Produk (44.000+)

STM32L475RCT3 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32L475RCT3

STM32L475RCT3 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L475RCT3 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M4 processor with single-precision floating-point capability, operating at up to 80 MHz and integrating 256 KB of Flash memory. The device is offered in a 64-pin LQFP package measuring 10 mm by 10 mm and includes USB OTG and DFSDM connectivity. A microcontroller is a programmable system-on-chip that combines a processor core, memory, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. The STM32L4 family belongs to the broader embedded-controller hierarchy and is designed for low-power applications that require more processing capability than simple 8-bit or 16-bit controllers. Its Cortex-M4 architecture supports efficient digital signal processing and floating-point calculations while retaining a broad embedded software ecosystem. Three headline features distinguish the STM32L475RCT3: an 80 MHz Arm Cortex-M4 core, 256 KB of embedded Flash, and a 64-pin LQFP package. The Cortex-M4 processor includes a single-precision FPU and DSP instructions, making the MCU suitable for control algorithms, audio-oriented processing, and sensor acquisition. USB OTG expands the available host or device connectivity, while the DFSDM peripheral supports digital filtering and signal acquisition tasks. The STM32L475 device family emphasizes low-power operation without limiting real-time processing capability. At the system level, Flash provides executable program storage while the MCU integrates an Arm Cortex-M4 core, memory, communication peripherals, and low-power operating modes on one package. This consolidation reduces component count and makes the device appropriate for compact embedded systems that must process data locally while limiting energy use. Typical uses include industrial sensing, connected industrial equipment, medical monitoring devices, USB-connected data acquisition, portable instruments, and low-power edge nodes. In each case, the 80 MHz core can execute control and signal-processing functions, while low-power modes support systems that spend substantial time idle or operating intermittently. PCB implementation must preserve the 64-LQFP footprint, signal integrity, and power-delivery requirements shown in the manufacturer datasheet. Keep decoupling close to supply pins, route sensitive analog and clock signals away from fast switching nodes, and confirm toolchain, debug-probe, bootloader, and peripheral support before committing the firmware architecture. This page combines the manufacturer device specifications with practical sourcing guidance, drop-in alternatives, application guidance, and design notes. These engineering-oriented details help evaluate the STM32L475RCT3 beyond a basic catalog description and support faster design, purchasing, and assembly decisions.

Permintaan RFG Kontak
STM32L475VCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L475VCT6

STM32L475VCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L475VCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 80 MHz, 256 KB of embedded Flash memory, and a 100-lead LQFP package measuring 14 x 14 mm. It also integrates a single-precision floating-point unit, DSP instructions, USB OTG, and DFSDM capability for compact, low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L4 family belongs to the Arm Cortex-M4 microcontroller hierarchy, combining real-time control performance with low-power operation. Within this family, the STM32L475VC device targets applications requiring a balance of processing throughput, memory capacity, connectivity, and analog signal acquisition. The Cortex-M4 core operates at up to 80 MHz and supports single-precision floating-point calculations and a full set of DSP instructions. Its 256 KB Flash memory provides 256K x 8 storage, while the integrated USB OTG interface supports connected USB applications. DFSDM capability is useful for direct digital conversion of signals from sigma-delta modulators, reducing the need for separate analog front-end components. The STM32L475VCT6 combines conventional MCU processing with dedicated communication and signal-processing peripherals. USB OTG supports dual-role, device, or host-oriented designs when the board design and firmware support the required configuration. DFSDM can reduce signal-chain size in precision acquisition systems, while the Cortex-M4 DSP and FPU instructions accelerate filtering and control calculations. These features support an efficient architecture without requiring a separate DSP or communications processor. Typical uses include industrial monitoring, portable medical instruments, low-power sensor nodes, USB-connected data acquisition, embedded control systems, and consumer devices with local signal processing. The device is particularly suitable when firmware must perform control-loop work, data conditioning, and USB communication in a single microcontroller. Its 100-pin LQFP package also provides a practical choice for prototype boards and designs requiring a generous pin count. PCB implementation should preserve the LQFP-100 land pattern, power and decoupling topology, clock stability, and exposed signal-routing clearances described by the manufacturer. Use the pin-description and alternate-function tables in the manufacturer datasheet when assigning ports, communication signals, analog inputs, and debug functions. Firmware migration is simplified within supported STM32L4 toolchains, but board-level peripheral assignments still require verification against the final schematic. This page consolidates the principal device characteristics, package information, qualified drop-in alternatives, and practical design guidance into one engineering reference. It also identifies where detailed electrical limits or pin assignments must be confirmed in the official STM32L475xx datasheet before a production design is released.

Permintaan RFG Kontak
STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics
STM32L475VGT6

STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics

The STMicroelectronics STM32L475VGT6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, 1 MB of Flash, 128 KB of SRAM, and 80 MHz maximum CPU clock, housed in a 100-pin LQFP (14x14 mm) package. It targets battery-powered and energy-harvesting embedded systems where both DSP-class performance and microamp-level quiescent current are required. A microcontroller (MCU) is a single-chip integrated circuit containing a processor core, program/data memory, and programmable peripherals that govern a specific embedded function. The STM32L475VGT6 is a member of the STM32L4 ultra-low-power family, which sits within the broader STM32 32-bit MCU portfolio and is engineered around ST's 110 nm ultra-low-leakage process with adaptive real-time (ART) accelerator. The Cortex-M4 core implements the ARMv7-M architecture with single-precision FPU and DSP extensions, making the part a member of the ARM Cortex-M family that is hierarchically classed as an embedded microcontroller -> 32-bit MCU -> semiconductor IC. Key features include a wide 1.71 V to 3.6 V supply range, batch-collecting 12-bit 5 Msps ADC, two 12-bit DACs, two op-amps, two comparators, USB 2.0 OTG full-speed (with internal PHY), CAN 2.0B, SDMMC, SAI, DFSDM, multiple timers, and a true random number generator (TRNG) for security. Seven main low-power modes (Low-power Run, Sleep, Low-power Sleep, Stop 0/1/2, Standby, Shutdown) bring the typical Stop-mode current down to the microampere range and Standby/Shutdown to the nanoampere range, enabling multi-year battery life when paired with an energy-aware application design. The architecture combines the Cortex-M4 DSP+FPUs with ST's ART Accelerator (instruction cache + pre-fetch) and an MPU, allowing sustained 100 DMIPS performance while maintaining ultra-low dynamic power. An embedded voltage regulator supports dynamic voltage scaling through the PDR1 (power-down) and LP regulator paths, decoupling core voltage from the external supply. Typical applications include wearable fitness/health monitors, smart-metering and home/building automation nodes, industrial sensor hubs, medical point-of-care devices, low-power wireless IoT gateways, asset trackers, and USB-powered human-interface peripherals. The integrated USB OTG FS removes the need for an external PHY in many HID/CDC designs. When designing with the STM32L475VGT6, follow the reference manual's decoupling and layout guidance (one 100 nF per VDD pair, one bulk 4.7 uF on the regulator input) and place the HSE crystal traces within the documented loading and guard-band limits. Selecting the right low-power pair must also consider whether the application can tolerate the wake-up latency of Stop 2 / Standby modes versus the higher autonomy of Low-power Run.

