STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics
MPN: STM32L475VGT6 ✓ AktifSTM32L475VGT6 Ringkasan
A microcontroller (MCU) is a single-chip integrated circuit containing a processor core, program/data memory, and programmable peripherals that govern a specific embedded function. The STM32L475VGT6 is a member of the STM32L4 ultra-low-power family, which sits within the broader STM32 32-bit MCU portfolio and is engineered around ST's 110 nm ultra-low-leakage process with adaptive real-time (ART) accelerator. The Cortex-M4 core implements the ARMv7-M architecture with single-precision FPU and DSP extensions, making the part a member of the ARM Cortex-M family that is hierarchically classed as an embedded microcontroller -> 32-bit MCU -> semiconductor IC.
Key features include a wide 1.71 V to 3.6 V supply range, batch-collecting 12-bit 5 Msps ADC, two 12-bit DACs, two op-amps, two comparators, USB 2.0 OTG full-speed (with internal PHY), CAN 2.0B, SDMMC, SAI, DFSDM, multiple timers, and a true random number generator (TRNG) for security. Seven main low-power modes (Low-power Run, Sleep, Low-power Sleep, Stop 0/1/2, Standby, Shutdown) bring the typical Stop-mode current down to the microampere range and Standby/Shutdown to the nanoampere range, enabling multi-year battery life when paired with an energy-aware application design.
The architecture combines the Cortex-M4 DSP+FPUs with ST's ART Accelerator (instruction cache + pre-fetch) and an MPU, allowing sustained 100 DMIPS performance while maintaining ultra-low dynamic power. An embedded voltage regulator supports dynamic voltage scaling through the PDR1 (power-down) and LP regulator paths, decoupling core voltage from the external supply.
Typical applications include wearable fitness/health monitors, smart-metering and home/building automation nodes, industrial sensor hubs, medical point-of-care devices, low-power wireless IoT gateways, asset trackers, and USB-powered human-interface peripherals. The integrated USB OTG FS removes the need for an external PHY in many HID/CDC designs.
When designing with the STM32L475VGT6, follow the reference manual's decoupling and layout guidance (one 100 nF per VDD pair, one bulk 4.7 uF on the regulator input) and place the HSE crystal traces within the documented loading and guard-band limits. Selecting the right low-power pair must also consider whether the application can tolerate the wake-up latency of Stop 2 / Standby modes versus the higher autonomy of Low-power Run.
Alternatif penggantian untuk STM32L475VGT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32L475VGT6 (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Core Architecture, DAC, USB.
STM32L476VGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32L471ZGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32L496RGT6
✅ Drop-InKontak untuk harga
Lihat Datasheet →GD32F450VGT6
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
GD32F470VGT6
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32L475VGT6 Rating Maksimal & Karakteristik Listrik
