Cirrus Logic Inc.

WM8772SEDS/RV - 24-Bit 6-Channel Audio Codec | Cirrus Logic

MPN: WM8772SEDS/RV ✓ Aktif
SSOP-28 (PDSO28) Package
MOQ: 1 |

WM8772SEDS/RV Ringkasan

The Cirrus Logic WM8772SEDS/RV is a 24-bit, six-channel audio codec with a 192 kHz maximum sampling rate, one ADC, three DACs, and an SPI control interface in a 28-pin SSOP package. It combines a 100 dB ADC signal-to-noise ratio with a 103 dB DAC signal-to-noise ratio, making it suitable for multichannel consumer audio, home entertainment, and active-speaker signal-chain designs.

An audio codec is an integrated circuit that converts between analog audio signals and digital PCM data. The WM8772 belongs to the broader codec hierarchy of interface ICs, audio converters, signal-processing semiconductors, and data-conversion ICs. Its sigma-delta conversion architecture supports high-resolution audio while providing a digital interface for configuration and sample-data transfer. The SPI control connection allows a host processor to program operating parameters and exchange audio data over a compact serial link.

Key features include 24-bit conversion, six-channel operation, support for sampling rates up to 192 kHz, one ADC, three DACs, and separate ADC and DAC signal-to-noise figures of 100 dB and 103 dB. The device uses a 28-SSOP surface-mount package identified as PDSO28, with a body size of 10.20 mm by 5.30 mm and a stated height of 1.75 mm. It is also identified as lead-free, supporting compact, high-density audio equipment designs.

The WM8772SEDS/RV combines an analog audio input path, three digital-to-analog conversion channels, and one analog-to-digital conversion channel in a single device. This integration can reduce the number of separate converters required in a six-channel system. The 103 dB DAC signal-to-noise ratio is 3 dB higher than the 100 dB ADC figure, making the playback paths the device's strongest specified noise-performance area. The 192 kHz capability supports high-resolution source material when the surrounding system clock, digital interface, analog circuitry, and output stage support that rate.

Typical uses include surround-sound receivers, multimedia speakers, digital active speakers, audio docking systems, and embedded playback platforms. In these applications, the codec accepts or generates multiple audio channels while a host processor controls configuration through SPI. The device is also suitable for prototype platforms that need multiple conversion channels without using three separate DAC packages and an additional ADC.

Circuit layout should preserve the integrity of both analog and digital sections. Keep the codec's supply and ground connections close to their package pins, place recommended bypass capacitors at the associated power pins, and route high-speed SPI signals away from sensitive audio inputs. Confirm all supported clock, interface, and bypass-component requirements against the manufacturer datasheet before releasing the PCB layout.

This product page combines the WM8772SEDS/RV's principal conversion specifications with application-specific design guidance, replacement analysis, and a practical view of its SSOP-28 implementation. It is intended to help engineers evaluate codec architecture, interface routing, channel requirements, and PCB integration before selecting a production audio subsystem.

Alternatif penggantian untuk WM8772SEDS/RV — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian WM8772SEDS/RV (sama faktor bentuk dan footprint) — berbeda di dalam Maximum Sampling Rate, Device Type, Digital Interface, Mounting Type, Package Type.

Cirrus Logic Inc.
Device Type: Audio Codec
Digital Interface: SPI
Mounting Type: Surface Mount
Cirrus Logic Inc.
Maximum Sampling Rate: 96 kHz
Device Type: Stereo audio analog-to-digital converter
Digital Interface: I2S

WM8772SEDS/V

✅ Drop-In
Cirrus Logic Inc.
📦 SSOP-28 (PDSO28)
Audio Codec · 24 bit · 192 kHz · 6 channels · 1 ADC · 3 DACs · SPI · Integrated

Kontak untuk harga

Lihat Datasheet →

WM8772SEDS

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SSOP-28 (PDSO28)
Same WM8772SEDS family and 28-SSOP footprint; the base ordering code omits the target suffix, with pack format and commercial terms requiring manufacturer confirmation.

