Produk (44.000+)

STM32L063C8T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L063C8T6

STM32L063C8T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32L063C8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 64 KB of embedded Flash, 8 KB of SRAM, and USB 2.0 crystal-less connectivity in a 48-LQFP 7 x 7 mm package. It accepts a 1.65 V to 3.6 V supply voltage and supports operation from -40°C to +85°C, making it suited to compact, low-power embedded systems that need USB, moderate processing performance, and a conventional leaded surface-mount footprint. An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, standby operation, and wake-up transitions. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and combines a general-purpose CPU core with embedded Flash, SRAM, analog and digital peripherals, clock control, communications interfaces, and low-power management in one integrated device. Principal features include 64 KB of Flash organized as 64K x 8 bits, 8 KB of SRAM, and a 2 KB EEPROM indicated by the device specifications. The MCU provides a 32-bit Arm Cortex-M0+ core, a 12-bit ADC, USB 2.0 support, hardware AES capability, and LCD-oriented connectivity. These resources support compact USB-connected products while keeping the device useful for control, sensing, communications, and human-interface functions that do not require a higher-performance Cortex-M core. The 32 MHz Cortex-M0+ architecture provides a balance between processing throughput and low-power operation. Embedded Flash permits firmware and data to reside within the same package, while 8 KB of SRAM supports stack space, working variables, USB buffers, and peripheral data handling. The 1.65 V to 3.6 V operating range supports integration into 3.3 V systems, although designers should not infer that every external peripheral can safely operate from the lower end of the supply range without checking individual device requirements. Typical uses include industrial control modules, consumer accessories, motor-driver controllers, USB-connected sensing products, and OEM or EMS controller boards. The LQFP-48 package exposes more I/O than compact QFN alternatives and is easier to inspect or rework during prototype assembly. USB connectivity can simplify direct host or peripheral interfaces, while AES support is useful for devices handling protected control or communication data. The primary design consideration is careful power and signal planning around a 3.3 V low-power system. Keep decoupling close to supply pins, route high-current USB and motor outputs away from sensitive analog inputs, and use the manufacturer pin-description and application guidance when assigning the 48 package pins. Prototype designs also benefit from exposed test points for debugging, bootloader access, and brownout behavior. This product overview consolidates the manufacturer device description, distributor specifications, package information, sourcing constraints, replacement considerations, and practical integration guidance into a design-focused reference. It also highlights where engineers must verify pin assignments, electrical limits, and ordering information before releasing a PCB or changing the MCU in an existing design.

Permintaan RFG Kontak
STM32L063R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L063R8T6

STM32L063R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32L063R8T6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz and integrating 64 KB of Flash memory. The device is supplied in a 64-pin LQFP package measuring 10 x 10 mm and supports operation from 2.5 V to 3.3 V. Its connectivity features include USB 2.0 crystal-less operation, LCD support, and AES hardware acceleration. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile memory, peripherals, and communication interfaces into one package. The STM32L0 family belongs to the 32-bit embedded MCU hierarchy, combining ARM Cortex-M0+ processing with energy-conscious operation for compact, battery-powered equipment. The STM32L063R8T6 is particularly suited to designs that require USB connectivity, secure data handling, and a relatively large pin count in a familiar LQFP footprint. Key characteristics include a 32-bit Cortex-M0+ processor, a maximum clock frequency of 32 MHz, and 64 KB of Flash organized as 64K x 8 bits. USB 2.0 support includes crystal-less operation, which can simplify clock and peripheral design in USB-connected products. The integrated AES capability supports hardware-assisted encryption, while the LCD interface enables direct control of compatible display panels. The operating voltage range of 2.5 V to 3.3 V suits embedded systems designed around standard low-voltage rails. The STM32L063R8T6 combines a compact 10 x 10 mm LQFP package with a broad set of embedded peripherals. Its 64-pin package provides more I/O and mixed-signal connection options than smaller MCU packages, making it useful for products that need USB alongside control signals, communications, sensor inputs, or display support. The Cortex-M0+ architecture is designed for energy-efficient embedded processing rather than high-performance computing, allowing developers to balance responsive control with low standby and active power. Typical uses include low-power USB-connected data loggers, compact industrial sensing modules, secure access-control terminals, USB-to-serial equipment, battery-operated monitoring devices, and embedded control systems with LCD readouts. The USB interface is particularly valuable for configuration, firmware update, or data-transfer workflows. AES hardware acceleration can improve the efficiency of encrypted communication or storage routines, while the LCD controller reduces the need for external display-interface components. PCB design should account for the LQFP-64 footprint, exposed supply pins, decoupling requirements, and USB signal integrity. Place the USB differential pair as a controlled-impedance route with minimal stubs, provide local bulk and high-frequency decoupling near the device, and verify oscillator, reset, and programming interfaces against the manufacturer datasheet. The 10 x 10 mm package also requires adequate assembly clearance and thermal copper for repeatable production soldering. This product page combines manufacturer product information, distributor listings, application guidance, package identification, and engineering-oriented selection criteria. It also separates verified device characteristics from fields that require consultation of the manufacturer datasheet, helping designers evaluate the STM32L063R8T6 for USB, low-power, embedded-control, and security-assisted applications.

Permintaan RFG Kontak
STM32L071C8T6 - 32MHz Cortex-M0+ 64KB Ultra-Low-Power MCU | STMicroelectronics
STM32L071C8T6

STM32L071C8T6 - 32MHz Cortex-M0+ 64KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM32L071C8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating up to 32 MHz with 64 KB (64K x 8) Flash memory and 20 KB SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package. An ultra-low-power microcontroller (MCU) is a semiconductor that minimizes its own energy use so that a battery-operated product can run for months or years on a single cell. The STM32L0 access line from STMicroelectronics pairs a 32-bit Arm Cortex-M0+ core - the smallest and most energy-efficient member of the Arm Cortex-M family - with power-saving features such as low-power run and stop modes. In the wider hierarchy, this device sits as an embedded microcontroller inside the broader category of semiconductor components, used where deterministic real-time control and low standby current matter more than raw processing throughput. Key features of the STM32L071C8T6 include a 32 MHz maximum clock, 64 KB of embedded Flash for firmware storage, 20 KB of SRAM for working memory, and operation from a 2.5 V / 3.3 V supply. It belongs to STMicroelectronics' access line of STM32L0 devices, which targets cost-sensitive, low-power designs, and it is offered in a 48-LQFP package that is widely supported by standard PCB assembly and hand-soldering processes. Architecturally, the Cortex-M0+ core uses a Thumb-2 instruction set with an integrated Nested Vector Interrupt Controller for fast, low-latency interrupt handling, while the surrounding peripherals are engineered for low-power operation. Because the core and peripheral set are shared across the STM32L0 family, application code written for one STM32L0 member can often be migrated to another family member with minimal driver changes, which greatly reduces firmware maintenance effort across product variants. Typical applications include battery-operated sensor nodes and IoT endpoint devices, smart meters, industrial monitoring and control modules, low-power wireless sensor nodes, compact consumer accessories, and always-on battery-powered wearables where sleep-mode current dominates the total energy budget. When designing with this device, plan the decoupling network and clock source carefully: place the bulk and high-frequency bypass capacitors directly at the supply pins, keep the 32 MHz oscillator loop short on the PCB, and confirm that the regulator can support the required peak current when the core wakes from stop mode. The 48-LQFP footprint also makes the part easy to hand-probe and to route with 0.5 mm pitch fanout patterns. This page combines distributor channel listings, verified package and memory specifications, drop-in replacement analysis for the same 48-LQFP footprint, and practical design notes - information that is not consolidated in a single manufacturer datasheet.