USD $5,20 Kontak
STM32L476QEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics
STM32L476QEI6

STM32L476QEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L476QEI6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor operating up to 80 MHz, with 512 KB of Flash memory, 128 KB of SRAM, and a 132-pin UFBGA package measuring 7 x 7 mm. The device supports 1.8 V, 2.5 V, and 3.3 V operation, integrates an FPU, USB OTG, and LCD-oriented interfaces, and combines embedded-system performance with low-power design capabilities. An ultra-low-power microcontroller is an embedded semiconductor designed to execute firmware while minimizing energy consumption during active processing, sleep, and standby operation. The STM32L4 family belongs to the hierarchy microcontroller, embedded processor, Arm Cortex-M microcontroller, and low-power system-on-chip. This combination makes the STM32L476QEI6 suitable for compact systems where processing capability, peripheral integration, board area, and battery life must be balanced. Principal features include an 80 MHz Arm Cortex-M4 core with hardware floating-point support, 512 KB of programmable Flash, and 128 KB of SRAM. The 132-UFBGA package provides a dense 7 x 7 mm footprint for space-constrained designs. USB OTG and LCD support reduce the need for external interface controllers, while operation from 1.8 V, 2.5 V, and 3.3 V supplies allows integration with common low-voltage system rails. The Cortex-M4 architecture provides a 32-bit instruction set, deterministic interrupt handling, and efficient execution of control, communications, and signal-processing firmware. A hardware FPU accelerates floating-point calculations without relying entirely on software emulation. Integrated low-power modes are important in applications that spend substantial time idle, while the dense package supports wearable, portable, and embedded industrial products without requiring a large communications processor. Typical applications include connected sensor nodes, compact data loggers, medical monitoring equipment, industrial control modules, USB-connected portable devices, and human-interface systems with an LCD. In each case, the 512 KB Flash capacity accommodates a bootloader and embedded application, while SRAM supports working memory, protocol stacks, display buffers, and real-time control tasks. PCB design should account for the fine BGA pitch, ball assignment, exposed-pad or thermal requirements, and the placement of decoupling capacitors. Confirm the complete pin list, recommended land pattern, power-supply topology, and decoupling values in the STM32L476QE manufacturer datasheet before routing the PCB or assigning ball functions. This page consolidates the confirmed core, memory, package, interface, and sourcing characteristics into an engineering-focused product record. It also provides application guidance, selection criteria, design considerations, and a package-aware comparison framework for engineers evaluating the STM32L476QEI6 against other Arm Cortex-M4 microcontrollers.

Permintaan RFG Kontak
STM32L476RCT6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32L476RCT6

STM32L476RCT6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

STMicroelectronics STM32L476RCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and delivering up to 100 DMIPS, with 256 KB Flash memory in a 64-LQFP 10 mm × 10 mm package. It is designed for compact embedded systems that require efficient processing, low-power operation, USB connectivity, LCD support, and flexible serial peripherals. An ultra-low-power microcontroller is a semiconductor device designed to complete control, sensing, communications, and data-processing tasks while minimizing energy consumption. The STM32L4 series belongs to the STM32 32-bit MCU family and combines an Arm Cortex-M4 core with embedded Flash, SRAM, security functions, analog resources, and communication interfaces. This hierarchy makes the device suitable for industrial controls, portable instruments, connected sensors, medical equipment, and human-interface systems where both processing performance and energy efficiency matter. The STM32L476RCT6 provides 256 KB Flash, a 32-bit RISC architecture, and operation up to 80 MHz. Its integrated USB OTG full-speed interface supports USB-connected peripherals and portable systems, while its LCD interface is useful for local graphical or segmented displays. The device also supports an external switched-mode power supply configuration, as indicated by the STM32L476xx family documentation, giving designers additional options for power-system implementation. Arm Cortex-M4 architecture provides efficient instruction execution and an integrated floating-point unit for control algorithms, digital filtering, and sensor processing. The STM32L476xx family supports up to 100 DMIPS, while the STM32L476RCT6 specifically combines that processing class with 256 KB Flash in a 64-pin LQFP package. The LQFP-64 footprint exposes more peripheral and general-purpose I/O than smaller packages while remaining suitable for leaded, high-temperature assembly processes. Typical applications include industrial sensor nodes, USB-connected data loggers, portable medical monitors, energy-management equipment, LCD-equipped control panels, and connected IoT devices. The combination of an 80 MHz core, USB OTG FS, LCD support, and low-power microcontroller positioning allows one device to consolidate several functions and reduce the number of discrete components in a compact embedded design. PCB implementation should follow the manufacturer’s LQFP-64 pinout and recommended decoupling, clock, reset, and power-layout guidance. Designers should verify the exact pin assignments, peripheral alternate functions, operating-voltage limits, and startup configuration in the STM32L476xx datasheet before releasing a PCB or firmware. This product page combines package, memory, core, interface, and application information with practical comparison data for STM32L476 family alternatives. It is structured to help engineers identify the correct memory-density or temperature-grade family member while preserving the shared STM32L476RCT6 board footprint and hardware design.

Permintaan RFG Kontak
STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32L476RET6

STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics

The STMicroelectronics STM32L476RET6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 80 MHz and delivering 100 DMIPS, integrating 512 KB of Flash and 128 KB of SRAM in a 64-pin LQFP (10x10 mm) package. This device targets battery-powered and energy-harvesting applications where active-mode performance and deep-sleep current must coexist. Core peripherals include USB 2.0 Full-Speed OTG, an integrated LCD controller (8x40 or 4x44 segments), three 12-bit ADCs (5 Msps), two 12-bit DACs, two operational amplifiers, and two comparators. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripheral interfaces. The Cortex-M4 family adds a single-precision FPU and DSP extensions, and the STM32L4 sub-family is optimized for ultra-low-power operation - in the hierarchy: ARM Cortex-M4 -> 32-bit MCU -> microcontroller -> semiconductor. STM32L4 devices extend battery life through multiple low-power modes (Shutdown, Standby, Stop with RTC), a built-in SMPS for core supply, and silicon-design techniques that push Stop-mode current down to a few microamps with RTC retention. Key features include a 1.7 V to 3.6 V supply range, 12 KB SRAM available in Standby with RTC for state retention, DMA1/DMA2 controllers, up to 83 I/O ports (5V-tolerant), and AES-256 / True Random Number Generator (TRNG) hardware accelerators. The integrated SMPS supports direct Li-ion cell operation, while the Vcore domain uses an internal voltage regulator for run/low-power modes. Architecturally, the Cortex-M4 core is paired with an ART Accelerator and an instruction cache that allows near-zero-wait-state execution from Flash at full 80 MHz. The bus matrix interconnects the core, DMA, AHB/APB peripherals, and memory banks to enable parallel transfers without starving the CPU. Peripherals such as timers (16-/32-bit), I2C, SPI, USART, UART, SAI, CAN 2.0B, SDMMC, and USB OTG FS share DMA channels, minimizing CPU overhead. Typical applications include wearable fitness/health bands, industrial sensor nodes (LoRaWAN / NB-IoT), portable medical meters, e-paper / LCD IoT displays, GPS trackers, low-power wireless sensor hubs, smart home battery devices (BLE/Zigbee hosts), and USB-equipped data loggers. The wide temperature range (-40C to +85C / +105C) and high integration reduce BOM cost and PCB area in these designs. When designing with this MCU, plan the decouple network carefully: place one 100 nF X7R cap per VDD pin, a 4.7 uF bulk on the main VBAT/VDD rail, and use the optional SMPS inductor (4.7 uH, low-DCR) according to the reference layout. Always populate NRST with the 10 kohm / 100 nF reset network shown in the datasheet to avoid spurious resets on power-up. This page synthesizes verified distributor pricing, drop-in same-package alternatives from the STM32L4 family, and practical design notes not consolidated in the manufacturer datasheet. Engineers gain concise selection context for energy-aware designs where Stop-mode current and 80 MHz headroom must coexist.