| Core Architecture | ARM Cortex-M4 with FPU (32-bit) |
| Maximum CPU Clock | 80 MHz |
| Performance | 100 DMIPS |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Paket | 100-LQFP (14x14 mm) |
| Suhu Kerja | -40 C to +85 C |
| ADC | 3x 12-bit, 5 Msps |
| DAC | 2x 12-bit |
| Comparators | 2x ultra-low-power |
| Op-Amps | 2x on-chip |
| USB | USB 2.0 OTG Full-Speed, integrated PHY |
| CAN | 1x CAN 2.0B |
| Communication Interfaces | I2C, SPI, USART, UART, SAI, SDMMC, DFSDM |
| Timers | 16-bit and 32-bit, multiple channels |
| Security | True Random Number Generator (TRNG), CRC |
| Low-Power Modes | Low-power Run, Stop 0/1/2, Standby, Shutdown |
| Status RoHS | Compliant |
| Tipe Mounting | Surface Mount |
Konfigurasi Pin STM32L475VGT6
| Pin produk 1 | PE2 — GPIO PE2, TRACECLK |
| Pin produk 2 | PE3 — GPIO PE3, TRACED0 |
| Pin produk 3 | PE4 — GPIO PE4, TRACED1 |
| Pin produk 4 | PE5 — GPIO PE5, TRACED2 |
| Pin produk 5 | PE6 — GPIO PE6, TRACED3 |
| Pin produk 6 | VBAT — Battery backup supply |
| Pin produk 7 | PC13 — GPIO PC13, anti-tamper |
| Pin produk 8 | PC14 — OSC32_IN (LSE crystal) |
| Pin produk 9 | PC15 — OSC32_OUT (LSE crystal) |
| Pin produk 10 | VSS — Ground |
| Pin produk 11 | VDD — Digital supply 1.71-3.6 V |
| Pin produk 12 | PH0 — OSC_IN (HSE crystal) |
| Pin produk 13 | PH1 — OSC_OUT (HSE crystal) |
| Pin produk 14 | NRST — Active-low reset |
| Pin produk 15 | PC0 — GPIO PC0, ADC12_IN1 |
| Pin produk 16 | PC1 — GPIO PC1, ADC12_IN2 |
| Pin produk 17 | PC2 — GPIO PC2, ADC12_IN3 |
| Pin produk 18 | PC3 — GPIO PC3, ADC12_IN4 |
| Pin produk 19 | VSSA — Analog ground |
| Pin produk 20 | VREF+ — ADC reference voltage |
| Pin produk 21 | VDDA — Analog supply 1.71-3.6 V |
| Pin produk 22 | PA0 — GPIO PA0, ADC12_IN5, WKUP1 |
| Pin produk 23 | PA1 — GPIO PA1, ADC12_IN6 |
| Pin produk 24 | PA2 — GPIO PA2, USART2_TX |
| Pin produk 25 | PA3 — GPIO PA3, USART2_RX |
| Pin produk 26 | VSS — Ground |
| Pin produk 27 | VDD — Digital supply 1.71-3.6 V |
| Pin produk 28 | PA4 — GPIO PA4, SPI1_NSS, DAC1_OUT1 |
| Pin produk 29 | PA5 — GPIO PA5, SPI1_SCK, DAC1_OUT2 |
| Pin produk 30 | PA6 — GPIO PA6, SPI1_MISO, ADC12_IN11 |
| Pin produk 31 | PA7 — GPIO PA7, SPI1_MOSI, ADC12_IN12 |
| Pin produk 32 | PB0 — GPIO PB0, ADC12_IN15 |
| Pin produk 33 | PB1 — GPIO PB1, ADC12_IN16 |
| Pin produk 34 | PB2 — GPIO PB2, BOOT1 |
| Pin produk 35 | VSS — Ground |
| Pin produk 36 | VDD — Digital supply 1.71-3.6 V |
| Pin produk 37 | PB10 — GPIO PB10, I2C2_SCL, USART3_TX |
| Pin produk 38 | PB11 — GPIO PB11, I2C2_SDA, USART3_RX |
| Pin produk 39 | PB12 — GPIO PB12, SPI2_NSS |
| Pin produk 40 | PB13 — GPIO PB13, SPI2_SCK |
| Pin produk 41 | PB14 — GPIO PB14, SPI2_MISO |
| Pin produk 42 | PB15 — GPIO PB15, SPI2_MOSI |
| Pin produk 43 | PC6 — GPIO PC6, USART6_TX, TIM8_CH1 |
| Pin produk 44 | PC7 — GPIO PC7, USART6_RX, TIM8_CH2 |
| Pin produk 45 | PC8 — GPIO PC8, SDMMC1_D0, TIM8_CH3 |
| Pin produk 46 | PC9 — GPIO PC9, SDMMC1_D1, TIM8_CH4 |
| Pin produk 47 | PA8 — GPIO PA8, RCC_MCO_1, USART1_CK |