Permintaan RFG Kontak
STM32L071CBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L071CBT6

STM32L071CBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STM32L071CBT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M0+ core. It operates at a maximum frequency of 32 MHz and features 128 KB of Flash memory and 20 KB of SRAM. The device is housed in a 48-pin LQFP package (7x7 mm) and is designed for a wide range of battery-powered and energy-efficient applications. An ultra-low-power microcontroller (MCU) is a type of integrated circuit that combines a processor core, memory, and peripherals on a single chip, optimized for minimal power consumption. The STM32L0 series is part of the broader STM32 family, which includes various ARM Cortex-M based MCUs. These devices are essential in embedded systems where energy efficiency is critical, such as IoT devices, wearables, and industrial sensors. The STM32L071CBT6 sits within the STM32L0 category, which is known for its low-power modes and high integration. Key features of the STM32L071CBT6 include multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop with RTC, Stop without RTC, Standby with RTC, Standby without RTC), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and a wide range of communication interfaces including I2C, SPI, USART, and LPUART. The device also integrates a USB 2.0 full-speed device controller, a real-time clock (RTC) with calendar, and a true random number generator (TRNG). The STM32L071CBT6 is built on STMicroelectronics' ultra-low-power technology, which enables a dynamic current consumption as low as 87 uA/MHz in Run mode and 0.4 uA in Standby mode with RTC. This makes it ideal for applications that require long battery life, such as smart meters, medical devices, and wireless sensor nodes. The device also supports a wide supply voltage range from 1.65V to 3.6V, allowing operation from a single coin cell battery. Typical applications include IoT edge nodes, portable medical devices, smart home sensors, and industrial monitoring systems. The rich set of analog peripherals and communication interfaces makes it a versatile choice for many embedded designs. When designing with the STM32L071CBT6, it is important to consider the power supply decoupling and the use of the low-power modes to maximize battery life. The device supports a flexible clocking scheme with an internal 16 MHz RC oscillator, an external crystal oscillator, and a PLL. Proper PCB layout with short, low-inductance traces for the crystal and decoupling capacitors is recommended for reliable operation.

Permintaan RFG Kontak
STM32L071CBT7 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071CBT7

STM32L071CBT7 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L071CBT7 is an ultra-low-power Arm Cortex-M0+ 32-bit microcontroller with a 32 MHz CPU, 128 KB of Flash memory, and a 48-LQFP 7 x 7 mm package. It belongs to STMicroelectronics' STM32L0 access-line family and is intended for compact, energy-conscious embedded products. The verified distributor data identifies the MCU as a 32-bit device with 128 KB organized as 128K x 8, while the manufacturer page describes the STM32L071xx family's 32 MHz Cortex-M0+ core. An ultra-low-power microcontroller is a semiconductor component optimized to complete embedded control tasks while minimizing energy consumption during active operation, standby, and wake-up transitions. The STM32L0 family sits within the broader hierarchy of microcontroller, embedded processor, embedded control IC, and power-conscious semiconductor. This positioning makes the STM32L071CBT7 suitable for products where battery life, compact size, deterministic control, and low system overhead matter more than maximum compute throughput. The verified data highlights three principal attributes: a 32 MHz Arm Cortex-M0+ processor, 128 KB of Flash memory, and a 48-LQFP 7 x 7 mm package. LCSC additionally identifies a 12-bit conversion feature and an operating temperature range of -40 C to +105 C. These details make the device a general-purpose embedded controller for low-power sensing, actuator control, portable equipment, and compact industrial modules. The exact RAM, peripheral, voltage, current, and package-pin details must be confirmed against the manufacturer datasheet before design release. The STM32L071CBT7 is intended for firmware that benefits from a familiar Arm Cortex-M ecosystem, efficient 32-bit instruction execution, and embedded Flash-resident program storage. Its 128 KB Flash capacity is larger than many minimal microcontrollers and can accommodate boot code, application logic, configuration tables, and protocol handlers. The 32 MHz clock provides useful processing headroom for sensor polling, digital filtering, user-interface state machines, and communication-stack tasks, although real-time performance remains dependent on peripherals and firmware configuration. Typical embedded uses include low-power environmental sensors, battery-operated portable instruments, compact motor or actuator controllers, connected sensing nodes, and industrial automation modules. In a sensor node, the MCU could acquire measurements, filter data, manage a low-power duty cycle, and store operating parameters. In an industrial module, it could coordinate inputs and outputs while supporting field-bus or serial communication. The package and exact peripheral complement should be selected against the mechanical drawing and pin definition. The primary design consideration is to validate every electrical and pin requirement from the official manufacturer datasheet before layout. Confirm the complete LQFP-48 pin map, supply limits, decoupling requirements, oscillator connections, I/O limits, and programming interface. For a new ultra-low-power design, calculate average current from the selected operating mode, peripheral load, wake-up rate, and measurement duty cycle rather than relying only on the maximum clock frequency. This page consolidates exact distributor and manufacturer facts, distinguishes verified data from missing parameters, and adds selection, sourcing, and design guidance. It also avoids presenting unverified pin mappings or cross-manufacturer drop-in claims as guaranteed replacements.

Permintaan RFG Kontak
STM32L071CZU6 - 32MHz Cortex-M0+ MCU | STMicroelectronics | Embedded
STM32L071CZU6

STM32L071CZU6 - 32MHz Cortex-M0+ MCU | STMicroelectronics | Embedded

The STMicroelectronics STM32L071CZU6 is an ultra-low-power, 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 192 KB of Flash memory, 20 KB of SRAM, and 6 KB of data EEPROM in a 48-pin UFQFPN package measuring 7 mm by 7 mm. The device combines an Arm Cortex-M0+ RISC core, memory protection unit, enhanced I/O, and embedded communication peripherals for compact, low-energy embedded systems. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals such as serial interfaces and timers. Within the semiconductor hierarchy, the STM32L071CZU6 belongs to the Arm Cortex-M microcontroller class and the STM32L0 access-line family. Its ultra-low-power positioning makes it appropriate for battery-operated sensors, compact industrial controls, connected accessories, and devices that spend substantial time in sleep or low-power operating modes. Three headline characteristics define the part. Its Arm Cortex-M0+ processor provides 32-bit arithmetic and operates up to 32 MHz, while 192 KB of Flash stores application firmware. The 20 KB SRAM supports working data and stack operations, and the 48-pin UFQFPN package offers a 7 mm by 7 mm surface-mount footprint. The manufacturer also documents 6 KB of data EEPROM and a memory protection unit. The embedded peripheral set supports I2C, SPI, and UART communication, allowing the MCU to connect sensors, transceivers, storage devices, and human-interface modules without requiring separate interface controllers. The 32-bit architecture and 32 MHz operating frequency provide useful processing headroom for protocol handling, state machines, data acquisition, and low-complexity control loops, while the STM32L0 platform emphasizes low-power operation and a broad set of enhanced I/O resources. Typical uses include industrial sensor nodes, building-automation endpoints, battery-powered monitors, compact data loggers, and connected embedded accessories. In an I2C sensor node, the MCU can manage acquisition and local processing while communicating with a host through UART or SPI. In a battery-powered monitor, its low-power architecture supports designs that spend most of their time idle and wake periodically to sample or transmit information. Board design should preserve access to all power, ground, reset, clock, boot, and peripheral pins while placing decoupling capacitors close to the supply pins. Firmware replacement must also account for the MCU's pin arrangement, boot configuration, and exposed-pad requirements. Because detailed operating-voltage, current, thermal, and exposed-pad data were not included in the supplied dataset, those values must be confirmed in the current STMicroelectronics datasheet before release. This product page combines verified manufacturer and distributor information, same-package alternatives, application guidance, and design cautions that are not presented together in the basic distributor listings. It is intended to accelerate component evaluation while preserving traceability to the official STM32L071xZ datasheet.

