Produk (42.000+)

PEX8612-BB50RBCF - 12-Lane PCIe 2.0 Switch | Broadcom
PEX8612-BB50RBCF

PEX8612-BB50RBCF - 12-Lane PCIe 2.0 Switch | Broadcom

Broadcom PEX8612-BB50RBCF is a 12-lane, 3-port PCI Express Gen 2 switching IC with integrated 5.0 GT/s SerDes, supplied in a 324-ball FCBGA package measuring 19 x 19 mm. The device supports a commercial temperature grade and is identified as a CMOS PCI bus controller with ball terminals and a square package. A PCI Express switch is a semiconductor device that routes high-speed serial lanes between a host or upstream endpoint and multiple downstream endpoints. Within the interface hierarchy, the PEX8612 belongs to the PCI Express switch-controller family, using lane switching to expand connectivity without adding a separate host bridge. This makes it useful where multiple PCIe devices must share a limited upstream link or where expansion and fabric-management functions are required. Key features include support for 12 PCIe lanes, three ports, PCIe Gen 2 operation, integrated 5.0 GT/s serializers and deserializers, and typical power dissipation of 1.5 W. The 324-ball FCBGA package supports compact, high-density server and embedded-system designs. Its I2C technology designation provides a management interface, while the lead-free construction and RoHS features align with modern environmental requirements. The PEX8612 architecture consolidates multiple PCIe links into a switching fabric and allows downstream devices to operate behind a common upstream connection. Integrated SerDes reduces the need for external transceiver circuitry, while the compact BGA footprint supports high-density routing on multilayer boards. Because the device has 324 terminals, PCB design must include careful ball assignment, power distribution, and high-speed signal-integrity work. Typical applications include server expansion, storage systems, embedded computing platforms, industrial controllers, and networked edge equipment. In each case, the switch provides a practical way to add PCIe endpoint connectivity while preserving the 5.0 GT/s PCIe Gen 2 signaling rate. The three-port arrangement is particularly relevant to systems connecting several NVMe, network, or accelerator devices behind a single host interface. Board layout is the main implementation constraint. High-speed differential pairs require controlled impedance, uninterrupted reference planes, minimal layer transitions, and careful separation from clock and switching-node energy. Thermal design must also accommodate the typical 1.5 W device dissipation while maintaining adequate spreader and via access beneath the BGA. This page consolidates the confirmed lane, port, signaling, package, power, and environmental characteristics into an engineering-oriented view of the PEX8612-BB50RBCF. It also distinguishes the available ordering variants and explains the practical checks required before treating one as a replacement for another.

Permintaan RFG Kontak
PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch
PEX8616-BB50RBCF

PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch

The Broadcom PEX8616-BB50RBCF is a PCI Express Gen 2 switch IC with 16 lanes, four ports, 5.0 GT/s signaling, and 324 terminals in a 19 mm by 19 mm FCBGA package. It expands a PCI Express host interface into multiple downstream links for systems requiring more endpoint connectivity than a root complex can provide directly. A PCI Express switch is a multiport interface IC that routes high-speed serial transactions between a root complex, endpoints, and other switches. It sits within the PCI Express hierarchy between a host or fabric and downstream devices, adding fanout, peer-to-peer routing, and configurable traffic management while preserving the layered PCIe protocol structure. The BB silicon revision supports four PCIe Gen 2 ports and an aggregate configuration of 16 lanes. Signaling at 5.0 GT/s provides a nominal 500 MB/s payload bandwidth per direction on each Gen 2 lane. The 324-FCBGA package places the high-speed, power, ground, and auxiliary interfaces on a dense square land pattern that requires multilayer PCB construction and careful signal-integrity design. The Broadcom PEX 8616 data book covers AA, AB, and BB silicon revisions, with production information centered on revision BB. Its documentation includes the ExpressLane architecture, configuration mechanisms, ordering information, electrical characteristics, reference designs, and application guidance needed to evaluate the switch in server, storage, accelerator, and embedded PCIe systems. Typical uses include expanding a PCIe root port into four downstream links, connecting storage controllers to a host processor, supporting accelerator or network cards in multi-device chassis, and building server backplane fabrics. Exact port configuration and lane allocation must satisfy the device's supported partitioning rules and the electrical requirements of the selected system architecture. PCB implementation is the main design consideration. A 324-ball FCBGA requires escape routing through inner layers, length matching for high-speed differential pairs, continuous reference planes, and careful power and ground distribution. Follow the Broadcom reference design for layer count, decoupling, connector geometry, trace widths, and via structures instead of deriving these details from general ball-grid-array practice. This product overview combines the verified device identity, architecture, package details, sourcing links, drop-in family options, and practical implementation guidance. It also organizes the most useful PEX8616-BB50RBCF datasheet, pinout, equivalent, replacement, comparison, and application information into a design-focused reference for PCI Express engineers.

Permintaan RFG Kontak
PEX8618-BA50BC - 16-Lane Gen 2 PCIe Switch | Broadcom
PEX8618-BA50BC

PEX8618-BA50BC - 16-Lane Gen 2 PCIe Switch | Broadcom

Broadcom PEX8618-BA50BC is a PCI Express switch IC with 16 lanes, 16 ports, and PCI Express Gen 2 operation, packaged in a 324-pin HSBGA measuring 19 x 19 mm. It is designed for systems that need a configurable PCIe switching fabric capable of supporting multiple downstream links while maintaining compatibility with earlier PCI Express generations. A PCIe switch is an interface IC that routes high-speed serial transactions between a host or upstream endpoint and multiple downstream devices or adapters. As part of the broader PCIe interface hierarchy, it performs link training, lane-width coordination, flow control, and transaction forwarding. This role places it between PCI Express endpoints and system fabric controllers, making it useful in servers, storage systems, embedded platforms, and expansion systems. The switch's principal characteristics include 16 PCIe lanes, 16 ports, and PCI Express Gen 2 operation. Each port supports auto-negotiation, lane reversal, and polarity reversal, improving deployment flexibility when board-routing constraints affect lane order or signal polarity. Broadcom also documents compliance with the PCI Express Base Specification 2.0 and backward compatibility with versions 1.1 and 1.0a. PEX8618-BA50BC is identified as obsolete, so its technical role is best understood through legacy PCI Express system designs rather than new product platforms. The 324-HSBGA package creates a substantial pin-count and layout challenge because high-speed differential routing, supply distribution, reference-clock connections, and auxiliary signals must be assigned across a fine-pitch BGA land pattern. Pin assignment and ball mapping should therefore be checked directly against the Broadcom pinout and reference design. Typical uses include multiport storage controllers, PCI Express expansion chassis, server backplanes, industrial computing systems, and test equipment that fans a host connection into several downstream links. In such systems, the switch can reduce the number of direct host interfaces required while preserving a consistent PCIe topology. Application suitability depends on lane budget, port configuration, reference-clock requirements, firmware support, thermal performance, and the availability of a supported board design. For new designs, confirm device lifecycle status, pin compatibility, and the exact package land pattern before committing the PCB. A replacement should be selected only after its ball map, lane assignments, power rails, reference clock, configuration interface, and firmware behavior have been compared with the original PEX8618 implementation. The same package outline alone is not sufficient to establish drop-in compatibility. This page consolidates the confirmed lane, port, generation, package, lifecycle, and interoperability characteristics of the PEX8618-BA50BC, then adds practical PCB considerations, legacy application guidance, and an explicit drop-in assessment. It also separates functional PCIe switching options from true pin-compatible replacements to help engineers avoid adopting a mechanically similar but electrically incompatible substitute.

