Zilog

Z86E3016SEG - 8-Bit 16MHz OTP Microcontroller | Zilog

料号: Z86E3016SEG ✓ 量产中
4.5 V to 5.5 V Vdss 28-pin SOIC Package 16 MHz Speed 4 KB OTP ROM Memory
最小起订量: 1 |

Z86E3016SEG 概述

Zilog Z86E3016SEG is an 8-bit Z8 microcontroller with a 16 MHz clock, 4 KB one-time-programmable ROM, 236 bytes of RAM, and 24 I/O lines in a 28-pin SOIC package. The device operates from a 4.5 V to 5.5 V supply, targets industrial-temperature applications, and is classified by Zilog as active.

An 8-bit microcontroller is a compact embedded-control IC that integrates a processor core, program memory, data memory, and digital I/O into one package. In the product hierarchy, the Z86E3016SEG belongs to the Z8 family of 8-bit microcontrollers and combines a dedicated CPU core with OTP program storage. Its 16 MHz operating speed supports straightforward control logic, while 24 I/O lines provide connections to sensors, switches, indicators, actuators, and other digital peripherals.

Key features include 4 KB of OTP ROM, 236 bytes of RAM, 24 I/O lines, and a 16 MHz maximum clock. Programmable OTP options include an RC oscillator, EPROM protection, auto-latch disable, and programmable configurations. Because program memory is one-time programmable, firmware is permanently programmed during manufacturing or provisioning rather than rewritten during normal use.

The Z86E3016SEG uses the Z8 8-bit architecture and is designed for dedicated embedded-control tasks rather than high-compute workloads. Its 236-byte RAM supports working variables and short-lived data structures, while the 4 KB ROM provides 4096 bytes for fixed application instructions. The 24 digital I/O lines offer substantial interface capacity for compact controllers that do not require external memory or a high-speed communications interface.

Typical uses include industrial control panels, appliance controllers, simple motor-control interfaces, keypads, LED status systems, and compact embedded instruments. These applications benefit from the combination of a 16 MHz processor, 24 I/O lines, and a limited, predictable memory footprint. Designers should account for one-time programming when creating production firmware and verify the final code image before programming any sample or production device.

For new layouts, route the 24 I/O signals away from sensitive analog or clock circuitry and follow the pin-description table in the manufacturer datasheet when assigning PCB functions. Confirm oscillator, reset, programming, and supply connections against the exact package drawing. Because the OTP program is not reusable, production planning should include firmware validation, programming yield controls, and traceability for each programmed device.

直接替换替代料: Z86E3016SEG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: Z86E3016SEG (相同外形与封装尺寸) ——差异在于 Product Type, Program Memory Size, Program Memory Type, Supply Voltage.

Zilog
Program Memory Size: 4 KB (4K x 8)
Program Memory Type: One-time programmable ROM
Supply Voltage: 5 V
对比 Z86E3016SEG →
Zilog
Product Type: 8-bit microcontroller
Program Memory Size: 4 KB (4K x 8 bits)
Program Memory Type: One-time programmable (OTP)
对比 Z86E3016SEG →

Z86E3016SSG

✅ 直接替换
Zilog
📦 28-pin SOIC
8-bit microcontroller · Z8 series · 8-bit Z8 · 16 MHz · One-time programmable (OTP) · 4 KB (4K x 8 bits) · 125 bytes · 24

联系询价

查看数据手册 →

Z86E3016SEC

✅ 直接替换
Zilog
📦 28-pin SOIC
8-bit Z8 CISC microcontroller · 16 MHz · One-time programmable ROM · 4 KB (4K x 8) · 5 V · 28-pin SOIC · Small outline · 2.64 mm

联系询价

查看数据手册 →

Z86E3016SEG 最大额定值与电气特性

Product Type 8-bit Z8 microcontroller
Maximum Clock Speed 16 MHz
Program Memory 4 KB OTP ROM
Program Memory Organization 4K x 8 bits
RAM 236 bytes
I/O Lines 24 lines
电源电压 4.5 V to 5.5 V
Operating Range Industrial
封装 28-pin SOIC
引脚数量 28 pins
安装类型 Surface mount
Programmable OTP Option RC oscillator
Programmable OTP Option EPROM protection
Programmable OTP Option Auto-latch disable
Lifecycle Stage Active
RoHS 状态 unknown
REACH Status unknown
Automotive Qualification Not applicable
Lead-Free Status unknown
Halogen-Free Status unknown

Z86E3016SEG 28-pin soic 引脚配置指南

Z86E3016SEG(28-pin soic 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

Z86E3016SEG 的 28-pin soic 封装引脚图

暂无详细引脚数据: Z86E3016SEG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

Z86E3016SEG 适用于 6 应用s: Industrial Control Panels, Appliance and Equipment Controllers, LED Status and Signage Control, Keypad and Access-Control Interfaces, Simple Motor and Relay Interfaces, Compact Embedded Instruments.

