Zilog

Z86E3412PSC - 8-Bit 12MHz OTP Microcontroller | Zilog

MPN: Z86E3412PSC ✓ सक्रिय
3.5 V to 5.5 V Vdss PDIP-28 Package 12 MHz Speed One-Time Programmable (OTP) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

Z86E3412PSC अवलोकन

The Zilog Z86E3412PSC is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz, with 16 KB of one-time-programmable program memory, 237 bytes of RAM, and a 28-pin PDIP package. It is designed for compact embedded-control systems that require deterministic digital I/O, low-cost ROM-based program storage, and operation from a 3.5 V to 5.5 V supply.

A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripheral functions on one integrated circuit. The Z8 belongs to the broader 8-bit microcontroller category within embedded processors and embedded logic devices. The Z86E3412PSC uses one-time-programmable memory, allowing the application program to be written once during manufacturing or final programming rather than rewritten in the field.

The device features an 8-bit data bus, a maximum clock frequency of 12 MHz, and 16 KB organized as 16K x 8 bits of OTP program memory. Its 237 bytes of RAM provide working space for variables, stack operations, and control state. The commercial-temperature component is supplied in a through-hole PDIP-28 package, simplifying prototype assembly, inspection, and hand soldering.

The Z8 core is intended for embedded applications where modest computational throughput is sufficient. At 12 MHz, the device can handle digital control, sequencing, keypad or switch input processing, discrete output control, and status indication without requiring a separate processor. Because program storage is OTP rather than reprogrammable flash, firmware changes require a new programmed device, so firmware validation must occur before final programming.

Typical uses include appliance control panels, small industrial control modules, instrumentation interfaces, programmable timers, LED status systems, and dedicated sequence controllers. The 28-pin through-hole format is particularly useful where boards are assembled manually or where a socketed controller simplifies replacement during prototype validation. The absence of USB, SPI, I2C, UART, and CAN channels makes it most appropriate for designs centered on parallel digital control rather than modern serial connectivity.

Designers should plan the power rail for 3.5 V to 5.5 V operation and assign unused pins according to the manufacturer pin-description table. Because OTP memory cannot be erased, validate the complete firmware image before programming the production parts. Confirm reset, oscillator, and I/O requirements against the Zilog datasheet before releasing the PCB footprint.

This page combines the Z86E3412PSC device specifications, package details, sourcing information, comparison parameters, and practical design guidance in one engineering-focused reference. It also identifies the directly comparable Z86E3412PSG and clearly distinguishes what is confirmed from information that requires confirmation.

के लिए ड्रॉप-इन विकल्प Z86E3412PSC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं Z86E3412PSC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package Type.

Zilog
Package Type: 28-pin DIP through-hole package
इसके साथ तुलना करें Z86E3412PSC →

Z86E3412PSG

✅ ड्रॉप-इन
Zilog
📦 PDIP-28
8-bit CMOS Z8 microcontroller · 12 MHz · One-time programmable (OTP) · 16 KB · 16K x 8 bits · 5.00 V · 5.50 V · 28-pin DIP through-hole package

कीमत के लिए संपर्क करें

डेटाशीट देखें →

Z86E3412PSC Maximum Ratings और Electrical Characteristics

Core Architecture Z8 8-bit CISC core
Maximum CPU Frequency 12 MHz
डेटा बस चौड़ाई 8-bit
Program Memory Type One-Time Programmable (OTP)
Program Memory Capacity 16 KB (16K x 8 bits)
RAM Capacity 237 bytes
ऑपरेटिंग सप्लाई वोल्टेज 3.5 V to 5.5 V
Temperature Grade Commercial
Package Type PDIP-28
माउंटिंग प्रकार Through-hole
पिन काउंट 28 pins
Package Body Shape Rectangular
USB Channels 0 channels
SPI Channels 0 channels
UART Channels 0 channels
I2C Channels 0 channels
CAN Channels 0 channels
USART Channels 0 channels

Z86E3412PSC rectangular पिन कॉन्फ़िगरेशन गाइड

Z86E3412PSC (rectangular पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

Z86E3412PSC के लिए rectangular पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: Z86E3412PSC.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

Z86E3412PSC के लिए उपयुक्त है 6 अनुप्रयोगs: Appliance Control Panel, Industrial Sequence Controller, Programmable Timer Module, LED Status and Sequencer, Small Instrumentation Interface, Prototype and Education Controller.