Permintaan RFG Kontak
PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBCF

PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8624-BB50RBCF is a 24-lane, six-port PCI Express Gen 2 switch IC with a 5.0 GT/s data rate, supplied in a 324-ball FCBGA package measuring 19 mm by 19 mm. The device provides a high-bandwidth PCIe switching solution for systems that need to aggregate, route, or fan out multiple PCI Express links while preserving the electrical and logical behavior expected from a Gen 2 fabric. A PCI Express switch belongs to the interface-controller hierarchy and manages transaction routing between a root complex or upstream port and multiple downstream endpoints. Within the broader semiconductor category, the PEX8624 combines a PCIe switch fabric, port-level interface functions, configuration handling, reference-clock distribution, and power-management features in one high-ball-count package. This integration reduces the number of discrete interface devices required in complex embedded platforms. The most prominent operating characteristics are its 24 PCIe lanes, six ports, and PCIe Gen 2 data rate of 5.0 GT/s. The 324-ball FCBGA package supports dense high-speed routing on multilayer PCBs, while its commercial temperature grade targets equipment operating within commercial environmental limits. The part is categorized as a PCI bus controller and PCIe interface IC rather than a conventional analog switch or digital logic device. The PEX8624 architecture is intended for systems requiring more connectivity than a single root port can directly provide. Each supported link must comply with PCIe signal-integrity, reference-clock, configuration, reset, and power-sequencing requirements. Designers must preserve the High-Speed differential routing rules, provide suitable decoupling, and verify connector, cable, and endpoint compatibility across the complete system. Typical uses include industrial host systems, external storage controllers, test equipment, embedded computing platforms, and networked appliances that need multiple PCIe endpoints behind one host interface. Its 24-lane capacity is useful when several devices, such as NVMe controllers, Ethernet adapters, capture cards, or acceleration modules, share a chassis. Exact lane allocation and usable bandwidth depend on port configuration and the physical topology implemented on the motherboard. A critical design consideration is that the 19 mm by 19 mm FCBGA requires a dense multilayer board with short High-Speed traces, matched reference planes, and uninterrupted return paths. The layout should follow the Broadcom reference design and data book for ball assignment, reference-clock routing, power configuration, reset behavior, and connector pin mapping before schematic capture is finalized. This page combines the core device identity, package characteristics, application guidance, pricing workflow, and family-level replacement information into a practical engineering reference. It also identifies which electrical, timing, thermal, and pin-level details still require direct confirmation from the manufacturer data book before layout release or production qualification.

Permintaan RFG Kontak
PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBIF

PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8624-BB50RBIF is a 24-lane, six-port PCI Express Gen 2 switch operating at 5.0 GT/s, packaged in a 324-FCBGA square ball grid array measuring 19 x 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving the five-gigatransfers-per-second performance of a Gen 2 endpoint or host interface. A PCI Express switch is a multiport interface IC that connects one upstream host-facing port to multiple downstream ports. Within the PCI Express hierarchy, the PEX8624 belongs to the bridge and switch class of system interconnect devices. It routes ordered transaction layers between a root complex or another switch and attached endpoint devices, allowing storage, networking, accelerator, and capture cards to share a host PCIe slot. The device provides 24 PCI Express lanes, six switch ports, and a 5.0 GT/s data rate. Its 324-FCBGA package uses a square 19 x 19 mm outline and a fine-pitch ball-grid layout. The high pin count reflects the simultaneous assignment of lane transmitters and receivers, auxiliary signaling, reference-clock connections, power rails, control interfaces, and configuration pins required by a multiport PCIe switch. PEX8624-BB50RBIF is intended for Gen 2 designs rather than higher-speed Gen 3 or Gen 4 fabrics. At 5.0 GT/s, each lane carries one bit per transfer cycle before line coding and protocol overhead are considered. The six-port topology gives system architects a way to consolidate several PCIe endpoint connections behind a common upstream interface while maintaining deterministic peer-to-peer routing support. Typical uses include PCIe expansion systems, industrial data-acquisition chassis, high-bandwidth network appliances, external storage controllers, test and measurement platforms, and GPU or FPGA accelerator systems. In these applications, the switch can reduce host-controller scarcity and provide a structured path between multiple endpoint types without redesigning the mechanical enclosure around several discrete adapters. PCB implementation is the dominant engineering consideration. A 324-FCBGA device requires a fine-pitch land pattern, multilayer PCB construction, controlled impedance routing, solid reference planes, and careful power and ground-plane distribution. The differential PCIe pairs should be routed as length-matched transmission lines with minimal stubs and layer transitions, while the reference clock and PERST# sequencing require deliberate system-level planning. This page consolidates the confirmed lane count, port count, transfer rate, package outline, sourcing constraints, and practical implementation considerations for PEX8624-BB50RBIF. For a new layout, use the Broadcom PEX8624 datasheet and reference design to validate the complete ball map, power architecture, clock topology, connector assignments, and PCIe training sequence before releasing fabrication files.

Permintaan RFG Kontak
PEX8624-BB50RBIG - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBIG

PEX8624-BB50RBIG - 24-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8624-BB50RBIG is a PCI Express Gen 2 switch IC with 24 lanes, six ports, a 5.0 GT/s data rate, and a 324-ball FCBGA package measuring 19 mm by 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving a shared upstream connection. A PCI Express switch is an interface IC within the PCI Express interface-controller hierarchy. It adds multiple downstream ports to a host or embedded platform, allowing storage, networking, accelerator, and peripheral links to communicate through one PCIe uplink. The PEX8624 combines this multiport routing function with a 24-lane configuration suitable for servers, embedded platforms, test equipment, and data-acquisition systems. The device supports 24 PCIe lanes and six ports at the Gen 2 rate of 5.0 GT/s. Its 324-FCBGA package provides the interconnect density required for a high-port-count switching IC. The Broadcom product overview also identifies the PEX 8624 family as a 24-lane, six-port PCIe Gen 2 switch, making it appropriate for designs requiring simultaneous expansion of several high-speed peripheral connections. PEX8624-BB50RBIG belongs to the Broadcom ExpressLane PEX 8624 product family. Broadcom documents the AA, AB, and BB variants in a dedicated data book, while product listings identify the BB50RBI order code as a 324-FCBGA implementation. The “G” suffix distinguishes the listed ordering variant from related “F” and “C” suffix variants encountered within the same product family. Typical uses include server storage expansion, Ethernet and network-interface aggregation, industrial data-acquisition chassis, test-and-measurement systems, and embedded computing platforms. A 24-lane fabric can support multiple downstream devices while maintaining a structured PCIe topology. Port and lane allocation must follow the system design rather than treating all 24 lanes as a single endpoint connection. PCB implementation requires careful high-speed signal-integrity work. The manufacturer data book and reference-design material should govern layer stack-up, connector placement, decoupling, reference-plane continuity, and via transitions around the FCBGA device. Power delivery also requires validation under the switching and operating conditions of the intended system. This page organizes the documented switch configuration, order-code distinctions, package details, sourcing information, and practical replacement considerations. It also highlights the need to verify firmware, reference clock, auxiliary-power, port-routing, and platform-level PCIe requirements before approving a substitution.