📋 Alternatif referensi (tidak dalam katalog)

WM8772SEDS/RV Rating Maksimal & Karakteristik Listrik

Audio Codec Type 6-channel audio codec
Converter Resolution 24 bit
Maximum Sampling Rate 192 kHz
ADC Count 1 ADC
DAC Count 3 DACs
ADC Signal-to-Noise Ratio 100 dB typical
DAC Signal-to-Noise Ratio 103 dB typical
Conversion Architecture Sigma-delta
Control/Data Interface SPI
Package Type SSOP-28 (PDSO28)
Package Body Size 10.20 mm x 5.30 mm
Package Height 1.75 mm
Tipe Mounting Surface-mount SMD
Number of Functions 1 function
Process Technology CMOS
Lead-Free Status Lead-free
Qualification Standard MO-150AH

WM8772SEDS/RV 1.75 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk WM8772SEDS/RV (1.75 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 1.75 mm untuk WM8772SEDS/RV

Tidak ada data diatribut pin yang tersedia untuk WM8772SEDS/RV.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

WM8772SEDS/RV cocok untuk 6 aplikasis: Home Theater Audio Receiver, Digital Active Speaker, Multimedia Docking System, USB High-Resolution Audio Interface, Network Audio Player, Digital Recording and Playback Console.

🎧

Home Theater Audio Receiver

The WM8772SEDS/RV suits a multichannel home-theater front end that requires a 24-bit sigma-delta audio interface and digital-to-analog conversion up to 192 kHz. Its three DAC channels can generate playback signals for main, center, and surround channels, while the single ADC supports return or monitoring audio when the system architecture requires it. The 103 dB typical DAC signal-to-noise ratio provides a 3 dB advantage over the 100 dB ADC figure. A host processor can configure the codec and exchange PCM data through SPI. Engineering checks include matching the required six-channel architecture, providing a stable clock source, and routing outputs into appropriately designed amplifier stages.

🔊

Digital Active Speaker

The WM8772SEDS/RV can serve as the conversion and control element in a digital active-speaker platform. A digital audio source sends PCM data to the host controller, which configures the codec through its 24-bit SPI interface. The three DAC channels support multiway speaker playback or zone routing, and the maximum 192 kHz sampling capability allows high-resolution streams when the source, clocking, and amplifier chain support them. The integrated one-ADC, three-DAC arrangement also reduces converter count. Designers should verify output routing, channel muting requirements, analog output loading, and thermal conditions in the chosen speaker electronics.

📱

Multimedia Docking System

A compact multimedia dock can use the WM8772SEDS/RV to combine high-resolution playback with a return-audio path. The three DACs provide 24-bit output channels for music playback, while the ADC captures a mono return or monitoring path at rates up to 192 kHz. This mixed-signal function is implemented in one 28-SSOP package rather than separate converter packages. The SPI connection integrates naturally with a system controller that handles source selection, volume control, and digital routing. Layout attention should remain on separating analog input traces from SPI and clock signals while maintaining low-impedance supply and ground connections.

🖥️

USB High-Resolution Audio Interface

The WM8772SEDS/RV can form the conversion section of a high-resolution USB audio interface when its three DAC outputs and one ADC match the product's channel plan. A USB-capable controller receives digital audio and uses SPI to configure the codec, while the WM8772 performs 24-bit sigma-delta conversion at rates up to 192 kHz. Its 100 dB typical ADC signal-to-noise ratio supports a high-quality capture path, and the 103 dB typical DAC figure supports cleaner playback conversion. The implementation must address clock synchronization, supported digital formats, analog gain structure, and USB-class latency rather than relying on channel count alone.

🌐

Network Audio Player

The WM8772SEDS/RV is appropriate for a network audio player that decodes high-resolution streams and converts the resulting PCM data into analog playback channels. Its three DACs support multi-channel or multi-zone output, while the 24-bit interface and 192 kHz maximum rate align with high-resolution source material. The SPI control path allows a network processor or digital audio controller to select operating modes and route channels. Design priorities include a low-jitter clock source, stable analog supplies, short output paths, and protection appropriate to the external connectors and downstream amplifiers.

