and environmental ratings match the mission. The 408 logic cells support real-time datapaths, 408 I/O connect sensors and actuators, and 53,964,800 bits of memory support deterministic buffering. The I suffix identifies the industrial option, not automatic aerospace qualification. Program-level evidence, radiation analysis, reliability requirements, and system-specific certification remain separate engineering concerns. Use controlled assembly processes and verify power sequencing, derating, and thermal margins before deployment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XCKU11P-1FFVD900I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XCKU11P-1FFVD900E | XCKU11P-L1FFVD900I | XCKU5P-1FFVD900I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 900-BBGA FCBGA | 900-BBGA FCBGA - same package family | 900-BBGA FCBGA - same package family | 900-BBGA FCBGA - same package family |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Logic Cells | 408 cells | 408 cells | 408 cells | 304 cells |
| Temperature Grade | Industrial | E grade | Industrial | Industrial |
| Speed Grade | -1 | -1 | L1 | -1 |
| Terminal Count | 900 terminals | 900 terminals | 900 terminals | 900 terminals |
| Special Ordering Suffix | I industrial-temperature suffix | E temperature-grade suffix | I industrial-temperature suffix | I industrial-temperature suffix |
Wichtigste Unterscheidungsmerkmale
- Higher logic capacity within the same 900-BBGA package family (vs. XCKU5P-1FFVD900I)
- Higher embedded-memory capacity than the XCKU5P alternative (vs. XCKU5P-1FFVD900I)
- Industrial-temperature ordering option with the same 408-cell configuration (vs. XCKU11P-1FFVD900E)
- Direct -1 speed-grade selection (vs. XCKU11P-L1FFVD900I)
Designhinweise
Do not create a 900-BBGA land pattern from a generic package drawing. Start with AMD's UltraScale package-device pinout files and validate every ball assignment against the selected device, speed code, temperature grade, and any configuration-memory option. Use the manufacturer-recommended layer count and escape strategy, and run Vivado implementation against the actual PCB constraints before releasing fabrication data.
Treat the XCKU11P-1FFVD900I as a multi-rail, high-pin-count FPGA and implement separate power, ground, and auxiliary-supply connections exactly as specified by AMD. Place local high-frequency decoupling close to the device pins and preserve the recommended plane connectivity. Validate voltage sequencing, current transients, and power-supply tolerance under worst-case logic utilization and I/O activity rather than average operating conditions.
Route all UltraScale+ transceiver channels on the layers and with the reference-plane transitions specified in the design methodology. Keep high-speed differential pairs controlled, maintain continuous return paths, and avoid stubs or unnecessary layer changes. Apply the same discipline to clock, memory, and parallel data interfaces because a clean package assignment does not compensate for poor signal-integrity implementation.
Model the 900-BBGA assembly with the actual PCB stack-up, copper distribution, airflow, and adjacent heat sources. Check junction temperature at maximum processor activity and the highest supported I/O toggle rate. Use spread copper and vias according to AMD's package guidance, but do not assume exposed-ball access alone guarantees adequate cooling. Confirm production-board thermal performance with instrumentation or a validated model.
Avoid treating all XCKU11P ordering codes as interchangeable. The -1 and L1 speed designations, I and E temperature suffixes, and FFVD900 package code can represent different operating requirements even when the PCB land pattern is shared. A factory-programmed configuration also changes the complete orderable MPN. Review timing, resource utilization, thermal ratings, and configuration requirements before approving any substitution.
Compliance-Informationen
The exact XCKU11P-1FFVD900I ordering code has no directly stated compliance status. Compliance claims for related XCKU11P ordering codes should not be transferred to the target without manufacturer confirmation.