Permintaan RFG Kontak
PEX8632-BB50RBCF - 32-Lane PCIe 2.0 Switch | Broadcom
PEX8632-BB50RBCF

PEX8632-BB50RBCF - 32-Lane PCIe 2.0 Switch | Broadcom

Broadcom PEX8632-BB50RBCF is a 32-lane, 12-port PCI Express Gen 2 switch packaged in a 676-ball FCBGA measuring 27 x 27 mm. It supports a 5.0 GT/s PCIe link rate and provides non-transparent bridging between a host-facing port and multiple PCIe endpoint devices. The device is designed to PCI Express Base Specification 2.0 while remaining backward compatible with revisions 1.1 and 1.0a. A PCI Express switch is a semiconductor that divides one upstream PCIe connection into several downstream links. It belongs to the interface-controller hierarchy, where PCIe fabric switches sit between a root complex or host bridge and endpoint devices. This fabric-switch role reduces the number of host PCI Express ports required in servers, industrial computers, storage systems, and embedded platforms. The PEX8632 provides 32 PCIe lanes across 12 ports, providing substantial downstream bandwidth for storage controllers, network adapters, accelerators, and endpoint devices. Its 5.0 GT/s Gen 2 performance rate matches the throughput per lane defined for that generation of PCI Express. The manufacturer datasheet also identifies auto-negotiation, lane reversal, and polarity reversal support, which help simplify system integration where link training behavior must be adapted to the connected equipment. Internally, the device is organized as a PCI Express fabric switch with programmable multiport configurations. The exact number of logical ports available in a particular system depends on the operating mode and firmware configuration described in the design documentation. This makes the PEX8632 useful for systems that need flexible PCIe routing rather than a simple fixed one-to-one repeater. The 676-FCBGA package also provides a high pin count for power delivery, high-speed differential pairs, configuration interfaces, and auxiliary signals. Typical deployments include server backplane aggregation, multi-disk storage enclosures, industrial PCIe expansion systems, test and measurement platforms, and embedded chassis that must distribute PCIe traffic among several cards. A 12-port fabric is particularly appropriate when a single host adapter must reach multiple downstream endpoint types without introducing another switch tier. Layout and power design are critical because a Gen 2 switch exposes numerous simultaneous high-speed links in a relatively small 27 x 27 mm package. Follow the manufacturer reference design for ball assignment, layer stack-up, high-speed return paths, and power-plane distribution. Keep supply decoupling close to the device and confirm that every power rail meets its specified voltage, tolerance, and sequencing requirements before enabling the system. This page consolidates the device's lane count, port count, PCIe generation, package information, interoperability features, and sourcing context into one engineering reference. It also documents replacement constraints, verified drop-in candidates, and practical integration considerations that are not presented together on a typical distributor listing.

Permintaan RFG Kontak
PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom
PEX8636-AA50RBCG

PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8636-AA50RBCG is a PCI Express switch IC configured as a 36-lane, 24-port PCI Express Gen 2 multi-root switch with a stated data rate of 5.0 GT/s per lane. The device is supplied in a 1156-FCBGA package measuring 35 mm by 35 mm and is packaged in trays for board-level integration. Its ExpressLane architecture is intended to fan out multiple PCI Express links among host processors, endpoint devices, storage controllers, and network adapters. A PCI Express switch is a semiconductor device that routes PCI Express transaction and data traffic between multiple downstream ports and an upstream host-facing port. Within the PCI Express hierarchy, the switch sits between a root complex and endpoint devices. The PEX8636-AA family provides multi-root switching for systems that need to divide expansion traffic among several logical domains while maintaining a shared PCI Express fabric. Principal characteristics include support for 36 PCI Express lanes, 24 ports, and PCI Express Gen 2 operation at 5.0 GT/s. The 1156-FCBGA package provides the dense interconnect required for a high-port-count switching device, while the large 35 mm by 35 mm body supports controlled escape routing on multilayer PCBs. Listed product information identifies tray packaging, a moisture sensitivity level of 4 with a 72-hour floor-life condition, and export control classification number 5A991B1. The switching architecture allows a platform to consolidate several downstream links behind an upstream link, reducing the need for separate fabric-switch silicon when deterministic lane routing and centralized management are required. Fanout designs can improve resource organization in servers, storage appliances, industrial controllers, and multi-host systems, provided that the system topology remains within the electrical and protocol constraints defined for the device. Thermal design is a central implementation consideration because a 1156-ball FCBGA concentrates high-speed and power-management functions into a compact area. The PCB should provide the reference stack-up, via density, decoupling, and copper area prescribed by the Broadcom ExpressLane PEX 8636-AA Data Book. Signal-integrity validation should include the intended lane rates, loss budget, connector and retimer transitions, and the full end-to-end channel. Typical uses include server storage backplanes, PCI Express expansion chassis, multi-root computing platforms, industrial data-acquisition systems, and test equipment that distributes links among several instruments or accelerators. Application selection must verify port mapping, lane-width sharing, firmware support, reference-clock architecture, and the precise Broadcom ordering code before schematic capture.

Permintaan RFG Kontak
PEX8648-BB50RBCF - 48-Lane 12-Port PCIe Gen 2 Switch | Broadcom
PEX8648-BB50RBCF

PEX8648-BB50RBCF - 48-Lane 12-Port PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8648-BB50RBCF is a 48-lane, 12-port PCI Express Gen 2 switch operating at 5.0 GT/s and packaged in a 676-FCBGA (27 x 27 mm) package. It is designed for systems that require multiple PCI Express links to be consolidated, switched, and routed among host, accelerator, storage, networking, or embedded endpoints. The device belongs to the ExpressLane PEX 8648 family of PCI Express fabric switches. A PCI Express switch is an interface IC that creates a switched PCI Express fabric beneath a host complex or another PCI Express switch. Within the broader semiconductor hierarchy, it is an interface controller, then a PCI Express interface IC, then a semiconductor. The PEX8648 supports the PCI Express Gen 2 signaling rate of 5.0 GT/s and provides 48 lanes across 12 ports, making it suitable for complex server, accelerator, storage, and network-equipment architectures. The principal documented characteristics are 48 PCI Express lanes, 12 ports, a 5.0 GT/s per-lane data rate, and a 676-FCBGA package measuring 27 x 27 mm. The manufacturer data book identifies the PEX8648 family as a 48-lane, 12-port PCI Express Gen 2 switch. Its high lane count allows multiple downstream devices or additional switch tiers to share an upstream connection while preserving individual PCIe links. The BB silicon revision and RB ordering designation place the part within the PEX 8648 BB product family. The manufacturer documentation covers the PEX8648 AA, AB, and BB devices and includes production information for silicon revision BB. Because this is a dense, high-speed interconnect device, correct ball assignment, power delivery, reference-clock implementation, and signal-integrity layout are more important than a conventional low-power analog layout. Typical applications include PCI Express fabric expansion in industrial servers, accelerator aggregation in compute systems, high-bandwidth storage controllers, Ethernet and networking appliances, and embedded systems that connect several PCIe endpoints to a host controller. The 12-port topology can also support hierarchical fabrics in which downstream switches expand the number of available endpoints. PCB design should follow the manufacturer’s ball-out, reference design, power-plane, decoupling, and high-speed routing guidance exactly. A 676-ball FCBGA demands careful via-in-pad or microvia strategy, adequate layer-transition planning, and controlled impedance for every PCI Express lane. Use the pin-description and ball-assignment tables in the Broadcom data book when assigning PCB tracks. This page combines the documented PEX8648 family specifications, sourcing information for the exact ordering code, engineering application guidance, and a constraint-based comparison of available same-family ordering variants. It is intended to help hardware engineers qualify the correct Broadcom ordering code without confusing package, lifecycle, or configuration differences with genuine drop-in replacements.