Permintaan RFG Kontak
STM32L476RGT3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L476RGT3

STM32L476RGT3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L476RGT3 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M4 core, floating-point unit, 80 MHz maximum operating frequency, 1 MB of Flash memory, and 128 KB of SRAM in a 64-LQFP 10 x 10 mm package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one compact device. The STM32L4 family belongs to the hierarchy of 32-bit microcontroller, embedded processor, Arm Cortex-M microcontroller, and power management-aware embedded controller. These devices combine real-time control capabilities with low-power operating modes for industrial, consumer, medical, and connected equipment. The STM32L476RGT3 provides 100 DMIPS performance and includes USB OTG FS, LCD support, and an external switched-mode power supply option. Its 1 MB Flash supports larger embedded applications, while 128 KB of SRAM allows more complex working data. The 80 MHz Cortex-M4 core includes single-precision floating-point hardware for control loops, signal processing, and other arithmetic-intensive tasks without relying entirely on software floating-point routines. Its low-power architecture supports demanding embedded workloads while reducing energy use during idle and low-activity periods. Integrated communication and control peripherals reduce the need for external devices, making the MCU suitable for human-interface equipment, data acquisition, connected sensors, and compact industrial controllers. USB OTG FS is particularly useful for USB-connected portable products, configuration tools, and firmware update workflows. Typical uses include building automation controllers, portable medical monitors, USB data-acquisition equipment, industrial control panels, low-power sensor hubs, and connected human-interface devices. The 64-LQFP package also provides enough pins for external memories, display interfaces, analog inputs, and general-purpose I/O while remaining compatible with conventional leaded assembly and inspection processes. Designers should assign pinmuxing, clocks, low-power modes, and peripheral instances in the STM32CubeMX environment and confirm the selected peripheral pins in the manufacturer pinout and alternate-function tables. The USB data path requires careful routing and decoupling, while ADC and communications signals should be separated from noisy switching paths to improve signal integrity. This product page organizes the key MCU specifications, genuine same-package replacement options, application guidance, comparison parameters, and practical PCB design notes into one engineering-focused reference for evaluating the STM32L476RGT3.

Permintaan RFG Kontak
STM32L476RGT6 - 80MHz Cortex-M4 1MB Flash MCU | STMicroelectronics
STM32L476RGT6

STM32L476RGT6 - 80MHz Cortex-M4 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L476RGT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU running at up to 80 MHz (100 DMIPS), integrating 1 MB of Flash memory, 128 KB of SRAM, USB OTG FS, an LCD controller, and a flexible memory extension architecture, packaged in a 64-pin LQFP (10 x 10 mm) surface-mount package. An ultra-low-power microcontroller (MCU) is a complete computing system on a single chip that combines a processor core, memory, and peripherals while minimizing energy consumption. Within the power-management hierarchy, devices like the STM32L476 sit in the STM32L4 series, positioned above the STM32L0/L1 families and below the high-performance STM32F4/H7 lines, targeting battery-powered and energy-harvesting embedded systems. Key features include the Cortex-M4 with single-precision FPU and DSP instructions for efficient signal processing, six embedded SRAM banks totaling 128 KB with hardware parity checking, a ART accelerator for 0-wait-state execution from Flash, and dual-mode operation via the embedded ST-LINK-free boot loader. Dynamic efficiency is achieved through multiple low-power modes, flexible voltage scaling, and BOR-supervised operation from a 1.71 V to 3.6 V supply. The peripheral set covers USB OTG FS device/host, an 8x to 48x segment LCD driver, three 12-bit ADCs (5 MSPS), two 12-bit DACs, a DFSDM digital filter for sigma-delta modulators, multiple SPI/I2C/UART interfaces, SAI audio, CAN, Quad-SPI for external memory, AES and HASH cryptographic accelerators, an RNG, and a RTC with calendar. Typical applications include battery-powered meters and sensors, portable medical devices, IoT nodes, and human-machine interfaces with LCD displays. The combination of 1 MB Flash and ultra-low active current suits designs needing both code headroom and long battery life. Design consideration: leverage the flexible Stop mode with selectable wake-up peripherals, and budget Flash wait states versus VOS voltage scaling to balance 80 MHz performance against lowest dynamic current. This page synthesizes distributor pricing, drop-in alternatives, pin-compatibility notes, and practical design guidance not found in a single manufacturer datasheet.

Permintaan RFG Kontak
STM32L476VGT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics
STM32L476VGT6

STM32L476VGT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics

The STM32L476VGT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm® Cortex®-M4 32-bit RISC core with floating-point unit (FPU). It operates at a frequency of up to 80 MHz, delivering 100 DMIPS performance while maintaining exceptional energy efficiency. The device features 1 Mbyte of Flash memory and 128 Kbytes of SRAM, making it suitable for a wide range of battery-powered and energy-conscious applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine controllers to wearable health monitors. The STM32L476VGT6 belongs to the STM32L4 series, which is optimized for ultra-low-power operation without compromising performance, positioning it within the broader hierarchy of embedded processors and controllers. Key features of the STM32L476VGT6 include its 80 MHz Arm Cortex-M4 core with FPU, 1 MB Flash, 128 KB SRAM, and a rich set of peripherals such as USB OTG FS, LCD controller, and digital filters for sigma-delta modulators (DFSDM). It supports a wide supply voltage range from 1.71V to 3.6V, enabling direct battery operation. The device also integrates advanced low-power modes, including Sleep, Low-power Run, and Stop modes, with typical current consumption in the microamp range, extending battery life in portable applications. Technically, the STM32L476VGT6 leverages ST's proprietary ultra-low-power technology, featuring multiple power domains and dynamic voltage scaling. The FPU accelerates mathematical computations, beneficial for signal processing and control algorithms. The device includes a 12-bit ADC with hardware oversampling, multiple timers, and communication interfaces (I2C, SPI, USART, CAN, and USB). The LCD controller supports up to 8x40 segments, ideal for direct display driving without external components. Typical applications include smart meters, medical devices (e.g., glucose monitors, hearing aids), industrial sensors, and IoT edge nodes. Its ultra-low-power consumption and rich analog peripherals make it ideal for battery-operated devices that require long operational life. The 100-pin LQFP package (14x14 mm) offers a compact footprint with ample I/O for complex designs. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF bulk capacitor on the main supply. Also, utilize the low-power modes effectively by configuring the RTC and wakeup sources to minimize average current consumption.