🏭

Industrial Control Panels

The Z86E3016SEG suits compact industrial control panels where a controller must read switches, drive indicators, and coordinate discrete outputs. Its 24 I/O lines provide substantial peripheral capacity in a single 28-pin SOIC, while the 16 MHz Z8 processor handles fixed control sequences and debounce or state-management logic. The 4 KB OTP ROM is suitable for production firmware whose operating sequence is finalized before programming. Its industrial operating classification also makes it appropriate for equipment environments requiring a wider temperature grade than a consumer controller. Design the firmware around the 236-byte RAM limit and place the MCU close enough to connector circuitry to minimize long digital traces and susceptibility to industrial electrical noise.

🔧

Appliance and Equipment Controllers

The Z86E3016SEG can manage appliance and equipment control functions that combine multiple digital inputs with relays, indicators, and user interfaces. Its 24 I/O lines allow the controller to supervise buttons, mode switches, interlocks, and discrete outputs without requiring a separate I/O expander for moderate pin counts. The 16 MHz clock supports responsive sequencing, and the 4 KB OTP ROM provides space for a fixed control program that cannot be modified after delivery. The 4.5 V to 5.5 V operating range suits 5 V equipment architectures. Engineers should validate every connected actuator against the MCU pin limits and include appropriate interface components for inductive loads rather than driving them directly from an I/O pin.

💡

LED Status and Signage Control

The Z86E3016SEG is appropriate for simple LED status boards, annunciators, and process-indicator systems where multiple discrete outputs require coordinated timing. Its 24 I/O lines can be allocated among LEDs, acknowledgment inputs, and operating-mode controls, while the 16 MHz Z8 core executes blink patterns, fault flags, and debounce logic. The 4 KB OTP ROM is sufficient for a production appliance when the final program is known, and the 236-byte RAM accommodates display state and temporary counters. Use current-limiting resistors or an appropriate driver for LED strings and keep high-current loads away from MCU supply pins. Confirm the board's ground return and separation between switching loads and sensitive input circuitry.

🔐

Keypad and Access-Control Interfaces

The Z86E3016SEG can serve as the controller for compact keypads, credential readers, and access-control interfaces built around discrete digital signals. It provides 24 I/O lines for matrix scanning, status LEDs, lock control, and request inputs, while its 16 MHz processor supports real-time scanning and debounce routines. The 4 KB OTP ROM is appropriate for fixed firmware after programming, and the 236-byte RAM can hold keypad state, authentication status, and event variables. Security-sensitive designs should protect the OTP programming path and avoid retaining sensitive credentials in ordinary RAM. Validate electrical levels for the reader and lock-driver interfaces, and use transistor or FET drive stages rather than powering solenoids directly from the microcontroller.

⚡

Simple Motor and Relay Interfaces

The Z86E3016SEG can coordinate low-complexity motors, relays, and directional outputs in compact electromechanical systems. Its 24 I/O lines provide enough control and status signals for position sensing, relay sequencing, limit detection, and fault flags, and the 16 MHz Z8 core can execute deterministic timing routines. The 4 KB OTP ROM supports a finalized embedded controller program, while the 236-byte RAM supports counters and operating states. The MCU should not drive relay coils or motor windings directly; use suitable transistor, MOSFET, or driver stages with flyback protection and isolation from supply noise. Keep the 4.5 V to 5.5 V MCU rail stable during load transitions and verify startup and brownout behavior of the complete actuator circuit.

📟

Compact Embedded Instruments

The Z86E3016SEG is suitable for compact instruments and diagnostic equipment that combine digital controls with a modest display interface. The 16 MHz processor can handle button handling, measurement sequencing, status reporting, and basic data formatting, while 24 I/O lines can support display segments, indicators, and front-panel controls. The device's 4 KB OTP ROM and 236 bytes of RAM are appropriate for dedicated control rather than general-purpose application processing. A 5 V system architecture matches the specified 4.5 V to 5.5 V supply range. Use the manufacturer pin-description table to assign multiplexed functions correctly, and isolate display or interface currents from sensitive measurement paths with suitable grounding and filtering.