🎛️

Digital Recording and Playback Console

A digital recording console can use the WM8772SEDS/RV where one analog input and three analog outputs are sufficient. The ADC captures a mono monitoring or instrument channel, and the DACs provide three playback paths at resolutions up to 24 bit and sample rates up to 192 kHz. The 100 dB ADC and 103 dB DAC signal-to-noise ratios give the converter subsystem consistent performance across capture and playback. A control processor manages SPI configuration and synchronization. Designers should confirm whether the required input type, gain range, clock source, and output topology align with the codec, and should evaluate analog filtering carefully at the highest supported sample rates.

What is the WM8772SEDS/RV?
The WM8772SEDS/RV is a Cirrus Logic 24-bit, six-channel sigma-delta audio codec with one ADC, three DACs, an SPI interface, and operation up to 192 kHz. The manufacturer product information identifies the device as a 6-channel codec in a 28-pin SSOP package. Its primary role is converting analog audio to digital PCM data and generating three analog playback channels, making it suitable for compact multichannel consumer-audio systems.
What are the key specifications of WM8772SEDS/RV that engineers should know?
The WM8772SEDS/RV provides 24-bit conversion, up to 192 kHz sampling, one ADC, three DACs, and an SPI interface. According to the manufacturer product information, ADC signal-to-noise ratio is 100 dB typical, while DAC signal-to-noise ratio is 103 dB typical. The device is packaged in a lead-free 28-SSOP, designated PDSO28, measuring 10.20 mm by 5.30 mm with a height of 1.75 mm.
Where can I download the WM8772SEDS/RV datasheet PDF?
The WM8772SEDS/RV datasheet PDF is available through the Cirrus Logic WM8772 product page linked on this page. Use the manufacturer's pin-description table, electrical-characteristics tables, application circuit, and recommended-layout diagrams when assigning PCB tracks. The part is a 28-pin SSOP with an SPI interface, 24-bit conversion, one ADC, and three DACs; confirm clocking, supply, and analog-interface details against the current manufacturer document before layout release.
Where can I find the WM8772SEDS/RV pinout?
The WM8772SEDS/RV pinout is found in the pin-description section of the manufacturer WM8772 datasheet. The component uses a 28-pin SSOP package, designated PDSO28, so its footprint has 28 electrical positions. Use the datasheet pin-description table and package drawing for exact signal names, exposed functions, and no-connect assignments; do not infer pin functions from another member of the WM8772 family.
What is the difference between WM8772SEDS/RV and WM8772SEDS/V?
The WM8772SEDS/RV and WM8772SEDS/V identify ordering variants associated with the WM8772 28-SSOP audio codec. The available product listing identifies the target as a 24-bit, 192 kHz, six-channel codec using SPI, while another listing identifies the /V ordering code. Confirm the manufacturer ordering table before substituting because suffix codes can distinguish packing method, temperature grade, or other commercial attributes even when the underlying circuit and footprint are the same.
Can WM8772SEDS/V replace WM8772SEDS/RV?
The WM8772SEDS/V may share the WM8772SEDS/RV circuit family and 28-SSOP footprint, but the manufacturer ordering table must be checked before treating it as a drop-in replacement. Ordering suffixes can specify packing method or other commercial parameters even when electrical compatibility is unchanged. For a no-change PCB assembly, verify package dimensions, pin functions, temperature grade, supply requirements, and the exact shipment format required by production.
What is the best drop-in replacement for WM8772SEDS/RV?
No independently verified cross-manufacturer drop-in replacement for the WM8772SEDS/RV was identified. A same-family WM8772 ordering variant may fit the 28-SSOP footprint, but it must be confirmed as pin-to-pin and functionally equivalent in the manufacturer's ordering information. The target integrates one ADC, three DACs, a 24-bit sigma-delta conversion path, and SPI control; a converter that differs in channel count or interface cannot serve as a drop-in substitute.
Is the WM8772SEDS/RV suitable for a home-theater receiver?
