Produk (44.000+)

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
XMC4500F100F1024AC

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon

The Infineon XMC4500F100F1024AC is a 32-bit industrial microcontroller from the XMC4000 family, integrating an ARM Cortex-M4 core with FPU running at 120 MHz, 1024 KB of embedded Flash, and 160 KB of RAM in a 100-pin LQFP package. It is engineered for energy-efficient industrial applications including digital power conversion, motor control, and industrial connectivity. An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy. Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch. The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs. Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control. When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader. This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.

Permintaan RFG Kontak
XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100F1024ACXQMA1

XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F100F1024ACXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 1 MB of flash memory and integrated Ethernet connectivity, housed in a 100-pin PG-LQFP-11 package. The device combines a high-performance Cortex-M4 processor core with a configurable peripheral set for industrial automation, networking, and embedded control systems. A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, communications interfaces, and analog blocks. The XMC4500 belongs to the Arm Cortex-M4 microcontroller family and the Infineon XMC4000 industrial microcontroller series. Its position in the embedded hierarchy is processor core to microcontroller to embedded control platform, combining deterministic real-time control with Ethernet-connected industrial equipment. The principal device characteristics include a 120 MHz operating frequency, 1 MB of flash storage, 32-bit processing, and a 3.3 V supply indicated by the ordering designation. The configurable peripheral architecture allows designers to tailor timer, communication, and interface resources around an industrial application. The 100-pin LQFP package provides a conventional surface-mount option with exposed-pad construction for improved thermal performance. Technical operation centers on the Arm Cortex-M4 processor core, which uses the ARM instruction set and supports efficient interrupt-driven control. Integrated Ethernet supports network-connected industrial equipment, while the extensive peripheral set reduces the need for external interface devices. The manufacturer describes the XMC4500 as an energy-efficient industrial platform combining leading peripheral capabilities with the Cortex-M4 core. Typical uses include industrial Ethernet controllers, programmable logic controllers, factory automation nodes, building automation interfaces, and embedded robotics. In each case, the 120 MHz processing rate supports responsive control logic, 1 MB of flash accommodates embedded firmware, and Ethernet allows status reporting or distributed control over an industrial network. PCB design should follow the manufacturer pin-definition table and recommended decoupling guidance for the 100-pin exposed-pad LQFP. The exposed thermal pad requires a solder-flooded PCB land and adequate thermal-via distribution to transfer heat into the board structure. Firmware configuration should also follow the ordering-information matrix because XMC4500 derivatives differ in available peripherals and temperature options. This product page consolidates the exact ordering designation, manufacturer specifications, package information, practical PCB guidance, and verified drop-in ordering-code alternatives. It also distinguishes configurable industrial features that are shared across the XMC4500 family from the specific package and ordering code of XMC4500F100F1024ACXQMA1.

Permintaan RFG Kontak
XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA

XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 kByte of embedded Flash and an Ethernet MAC, supplied in a 100-pin LQFP package with an exposed pad. The device is identified in distributor data as the 3.3 V, 100-pin LQFP version of Infineon's XMC4000 family and is intended for energy-efficient industrial applications. An industrial microcontroller is a semiconductor integrated circuit that combines a processor core, embedded nonvolatile memory, communication peripherals, timers, and I/O interfaces on one device. The XMC4500 belongs to the XMC4000 family and uses the ARM Cortex-M4 architecture, placing it in the hierarchy of 32-bit MCU, microcontroller, embedded processor, and semiconductor. Its configurable peripheral set allows an industrial control design to combine real-time processing with Ethernet-connected equipment. The verified device data identifies three principal performance points: a 120 MHz Cortex-M4 core, 768 kByte of Flash, and integrated Ethernet MAC support. The Cortex-M4 platform supports efficient control-oriented software, while the larger Flash capacity accommodates networking stacks, control algorithms, diagnostics, and application firmware. The Ethernet MAC makes the MCU suitable for connected industrial systems without requiring a separate network controller solely for Ethernet interface management. Infineon describes the XMC4500 as combining a leading-edge peripheral set with the industry-standard ARM Cortex-M4 core. This combination targets energy-efficient industrial equipment where deterministic embedded control, communications, and configurable peripherals must coexist in one package. Distributor records further identify the target as the industrial XMC4000 MCU in a PG-LQFP-100-11 configuration. Typical uses include industrial Ethernet controllers, connected factory equipment, industrial automation modules, embedded network bridges, and real-time supervisory controllers. In these systems, the 120 MHz processor can service communications and control tasks, while the 768 kByte Flash provides room for protocol stacks and firmware. The Ethernet MAC is especially relevant to machinery monitoring, networked sensors, and supervisory control equipment. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and startup sequence against the Infineon XMC4500 datasheet before layout release. The verified snippets do not enumerate all 100 pin names, so this page does not infer individual pin functions. Board design should preserve the manufacturer's recommended land pattern and exposed-pad implementation rather than treating the package as a generic LQFP. This page combines verified manufacturer and distributor facts, same-family drop-in candidates, price information available on 2026-10-30, and practical qualification guidance. It also distinguishes confirmed specifications from data that must be obtained from the full manufacturer datasheet, helping engineers evaluate the XMC4500F100F768ACXQMA without relying on incomplete catalog descriptions.