Permintaan RFG Kontak
STM32L071K8U3 - 32MHz, 64KB Ultra-Low-Power MCU | ST
STM32L071K8U3

STM32L071K8U3 - 32MHz, 64KB Ultra-Low-Power MCU | ST

The STMicroelectronics STM32L071K8U3 is an ultra-low-power, 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz operating frequency, 64 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. It is designed for compact, battery-powered embedded systems that need efficient processing, low standby power, and integrated mixed-signal capabilities without requiring a large external memory subsystem. What is an ultra-low-power microcontroller? An ultra-low-power MCU is a semiconductor controller optimized to complete sensing, control, and communications tasks while consuming little active and sleep energy. The STM32L0 access line belongs to the STM32 family of 32-bit Arm Cortex-M microcontrollers and combines a low-power CPU with timers, communication peripherals, analog conversion, and GPIO in one package. This integration reduces board area, component count, and system power compared with a discrete control design. Verified source data identifies an Arm Cortex-M0+ core, 32 MHz maximum operating frequency, 64 KB organized as 64K x 8 Flash, and a 32-UFQFPN 5 x 5 mm package. The Mouser listing further identifies the device as an ultra-low-power Arm Cortex-M0+ MCU with 64 KB of Flash and a 32 MHz CPU. Additional RAM size, supply-voltage range, ADC characteristics, timer resources, GPIO count, and package tolerances are not present in the supplied source excerpts and therefore require confirmation from the manufacturer documentation. The STM32L0 architecture is suitable for energy-sensitive control systems because software can place the processor into low-power operating states between events. Low-power execution is particularly useful for portable sensors, where the MCU may wake to read an analog value, update an output, exchange data, and return to sleep. The 64 KB Flash capacity also accommodates embedded firmware, boot logic, configuration data, and application code in a compact 32-pin package. Typical uses for this microcontroller include connected environmental sensors, compact industrial monitors, battery-powered data loggers, appliance controllers, low-power wireless sensor nodes, and wearable accessories. Selection should prioritize verified peripheral compatibility, pin-level requirements, firmware portability, and power-mode support rather than core frequency alone. A firmware migration between STM32 families is simpler when peripheral behavior and software abstractions remain consistent, but a new design still requires board-level review. PCB implementation should preserve clean grounding and short analog paths around MCU power and sensing pins. Decoupling capacitors should be placed close to the associated supply pins, while exposed-pad or thermal requirements must follow the exact land pattern in the official package drawing. Firmware should use the correct startup vector table, clock initialization, and low-power mode transitions; excessive polling can negate the benefit of a sleep-capable MCU. This page combines verified distributor and manufacturer listings, commercial availability links, procurement context, and package-specific design guidance. It does not infer undocumented electrical values, and it distinguishes confirmed STM32L071K8U3 facts from parameters that still require verification in the official datasheet.

Permintaan RFG Kontak
STM32L071K8U6 - 32MHz Cortex-M0+ 64KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM32L071K8U6

STM32L071K8U6 - 32MHz Cortex-M0+ 64KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM32L071K8U6 is an ultra-low-power Arm Cortex-M0+ 32-bit microcontroller operating at up to 32 MHz, with 64 KB of Flash memory (64K x 8) and a 12-bit ADC, packaged in a 32-pin UFQFPN (5 x 5 mm) package with exposed pad. It is specified for a -40 °C to +85 °C ambient range and operates from 2.5 V and 3.3 V supply rails, making it a compact, low-cost building block for always-on embedded nodes. An ultra-low-power microcontroller is a class of MCU designed to minimize average energy consumption rather than just peak performance. The STM32L0 access line combines the Arm Cortex-M0+ core with multiple low-power sleep and stop modes, so a battery-powered design can spend most of its life at microamp current and wake to full 32 MHz operation only when work is required. In the standard electronics hierarchy, an MCU such as this sits below the microprocessor class and above embedded controllers: it integrates CPU core, Flash, SRAM, ADC, timers, and communication peripherals on a single die. Key features of the STM32L071K8U6 include a 32 MHz Cortex-M0+ core with a 64 KB Flash program memory and an SRAM of the same low-power access-line class, a 12-bit successive-approximation ADC, low-power sleep and stop modes for duty-cycled operation, and an extremely small 5 x 5 mm footprint that saves board area in wearables and sensor nodes. The exposed pad under the UFQFPN package provides a low-resistance thermal path, which matters when the device runs continuously at 32 MHz. Technically, the part belongs to the STM32L071xx family, whose design centers on fast wake-up times and low current draw in every non-active mode. Because the Cortex-M0+ architecture is a compact 32-bit RISC core, the same firmware that handles simple control loops also supports moderate protocol stacks over the on-chip USART, SPI, and I2C peripherals. The 5 x 5 mm land pattern, with 0.5 mm pitch pads, is dense enough for compact modules but requires careful PCB layout planning and fine-pitch assembly capability. Typical applications include battery-operated sensor nodes, water and gas meters, industrial IoT endpoint devices, portable health monitoring accessories, energy-harvesting monitors, and smart-home peripherals where the combination of small size, low standby current, and a 12-bit ADC is more valuable than raw processing power. When designing around this MCU, follow the manufacturer's recommended decoupling network with a 100 nF ceramic capacitor on each supply rail close to the pins, use the exposed pad as a ground plane connection, and route the NRST pin with a short, low-capacitance path. Confirm flash endurance and write-cycle requirements for logging applications, and keep the supply rail within the specified voltage range during brownout transitions to avoid unintended resets. This page consolidates manufacturer specifications, drop-in replacement options, and practical design guidance for engineers evaluating the STM32L071K8U6, going beyond what a distributor catalog listing or a bare datasheet link provides.

Permintaan RFG Kontak
STM32L071KBT6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L071KBT6

STM32L071KBT6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L071KBT6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz operating frequency, 128 KB of Flash memory, and a 32-pin LQFP 7 x 7 mm package. It combines an energy-efficient RISC core with integrated peripherals for compact control, sensing, communications, and low-power embedded applications. An ultra-low-power microcontroller is designed to minimize energy consumption during active operation, sleep, and low-power modes. The STM32L0 series belongs to the hierarchy of embedded MCU, Arm Cortex-M processor, 32-bit microcontroller, and power-managed semiconductor solutions. This combination makes it useful where battery life, compact construction, and deterministic control are more important than maximum compute throughput. The STM32L071KBT6 operates at up to 32 MHz and includes 128 KB of programmable Flash organized as 128K x 8. Its 32-LQFP package provides 32 external pins and is suitable for conventional surface-mount PCB assembly. The device supports 2.5 V and 3.3 V supply arrangements, a 12-bit ADC, and an operating temperature range from -40°C to +85°C. Arm Cortex-M0+ architecture gives the device a compact instruction set suited to control loops, peripheral configuration, and interrupt-driven embedded software. The STM32L0 feature set targets low-energy designs without requiring a high-pin-count package. Pin assignment and peripheral multiplexing should be checked against the STM32L071KB datasheet before assigning analog, debug, clock, or communication functions to specific pins. Typical applications include battery-powered sensor nodes, compact industrial monitoring equipment, low-power IoT endpoints, building-control modules, compact consumer accessories, and small motor or actuator controllers. The combination of Cortex-M0+ processing, 128 KB Flash, low-power design goals, and a 32-pin package supports firmware-rich products with controlled board area. When designing around the STM32L071KBT6, select decoupling capacitors according to the datasheet power-supply recommendations, preserve the required clock and boot configuration, and route debug signals for reliable firmware recovery. Low-power performance also depends on firmware: disable unused peripherals, use suitable sleep modes, and avoid leaving GPIO pins floating on inputs. This product record combines manufacturer product information, package and memory details, engineering-oriented design guidance, and a strict same-footprint comparison of STM32L071 family options. It helps engineers distinguish flash-density and ordering variants before committing a PCB layout or production BOM.