The WM8772SEDS/RV is suitable for multichannel home-theater audio when its one ADC and three DAC channels meet the required signal-flow needs. It supports 24-bit conversion at rates up to 192 kHz, with 100 dB typical ADC signal-to-noise ratio and 103 dB typical DAC signal-to-noise ratio. Its SPI interface allows a system controller to configure the codec and transfer digital audio data. Analog routing, speaker amplification, clocking, and channel-count requirements must still be satisfied elsewhere in the design.
When should I choose WM8772SEDS/RV over a discrete audio converter design?
Choose the WM8772SEDS/RV when the design needs one ADC and three DAC channels within a single 28-SSOP device. Its integrated 24-bit sigma-delta architecture can reduce converter-package count and simplify multi-channel PCB routing relative to three separate DACs plus an ADC. The tradeoff is a fixed mixed-signal feature set: systems needing different channel counts, another digital interface, or broader converter performance may require a more specialized codec.
What is the ADC and DAC signal-to-noise performance of WM8772SEDS/RV?
The WM8772SEDS/RV has a 100 dB typical ADC signal-to-noise ratio and a 103 dB typical DAC signal-to-noise ratio. According to the manufacturer product information, the device uses sigma-delta conversion and supports sample rates up to 192 kHz. The DAC figure is 3 dB higher than the ADC figure, making playback performance slightly stronger. Realized system noise also depends on analog gain, reference or clock design, PCB grounding, and the surrounding output stage.
Does WM8772SEDS/RV need an external host processor?
The WM8772SEDS/RV uses an SPI interface for configuration and digital-audio communication, so it is normally paired with a host processor, digital audio controller, or application processor. The codec converts audio data but does not constitute a complete playback system. A practical design must also provide the required clocking, digital audio source, analog input or output routing, speaker amplification where applicable, power supplies, and system control firmware.
What is the power and thermal consideration for WM8772SEDS/RV?
The WM8772SEDS/RV requires a complete power-budget review because supply current, analog and digital supply rails, and package thermal limits must be confirmed from the manufacturer datasheet. Estimated: P_DISSIPATION equals the sum of each rail's voltage multiplied by its operating current. Apply that result to the SSOP-28 thermal resistance and the maximum PCB copper area. Keep analog and digital supply paths localized and place bypass capacitors at the corresponding package pins.
Is WM8772SEDS/RV in stock and what is its lead time?
Current stock and lead time for the WM8772SEDS/RV should be confirmed through the Request a Quote form on this page. The product listings identify the component as an active 24-bit, six-channel codec, but availability can change with the required quantity, date code, packaging method, and regional supply. Include the exact MPN, reel quantity, target annual usage, and required delivery date when requesting a quotation and lead-time confirmation.
What is the price of WM8772SEDS/RV?
The current unit price for WM8772SEDS/RV is obtained through the Request a Quote form on this page. Quote requests should include the exact MPN, required reel quantity, date-code preference, shipping destination, and target schedule. Because pricing and lead time can vary with order quantity and supply conditions, engineers should use the structured offer rather than a historical catalog amount when preparing a production BOM.
Where can I buy WM8772SEDS/RV online?
Use the Request a Quote form on this page to inquire about WM8772SEDS/RV availability, current pricing, and delivery timing. Specify whether the required format is tape and reel and provide the desired order quantity, shipment destination, and date-code requirements. The exact suffix /RV should be retained in the request so the quotation and shipment match the 24-bit, six-channel, 28-SSOP codec configuration.
How should the WM8772SEDS/RV PCB layout separate analog and digital signals?
The WM8772SEDS/RV layout should keep analog audio inputs, digital audio signals, SPI traces, supply connections, and ground returns organized to minimize coupling. Route SPI and other fast digital signals away from sensitive analog pins, place bypass capacitors close to their intended package pins, and use a continuous ground reference beneath the device where the package drawing permits it. Follow the manufacturer application circuit and recommended-land-pattern details for final component placement.