Permintaan RFG Kontak
PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom
PEX8648-BB50RBCG

PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom

The Broadcom PEX8648-BB50RBCG is a 48-lane, 12-port PCI Express Gen 2 switch integrated circuit in a 676-ball FCBGA package measuring 27 mm by 27 mm. It operates at 5.0 GT/s per lane and is designed to fan out multiple PCI Express links for systems requiring increased endpoint connectivity, expanded storage capability, or dedicated downstream traffic paths. A PCI Express switch is a multiport semiconductor that routes PCI Express transaction, data, and control traffic between a host or upstream port and multiple downstream endpoints. Within the PCIe hierarchy, this device belongs to the switching and interface-device category, where lane multiplexing allows a constrained host interface to serve numerous peripherals without assigning a dedicated root port to each one. The principal specifications are 48 PCIe lanes, 12 ports, a 5.0 GT/s PCIe Gen 2 data rate, and a 676-FCBGA package with a 27 mm by 27 mm body. The reported RoHS status supports use in modern electronics manufacturing, while the Broadcom technical document covers the AA, AB, and BB silicon revisions of the PEX 8648 family. Exact electrical limits, reference clocking, power domains, and operating-temperature details should be selected from the manufacturer data book. The PEX 8648 architecture is suited to consolidating PCI Express connectivity in embedded computers, industrial controllers, network appliances, storage systems, and test equipment. Forty-eight lanes provide substantial downstream bandwidth at 5.0 GT/s per lane, while 12 ports allow more endpoint fan-out than a conventional root-complex-only design. Designers should preserve the exact reference-design ball assignments, power architecture, and connector requirements when translating the device into a PCB layout. This page distinguishes the ordering code, package, lane count, port count, and PCIe generation from superficially similar Broadcom variants. It also organizes replacement guidance around genuine FCBGA-676 pin-compatible options rather than functional PCIe switches that require a different footprint. Compatibility must include the correct ball map, lane assignments, clocking, auxiliary power, and system firmware configuration. For new layouts, follow the Broadcom PEX 8648 data book for differential routing, reference-plane transitions, power distribution, decoupling, reset behavior, and connector reach-through. A small BGA with hundreds of signal balls requires disciplined escape routing and through-hole vias beneath the device where the package design permits them. Confirm the exact ordering code before releasing a long-lead procurement order. The information here synthesizes the confirmed 48-lane, 12-port, 5.0 GT/s architecture with package-level replacement analysis and implementation guidance. It helps engineers distinguish orderable suffixes, assess board-level reuse, and identify the electrical and mechanical checks required before treating a candidate as a true drop-in replacement.

Permintaan RFG Kontak
PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom
PEX8648-BB50RBIG

PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom

Broadcom PEX8648-BB50RBIG is a PCI Express Gen2 switch IC built around a 48-lane, 12-port ExpressLane architecture, with a stated link rate of 5.0 GT/s and a 676-ball FCBGA package measuring 27 x 27 mm. It is intended for systems that need to fan out multiple PCI Express links while maintaining a common switching fabric. A PCI Express switch is a semiconductor device that creates multiple PCIe links from an upstream host connection. It belongs to the PCI Express interface-controller family, alongside host bridges, endpoint controllers and fabric switches. By placing a switch between a root complex and downstream devices, a system can support concurrent expansion traffic, peer-to-peer routing and more complex PCI Express topologies than a direct point-to-point connection permits. The confirmed PEX8648 family characteristics include support for 48 lanes across 12 ports, PCIe Gen2 operation at 5.0 GT/s, and the 676-FCBGA package identified for the BB50 variants. These specifications make the device suitable for high-bandwidth platform designs requiring numerous downstream links. Its scale is particularly relevant to storage systems, advanced networking appliances, embedded computing platforms and test systems that must aggregate several PCIe devices. The PEX8648 data book describes the BB silicon revision and its detailed technical specifications. A 27 x 27 mm FCBGA package provides a dense mounting solution for multilayer boards, but it also requires careful escape routing, plane management, power delivery and thermal design. Because the package contains 676 balls, board designers should preserve the manufacturer's land pattern, ball assignment and reference design rather than treating the package as a generic square BGA. Typical deployments place one or more PCIe switches behind a host controller or another fabric switch. In a server or storage controller, the switch can connect NVMe-capable devices, host buses and management interfaces. In an industrial or networking appliance, it can organize multiple endpoint controllers behind a shared upstream link. The primary engineering trade-off is that PCIe switching adds board area, power, configuration requirements and signal-integrity complexity in exchange for topology flexibility and aggregate throughput. Power delivery must account for both the main supply rails and the auxiliary rails used by the reference architecture. Layer-stackup selection, connector and retimer placement, and the separation of high-speed and power paths should follow the Broadcom reference material. For a 27 x 27 mm BGA, inspection and assembly processes should also be coordinated with the board fabricator because fine-pitch ball alignment can materially affect yield. This page combines the verified 48-lane, 12-port, 5.0 GT/s and FCBGA-676 characteristics with practical routing, power, thermal and replacement guidance. The alternatives table focuses on same-package PEX8648 orderable variants, while the application sections explain how the switch architecture changes board-level design decisions.

Permintaan RFG Kontak
PEX8649-AA50RBCG - 48-Lane PCI Express Gen 2 Switch | Broadcom
PEX8649-AA50RBCG

PEX8649-AA50RBCG - 48-Lane PCI Express Gen 2 Switch | Broadcom

Broadcom PEX8649-AA50RBCG is a PCI Express Gen 2 multi-root switch with 48 lanes, 12 ports, and a 676-FCBGA package measuring 27 mm by 27 mm. It supports PCIe operation at 5 GT/s and is designed for systems that need to fan out multiple PCI Express links from a host or root complex. A PCI Express switch is a semiconductor that manages point-to-point serial links between a host, endpoints, and downstream switches. The PEX8649 belongs to the broader PCI Express interface hierarchy, where lane count, port count, link speed, routing capability, and package compatibility determine whether it can satisfy a board architecture. A multi-root configuration can also provide controlled paths between independent root complexes rather than relying on a single-tree topology. The PEX8649-AA50RBCG provides 48 PCIe lanes across 12 ports, with PCIe Gen 2 operation at 5 GT/s. Its multi-root switch architecture is appropriate for high-performance computing, server expansion, accelerator systems, storage fabrics, and test equipment that require multiple PCIe links. The device can consolidate several downstream links behind a common switching component, reducing board-routing complexity while preserving independent lane resources. Broadcom ExpressLane PEX8649 devices use a high-speed, low-power serial interface architecture intended for reliable point-to-point communication. Because the PEX8649 is a large fine-pitch BGA device, correct ball assignment, multilayer routing, reference-clock distribution, power-delivery design, and signal-integrity verification are central to successful implementation. Differential pairs should be routed as short, continuous 100-ohm differential channels with appropriate return-path continuity. Typical applications include accelerator chassis, high-density storage systems, embedded computing platforms, industrial servers, network appliances, and PCI Express test equipment. In these systems, the switch can provide multiple downstream endpoints with lane-sharing or bifurcation arrangements where the board design and firmware configuration permit them. The 12-port topology is especially useful where numerous discrete PCIe functions must be integrated behind a common host-facing link. Power delivery and thermal design require particular attention because a 676-ball FCBGA contains many high-speed I/O and power connections. Follow the Broadcom PEX8649 data book for the complete ball map, reference circuitry, layout constraints, and power-management sequence. PCB design should preserve the specified impedance, isolation, clock routing, and decoupling topology rather than relying on generic BGA-layout assumptions. This product page combines the manufacturer data-book information with practical procurement, comparison, and design guidance. It also distinguishes documented pin compatibility from broader functional similarity, helping engineers evaluate whether a candidate can actually replace the PEX8649-AA50RBCG without changing the PCB footprint or redesigning the surrounding system.