Permintaan RFG Kontak
STM32L476ZGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L476ZGT6

STM32L476ZGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32L476ZGT6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M4 processor, up to 80 MHz operating frequency, 1 MB of Flash memory, and 128 KB of SRAM in a 144-pin LQFP package measuring 20 mm by 20 mm. It combines 100 DMIPS compute performance with USB OTG FS, LCD support, an FPU, and an external switching-mode power supply option. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one compact device. The STM32L4 family belongs to the STM32 ultra-low-power portfolio and is designed for embedded systems requiring broad peripheral connectivity, deterministic control, and low-power operation. Within that hierarchy, the Cortex-M4 core provides general-purpose embedded processing while the STM32L476 device adds extensive connectivity and low-power peripherals. Principal features include up to 80 MHz operation, 100 DMIPS performance, a single-precision hardware FPU, 1 MB of Flash, 128 KB of SRAM, and USB OTG FS connectivity. The 144-pin LQFP package exposes substantially more I/O than smaller packages, making the device suitable for systems that need parallel interfaces, multiple communication peripherals, LCD control, or a high pin count. Its 20 mm by 20 mm body also provides adequate routing space for a multilayer PCB. The Cortex-M4 architecture combines a 32-bit RISC core with DSP extensions and the hardware floating-point unit. This allows efficient control-loop execution, digital filtering, audio-oriented signal processing, and other workloads that benefit from single-precision arithmetic. At the same time, the STM32L476 family supports low-power operating modes that help reduce energy consumption during idle and active-control phases in embedded products. Typical applications include industrial control and automation equipment, human-machine interfaces with LCD displays, USB-connected data loggers, connected sensors, building-control terminals, and compact embedded systems requiring both substantial memory and a large GPIO count. USB OTG FS can support peripheral connectivity, while the LCD interface and extensive pin availability simplify designs that otherwise require additional interface controllers. PCB design should follow the manufacturer pin-definition and land-pattern guidance for the 144-pin LQFP package. Place decoupling capacitors close to the appropriate supply pins, keep sensitive analog and high-speed routing away from switching nodes, and verify that the selected external components support the device's power and clock requirements. Firmware should also be qualified for the intended operating conditions rather than validated only in a nominal laboratory setup. This page combines the official device description and datasheet characteristics with application guidance, package considerations, and same-footprint alternatives for engineers evaluating an STM32L476 design. It is intended to accelerate part selection while keeping memory, core, package, and peripheral compatibility requirements explicit.

Permintaan RFG Kontak
STM32L486JGY6TR - Ultra-low-power ARM Cortex-M4F MCU | STMicroelectronics
STM32L486JGY6TR

STM32L486JGY6TR - Ultra-low-power ARM Cortex-M4F MCU | STMicroelectronics

The STM32L486JGY6TR is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4F core with FPU, operating at up to 80 MHz. It is part of the STM32L4 series, designed for high efficiency and long battery life in a wide range of applications. The device integrates 1 Mbyte of Flash memory and 128 Kbytes of SRAM, along with a rich set of peripherals including analog, digital, and communication interfaces. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems, featuring a floating-point unit (FPU) for efficient handling of mathematical operations, and a memory protection unit (MPU) for enhanced security. The Cortex-M4F is part of the ARM Cortex-M family, which includes the M0, M0+, M3, M4, and M7 cores, each offering different performance and power trade-offs. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, enabling it to control electronic systems in applications ranging from consumer electronics to industrial automation. Key features of the STM32L486JGY6TR include its ultra-low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown), which are critical for battery-powered devices. It also features a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and operational amplifiers. The device supports multiple communication interfaces: I2C, SPI, USART, UART, LPUART, SAI, CAN, USB OTG FS, and SDMMC. Additionally, it includes a true random number generator (TRNG), a CRC calculation unit, and a 96-bit unique ID. The STM32L486JGY6TR is manufactured using ST's 40nm process technology, which contributes to its low power consumption. The core operates at 1.8V to 3.6V, with a wide temperature range of -40°C to +85°C. The device is available in a 73-ball WLCSP package (0.4mm pitch), making it suitable for space-constrained designs. The package is lead-free and RoHS compliant. Typical applications include wearable devices, smart sensors, medical monitoring equipment, industrial sensors, and IoT edge nodes. The ultra-low-power modes and rich analog peripherals make it ideal for battery-operated devices that require long operational life. For example, in a wearable health monitor, the STM32L486JGY6TR can sample sensor data, process it with the FPU, and communicate via BLE (through an external module) while consuming minimal power. When designing with this device, pay attention to the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 1uF capacitor on the main supply. Also, use the low-power modes effectively by configuring the RTC and wake-up sources to maximize battery life. The device supports a wide range of development tools, including STM32CubeMX and STM32CubeIDE, which simplify configuration and code generation.

Permintaan RFG Kontak
STM32L486QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L486QGI6

STM32L486QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32L486QGI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz and integrating 1 MB of Flash memory in a 132-pin UFBGA (7 x 7 mm) package. Its key headline specifications are an 80 MHz maximum core frequency, 1 MB of Flash storage, and a compact 132-UFBGA package. A microcontroller is a programmable semiconductor that combines a processor core, embedded Flash, RAM, peripherals, and communication interfaces into one device. The STM32L4 family belongs to the broader embedded-processing hierarchy: microcontroller -> 32-bit RISC microcontroller -> Arm Cortex-M microcontroller -> STM32L4 series. This integration allows an equipment designer to execute firmware, acquire data, control peripherals, and communicate with external systems without using separate memory and logic devices. The STM32L486QGI6 combines an Arm Cortex-M4 processor with an FPU, according to the verified Mouser product listing. Its 1 MB Flash configuration provides substantially more program storage than smaller STM32L4 variants and is suitable for complex control firmware, protocol stacks, data acquisition routines, and embedded user interfaces. The manufacturer identifies the STM32L486xx family as an ultra-low-power MCU platform designed for applications where energy efficiency and processing capability are both important. Verified distributor information identifies LCD support, USB OTG, and AES functionality for this device family. These capabilities make the MCU relevant to compact industrial controllers, USB-connected sensors, secure access terminals, and embedded human-machine-interface systems. The target order code is supplied in a 132-UFBGA tray package according to Arrow Electronics, while the exact memory, voltage, and temperature details not present in the verified source extracts remain designated for additional datasheet confirmation. The principal design consideration is package-level planning. A 132-UFBGA device requires a dense multilayer PCB, fine-pitch ball placement, controlled escape routing, and assembly capability suited to BGA packages. Designers must follow STMicroelectronics land-pattern, routing, solder-mask, and thermal guidance rather than adapting a generic QFN layout. Although the 7 x 7 mm package is compact, its 132 balls create a substantially more demanding manufacturing process than a leaded package. This product page consolidates verified manufacturer and distributor information into a technical sourcing reference. It combines the exact 80 MHz, 1 MB Flash, 132-UFBGA, voltage, packaging, and price attributes with drop-in-family alternatives, interface-focused applications, and package-aware engineering guidance that should be checked against the complete manufacturer datasheet before schematic release.

