Z86E3412PSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Référence : Z86E3412PSC ✓ ActifZ86E3412PSC Présentation
A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripheral functions on one integrated circuit. The Z8 belongs to the broader 8-bit microcontroller category within embedded processors and embedded logic devices. The Z86E3412PSC uses one-time-programmable memory, allowing the application program to be written once during manufacturing or final programming rather than rewritten in the field.
The device features an 8-bit data bus, a maximum clock frequency of 12 MHz, and 16 KB organized as 16K x 8 bits of OTP program memory. Its 237 bytes of RAM provide working space for variables, stack operations, and control state. The commercial-temperature component is supplied in a through-hole PDIP-28 package, simplifying prototype assembly, inspection, and hand soldering.
The Z8 core is intended for embedded applications where modest computational throughput is sufficient. At 12 MHz, the device can handle digital control, sequencing, keypad or switch input processing, discrete output control, and status indication without requiring a separate processor. Because program storage is OTP rather than reprogrammable flash, firmware changes require a new programmed device, so firmware validation must occur before final programming.
Typical uses include appliance control panels, small industrial control modules, instrumentation interfaces, programmable timers, LED status systems, and dedicated sequence controllers. The 28-pin through-hole format is particularly useful where boards are assembled manually or where a socketed controller simplifies replacement during prototype validation. The absence of USB, SPI, I2C, UART, and CAN channels makes it most appropriate for designs centered on parallel digital control rather than modern serial connectivity.
Designers should plan the power rail for 3.5 V to 5.5 V operation and assign unused pins according to the manufacturer pin-description table. Because OTP memory cannot be erased, validate the complete firmware image before programming the production parts. Confirm reset, oscillator, and I/O requirements against the Zilog datasheet before releasing the PCB footprint.
This page combines the Z86E3412PSC device specifications, package details, sourcing information, comparison parameters, and practical design guidance in one engineering-focused reference. It also identifies the directly comparable Z86E3412PSG and clearly distinguishes what is confirmed from information that requires confirmation.
Alternatives de remplacement direct pour Z86E3412PSC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec Z86E3412PSC (même facteur de forme et même empreinte) — différant par Package Type.
Z86E3412PSG
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →Z86E3412PSC Valeurs maximales et caractéristiques électriques
| Core Architecture | Z8 8-bit CISC core |
| Maximum CPU Frequency | 12 MHz |
| Largeur du bus de données | 8-bit |
| Program Memory Type | One-Time Programmable (OTP) |
| Program Memory Capacity | 16 KB (16K x 8 bits) |
| RAM Capacity | 237 bytes |
| Tension d'alimentation de fonctionnement | 3.5 V to 5.5 V |
| Temperature Grade | Commercial |
| Package Type | PDIP-28 |
| Type de montage | Through-hole |
| Nombre de broches | 28 pins |
| Package Body Shape | Rectangular |
| USB Channels | 0 channels |
| SPI Channels | 0 channels |
| UART Channels | 0 channels |
| I2C Channels | 0 channels |
| CAN Channels | 0 channels |
| USART Channels | 0 channels |
Guide de configuration des broches du Z86E3412PSC rectangular
Configuration des broches du Z86E3412PSC (boîtier rectangular). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour Z86E3412PSC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
Z86E3412PSC convient pour 6 applications: Appliance Control Panel, Industrial Sequence Controller, Programmable Timer Module, LED Status and Sequencer, Small Instrumentation Interface, Prototype and Education Controller.
Appliance Control Panel
The Z86E3412PSC fits appliance control panels that coordinate switch inputs, indicators, relays, and timed sequences through parallel digital I/O. Its 12 MHz Z8 core provides more than enough processing speed for debouncing, state-machine control, and simple timing, while 16 KB of OTP program memory can hold the complete production application. The 28-pin PDIP package also makes the controller practical for prototype boards and hand-assembled service units. Because the program memory is one-time programmable, engineers should freeze and verify the firmware image before production programming. The absence of UART, I2C, SPI, USB, and CAN channels makes the part most appropriate when the user interface and actuator wiring are primarily discrete.
Recommandé
Industrial Sequence Controller
The Z86E3412PSC is suited to industrial sequence-control modules that drive discrete outputs according to timers, interlocks, and input conditions. Its 12 MHz operating frequency supports responsive state-machine execution, and its 237 bytes of RAM hold counters, flags, and stack operations for compact control logic. The 3.5 V to 5.5 V supply range supports conventional embedded-control rails. A 28-pin through-hole package simplifies both initial assembly and socket-based maintenance during equipment development. The design should include appropriate input conditioning and output-driver circuitry because the MCU itself is intended primarily for digital control rather than direct high-voltage or high-current actuator drive.