Permintaan RFG Kontak
PEX8680-AA50RBCF - 80-Lane PCIe Gen 2 Switch | Broadcom
PEX8680-AA50RBCF

PEX8680-AA50RBCF - 80-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8680-AA50RBCF is an 80-lane, 20-port PCI Express Gen 2 switch IC operating at 5.0 GT/s, housed in a 1156-FCBGA package measuring 35 x 35 mm. The device is designed for high-speed computing systems that require centralized PCIe connectivity, traffic routing, and expansion-card management. A PCI Express switch is a semiconductor device that connects a host or upstream PCIe interface to multiple downstream endpoints. It belongs to the hierarchy of PCI Express interface ICs, bus controllers, interface semiconductors, and general-purpose integrated circuits. By distributing PCIe traffic across numerous lanes and ports, the PEX8680 class reduces system-routing complexity while preserving the protocol behavior required by modern servers, storage systems, and accelerator platforms. Principal characteristics include support for 80 PCIe lanes, 20 ports, and a 5.0 GT/s generation-2 data rate. The square HBGA/FCBGA package uses ball terminals, while the documented minimum operating temperature is 0°C. These specifications place the device in the class of high-density switching silicon intended for complex computing platforms rather than small embedded or consumer systems. The switch fabric provides multiple downstream connections from a common PCIe infrastructure. Lane sharing, device routing, and downstream-port coordination are important benefits when systems include numerous storage controllers, network interfaces, accelerators, or expansion cards. Its 1156-terminal package also requires a correspondingly dense PCB footprint, careful escape routing, and high-speed signal-integrity management to preserve performance across the PCIe Gen 2 interface. Typical applications include server backplanes, external storage appliances, accelerator systems, network-attached storage, high-end workstation platforms, and test equipment that emulates multiple PCIe endpoint connections. In each case, the switch can consolidate endpoint traffic behind one upstream link, reducing the number of discrete host-to-device routing paths while supporting the 20-port topology. A primary design consideration is that the 1156-FCBGA package is electrically and physically demanding. Board designers must use the manufacturer-recommended land pattern, ball assignments, reference design, and high-speed layout guidance. Thermal performance also depends on multilayer PCB construction, via arrays, power delivery, and heat spreading around the switch. This product record combines the documented PCIe configuration and package details with a focused engineering assessment of alternatives, comparison parameters, and implementation considerations. It helps designers evaluate whether the PEX8680-AA50RBCF architecture and footprint align with an existing high-speed computing platform before beginning detailed signal-integrity and power-distribution work.

Permintaan RFG Kontak
PEX8680-AA50RBCG - 80-Lane PCIe Gen 2 Switch | Broadcom
PEX8680-AA50RBCG

PEX8680-AA50RBCG - 80-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8680-AA50RBCG is an 80-lane, 20-port PCI Express Gen 2 switch operating at 5.0 GT/s and packaged in a 1156-FCBGA package measuring 35 x 35 mm. The device is designed to route PCI Express traffic between multiple endpoints and a host-facing interface in complex computing systems. Its tray packaging and MSL 4 rating support controlled handling and surface-mount assembly. A PCI Express switch is a high-speed interface controller that expands a limited set of PCIe links into multiple independently connected downstream ports. It belongs to the PCI Express interface-controller hierarchy and enables systems such as servers, storage appliances, embedded platforms, and industrial computers to consolidate high-bandwidth peripherals behind a common switch fabric. The PEX8680 supports Gen 2 operation at 5.0 GT/s, providing a defined pathway for compatible PCI Express devices and downstream card resources. The headline configuration is 80 PCI Express lanes distributed across 20 ports. This broad channel count makes the switch suitable for systems that must aggregate multiple controllers, accelerators, network interfaces, or storage paths. Configuration flexibility is identified in the product documentation, while the 1156-ball FCBGA package provides the dense interconnect required for a switch containing many high-speed differential lanes. The PEX8680 belongs to Broadcom's PCI Express switching product family and operates as an interface IC rather than a processor, memory device, or analog switch. Its Gen 2 architecture and 80-lane capacity distinguish it from lower-lane-count PCIe switches. The 1156-FCBGA footprint is a demanding ball-grid array, so successful implementation depends on high-density PCB construction, controlled impedance routing, appropriate layer-count design, and careful power-delivery planning. Typical uses include compact servers, converged systems, external storage enclosures, industrial controllers, test equipment, and networked appliances that require more PCIe endpoint connectivity than a root complex can provide directly. The switch can also be used to create segmented PCIe fabrics when downstream ports require isolation, switching, or coordinated routing between multiple device types. Designers should use the pin-description and reference-design information in the Broadcom datasheet when assigning every ball, supplying auxiliary rails, configuring the switch, and implementing high-speed differential routing. A 35 x 35 mm FCBGA requires careful escape routing and multilayer interconnects. Power and thermal planning should account for the switching activity of 80 lanes rather than treating the device as a low-power interface controller. This product summary consolidates the verified lane count, port count, signaling rate, package dimensions, packaging method, moisture-sensitivity classification, and practical implementation concerns into an engineering-focused reference. It also distinguishes the G ordering code from the closely related F ordering code while avoiding unsupported assumptions about functions that require confirmation in the manufacturer documentation.