Permintaan RFG Kontak
STM32L071KBU3 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071KBU3

STM32L071KBU3 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L071KBU3 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 128 KB of flash memory in a 32-pin UFQFPN package measuring 5 x 5 mm. It belongs to the STM32L0 access-line family and is designed for compact, energy-conscious embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interfaces onto one package. The STM32L071KBU3 combines a 32-bit RISC processor with 128 KB of flash and seven DMA channels, making it suitable for connected sensors, compact control modules, industrial equipment, medical devices, and low-power consumer products. Its Cortex-M0+ architecture supports efficient embedded control while keeping implementation complexity relatively low. The device operates with an Arm Cortex-M0+ core at 32 MHz and includes eight timers according to the product listing. Seven DMA channels can move data between peripherals and memory, reducing CPU involvement in routine transfers. The 128 KB flash configuration provides room for application code, configuration data, and firmware updates in space-constrained designs. The STM32L071KBU3 is packaged as a 32-pin UFQFPN with a 5 x 5 mm body. Its small footprint supports high-density PCB layouts, although exposed-pad thermal design and assembly process controls remain important. The part is identified as an ultra-low-power microcontroller, making it especially relevant to designs that spend substantial operating time in low-power states. Typical uses include environmental sensors, IoT endpoints, compact motor-control boards, wearable accessories, metering equipment, and industrial automation modules. For designs where footprint, processing speed, memory capacity, and low-power operation are the primary requirements, the STM32L071KBU3 provides a focused MCU platform without the resource demands of higher-performance Cortex-M devices. Before layout, use the manufacturer pin-description table and package drawing to assign power, ground, clock, debug, and I/O connections. Confirm the device variant, pin multiplexing, decoupling requirements, and exposed-pad connection against the STM32L071KB datasheet. This page summarizes the confirmed core, memory, package, and peripheral information while distinguishing the 128 KB target from the related 192 KB variant.

Permintaan RFG Kontak
STM32L071KBU6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071KBU6

STM32L071KBU6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L071KBU6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz operating frequency, 128 KB of Flash memory, and 20 KB of SRAM, housed in a 32-pin UFQFPN package measuring 5 mm by 5 mm. An ultra-low-power microcontroller is designed to balance processing capability with minimum energy consumption during active operation and low-power standby. The STM32L0 series combines a compact Arm Cortex-M0+ core, embedded Flash, SRAM, communication peripherals, and low-power features in a small package. This hierarchy places the device between a general-purpose embedded processor and a highly integrated low-power system-on-chip, making it suitable for compact control, sensing, and communications products. The STM32L071KBU6 operates from a 1.65 V to 3.6 V supply, runs at up to 32 MHz, and provides 128 KB of Flash for firmware and data. Its 32-pin UFQFPN package supports a compact surface-mount footprint, while the available 20 KB of SRAM provides working memory for protocol stacks, sensor handling, and control routines. The device is identified as an STM32L0-series microcontroller with an Arm Cortex-M0+ 32-bit RISC core. The product belongs to STMicroelectronics' STM32L071KB access-line family, where the “access” designation identifies an entry-level yet broadly capable ultra-low-power MCU. The architecture is suitable for designs that require deterministic embedded control without the memory capacity or processing performance of a higher STM32 series. Its low operating-voltage range is particularly appropriate for battery-powered equipment operating from regulated low-voltage rails. Typical applications include compact sensor nodes, low-power wireless peripherals, industrial monitoring devices, portable measurement instruments, home-automation controllers, and wearable accessories. In each case, the MCU can execute control logic and manage low-speed peripheral communication while retaining a compact footprint. Designers should allocate board area for decoupling and confirm the exposed-pad thermal and electrical requirements in the manufacturer package documentation. When designing the PCB, place the device's input and output decoupling capacitors close to their corresponding supply pins and follow the recommended land pattern for the 32-pin UFQFPN package. The exposed pad requires the correct solder and thermal strategy; it is not an optional connection. Confirm peripheral pin assignments, alternate functions, clock configuration, and low-power mode requirements against the manufacturer datasheet before finalizing the schematic. This product page combines core device specifications, package information, application guidance, and an honest assessment of drop-in replacement options. Because direct substitute data is limited, alternatives are included only when the package and principal operating characteristics can be supported, avoiding a padded list of electrically unsuitable replacements.

Permintaan RFG Kontak
STM32L071RBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071RBT6

STM32L071RBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L071RBT6 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M0+ processor core, operating at up to 32 MHz with 128 KB of embedded Flash memory in a 64-LQFP 10 x 10 mm package. It combines compact embedded processing with low-power-oriented design for battery-powered sensors, industrial equipment, connected products, and compact control systems. An ultra-low-power microcontroller is a semiconductor designed to complete control, sensing, and communication tasks while minimizing energy consumption. The STM32L0 access-line family combines an Arm Cortex-M0+ RISC core with embedded Flash, SRAM, and low-power peripherals in a single device. This places it within the hierarchy of microcontroller, embedded processor, RISC processor, and power-efficient semiconductor devices. The STM32L071RBT6's headline characteristics include a 32-bit Arm Cortex-M0+ core, a maximum stated operating frequency of 32 MHz, and 128 KB of Flash organized as 128K x 8 bits. Its 64-lead LQFP package provides a familiar leaded footprint for manufacturing, inspection, and manual or automated assembly. The device also provides 20 KB of SRAM according to the STM32L071RB family datasheet listing. The Cortex-M0+ architecture provides a simple instruction set and efficient real-time execution suitable for embedded control workloads. Because the STM32L071 series is positioned as an access-line, ultra-low-power MCU, it is appropriate for designs where low energy use, compactness, and a broad embedded feature set matter more than high-end graphics, large memory configurations, or high-pin-count connectivity. Typical uses include low-power sensor nodes, battery-operated monitoring equipment, compact industrial controllers, building and access peripherals, and connected products that periodically wake to perform a measurement or communicate information. The 128 KB Flash capacity gives embedded developers room for application code, drivers, protocol stacks, and configuration data within a single-package solution. PCB design should preserve access to all 64 package leads and follow the manufacturer pin-definition and layout guidance exactly. Power decoupling, clock stability, reset configuration, and programming access are especially important in compact industrial products. Firmware qualification should also include tests across the intended voltage and temperature limits because low-power behavior and peripheral timing must be verified in the finished system. This product page combines the manufacturer family information, package and memory details, sourcing guidance, drop-in candidates, and application-oriented engineering notes. It helps designers evaluate the STM32L071RBT6 not only as a 32 MHz Cortex-M0+ MCU, but also as a practical 128 KB Flash, 64-LQFP platform for compact, energy-conscious embedded products.