What is the Z86E3016SEG?
The Z86E3016SEG is a Zilog 8-bit Z8 microcontroller operating at up to 16 MHz. It contains 4 KB of one-time-programmable ROM, 236 bytes of RAM, and 24 I/O lines, and it is packaged in a 28-pin SOIC. According to the Zilog product documentation, the device is intended for dedicated embedded-control designs and is classified as active.
What are the key specifications of Z86E3016SEG that engineers should know?
The Z86E3016SEG combines a 16 MHz maximum clock, 4 KB of OTP ROM, 236 bytes of RAM, and 24 I/O lines in a 28-pin SOIC package. Its operating supply range is 4.5 V to 5.5 V, and Zilog classifies it for industrial applications. The manufacturer documentation also identifies programmable RC oscillator, EPROM protection, and auto-latch-disable options.
What is the operating voltage of Z86E3016SEG?
The Z86E3016SEG operates from 4.5 V to 5.5 V. According to the Zilog device specifications, this is a 5 V-class embedded controller with a 1 V total supply range. PCB power planning should therefore account for the specified upper limit of 5.5 V, including supply tolerance, transient margin, and the voltage required by attached peripherals.
How much memory and I/O does Z86E3016SEG provide?
The Z86E3016SEG provides 4 KB of one-time-programmable ROM, 236 bytes of RAM, and 24 digital I/O lines. The ROM is organized as 4K x 8 bits, while the RAM supports working variables and temporary state. The 24 I/O lines allow the device to connect directly to switches, indicators, sensors, and discrete control outputs.
Where can I download the Z86E3016SEG datasheet PDF?
The Z86E3016SEG datasheet PDF can be accessed through the Octopart datasheet page or the Zilog product listing linked from the manufacturer documentation. Use the Zilog datasheet as the controlling document for pin assignments, electrical limits, OTP programming, oscillator configuration, and application diagrams. The Octopart page may link directly to the manufacturer PDF or provide an additional download route.
Where can I find the Z86E3016SEG pinout?
The Z86E3016SEG uses a 28-pin SOIC package, and its complete pin assignment is defined in the manufacturer datasheet's pin-description table and package drawing. Assign PCB nets from that table rather than inferring connections from MCU family conventions. Pay particular attention to supply, ground, reset, oscillator, programming, and the 24 assigned I/O functions.
Where can I buy Z86E3016SEG online?
Use the Request a Quote form on this page to inquire about purchasing the Z86E3016SEG from XAIPART. The form is the appropriate route for current unit availability, order quantities, lead time, and supply requirements. Because the part uses one-time-programmable memory, confirm the required firmware, programming process, and delivery condition before placing a production order.
What is the price of Z86E3016SEG?
The current Z86E3016SEG price is obtained through the Request a Quote form on this page. The quote request should state the required quantity, programmed or unprogrammed delivery condition, and production schedule. Since Z86E3016SEG contains OTP program memory, programmed-device requirements may affect the order workflow and should be specified explicitly.
What is the lead time for Z86E3016SEG?
The current lead time for Z86E3016SEG should be confirmed through the Request a Quote form on this page. Include your annual usage, production lot size, firmware status, and required delivery date in the request. This information allows the supply team to determine an appropriate order plan without publishing a potentially outdated lead-time estimate.
Is Z86E3016SEG in stock?
Current stock for Z86E3016SEG is handled through the Request a Quote form on this page. State the quantity, target delivery date, and whether the devices require OTP programming. Zilog identifies the component as active, but current availability can vary by package, quantity, firmware condition, and production schedule, so stock should be confirmed for the exact order.
What is the difference between Z86E3016SEG and Z86E3016SEC?
The Z86E3016SEG and Z86E3016SEC share the principal 16 MHz clock, 4 KB OTP ROM, 236-byte RAM, 24 I/O lines, and 28-pin SOIC configuration identified in the Z8 family documentation. Their ordering suffixes indicate different device grades or order configurations, so the temperature and qualification requirements should be checked before substitution. The package and core function remain compatible.
When should I choose Z86E3016SEG over Z86E3016SEC?
Choose Z86E3016SEG when the ordering configuration requires the industrial-grade option associated with the SEG suffix. The Z86E3016SEC is a closely related SOIC-28 device with the same 16 MHz clock and 4 KB OTP ROM. Before replacing one with the other, verify the manufacturer ordering table against the required temperature range, qualification target, marking, and production documentation.
What can replace Z86E3016SEG?
Z86E3016SSG and Z86E3016SEC are the closest same-brand drop-in candidates identified for the Z86E3016SEG, both associated with the 16 MHz, 28-pin Z8 microcontroller configuration. Their shared package and core parameters support PCB-level substitution, but temperature grade, ordering suffix, OTP programming, and qualification requirements must still be checked. No verified cross-brand drop-in replacement is listed for this device.
Is Z86E3016SSG the same as Z86E3016SEG?
The Z86E3016SSG is a closely related Zilog SOIC-28 Z8 microcontroller with the same 16 MHz operating speed, 28-pin format, and broadly comparable memory and I/O organization. The MPN suffix identifies a different order configuration, so the devices should not be treated as literally identical until the ordering table and temperature requirements are reviewed. Both support the same-footprint replacement path.
What is the best cross-brand equivalent for Z86E3016SEG?
No verified cross-brand drop-in equivalent is identified for the Z86E3016SEG. A replacement must preserve the 28-pin SOIC footprint, 4.5 V to 5.5 V supply range, 16 MHz clock, 4 KB OTP program memory, 236-byte RAM, and 24 I/O lines while matching the industrial operating requirement. The Request a Quote form can be used to discuss availability of the verified same-brand candidates.

