XMC4104F64K128BAXQMA1 - 80MHz Cortex-M4 128KB MCU | Infineon
MPN: XMC4104F64K128BAXQMA1 ✓ सक्रियXMC4104F64K128BAXQMA1 अवलोकन
The XMC4104 belongs to the XMC4000 family of 32-bit microcontrollers. A microcontroller integrates a processor core, flash program memory, SRAM, peripheral interfaces, clocking, interrupt control, and debug support into one package. This makes the XMC4104 suitable for applications that require deterministic real-time behavior, moderate embedded storage, and a compact industrial control footprint rather than a separate processor, memory, and interface devices.
Key features include an Arm Cortex-M4 processor operating at 80 MHz, 128 KB flash, and 20 KB SRAM. The product page identifies the family as an industrial microcontroller, while distributor records identify the package as PG-LQFP-64-19 and the memory organization as 128K x 8. The 3.3 V operating voltage listed in distributor documentation provides the primary supply reference for board-level design.
The Arm Cortex-M4 architecture supports efficient control-oriented instruction execution and is commonly used for motor control, industrial automation, communications, embedded instrumentation, and real-time peripherals. The 128 KB flash region is suitable for application firmware, while the 20 KB SRAM supports working memory, stack space, buffers, and interrupt or communication data structures. Exact peripheral assignments, clock limits, temperature limits, and electrical timing values should be confirmed against the manufacturer datasheet before layout or firmware release.
Typical XMC4104 designs include industrial controllers, sensor and actuator interfaces, communication gateways, embedded automation equipment, and compact motor-control systems. The 64-pin package provides more external connection options than smaller microcontroller packages, allowing designers to assign peripheral signals, debug interfaces, communications, timers, and analog functions according to the device pin description.
For PCB design, preserve the exposed-pad and thermal requirements defined by the manufacturer package drawing, route sensitive analog and communication interfaces away from switching nodes, and provide decoupling close to the supply pins. Firmware development should use the Arm Cortex-M4 programming and debug workflow supported by the selected development toolchain.
This product page combines manufacturer identification, package information, memory and clock specifications, practical application guidance, and structured sourcing information to accelerate component selection and design review.
के लिए ड्रॉप-इन विकल्प XMC4104F64K128BAXQMA1 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XMC4104F64K128BAXQMA1 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Architecture, Flash Memory, Package, Supply Voltage.
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंXMC4104F64K128BAXQMA1 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| Flash Memory Organization | 128K x 8 |
| SRAM | 20 KB |
| Architecture | 32-bit |
| सप्लाई वोल्टेज | 3.3 V |
| पैकेज | PG-LQFP-64-19 |
| Package Type | 64-lead LQFP |
| माउंटिंग प्रकार | Surface mount |
| Series | XMC4000 |
| Application Classification | Industrial |
XMC4104F64K128BAXQMA1 64-lead lqfp पिन कॉन्फ़िगरेशन गाइड
XMC4104F64K128BAXQMA1 (64-lead lqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XMC4104F64K128BAXQMA1.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XMC4104F64K128BAXQMA1 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Motor Control and Actuator Systems, Sensor and Measurement Systems, Communication Gateway, Embedded Data Acquisition, Embedded Communication and Interface Hub.
Industrial Automation Controller
The XMC4104F64K128BAXQMA1 fits compact industrial automation controllers that coordinate sensors, actuators, and communications in real time. Its 80 MHz Arm Cortex-M4 core provides useful control-loop performance, while 128 KB flash stores application code and 20 KB SRAM supports buffers, state machines, and communication workspaces. The 64-lead package offers a practical number of external connections for digital I/O, debug, and peripheral assignments. Designers should use the manufacturer pin description to map interfaces and confirm that the selected peripheral functions are available on the exact package.
अनुशंसित
Motor Control and Actuator Systems
The XMC4104F64K128BAXQMA1 can serve as the supervisory controller in motor-control and actuator systems where deterministic control code, event handling, and communication coexist. Its 80 MHz Cortex-M4 core is suitable for executing control and supervisory tasks, and the 128 KB flash provides room for application firmware and configuration data. The 20 KB SRAM supports command queues and timing variables. Exact timer channels, analog inputs, and pin multiplexing should be checked in the manufacturer datasheet before assigning feedback, drive, and protection signals.