Permintaan RFG Kontak
STM32L486RGT6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics
STM32L486RGT6

STM32L486RGT6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics

The STMicroelectronics STM32L486RGT6 is a high-performance, ultra-low-power ARM Cortex-M4F microcontroller with floating-point unit (FPU) and DSP instructions, operating at up to 80 MHz. It is part of the STM32L4 series, designed for applications requiring low power consumption without compromising performance. The device features 1 Mbyte of Flash memory and 128 Kbytes of SRAM, along with a rich set of peripherals including analog, digital, and communication interfaces. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core from ARM Holdings that includes a floating-point unit (FPU) for hardware-accelerated single-precision math, and DSP instructions for signal processing. In the system hierarchy, it sits as the central processing unit (CPU) within a microcontroller (MCU), which integrates memory, peripherals, and I/O on a single chip. The Cortex-M4F is widely used in embedded systems where a balance of performance, power efficiency, and cost is required, such as in IoT devices, industrial control, and consumer electronics. Key features of the STM32L486RGT6 include: 1 Mbyte Flash, 128 Kbytes SRAM, 80 MHz CPU, ultra-low-power modes (down to 100 nA in shutdown), a 12-bit ADC with 5 Msps, a 12-bit DAC, multiple timers, and communication interfaces including USART, SPI, I2C, USB OTG FS, CAN, and SDMMC. It also integrates a hardware cryptographic accelerator (AES, DES, 3DES) and a true random number generator (TRNG) for security applications. The STM32L486RGT6 is built on ST's ultra-low-power technology, featuring multiple power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown) that allow designers to optimize energy consumption. The device operates from 1.71V to 3.6V supply, making it suitable for battery-powered applications. Its advanced analog peripherals, including op-amps and comparators, enable sensor signal conditioning without external components. Typical applications include smart meters, medical devices, wearable fitness trackers, industrial sensors, and IoT edge nodes. The combination of low power, high performance, and security features makes it ideal for applications that require long battery life and secure data handling. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF bulk capacitor. For low-power modes, configure the clock source and voltage regulator appropriately to achieve the desired current consumption. The STM32L4 series offers a comprehensive set of development tools, including STM32CubeMX and STM32CubeIDE, which simplify configuration and code generation.

Permintaan RFG Kontak
STM32L486RGT7 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L486RGT7

STM32L486RGT7 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L486RGT7 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating at up to 80 MHz, with 1 MB of Flash memory, USB OTG, AES-256, DFSDM, LCD support, and 64-LQFP (10 x 10 mm) packaging. The device combines 100 DMIPS-class processing performance with a broad set of low-power peripherals for embedded control, communications, sensing, and human-interface applications. An ultra-low-power microcontroller is a semiconductor device designed to conserve energy while executing control workloads between periods of active processing. The STM32L4 product family belongs to the MCU hierarchy, combines an Arm Cortex-M processor core with embedded Flash, SRAM, timers, communication peripherals, and low-power features, and supports both real-time control and connected embedded-product designs. The STM32L486RGT7 also integrates a floating-point unit for efficient arithmetic in control, audio, and signal-processing workloads. Key features include an Arm Cortex-M4 32-bit RISC core operating up to 80 MHz, 1 MB of Flash memory, 100 DMIPS processing performance, a single-precision FPU, and hardware AES-256 encryption. USB OTG expands the peripheral set for USB-connected data acquisition, configuration, or control interfaces. DFSDM supports digital-filtering and sigma-delta conversion workflows, while the LCD interface extends the device toward display-oriented embedded products. The STM32L486 architecture combines a 32-bit RISC processor, direct-memory-access capabilities, nested-vectored interrupt handling, and extensive peripheral integration. Its USB interface, digital filters, cryptographic accelerator, and display support reduce the need for external components in connected sensing systems. The 64-LQFP package provides a conventional leaded footprint with accessible pins for programming, communication, mixed-signal inputs, and general-purpose control. Typical applications include industrial sensor hubs, USB-connected test instruments, low-power industrial controllers, portable medical or laboratory equipment, compact human-interface systems, and secure embedded gateways. The combination of 80 MHz processing, 1 MB Flash, FPU, USB OTG, AES-256, DFSDM, and LCD support allows a single device to combine real-time acquisition, local processing, secure data transfer, and user-interface functions. PCB design should preserve the pin assignments and power requirements specified by the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route sensitive analog and communication signals away from high-switching-current paths, and confirm the exposed programming and debug interface requirements before releasing the layout. Firmware, peripheral configuration, clock settings, and USB enumeration must also be validated on the assembled board. This page organizes the core MCU specifications, package information, sourcing workflow, and design guidance for engineers evaluating the STM32L486RGT7. It also identifies same-family drop-in candidates while making clear where memory capacity, temperature grade, or peripheral differences require engineering review before substitution.

Permintaan RFG Kontak
STM32L486VGT6 - ARM Cortex-M4F MCU 1MB Flash | STMicroelectronics
STM32L486VGT6

STM32L486VGT6 - ARM Cortex-M4F MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32L486VGT6 is a high-performance, ultra-low-power ARM Cortex-M4F based microcontroller with 1MB of Flash memory and 128KB of SRAM, packaged in a 100-pin LQFP (VGT6 suffix). It operates at a maximum frequency of 80 MHz, delivering 100 DMIPS with DSP instructions and a hardware floating-point unit (FPU) for signal processing and control applications. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems that require a balance of performance, energy efficiency, and advanced digital signal processing. The Cortex-M4F includes a single-precision FPU and DSP instructions, making it suitable for applications involving real-time control, sensor fusion, and audio processing. In the system hierarchy, it sits above simple 8-bit MCUs but below application processors, offering deterministic real-time behavior with low power consumption. Key features of the STM32L486VGT6 include an ultra-low-power mode with 100 nA shutdown current, a 12-bit ADC with 5 MSPS, two 12-bit DACs, multiple communication interfaces (USART, SPI, I2C, USB OTG FS, CAN, SAI), and a true random number generator (TRNG). It also integrates a cryptographic acceleration unit (AES, DES, and hash) for secure applications. The device supports a wide supply voltage range of 1.71V to 3.6V, making it ideal for battery-powered devices. The STM32L486VGT6 is built on ST's ultra-low-power technology, featuring multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop 2, Standby, Shutdown) that allow designers to optimize energy consumption. The FlexPowerControl feature enables independent power domains for the core, I/Os, and backup domain, providing flexibility in power management. The device also includes a 32-bit low-power timer, a real-time clock (RTC) with calendar, and a touch sensing controller. Typical applications include industrial sensors, smart meters, medical devices, wearable electronics, and IoT nodes. Its combination of low power, high performance, and rich peripherals makes it suitable for applications requiring long battery life without compromising on processing capability. For example, in a smart meter, the STM32L486VGT6 can handle metrology calculations, communication protocols, and display control while maintaining low average power consumption. When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor at the main supply. For low-power operation, configure unused GPIOs as analog inputs to avoid leakage currents. The device supports in-application programming (IAP) and in-circuit programming (ICP) via SWD or JTAG, facilitating firmware updates in the field.

Permintaan RFG Kontak
STM32L486ZGT3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L486ZGT3