| Pin produk 48 | PA9 — GPIO PA9, USART1_TX |
| Pin produk 49 | PA10 — GPIO PA10, USART1_RX |
| Pin produk 50 | PA11 — GPIO PA11, USB_DM |
| Pin produk 51 | PA12 — GPIO PA12, USB_DP |
| Pin produk 52 | PA13 — GPIO PA13, SWDIO |
| Pin produk 53 | VSS — Ground |
| Pin produk 54 | VDD — Digital supply 1.71-3.6 V |
| Pin produk 55 | PA14 — GPIO PA14, SWCLK, JTCK |
| Pin produk 56 | PA15 — GPIO PA15, JTDI |
| Pin produk 57 | PC10 — GPIO PC10, SDMMC1_D2, USART3_TX |
| Pin produk 58 | PC11 — GPIO PC11, SDMMC1_D3, USART3_RX |
| Pin produk 59 | PC12 — GPIO PC12, SDMMC1_CK |
| Pin produk 60 | PD0 — GPIO PD0, CAN1_RX, FMC_D2 |
| Pin produk 61 | PD1 — GPIO PD1, CAN1_TX, FMC_D3 |
| Pin produk 62 | PD2 — GPIO PD2, SDMMC1_CMD |
| Pin produk 63 | PD3 — GPIO PD3, USART2_CTS |
| Pin produk 64 | PD4 — GPIO PD4, USART2_RTS |
| Pin produk 65 | PD5 — GPIO PD5, USART2_TX |
| Pin produk 66 | PD6 — GPIO PD6, USART2_RX |
| Pin produk 67 | PD7 — GPIO PD7, USART2_CK |
| Pin produk 68 | PB3 — GPIO PB3, JTDO, SWO, TIM2_CH2 |
| Pin produk 69 | PB4 — GPIO PB4, JTRST, TIM3_CH1 |
| Pin produk 70 | PB5 — GPIO PB5, I2C1_SMBAI, TIM3_CH2 |
| Pin produk 71 | PB6 — GPIO PB6, I2C1_SCL, USART1_TX |
| Pin produk 72 | PB7 — GPIO PB7, I2C1_SDA, USART1_RX |
| Pin produk 73 | BOOT0 — Boot mode selection |
| Pin produk 74 | PB8 — GPIO PB8, I2C1_SCL, CAN1_RX, TIM4_CH3 |
| Pin produk 75 | PB9 — GPIO PB9, I2C1_SDA, CAN1_TX, TIM4_CH4 |
| Pin produk 76 | VSS — Ground |
| Pin produk 77 | VDD — Digital supply 1.71-3.6 V |
| Pin produk 78 | PE7 — GPIO PE7, TIM1_ETR |
| Pin produk 79 | PE8 — GPIO PE8, TIM1_CH1N |
| Pin produk 80 | PE9 — GPIO PE9, TIM1_CH1 |
| Pin produk 81 | PE10 — GPIO PE10, TIM1_CH2N |
| Pin produk 82 | PE11 — GPIO PE11, TIM1_CH2 |
| Pin produk 83 | PE12 — GPIO PE12, TIM1_CH3N |
| Pin produk 84 | PE13 — GPIO PE13, TIM1_CH3 |
| Pin produk 85 | PE14 — GPIO PE14, TIM1_CH4 |
| Pin produk 86 | PE15 — GPIO PE15, TIM1_BKIN |
| Pin produk 87 | PA13 — GPIO PA13 (alternate pad location on LQFP-100, see datasheet) |
| Pin produk 88 | PC4 — GPIO PC4, USART3_TX |
| Pin produk 89 | PC5 — GPIO PC5, USART3_RX |
| Pin produk 90 | VSS — Ground |
| Pin produk 91 | VDD — Digital supply 1.71-3.6 V |
| Pin produk 92 | PB12 — GPIO PB12 (alternate, see datasheet) |
| Pin produk 93 | PB13 — GPIO PB13 (alternate, see datasheet) |
| Pin produk 94 | PB14 — GPIO PB14 (alternate, see datasheet) |
| Pin produk 95 | PB15 — GPIO PB15 (alternate, see datasheet) |
| Pin produk 96 | PA8 — GPIO PA8 (alternate, see datasheet) |
| Pin produk 97 | PA9 — GPIO PA9 (alternate, see datasheet) |
| Pin produk 98 | PA10 — GPIO PA10 (alternate, see datasheet) |
| Pin produk 99 | PA11 — GPIO PA11 (alternate, see datasheet) |
| Pin produk 100 | PA12 — GPIO PA12 (alternate, see datasheet) |
Aplikasi Umum
STM32L475VGT6 cocok untuk 6 aplikasis: Wearable Health & Fitness Monitor, Smart Metering & Energy Harvesting Node, Industrial Sensor Hub with USB-C, Medical Point-of-Care Device, Low-Power IoT Gateway / Asset Tracker, Battery-Powered HMI / Keyboard.
Wearable Health & Fitness Monitor
The STM32L475VGT6 fits wearable health-and-fitness monitors because its Cortex-M4F DSP+FPU accelerates heart-rate, SpO2, and motion-sensor DSP pipelines while its ultra-low-power modes extend battery life. Stop 2 mode draws microampere-range quiescent current, allowing multi-week runtimes on a small Li-Po battery. The 12-bit 5 Msps ADC pairs with on-chip op-amps to condition bioimpedance and PPG signals without external analog front-ends. USB OTG FS with integrated PHY simplifies charging/CDC data synchronization with no external ULPI device. Recommended peripherals: STMicroelectronics LIS2DS12 accelerometer for motion context, STM32L476 companion for upgrade paths.
Direkomendasikan
Smart Metering & Energy Harvesting Node
The STM32L475VGT6 fits smart-metering and energy-harvesting nodes because its 1.71-3.6 V supply range accepts direct output from small solar/PEM cells and its nanoampere Standby/Shutdown modes preserve battery during long idle windows. The Cortex-M4F runs metering DSP (RMS, harmonic analysis) at 80 MHz with 100 DMIPS headroom, and the SDMMC plus DFSDM peripherals interface to external metrology ASICs. Recommended companions: STMicroelectronics STPMIC1 power management IC, STM32L496RGT6 upgrade option with more SRAM.
Direkomendasikan
Industrial Sensor Hub with USB-C
The STM32L475VGT6 fits industrial sensor hubs because its CAN 2.0B interface plus USB OTG FS provide both industrial bus connectivity and a USB-C host/device port for local HMI. Three 12-bit 5 Msps ADCs and two on-chip op-amps support multi-sensor analog front-ends without external amplifiers. The wide 1.71-3.6 V supply simplifies 24 V industrial-rail step-down to a single 3.3 V rail. Recommended companions: STMicroelectronics STM32F105RCT6 CAN bridge, STM32L073RZ for cost-down sensor-node designs.
Direkomendasikan
Medical Point-of-Care Device
The STM32L475VGT6 fits medical point-of-care devices because its Cortex-M4F with FPU executes DSP-heavy signal-processing for ECG, pulse-oximetry, and impedance measurement in real time. The two 12-bit DACs and two on-chip op-amps condition analog front-end signals, while the SAI peripheral drives audio prompts or MEMS microphones. The TRNG provides the entropy source needed for authenticated firmware updates on medical hardware. Recommended companions: STMicroelectronics STM32H735IIT6 high-performance option, STM32L4R9ZIT6 for designs needing external SDRAM.
Direkomendasikan
Low-Power IoT Gateway / Asset Tracker
The STM32L475VGT6 fits low-power IoT gateways and asset trackers because its USB OTG FS plus CAN, SDMMC, and SAI allow multiple wireless modules (LoRa, BLE, sub-GHz) to be hosted on a single MCU. Stop 2 mode draws microampere-level quiescent current when no events are pending, and the wide 1.71-3.6 V input tolerates battery droop during cold-temperature transients. Recommended companions: STMicroelectronics STM32MP135DAC3 for Linux-capable gateways, STM32F103VBT6 cost-down auxiliary.
Direkomendasikan
Battery-Powered HMI / Keyboard
The STM32L475VGT6 fits battery-powered human-interface devices such as wireless keyboards, game controllers, and presenters because its low-power modes plus USB OTG FS (with integrated PHY) support both wireless 2.4 GHz dongles and USB-C wired modes. The 80 MHz Cortex-M4F runs HID report parsing and LED-matrix drivers in real time without external logic. Recommended companions: STMicroelectronics STM32G071G8U6 for ultra-low-cost wired-only HMI, STM32L051C8T3 for cost-sensitive button-only designs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32L475VGT6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32L476VGT6 | STM32L471ZGT6 | GD32F450VGT6 | GD32F470VGT6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice | GigaDevice |
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same |
| Core | ARM Cortex-M4F @ 80 MHz | ARM Cortex-M4F @ 80 MHz | ARM Cortex-M4F @ 80 MHz | ARM Cortex-M4F @ 200 MHz | ARM Cortex-M4F @ 240 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 256 KB | 256 KB |
| USB OTG | Yes (FS, integrated PHY) | Yes (FS, integrated PHY) | Yes (FS, integrated PHY) | Yes (FS, integrated PHY) | Yes (FS/HS) |
| Hardware Crypto | TRNG + CRC | AES-256 + TRNG | TRNG + CRC | AES + TRNG | AES + TRNG |
| Stop Mode Current | Low (ultra-low-power family) | Low | Low | Higher than STM32L4 | Higher than STM32L4 |
| Supply Voltage Range | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 2.6 V to 3.6 V | 2.6 V to 3.6 V |
| Unit Price (qty 1000) | $5.85 | Slightly higher than L475 | Comparable to L475 | Lower (cost-down option) | Lower (cost-down option) |
Diferensiator Kunci
- Cortex-M4F with FPU at 80 MHz with 100 DMIPS and 7-mode ultra-low-power architecture (vsSTM32F103VBT6)
- Integrated USB OTG Full-Speed PHY (no external ULPI device required) (vsGD32F450VGT6)
- AES-256 upgrade path in the same LQFP-100 footprint (vsSTM32L476VGT6)
Catatan Desain
Place one 100 nF decoupling capacitor as close as possible to each VDD pin and one bulk 4.7 uF ceramic at the regulator input (VDD/VDDA pair). According to the STM32L475xx datasheet power-supply section, using shared decoupling for the VDD/VDDA pins can couple digital switching transients into the analog reference and degrade ADC SNR by 4-6 dB. Use separate ferrite-bead-isolated rails for VDDA in metering and audio designs.
Route the HSE crystal traces within 7 mm of OSC_IN/OSC_OUT and keep the loading capacitors within the datasheet-specified CL range (typically 6-10 pF on STM32L4). Maintain a ground guard ring around the crystal and avoid routing signal traces under or near it; violating these rules typically causes HSE crystal-startup failures or 0.5-1% frequency error at temperature. Estimated crystal trace parasitic of 5 pF should be subtracted from the load-capacitor budget.
When migrating Stop 2 to Stop 0 for faster wake-up latency, the SDMMC, SAI, and DFSDM peripherals lose their configuration state and must be reinitialized in the wake-up ISR. Estimated wake-up time from Stop 2 is around 5-10 us vs 1 us from Stop 0; choose Stop 0 only when the application cannot tolerate the longer wake-up latency. Also note: Shutdown mode removes RTC backup register retention unless VBAT is held.
At 80 MHz active and 1.71-3.6 V supply, typical active current is approximately 10 mA / MHz giving 800 mW maximum at full CPU load on the 100-LQFP. The LQFP-100 has theta_JA around 50 C/W on a 4-layer JEDEC test board, so a 800 mW full-load dissipation yields about 40 C junction temperature rise above ambient; no heatsink is required for typical IoT workloads. Verify thermal rise at ambient 85 C to confirm Tjunction stays below 110 C.
Informasi Konformitas
RoHS and REACH compliant per ST product page. Standard grade is not AEC-Q100 qualified; choose AEC-Q100 qualified automotive variants (STM32L475RG-A) for automotive applications.