Recommandé
Programmable Timer Module
A programmable timer module can use the Z86E3412PSC to combine multiple timing intervals, elapsed counters, mode selection, and relay or indicator outputs. The 8-bit core and 12 MHz clock are appropriate for deterministic event sequencing, while 16 KB of OTP program memory provides room for a fixed control program. Its 237 bytes of RAM supports time-base variables and state flags without requiring external memory. The PDIP-28 package allows straightforward point-to-point wiring and a large exposed prototyping area. Engineers should base timer accuracy on the selected oscillator implementation and verify startup, reset, and I/O timing in the Zilog Z86E3412PSC datasheet rather than assuming accuracy solely from the CPU frequency.
Recommandé
LED Status and Sequencer
The Z86E3412PSC can drive LED status indicators, rotating displays, warning lamps, and sequencing patterns through parallel output ports. Its 12 MHz processing rate is more than sufficient for debounce handling, animation timing, and combined indicator logic, while 16 KB of OTP memory accommodates a fixed lookup table and control state machine. The through-hole 28-pin package supports both permanent PCB assembly and prototype interchange. Current-limiting resistors or suitable driver stages should be selected for the attached LEDs, and port-drive limits should be checked in the manufacturer datasheet. Because OTP firmware cannot be revised in the field, indicator behavior should be validated against every production hardware revision before programming.
Recommandé
Small Instrumentation Interface
The Z86E3412PSC can serve as the supervisory controller in a small instrument when the interface consists mainly of switches, status lines, display segments, and discrete sensor outputs. Its 8-bit architecture, 12 MHz clock, and 237 bytes of RAM are appropriate for status acquisition, calibration tables, and menu-state management in modest embedded systems. The 3.5 V to 5.5 V operating range integrates readily with conventional logic levels, subject to individual pin limits. Because the controller provides no stated USB, SPI, I2C, UART, or CAN channel, the instrument should use parallel signaling or add a separate interface device when high-speed serial communication is essential.
Recommandé
Prototype and Education Controller
The Z86E3412PSC is useful in microcontroller education and prototype development because its through-hole PDIP-28 package is easy to mount on a breadboard or perforated board. Learners can use its 12 MHz Z8 core and 16 KB OTP program memory for foundational embedded-control exercises involving digital inputs, outputs, timing, counters, and state machines. The 3.5 V to 5.5 V supply range also simplifies connection to conventional laboratory logic. Because the program memory is OTP, development should use reprogrammable practice parts or expendable devices until the firmware is stable; otherwise each code revision requires a new programmed microcontroller.
Recommandé
Données de référence d'ingénierie pour Z86E3412PSC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | Z86E3412PSG |
|---|---|---|
| Package | PDIP-28 | PDIP-28 |
| Brand | Zilog | Zilog |
| Core Architecture | Z8 8-bit CISC core | Z8 8-bit CISC core |
| Maximum Frequency | 12 MHz | 12 MHz |
| Program Memory | 16 KB OTP | 16 KB OTP |
| RAM | 237 bytes | 237 bytes |
| Operating Supply Voltage | 3.5 V to 5.5 V | 3.5 V to 5.5 V |
| Mounting Style | Through-hole | Through-hole |
| Serial Interface Channels | 0 USB, 0 SPI, 0 I2C, 0 UART, and 0 CAN channels | 0 USB, 0 SPI, 0 I2C, 0 UART, and 0 CAN channels |
Principaux différenciateurs
- Identical core and memory configuration in the identified drop-in alternative (vs Z86E3412PSG)
- Same 28-pin through-hole footprint (vs Z86E3412PSG)
- Commercial-temperature target configuration (vs Z86E3412PSG)
Notes de conception
Do not attempt to update firmware after the OTP program memory has been written. Complete functional testing on expendable or development devices, generate the final image from a controlled source, and verify its checksum before programming production units. This is especially important for appliances and industrial controllers because a programming error cannot be corrected by in-field reflashing.
Design the supply network for the documented 3.5 V to 5.5 V operating range and follow the manufacturer recommendations for decoupling and pin connections. Place the required bypass capacitor close to the supply pin, minimize trace resistance between the capacitor and device, and verify startup behavior across the intended supply range. Do not infer an absolute maximum rating from the typical operating range.
Use a PCB footprint and socket or connector plan compatible with the 28-pin PDIP package. Maintain adequate spacing for through-hole solder joints, keep signal routing away from noisy switching nodes where practical, and reserve access to programming and test points. The through-hole format is beneficial for prototypes, but production designs should still account for component height, serviceability, and mechanical clearance.
Informations de conformité
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the Z86E3412PSC. The device is commercial grade rather than an automotive-qualified AEC-Q100 variant.