STM32L486ZGT3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

STMicroelectronics STM32L486ZGT3 is an ultra-low-power Arm Cortex-M4 32-bit RISC microcontroller operating up to 80 MHz, with 1 MB of flash memory and a 144-pin LQFP 20 x 20 mm package. The device is configured for 1.8 V, 2.5 V, or 3.3 V operation and includes an FPU, LCD support, USB OTG, and AES capability. A microcontroller is a programmable system-on-chip containing a processor core, memory, and peripherals on one package. The STM32L4 family belongs to the broader hierarchy of embedded processors, 32-bit microcontrollers, and low-power embedded systems. STM32L486 devices combine general-purpose control performance with energy-oriented features suited to battery-powered, industrial, sensing, communications, and human-interface applications. Three headline characteristics define this particular device. Its Arm Cortex-M4 processor supports 32-bit execution at up to 80 MHz, while the single-bank 1 MB flash arrangement provides room for application code and firmware updates. Its 144-lead LQFP package exposes a broad set of GPIO and peripheral connections while supporting automated board assembly. The STM32L486 platform also provides USB OTG, AES, LCD, and floating-point features identified in the verified product and distributor information. The exact RAM capacity, operating-temperature limits, supply-current figures, ADC characteristics, timer counts, and detailed peripheral inventory were not included in the supplied verified excerpts. Those values remain intentionally unspecified in the specification table rather than being inferred from related devices. The available data instead confirms the device family’s ultra-low-power positioning and the target part’s 80 MHz maximum frequency, 1 MB flash configuration, USB OTG support, LCD support, and AES capability. Typical uses include industrial sensor controllers, compact data acquisition equipment, USB-connected peripherals, low-power instrumentation, LCD-equipped human-interface panels, and embedded communications equipment. The 144-pin package makes the MCU appropriate when a design needs numerous discrete signals rather than a small microcontroller with only a few exposed pins. Engineering designs must verify the exact pin functions, alternate-function mappings, decoupling requirements, clock tree, and peripheral electrical limits against the official STM32L486ZG documentation before layout release. Pin multiplexing also requires a consistent allocation across USB, LCD, debug, communications, and general-purpose I/O. Power sequencing and exposed 144-lead assembly demand careful board-level thermal and contamination controls. This page consolidates the verified manufacturer identity, package, core, memory, interface, voltage, and sourcing information into an engineering-oriented resource. It also identifies where drop-in family alternatives require firmware, feature, and peripheral verification rather than assuming that a shared package guarantees complete behavioral equivalence.

Permintaan RFG Kontak
STM32L496AEI6 - 80MHz Cortex-M4 512KB Flash MCU | STMicroelectronics
STM32L496AEI6

STM32L496AEI6 - 80MHz Cortex-M4 512KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L496AEI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU operating up to 80 MHz (100 DMIPS), integrating 512 KB of embedded Flash and 320 KB of SRAM in a 169-ball UFBGA (7x7 mm) package. It runs from a 1.71 V to 3.6 V supply and offers a -40 °C to 85 °C industrial temperature range. A microcontroller (MCU) is a single silicon device that bundles a CPU core, program memory, working RAM and a rich set of peripherals onto one package. In the power-management hierarchy an MCU belongs to the embedded processing family, sitting above simple 8-bit controllers and alongside DSP, FPGA and application-processor alternatives. The STM32L4 series is defined by ST's FlexPowerControl architecture, which keeps standby, shutdown and low-power-run currents at tens to hundreds of nanoamperes while retaining full Cortex-M4 performance. Key differentiators of the STM32L496AEI6 include 320 nA consumption in VBAT mode for RTC and 32 backup registers, a 25 nA shutdown mode with 5 wake-up pins, and a suite of integrated connectivity: USB OTG full-speed with crystal-less support, audio interfaces (SAI, I2S, SAI), crypto accelerators (AES, HASH, RNG), and support for external switched-mode power supplies through the SMPS pin. A 12-bit ADC, dual DAC and comparators round out the analog peripherals. Architecturally, the device combines a 4.17 MHz Cortex-M4 core with a flexible power scaler, multiple low-power modes, an LCD segment/display controller, and up to 108 I/O in the 169-ball option. Memory is organized with 320 KB of SRAM split across SRAM1/SRAM2, plus a 4 KB backup SRAM, while the 512 KB Flash supports dual-bank execution for in-field firmware updates. Typical applications include battery-powered IoT and wearable sensor nodes, low-power industrial data loggers, USB-connected portable instruments, compact audio players and USB-C PD accessory controllers, and medical monitoring devices where standby current dominates the power budget. When designing around this part, note that the 169-ball UFBGA footprint requires fine-pitch BGA assembly and careful via-in-pad layout; plan for a via array under the ball field to improve thermal and electrical performance, and confirm the SWD debug and bootloader access pins remain routable on a dense 7x7 mm land pattern. This page consolidates distributor availability, package details, same-package drop-in alternatives, and practical design notes that are not found together in the original manufacturer datasheet, giving engineers a single reference for sourcing and design decisions.

Permintaan RFG Kontak
STM32L496AGI3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L496AGI3

STM32L496AGI3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

STMicroelectronics STM32L496AGI3 is an ultra-low-power, 32-bit Arm Cortex-M4 microcontroller operating up to 80 MHz, with 1 MB of Flash memory and a 169-ball UFBGA package measuring 7 mm by 7 mm. The device combines a high-performance 32-bit RISC core, an integrated floating-point unit, USB OTG, LCD support, and DFSD capability in a compact package designed for low-power embedded systems. An ultra-low-power microcontroller is an integrated circuit that executes embedded control functions while minimizing energy consumption during active operation and low-power modes. The STM32L4 family belongs to the microcontroller hierarchy, combining a real-time processor core with memory, communications peripherals, timers, analog interfaces, and power-management functions. Its role is to sample inputs, execute control algorithms, manage connected peripherals, and provide deterministic embedded processing within one compact device. The principal specifications are an 80 MHz Arm Cortex-M4 core, 1 MB of Flash memory, and operation from a 3.3 V supply. The Cortex-M4 architecture supports 32-bit processing and floating-point instructions, making the device suitable for control workloads that benefit from efficient numerical computation. Additional listed capabilities include USB OTG, an LCD interface, and DFSD support, broadening its usefulness beyond basic digital control. The STM32L496AGI3 combines substantial Flash capacity with a relatively small 169-UFBGA land pattern. Its 32-bit architecture, integrated floating-point unit, and peripheral set allow software-driven motor, communications, user-interface, and industrial-control functions to be consolidated into one device. The 80 MHz operating rate provides additional compute headroom for interrupt-heavy control loops and protocol processing while the ultra-low-power positioning supports designs where energy efficiency is a primary requirement. Typical applications include industrial sensor controllers, USB-connected data-acquisition equipment, compact human-machine interfaces, digital control modules, communications equipment, and low-power embedded platforms. The 1 MB Flash capacity supports larger firmware images, while USB OTG, LCD support, and DFSD address common connectivity, display, and data-storage requirements without requiring several discrete interface controllers. PCB planning must account for the 169-ball UFBGA geometry, high-density escape routing, via access, and thermal performance. Place decoupling capacitors close to the appropriate supply pins, preserve a continuous ground reference beneath the device where layout rules allow, and validate the complete stack-up and footprint against the manufacturer package drawing. Firmware and peripheral assignments should be confirmed through the STM32L496AG product documentation.

Permintaan RFG Kontak
STM32L496AGI6 - 80MHz Cortex-M4F 1MB MCU | STMicroelectronics
STM32L496AGI6

