Z86E3016SEG - 8-Bit 16MHz OTP Microcontroller | Zilog
MPN: Z86E3016SEG ✓ सक्रियZ86E3016SEG अवलोकन
An 8-bit microcontroller is a compact embedded-control IC that integrates a processor core, program memory, data memory, and digital I/O into one package. In the product hierarchy, the Z86E3016SEG belongs to the Z8 family of 8-bit microcontrollers and combines a dedicated CPU core with OTP program storage. Its 16 MHz operating speed supports straightforward control logic, while 24 I/O lines provide connections to sensors, switches, indicators, actuators, and other digital peripherals.
Key features include 4 KB of OTP ROM, 236 bytes of RAM, 24 I/O lines, and a 16 MHz maximum clock. Programmable OTP options include an RC oscillator, EPROM protection, auto-latch disable, and programmable configurations. Because program memory is one-time programmable, firmware is permanently programmed during manufacturing or provisioning rather than rewritten during normal use.
The Z86E3016SEG uses the Z8 8-bit architecture and is designed for dedicated embedded-control tasks rather than high-compute workloads. Its 236-byte RAM supports working variables and short-lived data structures, while the 4 KB ROM provides 4096 bytes for fixed application instructions. The 24 digital I/O lines offer substantial interface capacity for compact controllers that do not require external memory or a high-speed communications interface.
Typical uses include industrial control panels, appliance controllers, simple motor-control interfaces, keypads, LED status systems, and compact embedded instruments. These applications benefit from the combination of a 16 MHz processor, 24 I/O lines, and a limited, predictable memory footprint. Designers should account for one-time programming when creating production firmware and verify the final code image before programming any sample or production device.
For new layouts, route the 24 I/O signals away from sensitive analog or clock circuitry and follow the pin-description table in the manufacturer datasheet when assigning PCB functions. Confirm oscillator, reset, programming, and supply connections against the exact package drawing. Because the OTP program is not reusable, production planning should include firmware validation, programming yield controls, and traceability for each programmed device.
के लिए ड्रॉप-इन विकल्प Z86E3016SEG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं Z86E3016SEG (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type, Program Memory Size, Program Memory Type, Supply Voltage.
Z86E3016SSG
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →Z86E3016SEC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →Z86E3016SEG Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit Z8 microcontroller |
| Maximum Clock Speed | 16 MHz |
| Program Memory | 4 KB OTP ROM |
| Program Memory Organization | 4K x 8 bits |
| RAM | 236 bytes |
| I/O Lines | 24 lines |
| सप्लाई वोल्टेज | 4.5 V to 5.5 V |
| Operating Range | Industrial |
| पैकेज | 28-pin SOIC |
| पिन काउंट | 28 pins |
| माउंटिंग प्रकार | Surface mount |
| Programmable OTP Option | RC oscillator |
| Programmable OTP Option | EPROM protection |
| Programmable OTP Option | Auto-latch disable |
| Lifecycle Stage | Active |
| RoHS स्थिति | unknown |
| REACH Status | unknown |
| Automotive Qualification | Not applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
Z86E3016SEG 28-pin soic पिन कॉन्फ़िगरेशन गाइड
Z86E3016SEG (28-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: Z86E3016SEG.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
Z86E3016SEG के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Panels, Appliance and Equipment Controllers, LED Status and Signage Control, Keypad and Access-Control Interfaces, Simple Motor and Relay Interfaces, Compact Embedded Instruments.
Industrial Control Panels
The Z86E3016SEG suits compact industrial control panels where a controller must read switches, drive indicators, and coordinate discrete outputs. Its 24 I/O lines provide substantial peripheral capacity in a single 28-pin SOIC, while the 16 MHz Z8 processor handles fixed control sequences and debounce or state-management logic. The 4 KB OTP ROM is suitable for production firmware whose operating sequence is finalized before programming. Its industrial operating classification also makes it appropriate for equipment environments requiring a wider temperature grade than a consumer controller. Design the firmware around the 236-byte RAM limit and place the MCU close enough to connector circuitry to minimize long digital traces and susceptibility to industrial electrical noise.
अनुशंसित
Appliance and Equipment Controllers
The Z86E3016SEG can manage appliance and equipment control functions that combine multiple digital inputs with relays, indicators, and user interfaces. Its 24 I/O lines allow the controller to supervise buttons, mode switches, interlocks, and discrete outputs without requiring a separate I/O expander for moderate pin counts. The 16 MHz clock supports responsive sequencing, and the 4 KB OTP ROM provides space for a fixed control program that cannot be modified after delivery. The 4.5 V to 5.5 V operating range suits 5 V equipment architectures. Engineers should validate every connected actuator against the MCU pin limits and include appropriate interface components for inductive loads rather than driving them directly from an I/O pin.