🔧

Appliance Control Panel

The Z86E3412PSC fits appliance control panels that coordinate switch inputs, indicators, relays, and timed sequences through parallel digital I/O. Its 12 MHz Z8 core provides more than enough processing speed for debouncing, state-machine control, and simple timing, while 16 KB of OTP program memory can hold the complete production application. The 28-pin PDIP package also makes the controller practical for prototype boards and hand-assembled service units. Because the program memory is one-time programmable, engineers should freeze and verify the firmware image before production programming. The absence of UART, I2C, SPI, USB, and CAN channels makes the part most appropriate when the user interface and actuator wiring are primarily discrete.

🏭

Industrial Sequence Controller

The Z86E3412PSC is suited to industrial sequence-control modules that drive discrete outputs according to timers, interlocks, and input conditions. Its 12 MHz operating frequency supports responsive state-machine execution, and its 237 bytes of RAM hold counters, flags, and stack operations for compact control logic. The 3.5 V to 5.5 V supply range supports conventional embedded-control rails. A 28-pin through-hole package simplifies both initial assembly and socket-based maintenance during equipment development. The design should include appropriate input conditioning and output-driver circuitry because the MCU itself is intended primarily for digital control rather than direct high-voltage or high-current actuator drive.

⏱️

Programmable Timer Module

A programmable timer module can use the Z86E3412PSC to combine multiple timing intervals, elapsed counters, mode selection, and relay or indicator outputs. The 8-bit core and 12 MHz clock are appropriate for deterministic event sequencing, while 16 KB of OTP program memory provides room for a fixed control program. Its 237 bytes of RAM supports time-base variables and state flags without requiring external memory. The PDIP-28 package allows straightforward point-to-point wiring and a large exposed prototyping area. Engineers should base timer accuracy on the selected oscillator implementation and verify startup, reset, and I/O timing in the Zilog Z86E3412PSC datasheet rather than assuming accuracy solely from the CPU frequency.

💡

LED Status and Sequencer

The Z86E3412PSC can drive LED status indicators, rotating displays, warning lamps, and sequencing patterns through parallel output ports. Its 12 MHz processing rate is more than sufficient for debounce handling, animation timing, and combined indicator logic, while 16 KB of OTP memory accommodates a fixed lookup table and control state machine. The through-hole 28-pin package supports both permanent PCB assembly and prototype interchange. Current-limiting resistors or suitable driver stages should be selected for the attached LEDs, and port-drive limits should be checked in the manufacturer datasheet. Because OTP firmware cannot be revised in the field, indicator behavior should be validated against every production hardware revision before programming.

📺

Small Instrumentation Interface

The Z86E3412PSC can serve as the supervisory controller in a small instrument when the interface consists mainly of switches, status lines, display segments, and discrete sensor outputs. Its 8-bit architecture, 12 MHz clock, and 237 bytes of RAM are appropriate for status acquisition, calibration tables, and menu-state management in modest embedded systems. The 3.5 V to 5.5 V operating range integrates readily with conventional logic levels, subject to individual pin limits. Because the controller provides no stated USB, SPI, I2C, UART, or CAN channel, the instrument should use parallel signaling or add a separate interface device when high-speed serial communication is essential.

🧩

Prototype and Education Controller

The Z86E3412PSC is useful in microcontroller education and prototype development because its through-hole PDIP-28 package is easy to mount on a breadboard or perforated board. Learners can use its 12 MHz Z8 core and 16 KB OTP program memory for foundational embedded-control exercises involving digital inputs, outputs, timing, counters, and state machines. The 3.5 V to 5.5 V supply range also simplifies connection to conventional laboratory logic. Because the program memory is OTP, development should use reprogrammable practice parts or expendable devices until the firmware is stable; otherwise each code revision requires a new programmed microcontroller.