STM32L496AGI6 - 80MHz Cortex-M4F 1MB MCU | STMicroelectronics

STMicroelectronics STM32L496AGI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, 80 MHz maximum operating frequency, 1 MB Flash memory, and a 169-UFBGA 7 x 7 mm package. It operates from a 1.71 V to 3.6 V supply and combines USB OTG FS, LCD, DFSD, audio, HASH, and external SMPS support according to the manufacturer datasheet. The STM32L496AGI6 is suitable for industrial embedded systems, low-power data acquisition, compact user interfaces, USB-connected controls, and secure-connected equipment. An ultra-low-power microcontroller is an embedded semiconductor that combines a processor core, memory, peripherals, and low-power operating modes in one integrated circuit. The STM32L4 family belongs to the Arm Cortex-M microcontroller hierarchy and uses the Cortex-M4F core, which adds single-precision floating-point instructions for control, signal-processing, and sensor workloads. Its low-power architecture supports battery-powered and energy-conscious designs without requiring a separate high-performance processor. The principal device features include 100 DMIPS class performance, up to 1 MB of Flash, 320 KB of SRAM, USB OTG FS, an Arm Cortex-M4F CPU with FPU, and FlexPowerControl low-power operation. Backup-domain operation retains RTC-related functionality and 32 x 32-bit backup registers with a VBAT supply current of 320 nA. Shutdown mode consumes 25 nA and supports five wake-up sources, making the MCU applicable to compact instruments and long-life battery equipment. The STM32L496AGI6 combines substantial compute and peripheral capability with a 1.71 V minimum operating voltage. This allows designers to use 3.3 V supplies directly while supporting lower-voltage power domains. Its integrated connectivity and security-oriented peripherals can reduce external component count in USB, display, storage, and authenticated data-processing designs. Exact pin assignments, peripheral availability, and operating limits must be confirmed against the STM32L496xx manufacturer datasheet before schematic capture. Typical applications include industrial sensor hubs, portable medical and laboratory instruments, USB OTG data loggers, compact human-machine interfaces, low-power edge nodes, and audio-capable embedded controls. The USB OTG FS interface is useful for configuration and data transfer, while LCD support and DFSD capability suit display-oriented and removable-storage designs. For designs requiring Ethernet, industrial communication, or low-power wireless links, the companion transceiver or radio must be selected separately. PCB planning should account for the 169-UFBGA 7 x 7 mm land pattern, exposed-pad thermal requirements, decoupling, signal integrity, and manufacturing capabilities. Place input and bulk decoupling capacitors close to the supply pins, preserve a low-impedance return path beneath the device where supported by the package drawing, and validate the escape-routing strategy before high-volume release. Firmware, boot configuration, supply sequencing, and peripheral pin multiplexing must also match the device variant and package. This product record combines manufacturer datasheet facts, distributor availability and pricing information, package constraints, application guidance, and a strict drop-in alternative assessment. That engineering-focused synthesis helps distinguish electrical capability from true PCB-level replacement suitability and identifies where procurement data or pin-level validation remains necessary.

Permintaan RFG Kontak
STM32L496QEI6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32L496QEI6

STM32L496QEI6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L496QEI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a maximum clock frequency of 80 MHz, 512 KB of embedded Flash memory, and a 132-UFBGA 7 x 7 mm package. Designed for energy-sensitive embedded systems, it combines real-time processing capability with integrated connectivity, security, and low-power features. The verified distributor data identifies a single-core Cortex-M4 architecture and USB OTG, LCD, and DSP-related capabilities. Its combination of performance, memory, and package density suits compact industrial controllers, connected sensors, human-interface systems, and low-power edge devices. An ultra-low-power microcontroller is a semiconductor device designed to complete control, sensing, communications, and data-processing tasks while minimizing energy consumption. The STM32L496 belongs to the STM32L4 family of low-power microcontrollers, combining a high-performance Arm Cortex-M4 core with peripherals for security, connectivity, analog measurement, timing, and human-machine-interface functions. This places it within the embedded-processing hierarchy: microcontroller, 32-bit RISC processor, semiconductor, and embedded-control platform. Key verified features include an 80 MHz Arm Cortex-M4 core, 512 KB Flash, a 132-UFBGA package, and ultra-low-power positioning. Distributor listings also identify USB OTG and LCD support, while the STMicroelectronics product family page describes the STM32L496xx devices as ultra-low-power Cortex-M4 MCUs operating up to 80 MHz. These features make the device suitable when an engineer needs substantial processing performance without moving to a larger general-purpose MCU architecture. The STM32L496QEI6 is manufactured in a 132-UFBGA 7 x 7 mm package, requiring careful PCB layout, fine-pitch routing, and assembly validation. Unlike a simple through-hole microcontroller, its dense package can reduce board area but increases sensitivity to solderability, via placement, thermal performance, and manufacturing capability. A complete design should follow the manufacturer pinout, recommended land pattern, decoupling strategy, and PCB guidelines in the STM32L496 documentation. Typical applications include industrial control and automation, USB-connected data acquisition, low-power sensor nodes, LCD-equipped user interfaces, building and energy systems, and compact embedded products. For battery- or energy-harvesting designs, the STM32L496 family is attractive because its low-power architecture can reduce the energy required between task wake-ups. The exact low-power current figures and peripheral specifications should be confirmed in the manufacturer datasheet before final design sign-off. A key design consideration is package and power-rail integrity. Place all required decoupling capacitors close to the device supply pins, route sensitive signals away from high-current switching paths, and preserve the manufacturer-defined exposed-pad and thermal layout. Verify pin multiplexing, alternate-function conflicts, clock configuration, USB requirements, and firmware support before releasing a PCB for production. This page combines verified distributor information with engineering guidance intended to make the STM32L496QEI6 selection process more transparent.

Permintaan RFG Kontak
STM32L496QGI3 - 80MHz 1MB Cortex-M4 MCU | STMicroelectronics
STM32L496QGI3

STM32L496QGI3 - 80MHz 1MB Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L496QGI3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, operating up to 80 MHz, with up to 1 MB Flash and 320 KB SRAM in a 132-UFBGA 7 x 7 mm package. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces into one component. In the hierarchy, STM32L496QGI3 is an Arm Cortex-M4 MCU, an embedded microcontroller, and a semiconductor within the broader STM32L4 family. Its combination of processing performance, low-power modes, and extensive connectivity supports compact embedded systems. Key features include an Arm Cortex-M4 processor with FPU, 100 DMIPS performance, 1 MB Flash, and 320 KB SRAM. The device also supports USB OTG FS, audio, HASH, and an external SMPS. Its operating supply range is 1.71 V to 3.6 V, while the documented temperature options span -40 °C to 85 °C, 105 °C, or 125 °C, depending on the ordering variant. The STM32L496 architecture combines a high-performance 32-bit RISC core with low-power FlexPowerControl operating modes. Low-power behavior includes 320 nA in VBAT mode for the RTC and 32 x 32-bit backup registers, plus 25 nA shutdown consumption with five wakeup pins. These characteristics suit battery-operated and always-on products where standby current matters as much as active processing speed. Typical uses include industrial control, USB-connected data acquisition, human-interface equipment, sensor hubs, portable instruments, and low-power embedded gateways. The USB OTG FS interface can simplify host or device connectivity, while the large memory footprint supports firmware, data buffering, and application logic. The external SMPS option is useful when system power architecture requires more flexibility than a fixed internal regulator arrangement. For PCB design, use the manufacturer pin and package guidance for the 132-UFBGA land pattern, and verify ball assignments before routing. Decoupling, ground-plane continuity, and high-speed signal return paths are critical because a compact BGA package leaves limited routing space. Confirm the exact peripheral pin multiplexing, power sequencing, and exposed-pad connection from the manufacturer datasheet. This product page combines verified distributor identification and manufacturer datasheet specifications with package, sourcing, and design context. It is intended to help engineers compare the STM32L496QGI3 with same-package alternatives and plan a compliant, thermally sound implementation without treating unrelated MCUs as drop-in replacements.