अनुशंसित
Sensor and Measurement Systems
The XMC4104F64K128BAXQMA1 is suitable for embedded measurement systems that collect sensor information, apply filtering, and present results through a local or remote interface. Its 128 KB flash can hold calibration tables, control routines, and protocol handlers, while 20 KB SRAM supports acquisition buffers and working variables. The 64-pin package provides a useful balance between external connectivity and board area. Engineers should verify the required ADC, timer, serial-interface, and precision reference functions against the exact device pin table.
अनुशंसित
Communication Gateway
The XMC4104F64K128BAXQMA1 can support industrial communication gateways that translate between local equipment and an upstream network. Its 80 MHz Cortex-M4 core is appropriate for protocol processing, and the 128 KB flash and 20 KB SRAM provide capacity for firmware, message buffers, and stack operations. The 64-lead package allows use of multiple serial interfaces, control signals, and debug access where the selected pin assignments permit. For new designs, confirm the required CAN, Ethernet, USB, or other interface requirements directly from the manufacturer documentation.
अनुशंसित
Embedded Data Acquisition
The XMC4104F64K128BAXQMA1 is appropriate for embedded data-acquisition equipment that gathers digital and analog process information and performs local calculations. The 128 KB flash can store application firmware, lookup tables, and logging control code, while 20 KB SRAM supports sample buffers and intermediate calculations. Its 80 MHz core leaves processing headroom for filtering, diagnostics, and data formatting. Confirm ADC performance, timer resources, and exposed-pin assignments in the exact datasheet before final sensor selection and schematic capture.
अनुशंसित
Embedded Communication and Interface Hub
The XMC4104F64K128BAXQMA1 can act as a local interface hub for industrial peripherals, diagnostic equipment, or programmable control modules. Its Arm Cortex-M4 architecture supports interrupt-driven communication, protocol conversion, and supervisory state management, while the 64-lead package offers flexible pin assignment for several external interfaces. The 128 KB flash and 20 KB SRAM are sufficient for many embedded applications when firmware size remains moderate. Designers should map UART, SPI, I2C, CAN, and debug functions only after confirming availability and electrical limits in the manufacturer pin table.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XMC4104F64K128BAXQMA1 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Package | PG-LQFP-64-19 |
| Brand | Infineon Technologies |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| SRAM | 20 KB |
| Supply Voltage | 3.3 V |
| Architecture | 32-bit |
मुख्य विशेषताएँ
- Industrial Cortex-M4 positioning (बनामGeneral-purpose MCU alternatives)
- Integrated memory configuration (बनामExternal-memory-oriented MCU designs)
- Exact package identification (बनामXMC4104F64K128ABXQSA1)
डिज़ाइन नोट्स
Create the PCB footprint from the Infineon PG-LQFP-64-19 package drawing, including the exposed-pad geometry and paste pattern. Place all decoupling capacitors close to their associated supply and ground pins, and use the shortest practical ground return paths. Treat the exposed pad as a thermal and electrical feature only as directed by the manufacturer package documentation.
Review the pin-description table before assigning communication, debug, timer, and analog functions. Route clock and debug signals away from switching power nodes and noisy digital returns, while separating sensitive analog inputs from high-current outputs. If an exposed pad is used for heat spreading, connect it according to the datasheet and preserve adequate copper area for thermal performance.
Do not substitute a microcontroller based only on flash size or core frequency. Verify pin numbering, package geometry, supply pins, debug interface, clock requirements, peripheral availability, and exposed-pad requirements. The XMC4104F64K128ABXQSA1 is listed as a TQFP-64 variant, so it must not be treated as a direct PG-LQFP-64-19 replacement without a complete footprint and electrical review.
अनुपालन जानकारी
The available manufacturer product-page excerpt identifies the XMC4104-F64K128-BA as an industrial Arm Cortex-M4 microcontroller but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.