What is the Z86E3412PSC?
The Z86E3412PSC is a Zilog 8-bit Z8 CMOS microcontroller with a 12 MHz maximum clock, 16 KB of OTP program memory, 237 bytes of RAM, and a 28-pin PDIP package. According to the Zilog Z86E3412PSC datasheet, it targets compact embedded-control designs using parallel digital I/O and a 3.5 V to 5.5 V supply.
How much program memory and RAM does the Z86E3412PSC have?
The Z86E3412PSC provides 16 KB of one-time-programmable program memory and 237 bytes of RAM. The Zilog Z86E3412PSC datasheet identifies the program memory as 16K x 8 bits. This combination suits small control programs, but the OTP program area cannot be rewritten, so firmware should be fully validated before the devices are programmed.
What is the operating voltage of Z86E3412PSC?
The Z86E3412PSC operates from 3.5 V to 5.5 V. The manufacturer technical listing identifies this as the typical operating supply range. Design the board power rail, bypass capacitors, and I/O levels to remain compatible with that range, and confirm absolute maximum ratings in the Zilog Z86E3412PSC datasheet.
What is the maximum clock frequency of Z86E3412PSC?
The maximum CPU frequency of the Z86E3412PSC is 12 MHz. This value comes from the Zilog Z86E3412PSC datasheet and the product specifications published by Zilog. It provides enough throughput for parallel digital control, sequencing, timing, and status-logic tasks, although the device does not include USB, SPI, I2C, UART, or CAN channels.
Where can I download the Z86E3412PSC datasheet PDF?
The Z86E3412PSC datasheet PDF is available at https://www.ariat-tech.com/datasheets/3333155548/Z86E3412PSC.pdf. Use the manufacturer pin-description and electrical-characteristics sections when assigning PCB signals, selecting decoupling, and checking operating limits. The Zilog Z86E3412PSC datasheet is the controlling reference for design decisions.
Where is the pinout for Z86E3412PSC?
The Z86E3412PSC uses a 28-pin PDIP package, and its numbered pin assignments are shown in the pin-description section of the Zilog Z86E3412PSC datasheet. The package library representation used for this product is dip-28. Assign every pin from the manufacturer table rather than inferring unused-pin functions from neighboring Z8 devices.
Can the Z86E3412PSG replace the Z86E3412PSC?
The Z86E3412PSG is the closest identified drop-in alternative because it retains the 28-pin PDIP format and the same Z8 8-bit architecture, 12 MHz maximum frequency, 16 KB OTP program memory, and 237-byte RAM classification. Its temperature-grade suffix differs, so it should be selected only when that grading change is acceptable. The alternative is identified in a direct Zilog comparison.
What is the best drop-in replacement for Z86E3412PSC?
The Z86E3412PSG is the best identified drop-in replacement for a PCB using the 28-pin PDIP footprint. It retains the 12 MHz Z8 core, 16 KB OTP memory, 237 bytes of RAM, and through-hole package. Confirm the operating-temperature grade and all production firmware requirements before substitution, because the suffix indicates a difference in device grading.
What can replace the Z86E3412PSC?
The Z86E3412PSG can replace the Z86E3412PSC when a 28-pin PDIP, 12 MHz, 16 KB OTP Z8 device is required. The two parts share the principal digital-control characteristics identified in their direct comparison. No cross-brand replacement is established here, and any proposed substitute must pass pin, voltage, memory, timing, and programming-compatibility review.
Is the Z86E3412PSC the same as the Z86E3412PSG?
The Z86E3412PSC and Z86E3412PSG are closely related rather than identical in every ordering detail. Both use the Z8 8-bit architecture, operate up to 12 MHz, provide 16 KB of OTP memory and 237 bytes of RAM, and use a 28-pin PDIP package. The suffix distinction should be checked against the required commercial or extended temperature grade.
Z86E3412PSC vs Z86E3412PSG - which is better for industrial control?
Choose the Z86E3412PSC when the design requires the commercial-temperature device, and choose the Z86E3412PSG when its temperature grade is suitable for the installation environment. Both are 12 MHz, 8-bit Z8 controllers with 16 KB OTP program memory, 237 bytes of RAM, and 28-pin PDIP packaging, so the temperature-grade requirement is the primary documented distinction.
When should I choose the Z86E3412PSC over another 8-bit microcontroller?
Choose the Z86E3412PSC when a low-cost, ROM-programmed controller with 12 MHz performance, 16 KB OTP storage, and a through-hole 28-pin package matches the design. It is appropriate for parallel I/O control and sequencing but is not a fit where USB, SPI, I2C, UART, CAN, or field-updatable flash is required. Those interface needs should drive a different MCU selection.
Is the Z86E3412PSC suitable for an OTP-based control system?
The Z86E3412PSC is suitable for an OTP-based control system because it includes 16 KB of one-time-programmable program memory. The trade-off is that the firmware cannot be changed after programming. Use prototype devices or sockets during development, validate the final image, and only commit programmed OTP parts to production after all functional tests pass.
Where can I buy Z86E3412PSC and what is its price?
Use the Request a Quote form on this page to inquire about Z86E3412PSC pricing, stock, order quantities, and lead time. The form keeps the request tied to the exact 28-pin PDIP part number. Current commercial terms can vary with programming status, quantity, packaging, and delivery requirements, so request confirmation for the intended build.
What is the lead time for Z86E3412PSC?
The current lead time for Z86E3412PSC should be requested through the Request a Quote form on this page. Include the required quantity, whether the devices need programming, the acceptable package form, and the target delivery date. This provides a purchasing response for the exact Z86E3412PSC order rather than a generic MCU estimate.
Is Z86E3412PSC in stock?
Current inventory for Z86E3412PSC should be confirmed through the Request a Quote form on this page. Include your required quantity and whether unprogrammed devices are acceptable. The Zilog device is identified as an 8-bit, 12 MHz, 16 KB OTP microcontroller in a 28-pin PDIP package, allowing the sourcing request to reference the exact configuration.
Does the Z86E3412PSC support USB, SPI, I2C, UART, or CAN?
The Z86E3412PSC does not list USB, SPI, I2C, UART, or CAN channels. The published product specifications identify zero channels for each of those interfaces. It is therefore best suited to designs using parallel digital I/O, counters, timers, switches, displays, and discrete outputs rather than applications that depend on modern serial connectivity.
What are the key specifications of Z86E3412PSC that engineers should know?
The key Z86E3412PSC specifications are an 8-bit Z8 core, 12 MHz maximum frequency, 16 KB OTP program memory, 237 bytes of RAM, 3.5 V to 5.5 V operation, and a 28-pin PDIP package. According to the Zilog Z86E3412PSC datasheet, the device has no USB, SPI, I2C, UART, or CAN channels, making parallel embedded control its primary use case.