Permintaan RFG Kontak
PEX8696-AA50RBCF - 96-Lane PCIe 2.0 Switch | Broadcom
PEX8696-AA50RBCF

PEX8696-AA50RBCF - 96-Lane PCIe 2.0 Switch | Broadcom

The Broadcom PEX8696-AA50RBCF is a PCI Express Gen 2 switch IC with 96 lanes, 24 ports, and a 5.0 GT/s signaling rate, housed in a 1156-ball 35 x 35 mm fine-pitch ceramic ball grid array package. It is designed to fan out a PCI Express system into multiple downstream links while supporting modern server, storage, and embedded system architectures. A PCI Express switch is a semiconductor device that expands one upstream PCI Express interface into multiple downstream ports. It belongs to the PCI Express interface IC hierarchy, where system I/O connectivity, protocol translation, lane routing, and downstream-device arbitration are handled by dedicated switching silicon. Such devices reduce the number of host-controller connections required in multi-lane systems. The PEX8696 provides 96 aggregate PCI Express lanes across 24 ports and supports PCI Express Gen 2 operation at 5.0 GT/s per lane. Its large 1156-FCBGA package provides the interconnect density required for a switch of this scale. The device is identified as a commercial-temperature, square, ball-grid-array PCI bus controller. Broadcom's reliability documentation associates the PEX8696-AA50RBC family with TSMC's 90 nm Low-K process technology and a 35 x 35 mm lead-free solder-bump HFC-BGA package. These package and process details are important for high-speed systems because controlled escape routing, low inductance, manufacturing compatibility, and board-level signal integrity determine whether the theoretical PCIe link rate can be sustained in practice. Typical applications include server storage fabrics, PCI Express expansion systems, host-to-card switching, embedded computing platforms, and industrial data-acquisition systems. A 24-port switch is especially useful where many peripherals must share a limited set of host interfaces without introducing a separate root complex for every endpoint. Board implementation requires careful attention to controlled-impedance routing, lossless or lightly lossy PCB materials, power delivery, and connector and via placement. Keep high-speed differential routes short and avoid unnecessary stubs. Refer to the Broadcom reference design and pin-description material for the exact ball assignments, reference clock connections, supply rails, and configuration requirements before fabrication. This page combines Broadcom device specifications, package characteristics, lifecycle considerations, and same-footprint replacement guidance with practical PCB and signal-integrity notes. It is intended to help system architects and hardware engineers determine whether the 96-lane, 24-port PCIe Gen 2 switch matches their expansion, routing, and manufacturability requirements.

Permintaan RFG Kontak
PEX8712-CA80BC - 12-Lane PCIe Gen 3 Switch | Broadcom
PEX8712-CA80BC

PEX8712-CA80BC - 12-Lane PCIe Gen 3 Switch | Broadcom

The Broadcom PEX8712-CA80BC is a PCI Express switch integrated circuit designed for 12-lane, 3-port PCIe Gen 3 systems. It is identified in the product listings as a special-purpose interface or PCI Express switch IC and uses a 324-pin FCBGA package measuring 19 x 19 mm. Broadcom describes the PEX 8712 as an ExpressLane PCIe Gen 3 switch developed on 40 nm technology, with multi-host switching capability for connecting multiple hosts to their respective endpoints. A PCIe switch is an interface IC that sits between a host or root complex and multiple PCIe endpoints. It provides fan-out, non-blocking interconnection, and centralized switching for systems such as servers, storage equipment, communications platforms, and graphics systems. The PEX8712-CA80BC is intended for designs that require a wider PCIe lane count and multiple downstream connections while maintaining Gen 3 PCIe operation. The verified product information identifies the device as a 12-lane, 3-port PCI Express Gen 3 switch. The Broadcom product page also specifies a typical power of 3.5 W and identifies the integrated package as a 19 x 19 mm, 324-pin FCBGA. These characteristics make the device suitable for board-level infrastructure where a compact, high-density switch implementation is required. The target orderable designation PEX8712-CA80BC is associated with the Broadcom PEX 8712 family. The listings use the related notation PEX8712-CA80BC-G, while the requested product identifier is PEX8712-CA80BC. Package details, electrical limits, thermal resistance, reference clock requirements, lane-specific performance, and the complete pin assignment require confirmation from the manufacturer datasheet before schematic release. Typical implementation involves routing the host-facing PCIe lanes, endpoint-facing lanes, auxiliary power, reference clock, control signals, and configuration interfaces through a dense multilayer PCB. Because the device is supplied in an FCBGA package, careful escape routing, via-in-pad or microvia strategy, reference-plane continuity, power delivery, and thermal management are essential. The 3.5 W typical power figure also makes power budget and junction-temperature calculations a central part of system validation. For new designs, verify the exact ordering code, package ball map, electrical characteristics, firmware requirements, reference design, and supported platform configuration with Broadcom. For replacement evaluation, use the manufacturer cross-reference process or the Request a Quote form on this page to confirm availability and technical suitability rather than assuming that a different PCIe switch is pin-compatible.

Permintaan RFG Kontak
PEX8747-CA80FBCG - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom
PEX8747-CA80FBCG

PEX8747-CA80FBCG - 48-Lane 5-Port PCIe Gen 3 Switch | Broadcom

The Broadcom PEX8747-CA80FBCG is a 48-lane, 5-port PCI Express Gen 3 switch with multi-host switching capability, operating at 8.0 GT/s per lane and manufactured on a 40 nm process. It is offered in a 575-ball BGA surface-mount package and is designed for high-bandwidth, non-blocking interconnect between host systems and graphics or accelerator endpoints. A PCI Express switch is a semiconductor device that functions as a multi-port bridge within a PCIe hierarchy. It belongs to the PCI Express interface controller family, which sits between computer buses and peripheral devices. By providing multiple downstream ports, a PCIe switch can expand one host interface into several endpoint connections without requiring a separate host bridge for every downstream device. The PEX8747 is specifically optimized for scalable multi-host and high-resolution graphics traffic. The device provides 48 PCIe lanes across five ports and supports PCIe Gen 3 operation at 8.0 GT/s. Its architecture is intended to preserve non-blocking data movement, support peer-to-peer transfers and multicast traffic, and connect hosts with their associated endpoints. The 40 nm process implementation and 575-ball BGA package support dense, high-speed server and workstation designs where routing margin and thermal performance are important layout constraints. Multi-host capability is the principal differentiator of this switch family. A single PEX8747 can organize several host-to-endpoint paths, making it suitable for platforms that combine graphics, computation, or storage-oriented endpoint devices. Its lane and port organization must be matched carefully to the system topology because the number of lanes assigned to each downstream port determines the bandwidth available to that endpoint. The PEX8747 is appropriate for server enclosures, multi-GPU systems, high-end graphics platforms, and other equipment requiring a scalable PCIe fabric. Compared with a simple endpoint device or a one-port bridge, the PEX8747 consolidates switching, lane management, and multi-host routing into a single integrated component. Layout is the main practical challenge for this package. Differential high-speed pairs, reference clocks, auxiliary power rails, and ground-return paths must be routed according to the manufacturer's reference design. Keep the switch's thermal vias and power-distribution network within the layout constraints specified for the 575-ball BGA, and validate complete channel designs with the manufacturer's signal-integrity and power-integrity tools. This page combines the confirmed PEX 8747 product characteristics, package information, application guidance, and a strict review of available drop-in alternatives. It also documents where a PCB or platform redesign is required instead of implying that functionally similar PCIe devices are pin-compatible replacements.