अनुशंसित
LED Status and Signage Control
The Z86E3016SEG is appropriate for simple LED status boards, annunciators, and process-indicator systems where multiple discrete outputs require coordinated timing. Its 24 I/O lines can be allocated among LEDs, acknowledgment inputs, and operating-mode controls, while the 16 MHz Z8 core executes blink patterns, fault flags, and debounce logic. The 4 KB OTP ROM is sufficient for a production appliance when the final program is known, and the 236-byte RAM accommodates display state and temporary counters. Use current-limiting resistors or an appropriate driver for LED strings and keep high-current loads away from MCU supply pins. Confirm the board's ground return and separation between switching loads and sensitive input circuitry.
अनुशंसित
Keypad and Access-Control Interfaces
The Z86E3016SEG can serve as the controller for compact keypads, credential readers, and access-control interfaces built around discrete digital signals. It provides 24 I/O lines for matrix scanning, status LEDs, lock control, and request inputs, while its 16 MHz processor supports real-time scanning and debounce routines. The 4 KB OTP ROM is appropriate for fixed firmware after programming, and the 236-byte RAM can hold keypad state, authentication status, and event variables. Security-sensitive designs should protect the OTP programming path and avoid retaining sensitive credentials in ordinary RAM. Validate electrical levels for the reader and lock-driver interfaces, and use transistor or FET drive stages rather than powering solenoids directly from the microcontroller.
अनुशंसित
Simple Motor and Relay Interfaces
The Z86E3016SEG can coordinate low-complexity motors, relays, and directional outputs in compact electromechanical systems. Its 24 I/O lines provide enough control and status signals for position sensing, relay sequencing, limit detection, and fault flags, and the 16 MHz Z8 core can execute deterministic timing routines. The 4 KB OTP ROM supports a finalized embedded controller program, while the 236-byte RAM supports counters and operating states. The MCU should not drive relay coils or motor windings directly; use suitable transistor, MOSFET, or driver stages with flyback protection and isolation from supply noise. Keep the 4.5 V to 5.5 V MCU rail stable during load transitions and verify startup and brownout behavior of the complete actuator circuit.
अनुशंसित
Compact Embedded Instruments
The Z86E3016SEG is suitable for compact instruments and diagnostic equipment that combine digital controls with a modest display interface. The 16 MHz processor can handle button handling, measurement sequencing, status reporting, and basic data formatting, while 24 I/O lines can support display segments, indicators, and front-panel controls. The device's 4 KB OTP ROM and 236 bytes of RAM are appropriate for dedicated control rather than general-purpose application processing. A 5 V system architecture matches the specified 4.5 V to 5.5 V supply range. Use the manufacturer pin-description table to assign multiplexed functions correctly, and isolate display or interface currents from sensitive measurement paths with suitable grounding and filtering.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा Z86E3016SEG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | Z86E3016SSG | Z86E3016SEC |
|---|---|---|---|
| Brand | Zilog | Zilog | Zilog |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Processor Architecture | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 |
| Maximum Clock Speed | 16 MHz | 16 MHz | 16 MHz |
| Pin Count | 28 pins | 28 pins | 28 pins |
| Ordering-Suffix Difference | SEG | SSG | SEC |
मुख्य विशेषताएँ
- Maintains the same core operating parameters across the identified package-compatible candidates (बनामZ86E3016SSG)
- Retains a common 16 MHz, 28-pin Z8 platform for production redesigns (बनामZ86E3016SEC)
- Combines 24 I/O lines with one-time-programmable memory in a 28-pin SOIC (बनामZ86E3016SEC)
डिज़ाइन नोट्स
Treat the Z86E3016SEG program memory as permanently write-once. Validate the final firmware image, configuration bytes, checksum procedure, and programming fixture before committing devices to production. A failed or incorrect OTP program cannot be corrected by ordinary in-system programming, so keep programming-cycle traceability and establish a recovery plan for rejected or incorrectly programmed units.
Design the 5 V supply path for both the MCU and attached digital loads without allowing rail transients to exceed the specified 4.5 V to 5.5 V range. Place local high-frequency bypass capacitance close to the supply pins, provide adequate energy storage for switching loads, and keep relay, motor, and LED-driver return currents from sharing sensitive paths with the controller. Validate brownout behavior during startup and load transitions.
Use the 28-pin SOIC footprint and assign every net from the manufacturer pin-description table. Confirm which pins are power, ground, reset, oscillator, programming, and I/O functions before routing. Keep clock and programming traces short, provide a clear ground return, and separate externally switched nodes from sensitive inputs. Verify the PCB mask and pin-one orientation during assembly review.
The 24 I/O lines make pin grouping an important layout decision. Place connectors and switches according to their electrical function rather than forcing them into an arbitrary package order. Route high-current outputs through dedicated interface stages, and avoid sharing narrow copper paths between those outputs and quiet digital inputs. Grounding and decoupling arrangements should be reviewed as a complete current-loop system rather than isolated traces.
अनुपालन जानकारी
Zilog classifies the Z86E3016SEG as active and identifies it for industrial operation. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product documentation or declaration records.