Permintaan RFG Kontak
STM32L071VBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071VBT6

STM32L071VBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L071VBT6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core, 32 MHz maximum operating frequency, 128 KB of flash memory, and 20 KB of SRAM in a 100-lead LQFP package measuring 14 mm by 14 mm. Its operating supply range is 1.65 V to 3.6 V, making it suitable for compact embedded systems operating from low-voltage rails. An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption during active processing, standby, and low-power states. The STM32L0 access-line family combines general-purpose embedded control with small memory requirements and a broad pin count. Within the device hierarchy, STM32L071VBT6 belongs to STM32L0 series MCUs, Arm Cortex-M0+ processors, 32-bit embedded controllers, and the broader semiconductor category. The headline configuration includes a 32 MHz Arm Cortex-M0+ processor, 128 KB of program flash, 20 KB of SRAM, and 84 I/O lines in an LQFP-100 package. The 128 KB flash capacity provides room for application code, configuration data, and boot routines, while the 20 KB SRAM supports stack space, working variables, buffers, and peripheral data handling. The 84 available I/O positions also allow a board to expose sensors, communication interfaces, control signals, indicators, and external memory connections. STMicroelectronics describes the STM32L071xx devices as access-line ultra-low-power MCUs built around the Arm Cortex-M0+ 32-bit RISC core. The STM32L071VBT6 operates up to 32 MHz and operates from a 1.65 V to 3.6 V supply. Its large LQFP-100 footprint supports broad external connectivity, although the higher pin count makes the package physically larger than compact 32-pin or 48-pin microcontroller options. Typical application areas include battery-operated sensors, industrial monitoring equipment, compact control modules, connected measurement devices, low-power data loggers, and embedded products that require substantial I/O capacity. In these systems, the 128 KB flash supports a complete embedded application without an external program-memory device, while the 20 KB RAM can accommodate protocol buffers and application state. Design around the 1.65 V minimum operating voltage and confirm the supply tolerance of every attached peripheral. Decoupling, grounding, and signal routing should follow the guidance in the manufacturer datasheet and reference hardware. Because the package has 100 leads, pin assignment and escape routing require careful review before committing the PCB layout. This product overview consolidates the verified device identity, memory configuration, package information, operating limits, sourcing route, and engineering selection considerations. It also distinguishes the confirmed STM32L071VBT6 configuration from unverified substitute devices, helping designers avoid assuming that a similar MCU is pin-to-pin compatible.

Permintaan RFG Kontak
STM32L071VZT6 - 32MHz Cortex-M0+ 192KB MCU | STMicroelectronics
STM32L071VZT6

STM32L071VZT6 - 32MHz Cortex-M0+ 192KB MCU | STMicroelectronics

The STMicroelectronics STM32L071VZT6 is an ultra-low-power 32-bit microcontroller with a 32 MHz Arm Cortex-M0+ core, 192 KB of Flash memory, and a 3 V supply rating in a 100-lead LQFP 14 x 14 mm package. It belongs to the STM32L071 access-line family and is designed for compact, low-power embedded systems requiring substantial Flash storage and a broad set of general-purpose peripherals. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption during active operation, sleep, and standby states. The STM32L071 series sits within STMicroelectronics' STM32L0 product hierarchy: low-power microcontroller, 32-bit embedded MCU, Arm Cortex-M0+ processor, and general-purpose semiconductor. This positioning makes it suitable for battery-powered sensors, portable measurement equipment, industrial controllers, and connected products that must balance processing capability with energy efficiency. The three headline attributes of the STM32L071VZT6 are its 32 MHz operating frequency, 192 KB of Flash memory, and 100-lead LQFP construction. According to the STMicroelectronics STM32L071VZ product page and distributor listings, the device uses an Arm Cortex-M0+ core operating at 32 MHz and provides 192 KB of Flash organized as 192K x 8. The listed 100-LQFP package offers a large pin count for designs that need more external connectivity than smaller 48- or 64-lead packages provide. The STM32L0 family architecture supports efficient embedded control while retaining a conventional peripheral and GPIO-oriented design. STMicroelectronics identifies the STM32L071VZ as part of its ultra-low-power access line, indicating a balance between performance, memory, and energy-conscious operation. The Cortex-M0+ instruction set is appropriate for control loops, protocol handling, data acquisition, and supervisory tasks that do not require the compute performance of an Arm Cortex-M4 or M7 core. Typical uses include compact environmental monitors, low-power sensor nodes, industrial sensing modules, building-access controls, wearable-adjacent accessories, and battery-operated instruments. A network interface such as the LAN8720A-CP Ethernet PHY can be paired with the MCU when wired connectivity is required, while PCA9536DR-style digital expanders can add general-purpose I/O. Firmware and software configuration determine the final application, so all peripheral availability and operating limits must be confirmed in the manufacturer datasheet before design release. For PCB implementation, the 100-lead LQFP package requires a fine-pitch land pattern, careful decoupling near each supply pin, and adequate via-in-pad or fan-out routing beneath the device. Designers should confirm the exact pin multiplexing, debug-pad requirements, and decoupling recommendations against the STMicroelectronics datasheet rather than relying on a generic LQFP footprint library. This page consolidates the verified distributor specifications, manufacturer product information, family-level alternatives, and practical design considerations for STM32L071VZT6 evaluation. It also distinguishes verified parameters from unresolved details so procurement and engineering teams can assess supply, footprint, and firmware implications before committing to the design.

Permintaan RFG Kontak
STM32L072CBT6 - 32MHz Cortex-M0+ MCU 128KB Flash USB | STMicroelectronics
STM32L072CBT6

STM32L072CBT6 - 32MHz Cortex-M0+ MCU 128KB Flash USB | STMicroelectronics

The STMicroelectronics STM32L072CBT6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller running at up to 32 MHz with 128 KB of Flash, 20 KB of SRAM, and a crystal-less USB 2.0 full-speed device interface, supplied in a 48-pin LQFP (7x7 mm) industrial-grade package. An MCU (microcontroller unit) integrates a CPU core, embedded memory, and peripherals on a single chip, acting as the compute element in embedded designs. The STM32L072xx sits within the STM32L0 ultra-low-power family of Arm Cortex-M0+ devices, occupying the energy-conscious tier below the mainstream STM32F0 and the higher-performance STM32L4 lines, targeting battery-powered systems where quiescent current is the dominant figure of merit. Differentiating features include the crystal-less USB 2.0 full-speed controller (eliminating the external 12 MHz crystal in many designs), seven low-power modes reaching sub-µA standby, a flexible low-power timer (LPTIM) for autonomous operation, a 12-bit ADC, and a 1.65 V to 3.6 V supply range that supports direct coin-cell, alkaline, or Li-ion operation. Multiple USART, SPI, and I2C interfaces aggregate sensors and radios. The Cortex-M0+ core pairs a two-stage pipeline with single-cycle I/O for low dynamic power, while the integrated USB 2.0 FS PHY, BOR, and programmable voltage detector (PVD) reduce external components. Independent watchdogs (WWDG/IWDG), a real-time clock, and an AES-128 hardware accelerator address safety, timekeeping, and security in metering or IoT end nodes. Typical applications include battery-powered metering, portable medical monitors, USB-connected sensor dongles, and smart-building IoT end nodes. The crystal-less USB is particularly attractive for low-cost, small-form-factor devices where a 12 MHz crystal would compromise enclosure size. Design consideration: budget SRAM carefully (20 KB) when running a USB stack plus wireless protocol buffer - enabling link-layer encryption or larger descriptors can push SRAM to its ceiling. This page synthesizes distributor pricing, pin-compatible STM32L0 alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
STM32L072CZT6 - 192KB Flash Cortex-M0+ MCU | STMicroelectronics
STM32L072CZT6