Permintaan RFG Kontak
PEX88096B0-DB - 96-Lane PCIe 4.0 Switch | Broadcom | Storage
PEX88096B0-DB

PEX88096B0-DB - 96-Lane PCIe 4.0 Switch | Broadcom | Storage

The Broadcom PEX88096B0-DB is a 96-lane PCI Express 4.0 managed switch from the PEX88000 series, delivered in a 1550-ball BGA package (37.5 x 42.5 mm) optimized for high-density storage and fabric applications. It provides 48 downstream ports and supports up to 98 solid-state drives through fan-out switching, while operating at the full PCIe 4.0 data rate of 16 GT/s per lane. A PCI Express (PCIe) switch is a high-speed serial fabric device that expands a single root-complex link into many endpoint links, enabling fan-out topologies in servers, storage arrays, and accelerator platforms. PCIe 4.0 is the fourth generation of the PCI Express standard, doubling the per-lane bandwidth of PCIe 3.0 to 16 GT/s. As a managed switch, the PEX88096 supports advanced features such as hot-plug, surprise-down recovery, dynamic port bifurcation, and Spread Spectrum Clocking (SSC) isolation, which are essential for enterprise storage and NVMe deployments. Key features include 96 total PCIe 4.0 lanes with 48 configurable downstream ports, integrated DMA and I/O virtualization support, hot-plug capability on every port, advanced error reporting (AER), and Broadcom's proprietary chip-link diagnostics. The device supports bifurcation configurations such as x4, x8, x16 per port and provides per-port signal-integrity tuning for reliable operation across long backplane traces. The 1550-ball BGA exposes a wide SERDES and sideband I/O complement suitable for adapter cards, backplanes, and custom ASIC/FPGA co-designs. Architecturally, the PEX88096B0 uses a non-blocking cut-through switching fabric with per-port credit-based flow control, multi-queue VC support, and a 32-bit MCU management interface. It is firmware-compatible with the broader PEX88000 family (including the PEX88064, PEX88080, and PEX88128), allowing OEMs to scale port count and lane count on a single software platform. Typical applications include NVMe SSD JBOD enclosures with 96+ drives, composable disaggregated storage fabrics, GPU/CPU accelerator pooling backplanes, hyperscale data-center storage tiers, and PCIe fan-out adapter cards. Both active and low-power standby states are exposed, making the device usable in dense thermal envelopes where chassis airflow is constrained. When designing with the PEX88096B0-DB, allocate at least six PCB layers with impedance-controlled 85 ohm differential SERDES routing, a dedicated reference clock distribution network with SSC support, and provide thermal management through the central heat-spreader pad. The on-chip microcontroller requires an external SPI flash for firmware boot.

USD $1.145,00 Diketersediaan
PEX90144 - 144-Lane PCIe Gen6 Switch | Broadcom | AI
PEX90144

PEX90144 - 144-Lane PCIe Gen6 Switch | Broadcom | AI

The Broadcom PEX90144 is a 144-lane PCI Express 6.0 packet switch built on a 5nm process, part of the Broadcom ExpressFabric PCIe switching family. It supports port widths of 2, 4, 8, or 16 lanes and delivers up to 256GB/s of bidirectional raw bandwidth per x16 port, with up to 9.2Tb/s of raw bandwidth achievable through the device in its largest configuration. A PCIe switch is a fabric device that expands a single root-complex PCI Express link into multiple downstream endpoints, aggregating GPU, NIC, storage controller, and accelerator traffic. In the system hierarchy, it sits between the host CPU root port and the endpoint tier, and is a core building block of modern data center interconnect fabrics alongside CPU PCIe controllers and retimers. Key differentiating features include hardware multi-host support for sharing the switch fabric across several hosts, an in-house Broadcom SerDes PHY exceeding 36dB of performance margin at Gen6 PAM-less NRZ data rates, and an embedded PCIe protocol analyzer for in-system debug without external interposer hardware. Turnkey fabric management software simplifies bring-up and topology configuration for large racks. Architecturally, the 5nm CMOS process integrates the SerDes, packet-routing fabric, and management engines on a single die, keeping per-lane power low while sustaining Gen6 64GT/s signaling. The device scales above its siblings, sitting as the widest device in Broadcom's published PCIe Gen6 switch lineup, which also includes 104-lane and 88-lane configurations. Typical applications include AI rack-scale connectivity between host CPUs and GPU accelerators, high-density server PCIe expansion chassis, composable and disaggregated infrastructure, and NVMe storage fabrics. It was publicly demonstrated integrated into a Dell PowerEdge XE7745-style PCIe board at SC25. Design consideration: at this bandwidth scale, signal-integrity planning for Gen6 64GT/s channels, substrate stack-up, and thermal design for the large BGA package are critical; consult the Broadcom PEX90000 series product brief for validated topologies. This page synthesizes distributor availability, family cross-references, and practical design guidance not found in the manufacturer datasheet.

Permintaan RFG Kontak
PGA206UA - 5MHz FET-Input Programmable Gain In-Amp | TI
PGA206UA

PGA206UA - 5MHz FET-Input Programmable Gain In-Amp | TI

The Texas Instruments PGA206UA is a high-speed digitally programmable gain instrumentation amplifier (PGA) delivering a 5 MHz bandwidth, 100 pA maximum FET-input bias current, and digitally selectable gains of 1, 2, 4, and 8 V/V in a 16-pin SOIC (SOL-16) surface-mount package. A programmable gain instrumentation amplifier is a precision differential amplifier whose closed-loop gain is set by digital control inputs rather than external resistors. It sits within the amplifier hierarchy as an instrumentation amplifier -> precision op amp -> analog front-end (AFE) -> signal chain IC, combining a true three-architectural-input instrumentation amplifier front end with internally switched gain networks. PGAs are essential in data acquisition systems where a single amplifier must handle sensor signals spanning several orders of magnitude without manual range switching. Key features include fast settling to 0.01% after a gain change, +/-40V input protection that survives overrange faults common in industrial field wiring, and a low maximum offset voltage of 1.5 mV. The FET input stage keeps bias current at 100 pA max, preserving accuracy with high-impedance sources such as pH probes, photodiodes, and piezoelectric sensors. Technically, the PGA206 uses internally switched precision resistor networks controlled by two digital gain-select lines, a scheme the datasheet notes pairs naturally with an external logic latch to acquire gain data from a high-speed digital bus. Slew rate is 25 V/us and the supply range is +/-4.5V to +/-18V, allowing operation from standard +/-5V, +/-12V, or +/-15V analog rails. Operation is specified from -40C to +85C. Typical applications include multi-range data acquisition front ends, programmable sensor interfaces, test and measurement instrumentation, and dynamic signal conditioning where gain must change on-the-fly between measurements. Design consideration: total response time after a gain change equals the switching time plus the settling time to the new output voltage, so budget for settling in high-throughput scanning systems. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
PGA207UA - 5MHz Programmable Gain Instrumentation Amp | TI
PGA207UA

PGA207UA - 5MHz Programmable Gain Instrumentation Amp | TI

The Texas Instruments PGA207UA is a high-speed digitally programmable gain instrumentation amplifier offering a 5 MHz bandwidth, 100 pA maximum FET-input bias current, and digitally selectable gains of 1, 2, 5, and 10 V/V, housed in a 16-pin SOIC (SOL-16) surface-mount package. A programmable gain instrumentation amplifier (PGIA) is a precision differential amplifier whose closed-loop gain is set digitally rather than by external resistors. In the signal-chain hierarchy it sits between sensors and data converters, combining the true instrumentation-amplifier input stage (high common-mode rejection, balanced high-impedance inputs) with gain-switching logic, so a single ADC channel can resolve signals spanning several orders of magnitude. Key features of the PGA207 include two CMOS/TTL-compatible address lines for gain selection, analog inputs internally protected against overloads up to +/-40V even with the supplies off, and laser-trimmed offset voltage for low drift. A fast 0.01% settling specification allows the gain to be switched between conversions in high-throughput data-acquisition systems without dead time. Architecturally, the device uses a three-amplifier instrumentation topology with FET input transistors, giving negligible input bias current (100 pA max) for high-source-impedance sensors, a 25 V/us slew rate, and 18 nV/sqrt(Hz) input noise with 75 dB CMRR. Laser trimming at the Burr-Brown production line holds offset voltage to 1.5 mV max, preserving accuracy at the lowest gains. Typical applications include programmable data-acquisition front ends, dynamic signal ranges from PT100 sensors and strain-gauge bridges, test and measurement instrumentation, and industrial process-control analog front ends feeding 12- to 16-bit ADCs. When designing, remember the gain lines are logic-level inputs: tie them to clean CMOS/TTL levels and route away from the input traces. The +/-40V input protection removes the need for external clamp diodes in most industrial environments. This page consolidates distributor pricing, drop-in family alternatives, and engineering design guidance not found in a single manufacturer datasheet page.

