XMC4104F64K128BAXQMA1 - 80MHz Cortex-M4 128KB MCU | Infineon
MPN: XMC4104F64K128BAXQMA1 ✓ Hoạt độngXMC4104F64K128BAXQMA1 Tóm tắt
The XMC4104 belongs to the XMC4000 family of 32-bit microcontrollers. A microcontroller integrates a processor core, flash program memory, SRAM, peripheral interfaces, clocking, interrupt control, and debug support into one package. This makes the XMC4104 suitable for applications that require deterministic real-time behavior, moderate embedded storage, and a compact industrial control footprint rather than a separate processor, memory, and interface devices.
Key features include an Arm Cortex-M4 processor operating at 80 MHz, 128 KB flash, and 20 KB SRAM. The product page identifies the family as an industrial microcontroller, while distributor records identify the package as PG-LQFP-64-19 and the memory organization as 128K x 8. The 3.3 V operating voltage listed in distributor documentation provides the primary supply reference for board-level design.
The Arm Cortex-M4 architecture supports efficient control-oriented instruction execution and is commonly used for motor control, industrial automation, communications, embedded instrumentation, and real-time peripherals. The 128 KB flash region is suitable for application firmware, while the 20 KB SRAM supports working memory, stack space, buffers, and interrupt or communication data structures. Exact peripheral assignments, clock limits, temperature limits, and electrical timing values should be confirmed against the manufacturer datasheet before layout or firmware release.
Typical XMC4104 designs include industrial controllers, sensor and actuator interfaces, communication gateways, embedded automation equipment, and compact motor-control systems. The 64-pin package provides more external connection options than smaller microcontroller packages, allowing designers to assign peripheral signals, debug interfaces, communications, timers, and analog functions according to the device pin description.
For PCB design, preserve the exposed-pad and thermal requirements defined by the manufacturer package drawing, route sensitive analog and communication interfaces away from switching nodes, and provide decoupling close to the supply pins. Firmware development should use the Arm Cortex-M4 programming and debug workflow supported by the selected development toolchain.
This product page combines manufacturer identification, package information, memory and clock specifications, practical application guidance, and structured sourcing information to accelerate component selection and design review.
Bộ thay thế dễ dàng lắp đặt cho XMC4104F64K128BAXQMA1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XMC4104F64K128BAXQMA1 (cùng hình factor và footprint) — khác nhau ở Architecture, Flash Memory, Package, Supply Voltage.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếXMC4104F64K128BAXQMA1 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| Flash Memory Organization | 128K x 8 |
| SRAM | 20 KB |
| Architecture | 32-bit |
| Điện áp cung cấp | 3.3 V |
| Hộp | PG-LQFP-64-19 |
| Package Type | 64-lead LQFP |
| Kiểu lắp đặt | Surface mount |
| Series | XMC4000 |
| Application Classification | Industrial |
Hướng dẫn cấu hình chân XMC4104F64K128BAXQMA1 64-lead lqfp
Cấu hình chân cho XMC4104F64K128BAXQMA1 (64-lead lqfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XMC4104F64K128BAXQMA1.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XMC4104F64K128BAXQMA1 phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Motor Control and Actuator Systems, Sensor and Measurement Systems, Communication Gateway, Embedded Data Acquisition, Embedded Communication and Interface Hub.
Industrial Automation Controller
The XMC4104F64K128BAXQMA1 fits compact industrial automation controllers that coordinate sensors, actuators, and communications in real time. Its 80 MHz Arm Cortex-M4 core provides useful control-loop performance, while 128 KB flash stores application code and 20 KB SRAM supports buffers, state machines, and communication workspaces. The 64-lead package offers a practical number of external connections for digital I/O, debug, and peripheral assignments. Designers should use the manufacturer pin description to map interfaces and confirm that the selected peripheral functions are available on the exact package.