STM32L072CZT6 - 192KB Flash Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L072CZT6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with 192 KB of Flash, 20 KB of SRAM, and integrated USB 2.0 (crystal-less) in a 48-pin LQFP (7x7 mm) package. It runs at up to 32 MHz and operates from a 1.65 V to 3.6 V supply, making it suitable for battery-powered and energy-harvesting applications. The part belongs to the STM32L0 ultra-low-power family with multiple low-power modes (Stop, Standby, Shutdown) drawing sub-microamp quiescent currents. An ARM Cortex-M0+ microcontroller (MCU) is a 32-bit RISC processor core from ARM's Cortex-M family optimized for energy efficiency and deterministic interrupt response in deeply embedded systems. The Cortex-M0+ sits at the low-power end of the Cortex-M lineup (Cortex-M0+ -> Cortex-M0 -> Cortex-M3/M4/M33), and STM32L0 microcontrollers sit at the low-power end of the STM32 product hierarchy (STM32L0 -> STM32L1/L4/L5 -> STM32F/G/H families). L0-series MCUs target coin-cell, sensor, metering, and wearable designs where standby current and integrated analog peripherals matter more than raw compute throughput. Key features of the STM32L072CZT6 include 192 KB Flash with ECC, 20 KB SRAM, a 12-bit ADC with hardware oversampling, two ultra-low-power comparators, a real-time clock, multiple timers, and a USB 2.0 full-speed device interface that operates without an external crystal. The device supports AES-128 hardware encryption for secure connectivity in IoT endpoints. Integrated peripherals include I2C, SPI, USART, USB, and capacitive-touch sensing I/Os. The architecture combines a Cortex-M0+ core with ST's ultra-low-power design techniques, including multiple voltage domains, low-power RTC, and a wide set of GPIOs tolerant to 5 V. The 48-pin LQFP package balances compact board footprint with easy hand-soldering and breadboard prototyping, and supports the full STM32L072xx peripheral set on the available I/O count. Typical applications include battery-powered IoT sensors, USB-connected wearables, smart metering endpoints, wireless sensor nodes, medical patch devices, asset trackers, and human-machine interface panels. Designers value the part for USB connectivity in small form factors, deep-sleep currents, and an established STM32 toolchain (STM32CubeIDE, HAL/LL libraries). When designing with this part, plan decoupling around the 1.2 V core regulator pin and verify the low-power mode transitions in your application firmware before committing to battery-life calculations.

Permintaan RFG Kontak
STM32L072CZT6TR - 192KB Flash Cortex-M0+ USB MCU | STMicroelectronics
STM32L072CZT6TR

STM32L072CZT6TR - 192KB Flash Cortex-M0+ USB MCU | STMicroelectronics

The STMicroelectronics STM32L072CZT6TR is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller delivering 32 MHz CPU performance with 192 KB of embedded Flash and 20 KB of SRAM, integrated USB 2.0 FS crystal-less connectivity, and housed in a 48-pin LQFP (7x7 mm) tape-and-reel package. Designed for energy-sensitive embedded control, the device combines an ARM Cortex-M0+ core, peripherals including ADC, timers, I2C, SPI, USART, and USB, and the energy-saving features of the STM32L0 family. An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) processor core designed by ARM Holdings for embedded systems requiring predictable performance, low power consumption, and small silicon area. The Cortex-M0+ sits at the lowest power tier of the Cortex-M family and inherits the broader taxonomy of microcontroller -> embedded processor -> semiconductor device. STM32L0 devices specifically target battery-powered and energy-harvesting applications where quiescent current is measured in microamps. Key features include six ultra-low-power modes (Low-Power Run, Sleep, Low-Power Sleep, Stop with RTC, Standby with RTC, and Shutdown), a 12-bit ADC supporting up to 16 channels, multiple communication interfaces (USB 2.0 FS crystal-less, up to three I2C, two SPI, two USART/UART, one LPUART), and embedded RTC with calendar and alarm functions. The 192 KB Flash supports in-application programming (IAP) via USART, SPI, or USB. Architecturally, the STM32L072CZT6TR separates digital and analog supply domains (VDD/VDDA) to allow analog peripherals to operate while the digital core is stopped, and integrates a 1.2 V internal core regulator that powers the CPU only when required. The crystal-less USB 2.0 Full-Speed interface eliminates the external 8 MHz crystal, reducing BOM cost and board area. The device operates from 1.65 V to 3.6 V (down to 1.8 V with BOR disabled) across the -40C to +125C temperature range, making it suitable for industrial, metering, sensor, and consumer applications. Typical applications include battery-powered sensor nodes, USB-equipped industrial controllers, smart metering, wearable health monitors, and portable IoT edge devices. The crystal-less USB makes it ideal for any compact USB device without a physical connector, including medical measurement USB dongles. When designing with this MCU, prioritize decoupling capacitor placement close to VDD pins (100 nF ceramic) and consider using the integrated LDO regulator bypass for ultra-low-power Stop modes. Selecting the proper low-power mode for each use case (Run, Sleep, Stop, Standby, Shutdown) is essential to achieving datasheet-typical quiescent current figures. This page synthesizes distributor pricing, drop-in alternatives, and practical low-power design notes not found directly in the manufacturer datasheet, providing AEO-optimized answers for engineers evaluating ultra-low-power Cortex-M0+ USB microcontrollers.

Permintaan RFG Kontak
STM32L072KBU6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
STM32L072KBU6

STM32L072KBU6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

STMicroelectronics STM32L072KBU6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 128 KB of Flash memory, 20 KB of SRAM, and USB 2.0 connectivity in a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device combines an efficient embedded microcontroller core with analog, timing, watchdog, and communications peripherals for compact, low-energy embedded systems. An ultra-low-power microcontroller is an integrated semiconductor that executes embedded software while minimizing energy consumption during active operation and low-power standby. The STM32L0 product family belongs to the broader hierarchy of 32-bit microcontrollers, embedded processors, and semiconductor devices. Its low-power-oriented architecture makes it suitable for systems that must operate from limited energy budgets while still supporting firmware updates, data acquisition, communications, and real-time control. Key features include a 32 MHz Arm Cortex-M0+ core, 128 KB of Flash, and 20 KB of SRAM. The analog subsystem provides one 12-bit ADC with hardware oversampling, two DAC channels, and two ultra-low-power comparators. Timing and supervisory resources include four general-purpose 16-bit timers, two basic timers, one low-power timer, one RTC, one SysTick timebase, and two watchdogs. USB 2.0 crystal-less connectivity simplifies designs that need USB device communication without a separate crystal. The STM32L072xx architecture integrates connectivity and analog functions on a single low-power MCU. Hardware oversampling improves ADC data acquisition by processing multiple conversion samples internally, while the RTC and low-power timer support periodic events that can wake the system. The independent and window watchdog functions help detect lockups and unexpected operating conditions. Crystal-less USB operation can reduce board-level component requirements, although firmware, oscillator configuration, and signal-integrity validation remain essential. Typical applications include USB-connected sensor nodes, compact industrial data loggers, wearable accessories, battery-powered measurement instruments, low-power control panels, and USB-to-serial or configuration adapters. The 32-pin 5 mm by 5 mm package supports space-constrained products, while the combination of USB, ADC, DAC, comparators, timers, and RTC reduces the number of separate discrete components required in a typical control or measurement design. Designers should verify supply-voltage limits, USB transceiver requirements, clocking, and low-power mode transitions against the manufacturer datasheet before layout release. Place decoupling capacitors close to the supply pins, maintain the required USB data-routing geometry, and confirm exposed-pad soldering and thermal conditions. Firmware should also exercise watchdog, reset, and sleep-mode behavior because low-power system correctness depends on both electrical design and peripheral configuration. This page consolidates the manufacturer device specifications with application guidance, strict same-package alternatives, and design-oriented comparisons. It is intended to help engineers evaluate STM32L072KBU6 for low-power embedded designs without overlooking USB connectivity, analog-resource constraints, memory requirements, or package-level implementation details.