के लिए इंजीनियरिंग संदर्भ डेटा Z86E3412PSC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the Z86E3412PSC for a compact, parallel-I/O control system that uses an 8-bit Z8 core, 12 MHz processing, 16 KB of OTP program memory, 237 bytes of RAM, and a 28-pin PDIP footprint. It is well matched to appliance panels, timers, sequencing modules, status indicators, and prototype controllers where firmware is fixed before production. The Z86E3412PSG is the practical drop-in alternative when its temperature-grade suffix satisfies the environmental requirement, because it retains the same package, frequency, memory, and RAM. Do not select either device when field-reprogrammable flash or native USB, SPI, I2C, UART, or CAN connectivity is mandatory. For those requirements, choose an MCU with the required interface blocks and a suitable development path rather than attempting to adapt the Z86E3412PSC.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद Z86E3412PSG
Package PDIP-28 PDIP-28
Brand Zilog Zilog
Core Architecture Z8 8-bit CISC core Z8 8-bit CISC core
Maximum Frequency 12 MHz 12 MHz
Program Memory 16 KB OTP 16 KB OTP
RAM 237 bytes 237 bytes
Operating Supply Voltage 3.5 V to 5.5 V 3.5 V to 5.5 V
Mounting Style Through-hole Through-hole
Serial Interface Channels 0 USB, 0 SPI, 0 I2C, 0 UART, and 0 CAN channels 0 USB, 0 SPI, 0 I2C, 0 UART, and 0 CAN channels

मुख्य विशेषताएँ

  • Identical core and memory configuration in the identified drop-in alternative (बनामZ86E3412PSG)
  • Same 28-pin through-hole footprint (बनामZ86E3412PSG)
  • Commercial-temperature target configuration (बनामZ86E3412PSG)

डिज़ाइन नोट्स

Do not attempt to update firmware after the OTP program memory has been written. Complete functional testing on expendable or development devices, generate the final image from a controlled source, and verify its checksum before programming production units. This is especially important for appliances and industrial controllers because a programming error cannot be corrected by in-field reflashing.

Design the supply network for the documented 3.5 V to 5.5 V operating range and follow the manufacturer recommendations for decoupling and pin connections. Place the required bypass capacitor close to the supply pin, minimize trace resistance between the capacitor and device, and verify startup behavior across the intended supply range. Do not infer an absolute maximum rating from the typical operating range.

Use a PCB footprint and socket or connector plan compatible with the 28-pin PDIP package. Maintain adequate spacing for through-hole solder joints, keep signal routing away from noisy switching nodes where practical, and reserve access to programming and test points. The through-hole format is beneficial for prototypes, but production designs should still account for component height, serviceability, and mechanical clearance.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the Z86E3412PSC. The device is commercial grade rather than an automotive-qualified AEC-Q100 variant.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

Z86E3412PSC datasheet Z86E3412PSC datasheet pdf Z86E3412PSC pinout Z86E3412PSC specifications Z86E3412PSC equivalent Z86E3412PSC replacement Z86E3412PSC vs Z86E3412PSG Z86E3412PSC PDIP-28 footprint Zilog Z86E3412PSC Z86E3412PSC price Z86E3412PSC stock Z86E3412PSC 12MHz OTP microcontroller Z86E3412PSC 16KB microcontroller Z86E3412PSC application circuit How to replace Z86E3412PSC

संबंधित कंपोनेंट्स और शब्द

Zilog Z86E3412PSC Z86E3412PSG Z8 Z8 8-bit CISC core 8-bit microcontroller embedded microcontroller CMOS microcontroller one-time programmable memory OTP program memory 16 KB program memory 237-byte RAM 12 MHz clock PDIP-28 through-hole package DIP package family 3.5 V to 5.5 V supply parallel digital I/O appliance control industrial sequence control LED sequencer instrumentation interface timer module
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें