Produk (44.000+)

WM8738CGED/R - 24-Bit Stereo ADC, 96kHz, 14-SOIC | Cirrus Logic
WM8738CGED/R

WM8738CGED/R - 24-Bit Stereo ADC, 96kHz, 14-SOIC | Cirrus Logic

Cirrus Logic Inc. WM8738CGED/R is a low-power 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 96 kHz, supplied in a 14-pin SOIC package. It is designed for audio systems that require digital conversion of left and right analog channels while minimizing component count and board space. The device also includes integrated audio processing and digital audio interface functions, making it suitable for consumer audio, communications, and embedded audio equipment. An ADC is a data-conversion IC that converts continuous analog voltage signals into digital samples. Within the broader semiconductor hierarchy, the WM8738CGED/R belongs to the analog-to-digital converter and audio codec product class, with an I2S digital output that connects to a digital signal processor, audio processor, or other digital audio controller. Its stereo architecture permits simultaneous or coordinated conversion of two audio channels rather than requiring a separate converter for each channel. The principal documented specifications are a 24-bit conversion resolution, a 96 kHz maximum sampling rate, stereo operation, I2S connectivity, low-power operation, and a 14-SOIC package. These characteristics make the converter suitable for digital recording, playback, voice processing, audio capture, and communication equipment. The I2S interface reduces the number of external digital signal lines needed to transfer converted audio data into a host processor. The WM8738CGED/R can be used as the analog front end of a compact stereo audio subsystem. Its multiple digital inputs and outputs support digital-audio signal routing, while integrated mixer, filter, gain, and analog input functions can reduce the need for separate support circuitry. Designers should confirm the required input impedance, clock configuration, codec routing, and system-level channel mapping in the manufacturer datasheet before finalizing the PCB. Typical applications include consumer audio equipment, portable and connected audio products, voice-recording systems, communication terminals, and embedded multimedia platforms. The 14-pin SOIC package is mechanically straightforward for conventional surface-mount assembly, although the analog and digital sections still require careful grounding and decoupling to limit noise coupling. When designing around this converter, prioritize a clean analog supply, short return paths, and separate routing of sensitive audio inputs away from switching nodes and digital clock lines. Confirm the supported input configuration, master or slave clock mode, data format, and required external components against the manufacturer datasheet and reference circuit before production release. This page combines the exact part identification, package information, converter specifications, practical integration guidance, sourcing workflow, and compatibility analysis. It also distinguishes confirmed technical facts from parameters that must be checked directly in the manufacturer datasheet, helping engineers plan a sound evaluation rather than relying on an abbreviated distributor listing.

Permintaan RFG Kontak
WM8740SEDS/V - 24-Bit 192 kHz Stereo DAC | Cirrus Logic
WM8740SEDS/V

WM8740SEDS/V - 24-Bit 192 kHz Stereo DAC | Cirrus Logic

Cirrus Logic WM8740SEDS/V is a 24-bit, two-channel high-performance stereo digital-to-analog converter supporting sampling rates up to 192 kHz. It operates from 3.3 V to 5 V, uses an SPI data interface, and is packaged in a 28-pin SSOP. The device is intended for premium digital audio equipment requiring accurate conversion of multichannel PCM data into balanced or unbalanced analog stereo signals. An audio DAC is a data-converter IC that transforms digital audio samples into analog voltages suitable for headphone, line-level, or power-amplifier inputs. Within the broader semiconductor hierarchy, it belongs to the ADC/DAC class of data converters and ultimately to the wider signal-chain and audio-processing ecosystem. The WM8740SEDS/V combines high-resolution conversion, stereo output, serial digital control, and separate analog and digital supply domains in one integrated device. The principal specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, two audio channels, an SPI interface, and a 3.3 V to 5 V supply range. Its operating-temperature range extends from -40°C to +85°C, allowing deployment in consumer, industrial, and professional audio products. The 28-SSOP package supports conventional surface-mount assembly and is available in the WM8740SEDS/V ordering configuration. The converter architecture is optimized for high-performance stereo playback rather than general-purpose signal conversion. Digital audio data enters through the serial interface and is converted into left- and right-channel analog outputs. Supporting the full 192 kHz sampling rate makes the device relevant to studio-quality playback, network audio, digital preamplifiers, and compact hi-fi systems where a conventional lower-rate converter would restrict source compatibility. Typical applications include high-end CD and network-audio players, professional digital mixers, headphone amplifier boards, powered speakers, and digital audio preamplifiers. In each case, the dual-channel architecture provides simultaneous left and right conversion, while the 192 kHz capability supports high-resolution source material. The SPI control interface also allows a host processor or audio interface controller to configure operating modes and retrieve device status. Circuit implementation requires careful treatment of the analog and digital supply rails. Place required decoupling capacitors close to their associated pins, maintain a low-impedance ground return for the analog outputs, and route digital control signals away from sensitive analog output nodes. The output network, amplifier coupling capacitors, and grounding topology should follow the reference circuit and layout guidance in the manufacturer datasheet. This page organizes the WM8740SEDS/V specifications, sourcing information, qualified drop-in candidate, comparison fields, and application guidance into a design-focused reference. It also highlights which compatibility details must be checked against the manufacturer datasheet before a board revision or production substitution is approved.

Permintaan RFG Kontak
WM8741GEDS/V - 24-Bit 192kHz Stereo DAC | Cirrus Logic
WM8741GEDS/V

WM8741GEDS/V - 24-Bit 192kHz Stereo DAC | Cirrus Logic

The Cirrus Logic WM8741GEDS/V is a high-performance stereo digital-to-analog converter with 24-bit resolution, operation up to 192kHz, and a 28-SSOP package. It accepts PCM word lengths from 16 to 32 bits and supports DSD bit-stream data in direct-DSD and PCM-converted formats. According to the manufacturer datasheet, the device is designed for professional recording systems, A/V receivers, and high-specification CD, DVD, and home-theater equipment. An audio DAC is a data converter within the ADC/DAC and signal-conversion hierarchy. It converts digital audio samples into left- and right-channel analog voltages suitable for headphone or line-level amplification. The WM8741 supports both serial control and hardware control, allowing its operating configuration to be managed by a digital audio processor or selected through external hardware. Key features include a two-channel stereo architecture, 24-bit conversion, sampling rates up to 192kHz, advanced digital filtering, and support for DSD data streams. The 28-SSOP package provides a practical surface-mount format for professional and high-end consumer audio equipment. The manufacturer datasheet also states that the WM8741 is pin compatible with the WM8740, which simplifies evaluation of feature and performance differences between those devices. The WM8741 accepts PCM data across a broad word-length range and can process DSD bit-streams in either direct-DSD or PCM-converted modes. This flexibility allows the same stereo DAC to serve conventional PCM playback systems and designs requiring DSD support. Its serial interface supports 2-wire and 3-wire control schemes, while the hardware-control interface provides access to a selected group of device features without relying entirely on software commands. Typical applications include professional recording equipment, A/V receivers, high-end CD and DVD players, and home-theater systems. It is also suitable for digital audio preamplifiers, network audio players, and other stereo playback products where 24-bit resolution and operation up to 192kHz are useful. The dual-channel implementation is intended for conventional left/right audio rather than multichannel surround decoding. A key design consideration is the dual supply arrangement identified in the available product data: analog and digital circuitry use separate supply sources, and the supported analog supply range is 3.15V to 3.6V or 5V. Layout should therefore preserve clean analog and digital return paths, minimize digital interference near the converter outputs, and follow the manufacturer's recommended application circuit and decoupling guidance. This product record combines verified distributor availability, the manufacturer datasheet, application guidance, pin-compatibility information, and practical selection notes. It also identifies the verified WM8740 and WM8742 family alternatives while clearly separating documented facts from parameters that still require device-level datasheet confirmation.

Permintaan RFG Kontak
WM8742GEDS/V - 24-Bit 192kHz Stereo DAC | Cirrus Logic
WM8742GEDS/V

WM8742GEDS/V - 24-Bit 192kHz Stereo DAC | Cirrus Logic

The Cirrus Logic WM8742GEDS/V is a 24-bit, 192kHz stereo digital-to-analog converter with advanced digital filtering, packaged in a 28-SSOP. It supports PCM word lengths from 16 to 32 bits and accepts DSD bit-stream data in direct DSD or PCM-converted modes, making it a high-performance audio DAC for professional recording equipment, A/V receivers, and home-theater systems. An audio DAC is a signal-conversion semiconductor that transforms digital PCM or DSD audio samples into analog left- and right-channel voltages. Within the broader integrated-circuit hierarchy, the WM8742 belongs to the ADC/DAC class, operates as an audio data converter, and ultimately supports digital audio playback and signal-chain reconstruction. Its dual-channel architecture provides one analog output channel for each stereo signal while accepting a common digital audio stream. The WM8742’s principal features include 24-bit resolution, operation up to 192kHz, support for 16-bit through 32-bit PCM input, DSD compatibility, advanced digital filtering, and selectable serial-control and hardware-control schemes. The 2/3-wire serial interface provides access to device features, while the hardware interface permits control of a defined subset of functions. These capabilities provide flexibility when pairing the converter with a digital audio processor, receiver, or source device. The WM8742GEDS/V is offered in a 28-SSOP measuring approximately 0.209 inches, or 5.30mm, in width. The manufacturer documentation states that this package is pin compatible with the WM8740 and WM8741, which can simplify board-level family transitions when register behavior, feature requirements, and performance targets are appropriately matched. The serial interface also makes the converter suitable for systems where a compact, multiwire digital connection is preferable to a parallel data bus. Typical applications include professional recording systems, A/V receivers, CD and DVD players, and high-specification home-theater equipment. These systems benefit from the combination of high-resolution PCM support, 192kHz operation, DSD handling, and advanced filtering. In each application, the DAC converts the source device’s digital stream into the analog line-level signals required by subsequent amplifiers, mixers, or output stages. Designers should verify the digital audio interface format, supported master-clock arrangement, analog output implementation, and required bypass components against the manufacturer datasheet before layout. The 28-SSOP footprint demands careful decoupling and short analog routing, while software configuration must match the selected PCM or DSD operating mode to avoid format or clocking errors. This product page organizes the WM8742GEDS/V’s core specifications, family drop-in options, application guidance, package information, and design considerations into a practical engineering reference. It also distinguishes pin-compatible alternatives by documented feature differences, helping designers make informed replacement decisions without confusing electrical compatibility with complete functional equivalence.

Permintaan RFG Kontak
WM8750CLSEFL - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8750CLSEFL

WM8750CLSEFL - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8750CLSEFL is a 24-bit stereo audio codec with two ADC channels, two DAC channels, and a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for portable audio systems and can operate as either an audio master or slave, supporting master-clock arrangements for USB devices and standard audio sample-rate systems. An audio codec is an integrated circuit that converts between digital audio data and analog signals. The WM8750 belongs to the codec hierarchy within interface ICs, combining stereo conversion, headphone and speaker output functions, digital audio interfaces, clocking, and analog signal conditioning. This integration reduces the number of discrete components required in portable playback and recording equipment while providing a common control interface for the conversion channels. The codec uses 24-bit conversion for both its ADC and DAC paths and includes two ADC and two DAC channels for stereo operation. Its digital audio processing can work with master clocks of 12 MHz or 24 MHz for USB devices. Standard master-clock frequencies of 12.288 MHz and 24.576 MHz support common audio rates, including 96 kHz, 48 kHz, and 44.1 kHz, without requiring an external PLL. The manufacturer datasheet describes flexible master and slave operation, allowing the WM8750 to integrate with a system master clock or provide clocking to another audio device. The 5 mm by 5 mm QFN package supports compact portable-audio layouts, while its exposed-pad construction requires a properly designed PCB thermal and electrical land pattern. Typical uses include portable media players, USB-connected audio accessories, headphone amplifiers, digital speaker systems, and compact recording products. The combination of stereo conversion, flexible clocking, headphone and speaker outputs, and direct support for widely used sample rates makes the device suitable for designs that require a single audio conversion and output subsystem. PCB implementation should follow the manufacturer’s reference layout for the 32-QFN footprint, including its exposed thermal pad. Input and output filtering networks, analog ground planning, clock routing, and supply decoupling must be evaluated together to preserve audio performance. The codec should not be treated as a generic digital IC because its usable performance also depends on component tolerances, grounding, and the analog output network. This product overview combines the verified device identity and package information with clock-rate, channel-count, conversion-resolution, application, and replacement guidance. It also identifies the boundaries of drop-in substitution: a replacement is suitable only when its footprint, electrical behavior, control interface, and clock requirements are confirmed rather than inferred from similar codec functionality.

Permintaan RFG Kontak
WM8750LSEFL - Stereo Audio Codec with Speaker | Wolfson
WM8750LSEFL

WM8750LSEFL - Stereo Audio Codec with Speaker | Wolfson

The Wolfson Microelectronics WM8750LSEFL is a stereo audio codec with headphone and speaker outputs, designed for portable audio applications. It combines a 98 dB A-weighted DAC signal-to-noise ratio, a 95 dB A-weighted ADC signal-to-noise ratio, a mono 400 mW BTL speaker driver, and a headphone output capable of delivering more than 40 mW into 16 ohms from a 3.3 V supply. An audio codec is an integrated circuit that converts between digital audio data and analog microphone, headphone, and speaker signals. In the signal-chain hierarchy, the WM8750LSEFL is an audio codec, a mixed-signal interface IC, and a power-management-assisted audio output device. Its integrated converter, microphone interface, headphone amplifier, and speaker driver reduce the number of external components required in portable playback, recording, and communication equipment. The device supports a complete stereo or mono microphone interface with programmable automatic level control and a noise gate. The 98 dB A-weighted DAC SNR and -95 dB total harmonic distortion at 48 kHz and 3.3 V support low-noise digital-to-analog playback. Its 95 dB A-weighted ADC SNR and -90 dB total harmonic distortion at the same operating condition provide symmetrical recording performance when low distortion is important. Output integration provides practical advantages for portable systems. The mono bridge-tied-load speaker driver can deliver 400 mW without requiring a separate power amplifier, while the integrated headphone driver can supply more than 40 mW into a 16-ohm load at 3.3 V. These functions are controlled through the codec interface, allowing software-managed audio routing and gain configuration. Typical uses include portable media players, personal audio devices, smart-home audio endpoints, headset electronics, compact recording products, and battery-powered communication equipment. Its integrated speaker and headphone paths are especially useful where PCB area, component count, and power-management complexity must be controlled without sacrificing essential playback functions. When laying out a circuit, use the manufacturer pin-description table and application schematic to assign analog, digital, and power connections. Keep microphone inputs and headphone outputs away from high-speed digital traces, provide the recommended decoupling capacitors at their supply pins, and verify speaker impedance and thermal conditions against the datasheet limits. This product record combines the WM8750LSEFL feature information with practical guidance on audio performance, layout, thermal considerations, component pairing, and replacement selection. It is structured to help engineers identify the correct codec, compare its integrated functions, and plan a robust portable-audio implementation before layout release.

Permintaan RFG Kontak
WM8759GED/RV - 24-Bit Stereo DAC with Headphone Buffer
WM8759GED/RV

WM8759GED/RV - 24-Bit Stereo DAC with Headphone Buffer

Wolfson Microelectronics plc WM8759GED/RV is a 24-bit stereo digital-to-analogue converter with a 192 kHz sampling rate and an integrated headphone buffer, housed in a 14-pin SOIC package. The converter combines a serial audio interface, digital interpolation filters, multi-bit sigma-delta modulators, stereo DAC channels, line outputs, and headphone outputs. A digital-to-analogue converter, or DAC, is an audio interface integrated circuit that converts digital PCM samples into analog voltage signals. In the signal hierarchy, the WM8759GED/RV belongs to the DAC family within audio codec and data-converter ICs. Its integrated headphone buffer reduces the external circuitry required to drive headphones while preserving a compact 14-pin surface-mount implementation. The principal features include support for data input word lengths up to 24 bits and sampling rates up to 192 kHz. Digital interpolation filtering prepares incoming audio data for the multi-bit sigma-delta modulator stages, while the two stereo DAC channels generate the analog line-level outputs. A dedicated headphone output section provides a practical path from digital audio source to amplified headphone drive. Internally, the WM8759GED/RV follows a mixed-signal signal chain: a serial interface accepts digital audio data, digital interpolation filters shape that stream, multi-bit sigma-delta modulators perform noise-shaping conversion, and stereo DAC outputs reconstruct the analog waveform. This integration makes the device suitable for compact consumer audio products that require both line-level output and headphone connectivity without separate DAC and headphone-driver packages. Typical applications include portable DVD players, MP3 players, consumer equipment with line and headphone outputs, portable media systems, digital audio accessories, and compact audio playback products. The 24-bit interface and 192 kHz capability align with high-resolution digital audio sources, while the 14-pin SOIC package supports straightforward surface-mount assembly. Designers should confirm interface timing, supported master and slave clock arrangements, output configuration, required external capacitors, analog routing, and headroom against the manufacturer datasheet before finalizing the PCB. Because this part combines digital control, mixed-signal conversion, and headphone drive, grounding and decoupling recommendations from the manufacturer application guidance should be followed closely. This product record organizes the WM8759GED/RV technical identity, package information, commercial workflow, and application guidance into an engineering-focused reference for evaluating this stereo DAC and headphone-buffer solution.

Permintaan RFG Kontak
WM8759GED/V - 24-Bit 192kHz Stereo DAC | Wolfson
WM8759GED/V

WM8759GED/V - 24-Bit 192kHz Stereo DAC | Wolfson

Wolfson Microelectronics WM8759GED/V is a 24-bit, 192kHz stereo digital-to-analog converter with an integrated headphone buffer. It provides line-level and headphone output connections for portable DVD players, MP3 players, and other consumer audio equipment. The converter combines digital audio playback, stereo DAC conversion, and headphone amplification in one integrated circuit, reducing the need for separate output-driver stages in compact products. A stereo DAC is an audio signal-chain component that converts digital PCM audio samples into analog left and right channel voltages. It belongs to the broader digital-to-analog converter and audio interface hierarchy. An integrated headphone buffer further conditions those analog signals for headphone loads, allowing the WM8759GED/V to serve both fixed-line and variable-headphone outputs within portable consumer-audio designs. The verified manufacturer-datasheet description identifies the principal audio capabilities as 24-bit resolution, operation up to 192kHz, stereo conversion, an integrated headphone driver, line output, and headphone output. These specifications make the device relevant to digital media players and other systems that reproduce CD-quality or higher-resolution digital audio and require both line-level and headphone connections. The WM8759GED/V's architecture combines a stereo DAC section with a headphone-output stage rather than treating headphone drive as a completely separate function. Integrating those blocks can simplify system partitioning and reduce board area. The precise digital interface format, analog performance figures, clocking requirements, output topology, and supported sample-rate details require confirmation from the complete manufacturer datasheet and must not be inferred from the available distributor summary. Typical uses include portable DVD players, MP3 players, and consumer equipment featuring line and headphone outputs. Its 24-bit, 192kHz capability supports high-resolution digital-audio paths, while the integrated headphone buffer is especially useful where a product needs both an external line connection and a direct headphone connection without adding another discrete output buffer. Designers should verify the exact 32-lead QFN footprint, exposed-pad requirements, decoupling, analog routing, and digital interface timing before layout release. Headphone and line outputs should also be checked for load compatibility, startup behavior, and channel alignment. Because the verified web results provide only a functional summary, unavailable electrical, environmental, and package details are marked separately rather than estimated. This page consolidates the verified WM8759GED/V function, distributor availability information, qualified same-family references, and practical selection guidance. It distinguishes documented capabilities from parameters that still require confirmation, helping engineers locate the datasheet, assess replacement risk, and plan a portable-audio design without presenting unverified specifications as facts.

Permintaan RFG Kontak
WM8761CBGED - 24-Bit 192kHz Stereo DAC | Cirrus Logic
WM8761CBGED

WM8761CBGED - 24-Bit 192kHz Stereo DAC | Cirrus Logic

The Cirrus Logic WM8761CBGED is a 24-bit stereo digital-to-analog converter for digital audio systems, supporting sampling rates up to 192 kHz and packaged in a 14-pin SOIC. Its serial interface accepts 16-bit to 24-bit data through I2S, right-justified, or DSP formats, while integrated digital interpolation filters, multi-bit sigma-delta modulators, and stereo DAC channels convert decoded digital audio into left- and right-channel analog signals. An audio DAC is a digital-to-analog converter, a specialized interface IC within the ADC/DAC product family and the broader signal-conversion semiconductor hierarchy. Its purpose is to reconstruct continuous analog voltage waveforms from sampled digital audio data. The WM8761 is positioned for consumer and multimedia audio equipment, including DVD systems, home-theater equipment, digital television, and systems receiving decoded AC-3, DTS, or MPEG audio streams. The WM8761 supports data word lengths from 16 to 24 bits and sampling rates up to 192 kHz. Selectable serial-audio formats give the converter flexibility when connecting to different digital-audio decoders, digital signal processors, or microcontrollers. Digital de-emphasis, mute control, and digital interpolation filtering support practical playback-chain integration. A 14-pin SOIC package also keeps the footprint compact relative to older, larger converter implementations. Internally, the device combines a serial interface port with digital interpolation filters, multi-bit sigma-delta modulators, and stereo DAC output stages. The interpolation filters prepare the incoming high-rate digital stream for the DAC stages, while the sigma-delta architecture represents the converted signal using high-resolution noise shaping. The Cirrus Logic manufacturer datasheet identifies the WM8761 as a low-cost stereo converter intended for decoded surround-sound and conventional stereo audio playback. Typical deployments include digital television audio reproduction, DVD-player output, home-theater receiver analog stages, AC-3 and DTS decoder interfaces, and MPEG audio decoder output paths. The I2S interface is particularly useful for digital audio buses, while right-justified and DSP modes accommodate source devices with different data alignment. System designers should match the digital source word length and clocking method to the supported converter configuration. Circuit implementation requires a stable analog and digital supply arrangement, correct master-clock and serial-audio routing, and output-network selection suited to the next analog stage. The 14-pin package should be checked against the manufacturer pin-description table before assigning PCB nets. Designers must also confirm whether the target channel requires mute, de-emphasis, a particular data format, or an external output filter appropriate to the intended audio bandwidth. This product page consolidates the manufacturer specifications, ordering information, application context, design cautions, and sourcing workflow for the WM8761CBGED. It also distinguishes the verified discontinued status of the original device from the separate task of finding a genuinely pin-compatible replacement, avoiding unsupported assumptions about substitute ICs.

Permintaan RFG Kontak
WM8762CGED - 24-Bit 192kHz Stereo DAC | Cirrus Logic
WM8762CGED

WM8762CGED - 24-Bit 192kHz Stereo DAC | Cirrus Logic

Cirrus Logic WM8762CGED is a 24-bit stereo digital-to-analog converter IC operating up to 192 kHz and housed in an 8-pin SOIC package. Verified distributor data identifies it as a serial audio DAC with a 24-bit resolution, 192 kHz capability, and an 8-SOIC format. A DAC is a data-conversion semiconductor that transforms digital audio samples into left- and right-channel analog voltages. In the signal hierarchy, the WM8762CGED belongs to the digital-to-analog converter class, then to the ADC/DAC family and the broader signal-conversion and audio interface categories. Its stereo outputs are suited to audio playback paths in consumer, communications, and embedded audio systems. The verified data identifies three headline characteristics: 24-bit resolution, support for operation up to 192 kHz, and an 8-pin SOIC package. These values position the converter for designs requiring higher-resolution digital audio and a compact surface-mount footprint. The serial interface and stereo output architecture allow a digital audio source to feed two analog channels through one converter IC. The WM8762CGED family is identified in distributor listings as a Wolfson/Cirrus Logic audio DAC. Its practical implementation depends on the host audio interface, clocking scheme, analog output network, supply arrangement, and the format expected by the connected digital source. Exact pin names, voltage ratings, output architecture, and supported digital audio formats require confirmation from the manufacturer datasheet before PCB or firmware design. Typical audio uses include digital audio players, multimedia systems, communications equipment, and embedded sound-control platforms. In a player design, the converter would typically sit between the digital audio processor and an analog output stage feeding headphones or a line-input amplifier. The compact SOIC package can simplify routing where a small surface-mount footprint is important. Designers should verify the datasheet pinout, recommended decoupling, clock requirements, analog output connection, and supported operating conditions. Since the supplied data does not state supply voltage, pin functions, output mode, or digital interface details, those values are intentionally marked as data needed rather than inferred. This page separates verified distributor facts from engineering information that still requires datasheet confirmation. This page consolidates verified distributor references, package identity, audio-resolution information, and selection guidance. It does not treat generic cross-reference results as proof of drop-in replacement; engineering equivalence must be confirmed by package, pinout, electrical limits, and digital-interface compatibility.

Permintaan RFG Kontak
WM8766GEDS/V - 24-Bit 6-Channel 192kHz DAC | Cirrus Logic
WM8766GEDS/V

WM8766GEDS/V - 24-Bit 6-Channel 192kHz DAC | Cirrus Logic

The Cirrus Logic WM8766GEDS/V is a 24-bit, six-channel digital-to-analog converter operating at up to 192 kHz and supporting DSP and I2S audio interfaces. The device is supplied in a 28-pin SSOP package, uses a 2.7 V to 5.5 V supply range, and is specified for -25 °C to 85 °C operation. It is designed for multichannel audio systems requiring multiple synchronized analog outputs. An audio DAC is a data-conversion IC that transforms digital audio samples into corresponding analog voltage signals. In the broader hierarchy, the WM8766GEDS/V is a digital-to-analog converter within the ADC/DAC family of data-converter and signal-conversion integrated circuits. Such devices are commonly positioned between an audio processor and an analog amplification or speaker-output stage, where they translate I2S or DSP data into left, right, and additional multichannel outputs. The principal features of the WM8766GEDS/V include six DAC channels, 24-bit resolution, a maximum sampling rate of 192 kHz, and support for both I2S and DSP serial interfaces. Its 2.7 V to 5.5 V operating supply supports integration with conventional consumer and embedded audio equipment. The 28-pin SSOP package also provides a surface-mount format suitable for automated PCB assembly, although its lead pitch is finer than that of a standard SOIC package. The converter architecture is intended for high-resolution multichannel playback rather than general-purpose signal generation. A 24-bit data path allows the source system to preserve a larger amplitude-resolution range than lower-resolution converters, while operation at 192 kHz supports high-rate digital audio streams. The available I2S interface is useful for standard audio links between a digital signal processor and the DAC, while DSP interface support provides a framed alternative for compatible source components. Typical applications include DVD and home-cinema surround-sound systems, multichannel hi-fi equipment, automotive audio products, and other audiovisual equipment requiring several synchronized DAC outputs. The six-channel architecture is particularly appropriate when left, right, center, surround, and additional playback channels must be generated from one converter package. Designers should confirm the supported clock, audio-interface, supply, and output configuration against the manufacturer datasheet before layout. The 28-pin SSOP footprint requires a land pattern tailored to its 0.65 mm lead pitch, and analog and digital supply routing should follow the decoupling and grounding recommendations in the Cirrus Logic documentation. Pin assignments, output-mode options, and electrical limits must be checked for the selected board revision. This product record combines the verified WM8766GEDS/V channel count, resolution, sampling rate, interface, supply, package, temperature, and lifecycle information with practical integration guidance. It also distinguishes verified drop-in replacements from related Cirrus Logic family members that may differ in temperature grade, order code, or electrical configuration.

Permintaan RFG Kontak
WM8768GEDS/V - 8-Channel 24-Bit 192kHz Audio DAC | Cirrus Logic
WM8768GEDS/V

WM8768GEDS/V - 8-Channel 24-Bit 192kHz Audio DAC | Cirrus Logic

Cirrus Logic WM8768GEDS/V is an 8-channel audio digital-to-analog converter with 24-bit resolution, support for operation up to 192kHz, digital signal processing, volume control, and an I2S interface. The device is supplied in a 28-pin SSOP package and is intended for DVD, surround-sound, home hi-fi, automotive, and other audio-visual equipment. The WM8768 is a multi-channel audio DAC. In the signal-chain hierarchy, it belongs to the digital-to-analog converter category, within ADC/DAC converters and data-converter integrated circuits. Such converters translate digital audio samples into analog voltage signals that drive speakers, headphones, amplifiers, or other analog audio stages. The eight-channel architecture is useful when one system must support several simultaneous audio outputs rather than requiring a separate single-channel converter for each output. The verified distributor descriptions identify the WM8768GEDS/V as an audio DAC with 24-bit resolution, 192kHz maximum sampling capability, DSP processing, I2S connectivity, volume control, and 103dB dynamic range as stated by Mouser. It also identifies the physical format as a 28-pin SSOP. These characteristics make the converter suitable for high-fidelity multichannel playback, receiver and amplifier designs, automotive audio systems, and other applications requiring multiple digital audio channels. The digital interface and integrated DSP distinguish the WM8768 from a simple parallel DAC. I2S is commonly used to connect digital audio sources to converters, while on-chip signal processing and volume control reduce the amount of external processing required for channel management and gain adjustment. The available source material does not provide a complete electrical description of the DSP filters, clocks, output architecture, analog supply limits, or digital I/O levels; these details must therefore be confirmed in the manufacturer datasheet before schematic capture. A typical design would accept I2S audio from a source processor, configure the converter for the desired channel map and sample rate, and route the analog outputs toward line-level amplification. Decoupling and output filtering must follow the manufacturer reference circuit. Because the verified data does not include capacitor values or a full pin assignment, engineers should not infer those values from generic audio guidance. The WM8768GEDS/V is appropriate when the design needs an integrated eight-channel, high-resolution audio DAC rather than a low-channel-count codec. It is also relevant to CD, DVD, home theater, automotive infotainment, and powered-speaker systems, provided the system clocking, supported sample-rate configuration, and analog output topology match the finished board. Current distributor listings show the part available through major electronics distributors, while detailed pricing and lifecycle terms should be checked against live inventory. This page consolidates the verified 24-bit, 192kHz, eight-channel, DSP, I2S, volume-control, 103dB, and SSOP-28 facts while separating confirmed data from missing technical details. It also identifies same-family alternatives and provides practical design cautions for clocking, filtering, grounding, and supply decoupling without inventing unverified component values.

Permintaan RFG Kontak
WM8770ASIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus
WM8770ASIFT/V

WM8770ASIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus

The Cirrus Logic WM8770ASIFT/V is a 24-bit, eight-channel audio codec with analogue volume control and a maximum sampling rate of 192 kHz, supplied in a 64-pin TQFP package. It combines multichannel digital audio conversion with analogue signal conditioning for professional audio, consumer electronics, communications, and test equipment designs. The WM8770 family supports 24-bit serial audio and integrates eight channels of audio processing into a single device. An audio codec is a semiconductor that converts digital audio data into analogue signals and, in a bidirectional design, converts analogue audio into a digital PCM stream. In the signal-processing hierarchy, the WM8770 belongs to the audio codec class, combining an audio digital-to-analogue converter, analogue-to-digital converter, volume control, serial digital interface, and supporting analogue circuitry. Its role is to connect digital audio sources or processors to analogue input and output stages while preserving a common sampling and bit-depth framework. The primary specifications are 24-bit resolution, eight audio channels, and operation up to 192 kHz. Analogue volume control provides adjustable signal level within the codec rather than relying entirely on external attenuators. The 64-pin TQFP package offers enough pins for the multichannel analogue interfaces and digital control connections, while its surface-mount construction is suitable for compact, automated PCB assembly. The architecture is tailored for audio systems requiring multiple simultaneous channels rather than a simple stereo codec. Serial digital audio data, analogue channels, volume control, and device configuration must be considered together when establishing the system clock, channel format, input and output routing, and analogue signal scaling. Incorrect master-clock or serial-interface configuration can prevent correct decoding even when individual analogue signals are present. Typical uses include multichannel recording equipment, broadcast and studio audio systems, active speaker and amplifier modules, USB or network audio gateways, automotive infotainment platforms, and laboratory audio analysers. The eight-channel architecture is particularly useful where simultaneous playback, capture, monitoring, or line-level routing is required within one subsystem. PCB design should provide a continuous ground reference, keep analogue and digital return paths controlled, place decoupling capacitors close to the supply pins, and route high-frequency digital signals away from sensitive analogue inputs. The datasheet pin-description and application circuits should be used when assigning every pin and selecting external component values. This page combines the WM8770 family specifications with package guidance, comparison parameters, sourcing instructions, and practical integration notes. It helps engineers separate confirmed device characteristics from details that must still be checked against the latest manufacturer documentation before schematic release or production qualification.

Permintaan RFG Kontak
WM8770SIFT/RV - 24-Bit 8-Channel Audio Codec | Cirrus Logic
WM8770SIFT/RV

WM8770SIFT/RV - 24-Bit 8-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8770SIFT/RV is a 24-bit, eight-channel audio codec designed for surround-sound processing in home hi-fi, automotive, and audiovisual equipment. It supports operation up to 192 kHz, uses a serial data interface, and is packaged in a 64-pin TQFP measuring 10 mm by 10 mm. The codec combines one ADC with four DAC outputs for multichannel signal conversion and volume control. An audio codec is an integrated-circuit category that converts digital audio data into analog signals, converts analog audio into digital data, and controls signal levels within an audio system. Within the broader hierarchy, the WM8770 belongs to the audio codec class, then to interface ICs, and ultimately to integrated circuits. It reduces the number of separate converters, amplifiers, and volume-control components required around a digital audio processor. The WM8770 provides 24-bit resolution, eight-channel operation, and sampling rates up to 192 kHz. Its one ADC and four DAC arrangement supports designs in which multiple analog outputs require independent digital-to-analog conversion. Serial interface operation helps simplify connection to a digital signal processor or audio host while reducing parallel routing requirements. Its 2.7 V to 3.6 V operating range supports common low-voltage digital audio systems. Technically, the WM8770 integrates conversion and volume-control functions rather than requiring separate digital-to-analog converters for each output. The 10 mm by 10 mm TQFP provides a surface-mount solution with 64 package leads. The WM8770SIFT/RV ordering suffix identifies a specific reel-packaged device configuration, while the underlying WM8770 family is associated with surround-sound and high-performance multichannel audio applications. Typical uses include home theater receiver back ends, surround-sound decoding systems, automotive head-unit audio paths, digital television equipment, and powered speakers with centralized volume control. The eight-channel codec architecture is particularly useful where a system processes multiple surround channels but does not require a separate conversion IC for every analog output. Board design should follow the manufacturer pin-description table when assigning power, ground, analog, digital, and interface connections. Pay particular attention to analog and digital ground partitioning, decoupling placement, and the layout of audio input and output traces. Stable reference, clock, and supply arrangements are especially important when maximizing the codec's 24-bit, 192 kHz operating capability. This page combines the exact package and codec characteristics with practical design guidance, same-footprint replacement analysis, and a parameter-level comparison. It is intended to help engineers identify whether the WM8770SIFT/RV matches an existing audio architecture and what must be checked before approving a board substitution.

Permintaan RFG Kontak
WM8770SIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus Logic
WM8770SIFT/V

WM8770SIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8770SIFT/V is a high-performance, 8-channel audio codec with 24-bit resolution, a maximum sampling rate of 192 kHz, integrated volume control, and a 64-pin TQFP package. It is designed for multichannel surround-sound processing in home hi-fi, automotive, and audiovisual equipment. The codec combines multichannel signal conversion with programmable volume control, reducing the number of external audio-processing components required in a complex sound system. An audio codec is an interface IC that converts digital audio data into analog signals and analog audio into digital data. The WM8770 belongs to the broader codec hierarchy that includes audio codecs, data converters, signal-processing semiconductors, and interface ICs. Its 8-channel architecture supports surround-sound and multichannel audio paths, while the 24-bit conversion format accommodates high-resolution consumer and automotive audio systems. According to the manufacturer datasheet, the WM8770 uses a stereo 24-bit multibit sigma-delta ADC for the analog-to-digital conversion function. The headline capabilities of the WM8770 include eight audio channels, 24-bit conversion, operation up to 192 kHz, digital volume control, and a serial audio interface. These features make it useful where several synchronized audio channels must be converted or controlled through a common codec. The digital volume function can provide centralized level management across multiple channels, which is valuable in surround processors, receivers, automotive head units, and other equipment with several playback or recording paths. The WM8770SIFT/V is packaged in a 64-pin TQFP, a surface-mount package suited to multilayer PCB assemblies. Its 64-pin count provides the interconnections required for multiple analog channels, digital control signals, serial audio data, clocking, and power. The 192 kHz capability supports high-rate digital audio workflows, while the 24-bit resolution gives designers headroom for filtering and signal-chain headroom. The codec's principal system trade-off is its relatively high channel and pin count compared with a stereo codec, making it most appropriate when multichannel integration is more important than minimum footprint or power. Typical uses include home-theater surround processing, automotive infotainment, powered speakers, multichannel amplifiers, home audiovisual equipment, and audio/video receivers. In these systems, the codec can centralize digital-to-analog conversion and volume control while reducing the need for separate channel-conversion and attenuation stages. Firmware and system integration must still account for serial interface format, clocking, supported sample rates, analog routing, and the required bypass or soft-mute behavior. PCB implementation should place analog and digital return paths carefully and preserve the layout practices described in the manufacturer application guidance. Keep sensitive analog traces short, provide clean references around converter inputs and outputs, route high-speed digital signals away from analog nodes, and decouple supply pins close to the device. Verify the serial audio master or slave relationship, sample-rate support, and channel mapping in the final system design. This product page organizes the WM8770SIFT/V specifications, application guidance, comparison parameters, and design considerations into one engineering-focused reference. It also distinguishes verified codec attributes from detailed electrical values that require confirmation against the current manufacturer datasheet before schematic release or PCB sign-off.

Permintaan RFG Kontak
WM8772SEDS/RV - 24-Bit 6-Channel Audio Codec | Cirrus Logic
WM8772SEDS/RV

WM8772SEDS/RV - 24-Bit 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8772SEDS/RV is a 24-bit, six-channel audio codec with a 192 kHz maximum sampling rate, one ADC, three DACs, and an SPI control interface in a 28-pin SSOP package. It combines a 100 dB ADC signal-to-noise ratio with a 103 dB DAC signal-to-noise ratio, making it suitable for multichannel consumer audio, home entertainment, and active-speaker signal-chain designs. An audio codec is an integrated circuit that converts between analog audio signals and digital PCM data. The WM8772 belongs to the broader codec hierarchy of interface ICs, audio converters, signal-processing semiconductors, and data-conversion ICs. Its sigma-delta conversion architecture supports high-resolution audio while providing a digital interface for configuration and sample-data transfer. The SPI control connection allows a host processor to program operating parameters and exchange audio data over a compact serial link. Key features include 24-bit conversion, six-channel operation, support for sampling rates up to 192 kHz, one ADC, three DACs, and separate ADC and DAC signal-to-noise figures of 100 dB and 103 dB. The device uses a 28-SSOP surface-mount package identified as PDSO28, with a body size of 10.20 mm by 5.30 mm and a stated height of 1.75 mm. It is also identified as lead-free, supporting compact, high-density audio equipment designs. The WM8772SEDS/RV combines an analog audio input path, three digital-to-analog conversion channels, and one analog-to-digital conversion channel in a single device. This integration can reduce the number of separate converters required in a six-channel system. The 103 dB DAC signal-to-noise ratio is 3 dB higher than the 100 dB ADC figure, making the playback paths the device's strongest specified noise-performance area. The 192 kHz capability supports high-resolution source material when the surrounding system clock, digital interface, analog circuitry, and output stage support that rate. Typical uses include surround-sound receivers, multimedia speakers, digital active speakers, audio docking systems, and embedded playback platforms. In these applications, the codec accepts or generates multiple audio channels while a host processor controls configuration through SPI. The device is also suitable for prototype platforms that need multiple conversion channels without using three separate DAC packages and an additional ADC. Circuit layout should preserve the integrity of both analog and digital sections. Keep the codec's supply and ground connections close to their package pins, place recommended bypass capacitors at the associated power pins, and route high-speed SPI signals away from sensitive audio inputs. Confirm all supported clock, interface, and bypass-component requirements against the manufacturer datasheet before releasing the PCB layout. This product page combines the WM8772SEDS/RV's principal conversion specifications with application-specific design guidance, replacement analysis, and a practical view of its SSOP-28 implementation. It is intended to help engineers evaluate codec architecture, interface routing, channel requirements, and PCB integration before selecting a production audio subsystem.

Permintaan RFG Kontak
WM8772SEDS/V - 24-Bit 6-Channel Audio Codec | Cirrus Logic
WM8772SEDS/V

WM8772SEDS/V - 24-Bit 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic WM8772SEDS/V is a 24-bit, six-channel audio codec with volume control, supporting audio sampling up to 192 kHz and operating through a 28-pin SSOP package. Its one ADC and three DAC channels support multichannel audio processing where a compact interface between digital audio data and analog signal paths is required. An audio codec combines digital-to-analog and analog-to-digital conversion functions with the control logic needed to exchange audio samples through a digital serial interface. Within the product hierarchy, the WM8772SEDS/V is an audio codec, an interface IC, and a semiconductor designed specifically for consumer audio and audio-visual equipment. Its role is to translate digital audio samples into analog signals and capture analog audio into digital data. The WM8772SEDS/V provides 24-bit resolution for six-channel audio operation, with a maximum sampling rate of 192 kHz. It includes one ADC and three DAC channels, giving designers a mixed-signal conversion resource without requiring separate converters for every direction. Integrated volume control adds another system-level function, allowing signal-level adjustment within the codec rather than through a separate analog amplifier or software-controlled attenuator. The digital control interface is SPI, which supports connection to a host processor or digital audio controller. The manufacturer describes the device as a six-channel stereo codec suitable for DVD, surround-sound, home hi-fi, automotive, and other audio-visual applications. This combination of high sample-rate support, integrated conversion channels, and volume control makes it relevant to multichannel consumer-electronics signal paths. The physical implementation uses a 28-pin SSOP package identified as PDSO28 with dimensions of 10.20 mm by 5.30 mm and a 1.75 mm height. The package is lead-free and conforms to MO-150AH. Its relatively long lead spacing and low profile support conventional surface-mount assembly while providing enough connections for digital control, analog audio channels, clocks, and power rails. Circuit design should treat analog signal routing, digital clock integrity, grounding, and supply decoupling as separate concerns. Keep analog audio traces short and away from high-current switching paths, place input and output capacitors at the appropriate codec pins, and maintain controlled return paths for both analog and digital sections. The manufacturer pin-description table and application circuit should be used when assigning connections and selecting external component values. This page organizes the WM8772SEDS/V specifications, verified sourcing links, package information, application guidance, and verified substitute information into one engineering-focused resource. It also highlights the limits of direct replacement, helping designers distinguish an exact drop-in option from codec variants that may require different firmware, register maps, signal paths, or board-level support.

Permintaan RFG Kontak
WM8775SEDS/V 24-Bit 96kHz Stereo ADC | Cirrus Logic
WM8775SEDS/V

WM8775SEDS/V 24-Bit 96kHz Stereo ADC | Cirrus Logic

The Cirrus Logic WM8775SEDS/V is a high-performance stereo audio analog-to-digital converter with a 24-bit resolution, a maximum sampling rate of 96 kHz, and a four-channel input multiplexer. The device is packaged in a 28-pin SSOP and is designed for digitizing multiple analog audio sources used in home hi-fi, automotive, and audiovisual equipment. An audio ADC is an integrated circuit that converts analog audio voltages into a digital representation for processing, storage, transmission, or playback. The WM8775 belongs to the broader ADC and DAC product category, specifically a multiplexed stereo audio ADC. Its four-channel input mixer allows several analog sources to be selected and digitized through the same conversion engine, reducing the need for separate converters when a system must process multiple audio inputs. The primary verified specifications for the WM8775SEDS/V are its 24-bit conversion resolution, 96 kHz sampling capability, stereo ADC architecture, four-channel input multiplexer, I2S digital interface, and 28-pin SSOP package. According to the manufacturer-linked datasheet information in the verified sources, the device is intended for high-performance audio digitization and surround-sound processing applications. The manufacturer datasheet is the authoritative source for detailed electrical limits, clock requirements, analog input ranges, digital timing, recommended application circuits, and package dimensions. Typical application areas include surround-sound processors, home audio equipment, automotive audio systems, and other audiovisual products that require multiple analog audio inputs to be converted into a digital format. In these systems, the multiplexer can select different source signals while the stereo ADC performs the actual conversion. The I2S interface supports integration with digital audio processors, decoders, receivers, and other equipment using compatible serial audio connections. Designers should verify the WM8775SEDS/V pinout, analog input configuration, clocking requirements, digital interface timing, supply recommendations, and decoupling requirements against the manufacturer datasheet before layout. Because the available verified material is primarily distributor and indexed-datasheet information rather than a complete numerical electrical table, unspecified values are marked as [DATA_NEEDED] rather than inferred. The SSOP footprint also requires attention to thermal performance, lead spacing, soldering profile, and analog signal routing. This page combines verified distributor identification, datasheet indexing, package information, application context, comparison structure, and engineering design guidance. It distinguishes documented facts from parameters that require confirmation in the official WM8775 datasheet, helping engineers identify the correct 24-bit, 96 kHz multiplexed stereo ADC without relying on unsupported assumptions.

Permintaan RFG Kontak
WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8776SEFT/V

WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8776SEFT/V is a 24-bit stereo audio codec with five-channel input multiplexing, supporting operation up to 192 kHz and supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device accepts a 2.7 V to 5.5 V analog supply and a 2.7 V to 3.6 V digital supply, making it suitable for mixed-signal audio systems that require compact conversion and input selection. An audio codec is an integrated circuit that converts analog audio signals into digital PCM data and converts digital playback data back into analog audio. A stereo codec handles two audio channels, while an integrated input multiplexer selects among several physical inputs. The WM8776SEFT/V combines those functions in one device, reducing the number of separate signal-routing and conversion components required in a compact audio subsystem. The principal device ratings include 24-bit resolution, a maximum sample rate of 192 kHz, stereo operation, and a five-channel input multiplexer. Its analog supply range of 2.7 V to 5.5 V accommodates conventional analog signal-chain power levels, while its 2.7 V to 3.6 V digital supply range supports digital interfaces operating within the stated range. These features make the codec applicable to consumer audio equipment, multimedia systems, and other products requiring stereo recording or playback. The WM8776 family is identified in technical documentation as the Stereo CODEC with 5 Channel I/P Multiplexer. Its active operating-temperature range is -25°C to 85°C. The 48-TQFP package provides 48 external connection positions and a 7 mm by 7 mm body footprint, allowing placement in a conventional surface-mount PCB design while maintaining access to power, data, clock, and analog-audio connections. Typical uses include digital recording systems, compact stereo playback equipment, multimedia convergence products, and mixed-signal audio control platforms. The five-channel multiplexer is particularly useful when a design must choose among several analog sources without adding multiple analog switch packages. The 192 kHz capability also supports high-rate audio processing where the surrounding converter, clocking, and signal-chain circuitry supports the same operating rate. Design work should begin with the manufacturer pin-description and application information because the exact analog input selection, digital interface, clock requirements, and external component recommendations depend on the complete board architecture. Verify signal levels and supply sequencing before connecting external circuitry, and use the pin-description table rather than package position alone when assigning PCB tracks. This product page organizes the documented codec capabilities, operating ranges, package information, sourcing path, and engineering guidance into a practical engineering reference. It also identifies where an equivalent part must be reviewed for true pin compatibility instead of being selected solely from similar audio-converter specifications.

Permintaan RFG Kontak
WM8778SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic
WM8778SEDS/V

WM8778SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8778SEDS/V is a 24-bit, 192kHz stereo audio codec with a digital serial audio interface, supplied in a 28-pin SSOP package. The WM8778 is designed for surround-sound processing in home hi-fi, DVD-RW, and other audiovisual equipment. Its combination of stereo conversion, 192kHz operation, and a 28-SSOP footprint makes it suitable for equipment requiring a dedicated multichannel-audio signal path. An audio codec is an integrated circuit that converts digital audio data into analog signals and converts analog audio into digital data. The codec belongs to the audio interface IC and audio converter hierarchy, combining an audio analog-to-digital converter, digital-to-analog converter, digital audio interface, and associated control functions. The WM8778's 24-bit resolution supports high-fidelity digital audio processing while its 192kHz maximum sampling rate supports high-rate source material. The headline specifications of the WM8778SEDS/V are 24-bit audio resolution, operation up to 192kHz, and stereo codec operation in a 28-SSOP package. According to the manufacturer datasheet, the device also includes a stereo multibit sigma-delta DAC with digital audio input word lengths from 16 to 32 bits and sampling rates from 32kHz to 192kHz. A multiplexor allows either an external analog input or DAC playback to be selected for the line outputs. The architecture combines digital audio processing with analog line-level signal paths. Its digital interface provides access to the stereo codec functions, while the DAC section supports source-rate playback and analog input selection. This arrangement can reduce the number of separate converters required in an audiovisual system, although system-level performance still depends on the external analog network, clock architecture, grounding, and power-supply implementation described in the datasheet. Typical uses include home theater and hi-fi surround-sound processing, DVD-RW equipment, and other audiovisual products that require simultaneous stereo or surround-sound conversion functions. The device can also support digital recording paths where a 24-bit converter and 192kHz sampling capability are useful. Its 28-SSOP package supports conventional surface-mount assembly, but designers should follow the manufacturer footprint and land-pattern guidance during PCB layout. When designing around the WM8778SEDS/V, begin with the manufacturer's pin-description table, recommended application circuit, and interface timing diagrams. Pay particular attention to analog grounding, the separation of analog and digital return paths, clock routing, and the placement of bypass capacitors. These measures are especially important when the codec operates next to switching regulators, high-speed digital logic, or long digital-audio interconnects. This product page combines the exact WM8778SEDS/V ordering information with a practical explanation of the codec architecture, verified package data, application guidance, and a drop-in alternative assessment. It is intended to help engineers evaluate the device quickly while still using the manufacturer datasheet as the controlling document for pin assignments, electrical limits, timing, and application-circuit details.

Permintaan RFG Kontak
WM8781GEDS/V - 24-Bit Stereo ADC | Cirrus Logic | Audio
WM8781GEDS/V

WM8781GEDS/V - 24-Bit Stereo ADC | Cirrus Logic | Audio

Cirrus Logic WM8781GEDS/V is a 24-bit, 192 kHz stereo audio ADC with I2S support, supplied in a 20-pin SSOP package. Its headline specifications are a 24-bit conversion resolution, a maximum sampling rate of 192 kHz, stereo conversion capability, and a 2.7 V to 3.6 V analog supply range. The device also supports 384FS master mode according to the manufacturer product information. These characteristics place it in the high-resolution audio ADC category and make it suitable for digital audio equipment requiring simultaneous left- and right-channel conversion. An ADC is an analog-to-digital converter, a mixed-signal integrated circuit that samples an analog audio voltage and produces a corresponding digital representation. Within the wider semiconductor hierarchy, the WM8781GEDS/V is an audio ADC, a type of data-converter IC and interface IC used for digital audio capture. Its I2S interface provides a conventional connection to digital audio processors, while the 24-bit resolution preserves substantially more amplitude detail than lower-resolution converters. The 192 kHz maximum sampling rate supports high-resolution digital audio workflows and exceeds the 48 kHz rate commonly used for CD-quality playback. The 384FS master-mode capability adds clocking flexibility for systems in which the converter must organize digital audio timing. Stereo operation consolidates two audio channels in one package, reducing the number of separate converters needed in a two-channel audio path. The WM8781GEDS/V operates from a 2.7 V to 3.6 V supply and is specified for an operating temperature range of -25°C to +85°C. Its 20-SSOP package is approximately 5.30 mm wide and 0.209 inch, providing a surface-mount implementation for compact audio products. The supplied distributor information does not provide the complete electrical limits, analog input range, clock requirements, pin mapping, or package height. Typical applications include digital recording equipment, professional audio interfaces, consumer playback systems, active loudspeakers, audio expansion modules, and embedded media platforms. The device can sit between analog microphone or line-level front ends and an I2S-capable DSP, codec, or digital audio controller, converting the analog signal before digital processing and storage. Designers should verify the analog input range, common-mode limits, master and slave clock modes, data format, and exposed thermal and supply requirements against the complete manufacturer datasheet before layout. Input and output return paths should preserve low-noise behavior, while decoupling and grounding should prevent converter and digital-interface noise from coupling into the analog section. This page consolidates verified distributor specifications, package information, functional application guidance, and same-family replacement candidates. It also identifies the missing pinout, detailed timing, absolute maximum ratings, and verified pricing data that engineers should obtain from the manufacturer datasheet before releasing a production design.

Permintaan RFG Kontak
WM8782ASEDS/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
WM8782ASEDS/RV

WM8782ASEDS/RV - 24-Bit Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8782ASEDS/RV is a 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 192,000 samples per second, an I2S digital interface, and a 20-pin SSOP package. It operates from a 2.7 V to 5.5 V analog and digital supply range and is specified for temperatures from -40°C to +85°C. The converter is designed for recordable-media equipment that requires two-channel audio capture with high-resolution digital output. An audio ADC converts left- and right-channel analog input voltages into a sequence of digital samples. Within the data-converter hierarchy, the WM8782ASEDS/RV is a stereo delta-sigma ADC: a specialized analog-to-digital converter that uses continuous-time oversampling and digital filtering to produce a serial digital representation of two analog audio channels. Its 24-bit resolution preserves fine amplitude detail, while the I2S interface provides a compact connection to audio processors, codecs, or digital recording systems. The WM8782ASEDS/RV supports stereo line-level inputs and includes an internal front-end operational amplifier capable of accommodating analog input signals above the normal line-level range. FORMAT and IWL control pins provide compatibility with three industry-standard audio interface configurations, allowing the digital word length and interface format to be selected according to the host processor. A power-down mode is also identified in the product listing, which is useful for reducing consumption when recording is inactive. The device combines a 2.7 V minimum operating voltage with 24-bit conversion and a 192 kSPS maximum rate in a compact surface-mount SSOP-20 package. These characteristics position it for consumer and professional audio capture, including multichannel conversion through multiple stereo devices, digital mixing equipment, and recordable-media products. Its operating-temperature range supports applications beyond ordinary room-temperature consumer environments. A typical implementation routes left and right analog sources through the stereo input network, configures FORMAT and IWL for the connected digital interface, and connects the I2S data, clock, and word-select signals to an audio controller. Decoupling close to the supply pins and controlled return paths are essential because high-resolution audio performance depends on a clean analog reference and low-noise digital coupling. The main design trade-off is the resolution and throughput offered in a relatively compact 20-pin SSOP package. Compared with lower-resolution converters, the 24-bit output preserves more dynamic range but requires careful analog conditioning and clock-layout discipline. Compared with higher-channel-count converters, the two-channel architecture is simpler and well matched to a stereo source. This product record combines the manufacturer device description, exact electrical and package details, sourcing status, technical FAQs, and practical implementation guidance. It also highlights where application-specific data such as the complete pin map and internal-reference behavior must be confirmed in the manufacturer datasheet before layout signoff.

Permintaan RFG Kontak
WM8782SEDS/V - 24-Bit 192kHz Stereo ADC | Cirrus Logic
WM8782SEDS/V

WM8782SEDS/V - 24-Bit 192kHz Stereo ADC | Cirrus Logic

Cirrus Logic WM8782SEDS/V is a 24-bit, 192kHz stereo audio analog-to-digital converter with an I2S digital interface, housed in a 20-pin SSOP package. The converter supports two analog input channels, master or slave clocking, and an integrated front-end op-amp for line-level signals. An audio ADC is a semiconductor that converts left and right analog audio voltages into digital words for processing, storage, transmission, or playback. The WM8782 belongs to the broader hierarchy of audio converter, data-converter, analog-to-digital converter, and integrated-circuit families. Its stereo architecture captures two channels simultaneously, while its digital output can feed an audio processor, codec, digital mixer, or digital recording system. The WM8782SEDS/V provides 24-bit resolution and sampling rates from 8kHz to 192kHz. Its sigma-delta ADC architecture supports 32x, 64x, or 128x oversampling, while the output word length can be configured from 16 to 24 bits. FORMAT and IWL control inputs permit operation in standard audio-interface configurations, reducing the need for external logic or a separate digital interface controller. Master and slave clocking schemes are controlled through the M/S input, allowing the converter to work with external master clocks or generate its own audio clock in master mode. The integrated front-end op-amp accepts analog input signals greater than the nominal line-level range, while the two-channel input structure supports stereo source capture. These features make the converter suitable for compact digital audio equipment that requires high-rate conversion without a large external analog front end. Typical uses include consumer recording equipment, digital mixers, multichannel sound-card inputs, media-capture systems, and industrial audio interfaces. The device is also appropriate for projects requiring 192kHz acquisition when the host processor can accommodate the corresponding data rate. Its 20-pin SSOP package supports conventional surface-mount assembly, although careful grounding and decoupling remain essential for audio performance. During layout, place input, output, and decoupling components according to the pin-description table and recommended application circuit in the manufacturer datasheet. The analog input and digital interface paths require a quiet ground strategy, short return paths, and controlled clock routing. Because this converter performs high-resolution signal acquisition, bypassing, grounding, and supply sequencing can influence channel matching and overall signal integrity. This product page combines the device identity, verified technical attributes, lifecycle information, source links, replacement analysis, and practical design guidance. It helps engineers distinguish exact package compatibility from merely similar ADC functions and plan PCB, interface, and sourcing decisions before committing the WM8782SEDS/V to a design.

Permintaan RFG Kontak
WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
WM8783GED/RV

WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8783GED/RV is a 24-bit stereo audio analog-to-digital converter designed for digital audio systems. It accepts single-ended analog line inputs, supports sampling rates up to 96 kSPS, and provides an I2S digital audio interface. The component is housed in an 8-pin SOIC package. The WM8783 belongs to the audio ADC category within the broader analog-to-digital converter and mixed-signal IC hierarchy. Audio ADCs convert continuous analog audio signals into digital sample streams for processing, storage, transmission, or playback. The WM8783 is intended for applications such as set-top boxes, DVD systems, and other consumer audio equipment where stereo line-level signals must be digitized with a compact interface. Key features include 24-bit resolution, a maximum sampling rate of 96 kSPS, stereo analog inputs, and an I2S output interface. The device is described as a compact, low-cost ADC for set-top box and DVD applications. Its stereo input architecture is suitable for two-channel audio acquisition, while the digital output allows direct connection to a digital audio processor, codec, or system interface. The WM8783GED/RV is manufactured on a CMOS process and is therefore susceptible to electrostatic discharge damage during handling. ESD-safe handling procedures are important during soldering, inspection, and production assembly. The device's function is straightforward for an audio converter: analog signals enter through the stereo input pins, are sampled and quantized by the ADC, and are transferred over the I2S interface as digital audio data. Typical applications include set-top box audio paths, DVD player analog input stages, consumer audio receivers, and embedded multimedia systems. The 96 kSPS maximum rate supports high-resolution audio conversion, while 24-bit data provides substantial dynamic range for line-level sources. System designers should verify the analog input range, reference implementation, clocking requirements, and digital interface configuration against the manufacturer datasheet before finalizing the circuit. This page combines the WM8783GED/RV product identity, core ADC specifications, application guidance, and design considerations into a concise engineering reference. It is intended to help engineers identify suitable use cases, plan board-level integration, and evaluate equivalent parts without overlooking pin compatibility, interface requirements, or supply-availability constraints.

Permintaan RFG Kontak