Permintaan RFG Kontak
STM32L072KBU7 - 32MHz Cortex-M0+ 128KB Flash | ST
STM32L072KBU7

STM32L072KBU7 - 32MHz Cortex-M0+ 128KB Flash | ST

The STMicroelectronics STM32L072KBU7 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 128 KB of flash memory, and USB 2.0 crystal-less connectivity in a 32-pin UFQFPN package. It combines an energy-efficient embedded design with a compact 5 mm × 5 mm footprint for space-constrained embedded products. An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption during active operation, sleep, standby, and wake-up transitions. The STM32L0 Series belongs to the hierarchy microcontroller → 32-bit RISC microcontroller → ARM Cortex-M0+ microcontroller → ultra-low-power embedded MCU. This makes it suitable for battery-operated sensors, portable measurement equipment, connected accessories, and industrial devices that spend most of their operating time in a low-power state. The verified configuration includes a 32 MHz ARM Cortex-M0+ core, 128 KB of flash memory, USB 2.0 crystal-less operation, and operation from 2.5 V or 3.3 V supply levels. The microcontroller is identified in a 32-UFQFPN 5 mm × 5 mm package with an exposed pad. Its 128 KB program memory provides room for application firmware, USB device firmware, communication stacks, and field-upgrade routines without requiring external program memory. The STM32L072KBU7 is based on the STM32L072KB device family. STMicroelectronics describes the STM32L072xx line as combining ultra-low-power behavior with USB 2.0 crystal-less connectivity, allowing USB clock recovery without a discrete crystal when the board budget and clock-tolerance requirements permit. Because the supplied data does not enumerate RAM capacity, GPIO count, temperature limits, or individual peripheral ratings, those values are marked as data needed rather than inferred. Typical uses include USB-connected sensor nodes, compact data loggers, low-energy industrial monitors, firmware-update gateways, and handheld measurement instruments. The compact package also suits USB accessories and embedded systems where board area is constrained. Firmware can use the USB interface for enumeration and data transfer while retaining the Cortex-M0+ ecosystem of development tools, peripheral libraries, and application support. Designers should confirm the exact pin mapping, exposed-pad connection, decoupling requirements, and low-power current budgets against the STM32L072KB manufacturer documentation before layout release. The provided distributor summaries do not expose complete electrical or thermal tables, so no ADC accuracy, temperature range, or current-consumption value is asserted here. The exposed thermal pad should be evaluated as a potential ground and heat-spreading connection according to the manufacturer's land-pattern guidance. This page consolidates verified distributor specifications, same-family drop-in candidates, application guidance, and design considerations that are not presented together on a typical distributor listing. Because no verified cross-brand pin-compatible substitute was identified in the supplied cross-reference results, the alternatives are limited to documented STM32L0 family variants rather than padding the list with mechanically similar but electrically different devices.

Permintaan RFG Kontak
STM32L072RBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L072RBT6

STM32L072RBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STM32L072RBT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M0+ core running at up to 32 MHz. It integrates 128 KB of Flash memory and 20 KB of SRAM, along with a rich set of analog and digital peripherals, making it ideal for battery-powered and energy-harvesting applications. An ultra-low-power microcontroller (MCU) is a system-on-chip that combines a processor core, memory, and peripherals while minimizing power consumption to extend battery life. The STM32L0 series is part of the STM32 family, which spans from entry-level Cortex-M0+ to high-performance Cortex-M7 devices. Within the power management hierarchy, these MCUs are designed for applications where energy efficiency is paramount, such as IoT sensors, wearables, and industrial monitoring. Key features include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC, and Shutdown), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and an ultra-low-power timer. The device also integrates a USB 2.0 full-speed crystal-less interface, an LCD driver supporting up to 8x40 segments, and a true random number generator (TRNG). The operating voltage range is 1.8V to 3.6V, with a typical current consumption of 84 uA/MHz in Run mode and 0.29 uA in Standby mode with RTC. The STM32L072RBT6 is built on ST's ultra-low-power technology, featuring a flexible clocking scheme with an internal 16 MHz RC oscillator, an external 32.768 kHz crystal for RTC, and a PLL for higher frequencies. The device supports a wide range of communication interfaces including I2C, SPI, USART, and LPUART, enabling seamless connectivity in sensor networks. The integrated LCD driver and USB interface reduce external component count, simplifying board design. Typical applications include smart meters, medical devices, fitness trackers, wireless sensor nodes, and industrial process control. The ultra-low-power modes allow the MCU to operate for years on a single coin-cell battery, making it a preferred choice for IoT edge devices. When designing with this MCU, careful attention to the power supply decoupling and the selection of the appropriate low-power mode is essential to achieve the lowest possible energy consumption. The use of the internal RC oscillator can save cost, but for time-critical applications, an external crystal is recommended.

Permintaan RFG Kontak
STM32L072RZI6D - 192KB Flash 32MHz Cortex-M0+ MCU 64-UFBGA | STMicroelectronics
STM32L072RZI6D

STM32L072RZI6D - 192KB Flash 32MHz Cortex-M0+ MCU 64-UFBGA | STMicroelectronics

The STMicroelectronics STM32L072RZI6D is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller featuring 192KB of Flash, 20KB of SRAM, and a 32MHz maximum CPU clock speed, housed in a 64-ball UFBGA (5x5 mm) package. The device integrates a USB 2.0 Full-Speed interface (with on-chip PHY and crystal-less operation), an AES-128 encryption engine, and a true random number generator (TRNG), all within the STM32L0 ultra-low-power family. The wide operating voltage range of 1.65V to 3.6V and sub-uA standby currents make it a workhorse for battery-powered IoT nodes. An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set core optimized for energy-sensitive embedded applications. It belongs to the microcontroller family hierarchy: microcontroller -> MCU -> 32-bit ARM MCU -> Cortex-M0+ -> ultra-low-power MCU -> STM32L0 family. The M0+ architecture trades peak performance for exceptionally low power and code density, making it ideal for applications where battery life matters more than GHz-class throughput. Key features of the STM32L072RZI6D include 192KB Flash, 20KB SRAM, 6KB EEPROM, a 12-bit ADC with up to 16 channels, multiple low-power modes down to deep-sleep with RTC retention, an integrated USB 2.0 Full-Speed peripheral (with on-chip PHY), and AES-128 hardware acceleration for secure communications. The device also includes a real-time clock (RTC), capacitive-touch sensing hardware (TSC), multiple timers, and a robust set of serial peripherals (USART, SPI, I2C). It is qualified for industrial temperature range of -40C to +85C and ships in a compact 5x5 mm 64-ball UFBGA package, reducing PCB footprint relative to equivalent LQFP64 parts. The STM32L072RZI6D leverages the Cortex-M0+ core with the ST proprietary ultra-low-power process technology. Designers benefit from the STM32CubeMX configuration utility, the STM32CubeL0 embedded software package with HAL/LL drivers, and broad toolchain support from IAR, Keil, and GCC-based IDEs. The device's integrated USB PHY eliminates the need for an external crystal on most USB designs, simplifying the BOM and reducing the PCB area required for USB connectivity. Typical applications include IoT sensor nodes, smart metering (gas, water and electricity), wireless M-Bus / wM-Bus endpoints, battery-powered asset trackers, medical wearables (continuous glucose monitors, pulse oximeters), and secure edge nodes where AES-128 hardware acceleration reduces firmware overhead. When designing with this device, plan decoupling capacitors as close as possible to the power pins and route the USB differential pair (D+/D-) with 90-ohm differential impedance and length matching. The integrated USB PHY requires careful PCB layout per ST application note AN4834 for signal-integrity compliance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the STM32L072RZI6D for new designs and second-source decisions as of 2026-10-10.