Permintaan RFG Kontak
PGA207UA/1K - 5MHz Programmable Gain In-Amp | Texas Instruments
PGA207UA/1K

PGA207UA/1K - 5MHz Programmable Gain In-Amp | Texas Instruments

The Texas Instruments PGA207UA/1K is a high-speed, digitally programmable gain instrumentation amplifier delivering gains of 1, 2, 5, and 10 V/V with a 5 MHz bandwidth, a FET input stage with 100 pA maximum bias current, and a 16-pin SOL-16 SOIC surface-mount package. A programmable gain instrumentation amplifier (PGIA) is a precision differential amplifier whose closed-loop gain is set digitally rather than by external resistors. Within the signal-chain hierarchy, it sits between raw transducers and ADCs as a front-end conditioning device, combining the high input impedance and CMRR of a true three-op-amp instrumentation amplifier with gain-switching logic that lets one device serve multiple transducer full-scale ranges. Key features of the PGA207UA/1K include digitally selectable gains (1, 2, 5, 10 V/V) via two CMOS/TTL-compatible address lines, fast settling to 0.01%, a FET input with maximum bias current of 100 pA, and internal input protection rated for plus/minus 40V overloads even with power supplies off. The device is laser-trimmed for low offset voltage (1.5 mV max) and low drift, eliminating manual calibration in most data acquisition designs. Technically, the PGA207 architecture uses a true instrumentation amplifier input stage whose gain is switched by the two digital address lines, so no external gain resistors are needed and gain accuracy is factory-determined. The 5 MHz bandwidth at higher gains supports multiplexed data acquisition channels, while the FET input minimizes loading on high-impedance sources such as photodiodes and piezoelectric sensors. Supply operation spans plus/minus 4.5V to plus/minus 18V, with a slew rate of approximately 25 V/us. Typical applications include multiplexed data acquisition front ends, programmable test and measurement signal conditioning, and industrial sensor interfaces where input channels of different amplitude must share one ADC. Fast settling allows channel-to-channel switching without long dead time, improving system throughput. Design consideration: ensure supply headroom within the plus/minus 4.5V to plus/minus 18V range and route the digital gain-select lines away from the high-impedance inputs to prevent digital noise coupling into the analog front end. This page synthesizes distributor pricing, drop-in family alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
PGA281 - Zero-Drift Programmable Gain Instrumentation Amplifier | TI
PGA281

PGA281 - Zero-Drift Programmable Gain Instrumentation Amplifier | TI

The PGA281 is a high-precision instrumentation amplifier from Texas Instruments featuring digitally-controllable gain and signal-integrity test capability. It uses proprietary autozeroing techniques to achieve low offset voltage, near-zero offset and gain drift, excellent linearity, and nearly no 1/f noise. The device is available in a 16-pin TSSOP package (PW) and operates over a wide supply range, making it suitable for precision sensor interfaces and data acquisition systems. An instrumentation amplifier (INA) is a type of differential amplifier that amplifies the difference between two input signals while rejecting common-mode voltages. It is characterized by high input impedance, high common-mode rejection ratio (CMRR), and low offset voltage. The PGA281 belongs to the family of programmable gain instrumentation amplifiers (PGIAs), which allow the gain to be set digitally or via external resistors, providing flexibility in signal conditioning chains. This category sits within the broader hierarchy of analog amplifiers, which are essential building blocks in electronic systems for signal conditioning and measurement. Key features of the PGA281 include gain programmable from G = 0.2 to 10,000 using an external resistor, fully differential outputs with integrated clamping, low offset voltage of 10 µV (typ) and 35 µV (max), low offset drift of 0.1 µV/°C (typ) and 0.3 µV/°C (max), and low input bias current of 5 pA (typ). These specifications make it ideal for high-accuracy applications where drift and noise are critical. The PGA281 employs a zero-drift architecture that continuously corrects offset and drift, achieving near-zero temperature coefficients. The integrated clamping circuitry protects the outputs from overvoltage conditions, enhancing system robustness. The device supports a wide supply range, typically ±5V, and provides rail-to-rail output swing, maximizing dynamic range. Typical applications include precision current sensing (10 µA to 100 mA), sensor signal conditioning for bridge sensors, thermocouple amplifiers, and data acquisition front-ends. Its low offset and drift make it suitable for medical instrumentation, industrial process control, and test and measurement equipment. When designing with the PGA281, ensure proper decoupling of the power supply pins and consider the thermal performance of the TSSOP package. The gain-setting resistor should be a precision resistor to maintain gain accuracy. The device's signal-integrity test capability allows for system-level diagnostics, which is valuable in safety-critical applications.

Permintaan RFG Kontak
PGA309AIPWR - Programmable Sensor Conditioner | TI | 16-TSSOP
PGA309AIPWR

PGA309AIPWR - Programmable Sensor Conditioner | TI | 16-TSSOP

The PGA309AIPWR from Texas Instruments is a voltage output programmable analog signal conditioner designed specifically for resistive bridge sensors. It integrates a precision analog signal path with digital calibration capabilities, enabling correction of zero, span, zero drift, span drift, and sensor linearization errors. Housed in a 16-pin TSSOP (PW) package, this device operates over a temperature range of -40°C to +125°C, making it suitable for industrial and automotive environments. A programmable sensor conditioner is an integrated circuit that amplifies and calibrates the small differential output of a bridge sensor, such as a strain gauge or pressure sensor, converting it into a linear, temperature-compensated voltage output. It sits between the sensor and the ADC or microcontroller, forming a complete sensor signal chain. This category falls under sensor interface ICs within the broader analog signal processing domain. Key features include a programmable gain amplifier (PGA) with adjustable gain, a digital-to-analog converter (DAC) for offset and span calibration, and an internal temperature sensor for drift compensation. The device supports a supply voltage up to 5.5V and provides a ratiometric or absolute voltage output. Its digital interface allows in-system calibration via a two-wire serial interface, simplifying production trimming. The PGA309 employs a chopper-stabilized amplifier architecture to achieve low offset and drift, ensuring high accuracy over temperature. The integrated calibration engine uses look-up tables to linearize the sensor response, reducing the need for external components. This architecture provides a complete, factory-calibrated solution that minimizes assembly cost and improves yield. Typical applications include industrial pressure transmitters, automotive manifold absolute pressure (MAP) sensors, and precision weigh scales. The device's wide temperature range and programmable features make it ideal for harsh environments where sensor accuracy is critical. When designing with the PGA309AIPWR, ensure proper decoupling of the supply pins and careful layout of the analog input traces to minimize noise. The calibration coefficients should be stored in an external EEPROM, as the device does not have non-volatile memory on-chip.

Permintaan RFG Kontak