工程参考数据: Z86E3016SEG ——对比、设计指导和合规信息。

选型指南

Choose the Z86E3016SEG for a compact 8-bit industrial-control design that needs a 16 MHz clock, 4 KB of OTP program memory, 236 bytes of RAM, 24 I/O lines, and a 28-pin SOIC footprint. Z86E3016SSG is a closely related same-brand candidate when its ordering configuration satisfies the product specification, while Z86E3016SEC can support a footprint-compatible migration when its temperature grade is acceptable. In either case, verify the manufacturer ordering information, electrical limits, qualification target, and OTP programming process before releasing a production order. Do not select an alternative solely because the package and clock rate match; temperature grade, pin functions, and intended product conditions must also agree. No verified cross-brand drop-in substitute is presented, so a cross-brand migration should be treated as a redesign unless a manufacturer confirms exact compatibility.

与替代料对比

参数 本产品 Z86E3016SSG Z86E3016SEC
Brand Zilog Zilog Zilog
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC
Processor Architecture 8-bit Z8 8-bit Z8 8-bit Z8
Maximum Clock Speed 16 MHz 16 MHz 16 MHz
Pin Count 28 pins 28 pins 28 pins
Ordering-Suffix Difference SEG SSG SEC

关键差异点

  • Maintains the same core operating parameters across the identified package-compatible candidates (对比 Z86E3016SSG)
  • Retains a common 16 MHz, 28-pin Z8 platform for production redesigns (对比 Z86E3016SEC)
  • Combines 24 I/O lines with one-time-programmable memory in a 28-pin SOIC (对比 Z86E3016SEC)

设计说明

Treat the Z86E3016SEG program memory as permanently write-once. Validate the final firmware image, configuration bytes, checksum procedure, and programming fixture before committing devices to production. A failed or incorrect OTP program cannot be corrected by ordinary in-system programming, so keep programming-cycle traceability and establish a recovery plan for rejected or incorrectly programmed units.

Design the 5 V supply path for both the MCU and attached digital loads without allowing rail transients to exceed the specified 4.5 V to 5.5 V range. Place local high-frequency bypass capacitance close to the supply pins, provide adequate energy storage for switching loads, and keep relay, motor, and LED-driver return currents from sharing sensitive paths with the controller. Validate brownout behavior during startup and load transitions.

Use the 28-pin SOIC footprint and assign every net from the manufacturer pin-description table. Confirm which pins are power, ground, reset, oscillator, programming, and I/O functions before routing. Keep clock and programming traces short, provide a clear ground return, and separate externally switched nodes from sensitive inputs. Verify the PCB mask and pin-one orientation during assembly review.

The 24 I/O lines make pin grouping an important layout decision. Place connectors and switches according to their electrical function rather than forcing them into an arbitrary package order. Route high-current outputs through dedicated interface stages, and avoid sharing narrow copper paths between those outputs and quiet digital inputs. Grounding and decoupling arrangements should be reviewed as a complete current-loop system rather than isolated traces.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Zilog classifies the Z86E3016SEG as active and identifies it for industrial operation. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product documentation or declaration records.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

Z86E3016SEG datasheet Z86E3016SEG datasheet pdf Z86E3016SEG pinout Z86E3016SEG specifications Z86E3016SEG equivalent Z86E3016SEG replacement Z86E3016SEG cross reference Z86E3016SEG vs Z86E3016SEC Z86E3016SEG footprint Z86E3016SEG application circuit Z86E3016SEG price Zilog Z86E3016SEG

相关元器件 & 术语

Zilog Z86E3016SEG Z86E3016SSG Z86E3016SEC Z8 8-bit microcontroller embedded controller microcontroller IC integrated circuit semiconductor one-time-programmable memory OTP ROM random-access memory RAM 16 MHz clock 24 I/O lines industrial control appliance controller LED status control motor interface keypad interface 28-pin SOIC SOIC package surface-mount package 5 V supply
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情