Data referensi engineering untuk WM8772SEDS/RV — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the WM8772SEDS/RV when a design requires exactly one ADC and three DACs, 24-bit conversion, operation up to 192 kHz, and an SPI connection to a host processor. It is especially useful in compact multichannel playback equipment where replacing three DAC packages and an ADC with one mixed-signal codec simplifies the design. Select a different converter if the channel count, digital interface, analog input topology, clocking, or performance target differs; matching the package alone is not enough. The WM8772SEDS/V and WM8772SEDS family codes may be considered after confirming their manufacturer ordering attributes. No cross-manufacturer drop-in replacement is established here, so a functional equivalent should not be substituted without a full pin, electrical, and interface review.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini WM8772SEDS/V WM8772SEDS
Package SSOP-28 (PDSO28) SSOP-28 (PDSO28) SSOP-28 (PDSO28)
Brand Cirrus Logic Cirrus Logic Cirrus Logic
Converter Resolution 24 bit 24 bit 24 bit
Maximum Sampling Rate 192 kHz 192 kHz 192 kHz
ADC Signal-to-Noise Ratio 100 dB typical 100 dB typical 100 dB typical
DAC Signal-to-Noise Ratio 103 dB typical 103 dB typical 103 dB typical
ADC and DAC Count 1 ADC / 3 DACs 1 ADC / 3 DACs 1 ADC / 3 DACs
Digital Interface SPI SPI SPI
Conversion Architecture Sigma-delta Sigma-delta Sigma-delta

Diferensiator Kunci

  • Multiple conversion functions in one package (vsWM8772SEDS/V)
  • Higher specified playback noise performance than capture performance (vsWM8772SEDS)
  • Compact mixed-signal integration (vsWM8772SEDS/V)

Catatan Desain

Separate the analog and digital signal paths on the PCB. Place bypass capacitors at the codec's supply pins with short, low-inductance connections, and route SPI, clock, and data signals away from the analog audio inputs. Keep the analog ground and digital return strategy consistent with the manufacturer reference layout. The SSOP-28 footprint is narrow, so check pad access, component spacing, and solder-assembly clearance before placing decoupling capacitors or other high-frequency parts.

Treat clock and SPI routing as high-speed digital interfaces even though the codec also carries analog audio. Use a continuous reference plane, avoid unnecessary stubs, and match digital traces to the impedance of the connected host board where required. Audio performance at 192 kHz depends on clean conversion and output circuitry as well as the codec itself. Verify the supported clock, sample-rate, and data-format combinations in the manufacturer datasheet before fixing the digital interconnect.

Do not select the device solely by its six-channel description. The specified converter arrangement is one ADC and three DACs, and the control and data path is SPI. Confirm that analog input range, DAC output topology, required clocks, power rails, and channel routing match the system. Also verify the meaning of ordering suffixes before changing /RV to another code, because packing method, temperature grade, or other commercial attributes can differ even when the circuit family is shared.

Estimated: P_DISSIPATION equals the sum of analog and digital supply voltage multiplied by the corresponding operating current. Compare that result with the allowed junction-temperature rise for the 28-SSOP package on the intended PCB area. The calculation requires the actual rail voltages, supply currents, ambient temperature, and package thermal resistance from the manufacturer datasheet. Use copper for heat spreading where the layout permits, but do not extend copper beneath analog nodes without following the recommended grounding arrangement.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The product listing identifies WM8772SEDS/RV as lead-free and associates it with MO-150AH. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified.

Pencarian Terkait

WM8772SEDS/RV WM8772SEDS/RV datasheet WM8772SEDS/RV pinout WM8772SEDS/RV datasheet pdf WM8772SEDS/RV equivalent WM8772SEDS/RV replacement WM8772SEDS/RV SSOP-28 WM8772SEDS/RV 24-bit codec WM8772SEDS/RV 192kHz audio codec WM8772SEDS/RV price WM8772SEDS/RV stock Cirrus Logic WM8772SEDS/RV WM8772SEDS/V vs WM8772SEDS/RV WM8772SEDS/RV application circuit

Komponen dan Istilah Terkait

Cirrus Logic WM8772SEDS/RV WM8772SEDS/V WM8772SEDS audio codec audio interface IC mixed-signal semiconductor ADC DAC sigma-delta converter 24-bit audio conversion SPI PCM audio signal-to-noise ratio 192 kHz sampling rate SSOP-28 PDSO28 surface-mount package lead-free packaging MO-150AH home theater digital active speaker USB audio interface network audio player
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