Permintaan RFG Kontak
STM32L072RZT6 - 32MHz Cortex-M0+ 192KB Flash MCU | STMicroelectronics
STM32L072RZT6

STM32L072RZT6 - 32MHz Cortex-M0+ 192KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L072RZT6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 192 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It belongs to the STM32L0 low-power microcontroller family and is designed for embedded designs requiring low energy consumption, USB connectivity, and a compact surface-mount footprint. An ultra-low-power microcontroller is a semiconductor device intended for battery-operated or energy-constrained embedded products. The STM32L0 family combines a low-power Arm Cortex-M0+ processor core with embedded Flash, SRAM, peripheral interfaces, and low-power operating modes. This places the MCU within the hierarchy of microcontroller, embedded processor, semiconductor, and system-on-chip design categories. Key device attributes include a 32 MHz Arm Cortex-M0+ core, 192 KB Flash, USB 2.0 crystal-less connectivity support, and a 64-LQFP package. The 192 KB Flash provides embedded firmware storage, while the USB capability supports connected peripheral, data-logging, and configuration applications. The LQFP package offers 64 accessible leads and is suitable for surface-mount PCB assembly. The STM32L072RZT6 is positioned for designs where low-power operation and USB connectivity are more important than high analog integration or high-speed digital processing. Its Arm Cortex-M0+ architecture is suitable for firmware execution, peripheral control, communications, and basic signal handling. Exact RAM size, supply-voltage limits, GPIO configuration, and peripheral current consumption require confirmation in the manufacturer datasheet before final schematic design. Typical applications include USB-connected sensors, compact data loggers, industrial control modules, battery-powered instruments, and wearable or portable measurement devices. In these systems, the MCU can manage low-power acquisition, device configuration, and USB data transfer while reducing the overall system power budget. PCB planning should reserve the 64-LQFP footprint, connect the required power and ground pins according to the manufacturer reference schematic, and route USB data lines as a controlled-impedance differential pair. Confirm the exact pin assignments, decoupling requirements, BOOT configuration, clock options, and exposed programming or debug connections in the manufacturer pinout and application documentation. This page combines the manufacturer product identity, package and memory details, search-specific sourcing questions, and practical replacement considerations for engineers evaluating the STM32L072RZT6. Because a true cross-manufacturer pin-to-pin replacement is uncommon in this device class, alternative listings should be screened carefully for package, memory, USB, peripheral, firmware, and lifecycle compatibility before schematic approval.

Permintaan RFG Kontak
STM32L072VBT6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L072VBT6

STM32L072VBT6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L072VBT6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller rated for operation up to 32 MHz, with 128 KB of Flash memory and USB 2.0 connectivity in a 100-pin LQFP 14 x 14 mm package. The device operates from a 1.65 V to 3.6 V supply range, making it suitable for compact embedded products that require low power consumption, USB connectivity, and broad peripheral integration. An ultra-low-power microcontroller is an embedded controller optimized to minimize energy use during active processing, sleep, and standby operation. The STM32L0 family combines an ARM Cortex-M0+ processor, embedded Flash and SRAM, GPIO, timers, communication peripherals, and low-power management within one device. This integration allows a product to replace separate processor, memory, interface, and supervisory components while simplifying firmware and PCB design. The STM32L072VBT6 provides a 32 MHz ARM Cortex-M0+ core and 128 KB of Flash for program storage. Its integrated USB 2.0 controller supports connected peripheral, host, and USB Type-C interface designs. The 100-pin LQFP package provides a high pin count for exposed GPIO and peripheral assignments while retaining a leaded surface-mount form factor that can simplify inspection and assembly. A wide 1.65 V to 3.6 V operating range supports low-voltage embedded systems. The STM32L072VB family combines USB connectivity with ultra-low-power operation for cost-sensitive embedded platforms. Because the MCU integrates USB and multiple peripherals, board designers can reduce external component count and preserve PCB area around connectors, sensors, and communications modules. The 32 MHz Cortex-M0+ architecture provides ample performance for sensor nodes, data acquisition, human-interface equipment, and low-power control systems while maintaining a straightforward embedded software model. Typical uses include USB-connected sensors, compact industrial controllers, wearable accessories, medical monitoring equipment, instrument interfaces, and low-power IoT nodes. The STM32L072VBT6 is particularly suitable when a design needs both a large GPIO footprint and USB without moving to a more complex microcontroller package. Its 128 KB Flash capacity also gives firmware developers room for USB stacks, application logic, diagnostics, and field-upgrade logic. Design around the manufacturer's recommended decoupling, clock, reset, and USB implementation guidance. Place the device's input capacitors close to its supply pins, confirm that the selected USB transceiver or connector meets the required electrical characteristics, and validate low-power mode transitions under the intended peripheral load. PCB signal integrity and USB routing should be checked with the complete stack rather than inferred from the MCU pinout alone. This product page combines manufacturer specifications, verified distributor listings, package information, application guidance, and a parameter-focused comparison with closely related STMicroelectronics devices. It is intended to help engineers identify the correct memory configuration, package, connectivity requirements, and MCU-family alternative before committing a design to production.

Permintaan RFG Kontak
STM32L072VZT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L072VZT6

STM32L072VZT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STM32L072VZT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M0+ core running at up to 32 MHz. It integrates 192 KB of Flash memory and 20 KB of SRAM, along with a rich set of analog and digital peripherals, making it ideal for battery-powered and energy-harvesting applications. The device is housed in a 100-pin LQFP package (LQFP100) with a 14x14 mm body and 0.5 mm pitch, offering a compact footprint for space-constrained designs. What is an ARM Cortex-M0+ microcontroller? It is a 32-bit processor core designed for ultra-low-power and cost-sensitive embedded applications. The Cortex-M0+ is the smallest and most energy-efficient ARM processor, featuring a two-stage pipeline that reduces power consumption while maintaining deterministic interrupt handling. In the system hierarchy, the STM32L072VZT6 sits at the application processor level, managing sensors, actuators, and communication interfaces, while the Cortex-M0+ core executes user firmware. This category of microcontrollers is widely used in IoT nodes, wearable devices, and industrial sensors where battery life is critical. Key features of the STM32L072VZT6 include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC, and Shutdown), a 12-bit ADC with hardware oversampling, two 12-bit DACs, a USB 2.0 full-speed device controller, and multiple communication interfaces including I2C, SPI, USART, and LPUART. The device also integrates a real-time clock (RTC) with calendar and alarm functions, and a true random number generator (RNG) for security applications. The operating voltage range is 1.8V to 3.6V, with a typical power consumption of 84 uA/MHz in Run mode and 0.29 uA in Standby mode with RTC. From a technical depth perspective, the STM32L072VZT6 is built on ST's ultra-low-power technology platform, which includes a flexible clock gating and power management scheme. The device features a 12-bit ADC with up to 16 external channels and a conversion rate of 1 Msps, along with a 12-bit DAC with output buffer. The USB controller supports battery charging detection and link power management, making it suitable for portable devices. The device also includes a hardware CRC calculation unit and a unique 96-bit ID for device identification. Typical applications include smart meters, fitness trackers, medical monitoring devices, and industrial sensor nodes. The ultra-low-power modes and rich analog peripherals make it particularly well-suited for applications that require long battery life and precise analog measurements. For example, in a smart meter, the STM32L072VZT6 can read current and voltage sensors, compute energy consumption, and communicate via wireless modules while spending most of its time in low-power sleep modes. When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor on the main VDD rail. For the VDDA analog supply, use a dedicated 1 uF capacitor and a ferrite bead to isolate digital noise. The VBAT pin should be connected to a backup battery or tied to VDD if not used. Also, ensure the BOOT0 pin is properly configured to select the desired boot mode.

Permintaan RFG Kontak