Được đề xuất
Motor Control and Actuator Systems
The XMC4104F64K128BAXQMA1 can serve as the supervisory controller in motor-control and actuator systems where deterministic control code, event handling, and communication coexist. Its 80 MHz Cortex-M4 core is suitable for executing control and supervisory tasks, and the 128 KB flash provides room for application firmware and configuration data. The 20 KB SRAM supports command queues and timing variables. Exact timer channels, analog inputs, and pin multiplexing should be checked in the manufacturer datasheet before assigning feedback, drive, and protection signals.
Được đề xuất
Sensor and Measurement Systems
The XMC4104F64K128BAXQMA1 is suitable for embedded measurement systems that collect sensor information, apply filtering, and present results through a local or remote interface. Its 128 KB flash can hold calibration tables, control routines, and protocol handlers, while 20 KB SRAM supports acquisition buffers and working variables. The 64-pin package provides a useful balance between external connectivity and board area. Engineers should verify the required ADC, timer, serial-interface, and precision reference functions against the exact device pin table.
Được đề xuất
Communication Gateway
The XMC4104F64K128BAXQMA1 can support industrial communication gateways that translate between local equipment and an upstream network. Its 80 MHz Cortex-M4 core is appropriate for protocol processing, and the 128 KB flash and 20 KB SRAM provide capacity for firmware, message buffers, and stack operations. The 64-lead package allows use of multiple serial interfaces, control signals, and debug access where the selected pin assignments permit. For new designs, confirm the required CAN, Ethernet, USB, or other interface requirements directly from the manufacturer documentation.
Được đề xuất
Embedded Data Acquisition
The XMC4104F64K128BAXQMA1 is appropriate for embedded data-acquisition equipment that gathers digital and analog process information and performs local calculations. The 128 KB flash can store application firmware, lookup tables, and logging control code, while 20 KB SRAM supports sample buffers and intermediate calculations. Its 80 MHz core leaves processing headroom for filtering, diagnostics, and data formatting. Confirm ADC performance, timer resources, and exposed-pin assignments in the exact datasheet before final sensor selection and schematic capture.
Được đề xuất
Embedded Communication and Interface Hub
The XMC4104F64K128BAXQMA1 can act as a local interface hub for industrial peripherals, diagnostic equipment, or programmable control modules. Its Arm Cortex-M4 architecture supports interrupt-driven communication, protocol conversion, and supervisory state management, while the 64-lead package offers flexible pin assignment for several external interfaces. The 128 KB flash and 20 KB SRAM are sufficient for many embedded applications when firmware size remains moderate. Designers should map UART, SPI, I2C, CAN, and debug functions only after confirming availability and electrical limits in the manufacturer pin table.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XMC4104F64K128BAXQMA1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | PG-LQFP-64-19 |
| Brand | Infineon Technologies |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| SRAM | 20 KB |
| Supply Voltage | 3.3 V |
| Architecture | 32-bit |
Bảo phân biệt quan trọng
- Industrial Cortex-M4 positioning (vsGeneral-purpose MCU alternatives)
- Integrated memory configuration (vsExternal-memory-oriented MCU designs)
- Exact package identification (vsXMC4104F64K128ABXQSA1)
Ghi chú thiết kế
Create the PCB footprint from the Infineon PG-LQFP-64-19 package drawing, including the exposed-pad geometry and paste pattern. Place all decoupling capacitors close to their associated supply and ground pins, and use the shortest practical ground return paths. Treat the exposed pad as a thermal and electrical feature only as directed by the manufacturer package documentation.
Review the pin-description table before assigning communication, debug, timer, and analog functions. Route clock and debug signals away from switching power nodes and noisy digital returns, while separating sensitive analog inputs from high-current outputs. If an exposed pad is used for heat spreading, connect it according to the datasheet and preserve adequate copper area for thermal performance.
Do not substitute a microcontroller based only on flash size or core frequency. Verify pin numbering, package geometry, supply pins, debug interface, clock requirements, peripheral availability, and exposed-pad requirements. The XMC4104F64K128ABXQSA1 is listed as a TQFP-64 variant, so it must not be treated as a direct PG-LQFP-64-19 replacement without a complete footprint and electrical review.
Thông tin tuân thủ
The available manufacturer product-page excerpt identifies the XMC4104-F64K128-BA as an industrial Arm Cortex-M4 microcontroller but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.