Permintaan RFG Kontak
STM32L496RGT3 - Ultra-Low-Power ARM Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics
STM32L496RGT3

STM32L496RGT3 - Ultra-Low-Power ARM Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics

The STMicroelectronics STM32L496RGT3 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU operating up to 80 MHz (100 DMIPS), integrating 1 MB of Flash and 320 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It supports a wide 1.71 V to 3.6 V supply range with FlexPowerControl, delivering 320 nA VBAT mode current for RTC and backup registers, and 25 nA Shutdown mode current with 5 wakeup pins. An ultra-low-power microcontroller (MCU) is a class of microcontrollers engineered to minimize active and standby power consumption, typically using sub-threshold transistor design, multiple low-power modes (Sleep, Stop, Standby, Shutdown), and integrated DC-DC converters. The STM32L4 family sits in the broader hierarchy of ARM Cortex-M microcontrollers (Cortex-M0/M0+/M3/M4/M7/M33) under the STMicroelectronics STM32 product line, which serves industrial, IoT, medical, and consumer embedded applications where battery life is critical. Key features of the STM32L496RGT3 include the Cortex-M4 core with single-precision FPU and DSP instructions, 1 MB Flash and 320 KB SRAM, integrated USB OTG FS, an LCD-TFT controller (8x40 or 4x44 with step-up), AES-256 hardware encryption, a true random number generator (TRNG), DFSDM (digital filter for sigma-delta modulators), and an external SMPS support interface for direct connection to an integrated switching mode power supply. The architecture combines an ART Accelerator (Adaptive Real-Time memory accelerator) for 0-wait-state execution from Flash, a Chrom-ART Accelerator for 2D graphics offload, and 12-bit ADC and DAC peripherals. The 80 MHz Cortex-M4 core delivers 100 DMIPS / 273 CoreMark performance while the L4 series achieves an industry-leading ULPBench score of 245, reflecting its ultra-low-power efficiency. Typical applications include wearable health devices, smart sensors, industrial HMI panels with LCD displays, USB-powered portable instruments, secure IoT endpoints with AES-256, low-power RF transceivers, and battery-backed metering systems. The 64-pin LQFP package provides ample GPIO and is suitable for hand-solderable prototypes. When designing with the STM32L496RGT3, select the appropriate low-power mode per the application duty cycle (Shutdown for idle months, Stop for sub-second wake, Standby for RTC-only operation), and follow ST's AN4621 reference for SMPS external inductor selection. The QFP64 footprint enables easy migration to other STM32L4-series devices in the same package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Engineers should cross-check the QFP64 pinout against the STM32L496RG reference manual (RM0354) before board bring-up.

Permintaan RFG Kontak
STM32L496RGT6 - 80MHz Cortex-M4 MCU, 1MB Flash | STMicroelectronics
STM32L496RGT6

STM32L496RGT6 - 80MHz Cortex-M4 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32L496RGT6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 80 MHz (100 DMIPS) and integrating 1 MB of Flash memory and 320 KB of SRAM in a 64-pin LQFP (10x10 mm) package. The device targets battery-powered and always-on applications where microamp sleep currents and a 1.71 V to 3.6 V supply range are decisive design constraints. An ultra-low-power microcontroller (MCU) is a single-chip embedded processor that combines a CPU core, non-volatile Flash memory, SRAM, and a rich set of analog and digital peripherals, optimized for minimal energy consumption. Within the power-management hierarchy of embedded systems, MCUs such as the STM32L4 series sit at the application-control layer, executing user firmware while managing sensors, displays, and connectivity with microamp-scale sleep currents. They are commonly contrasted with general-purpose Cortex-M parts and with low-power variants from competing vendors such as NXP, Microchip, and Renesas. Key features include ST's FlexPowerControl with 320 nA in VBAT mode and 25 nA Shutdown mode (5 wakeup pins), USB OTG Full-Speed, an integrated LCD controller (segment LCD up to 8x40), DFSDM (digital filter for sigma-delta modulators), hardware AES-256 and a HASH accelerator, and support for an external SMPS to reduce core dynamic power. Analog peripherals include a 12-bit ADC, 12-bit DAC, comparators, and operational amplifiers. Technically, the Cortex-M4 with single-precision FPU and DSP instructions executes DSP-heavy workloads such as audio filtering and sensor fusion, while the proprietary ART Accelerator (Adaptive Real-Time) keeps the 80 MHz core fed from Flash with zero-wait-state access for most code paths. The peripheral set includes multiple USART/UART, SPI, I2C, CAN, timers, 16-channel 12-bit ADC, DAC, comparators, op-amps, and low-power timers, plus the integrated DFSDM for high-resolution sigma-delta input chains. Typical applications include battery-powered metering, IoT sensor nodes, portable medical and wearable devices, industrial sensor transmitters, and consumer products with segment LCD displays. The combination of USB OTG, LCD, and DFSDM gives it particular traction in mid-tier IoT endpoints and handheld instrumentation. For design, leverage the DFSDM with external sigma-delta modulators for 16+ bit effective sensing, and size the power supply for the 100 mA-class peak core plus USB load currents. Use ST's STM32CubeMX and STM32CubeIDE plus the HAL/LL drivers to configure the ultra-low-power modes, and reserve PCB area for an optional external SMPS inductor. The 64-LQFP footprint is shared across the STM32L4 family, easing pin-compatible upgrades to higher-density variants such as the STM32L496ZGT6 (144-LQFP). This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
STM32L496VET6 - 80MHz 512KB Cortex-M4 | STMicroelectronics
STM32L496VET6

STM32L496VET6 - 80MHz 512KB Cortex-M4 | STMicroelectronics

The STMicroelectronics STM32L496VET6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor with FPU, operating up to 80 MHz. It provides 512 KB of Flash memory, USB OTG FS connectivity, LCD support, audio peripherals, HASH capability, and external SMPS support in a 100-pin LQFP package measuring 14 x 14 mm. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one compact device. The STM32L4 family belongs to the embedded-processing hierarchy of 32-bit MCU, Arm Cortex-M core, RISC processor, and embedded semiconductor. Its combination of processing performance and low-power operating modes suits products that need local control, communications, data acquisition, and user-interface support without a separate processor. Key features include an 80 MHz Arm Cortex-M4 core with FPU, 512 KB of Flash, a 1.71 V to 3.6 V operating supply range, and FlexPowerControl for low-power operation. The device also supports USB OTG FS, 12-bit ADC channels, LCD interfaces, audio functions, HASH, and external switched-mode power-supply support. These resources consolidate several embedded functions into one package while reducing external component count. The STM32L496VET6 provides up to 100 DMIPS through the STM32L496xx architecture. Its low-power modes are important for battery-operated and intermittently powered equipment: shutdown consumption reaches 25 nA, while VBAT mode consumes 320 nA while maintaining RTC operation and 32 x 32-bit backup registers. The processor's FPU accelerates floating-point calculations used in control loops, signal processing, and data formatting without requiring a separate DSP. Typical applications include industrial sensor controllers, USB-connected data-acquisition equipment, LCD-equipped human-interface panels, low-power edge instruments, portable measurement products, and compact embedded control systems. USB OTG FS is particularly useful for configuration, data transfer, and USB-hosted peripheral connectivity, while the LCD and audio interfaces support human-facing products. Design the power tree around the 1.71 V to 3.6 V operating range and account for startup, sleep, and shutdown current when estimating battery life. Place decoupling capacitors close to the supply pins, route USB differential signals with controlled impedance, and consult the manufacturer pin-definition table before assigning every 100-pin LQFP connection. This product page combines the manufacturer's core electrical specifications, package details, application guidance, qualified same-family alternatives, and practical PCB considerations. It supports faster part selection by organizing memory, core performance, low-power modes, interface capabilities, and replacement considerations in one engineering-focused reference.

Permintaan RFG Kontak