Permintaan RFG Kontak
XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA1

XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating up to 120 MHz, with 768 kB of embedded flash memory, 160 kB of RAM, and integrated Ethernet MAC, CAN, and LIN interfaces. It is supplied in a 100-pin PG-LQFP-11 package for industrial embedded control applications. A microcontroller is a programmable system-on-chip that combines a processor core, memory, and dedicated peripherals in one integrated device. The ARM Cortex-M4 core provides efficient real-time instruction execution, while the XMC4500 family adds configurable peripherals for industrial communications and mixed-signal control. This XMC4500 variant combines Ethernet MAC connectivity with CAN and LIN networking, making it suitable for connected industrial equipment. Key device characteristics include a maximum clock frequency of 120 MHz, 768 kB of flash for firmware storage, 160 kB of SRAM for working data, and operation from a 3.3 V supply. The ordering code XMC4500F100F768ACXQMA1 identifies the 768 kB flash configuration in the LQFP-100 industrial package. The Infineon product page identifies the base XMC4500-F100F768-AC ordering designation as an industrial ARM Cortex-M4 device with Ethernet MAC. The XMC architecture provides a configurable peripheral set that allows engineers to tailor analog, timing, communications, and digital control resources to the target application. Ethernet MAC support supports network-connected industrial nodes, while CAN and LIN interfaces enable connection to fieldbus and automotive-style vehicle networks. At 120 MHz, the Cortex-M4 core also provides sufficient performance for real-time control loops, data acquisition, and protocol handling. Typical uses include industrial Ethernet controllers, motor and power conversion systems, factory automation equipment, CAN and LIN network nodes, and industrial sensors that require substantial local memory. The 768 kB flash capacity reduces the need for external program memory in firmware-intensive control systems, while 160 kB of RAM supports buffering and communication stacks. When laying out the board, route the exposed-pad and ground connections according to the manufacturer land-pattern and thermal guidance in the XMC4500 datasheet. Confirm the power-supply design against the 3.13 V to 3.63 V operating range listed for this ordering code, and verify every pin function and alternate-function assignment against the package-specific pin table before routing. This page combines manufacturer and distributor product information with practical configuration guidance, package details, sourcing information, and design considerations. The comparison and selection notes help engineers evaluate the exact XMC4500 ordering code against other Infineon XMC industrial microcontroller options while avoiding assumptions about unverified pin compatibility.

Permintaan RFG Kontak
XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100K1024AAXQSA1

XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon

The Infineon Technologies XMC4500F100K1024AAXQSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 1024 kByte of flash memory and integrated Ethernet connectivity, in a 100-pin PG-LQFP package. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The XMC4500 belongs to the XMC4000 family of 32-bit ARM microcontrollers. Its hierarchy is ARM Cortex-M4 microcontroller, embedded processor, and programmable control IC. The XMC4000 family combines the ARM Cortex-M4 core with a configurable peripheral set intended to support application-specific industrial control systems. Three headline specifications define the XMC4500F100K1024AAXQSA1: a 120 MHz Cortex-M4 core, 1024 kByte of flash memory, and Ethernet connectivity. The flash is organized as 1 MB, or 1M by 8 bits, according to distributor product listings. These characteristics make the device suitable for industrial embedded systems that require deterministic control processing, substantial local program storage, and network communication. The part belongs to the XMC4500-F100x1024 device group, whose manufacturer datasheet covers ordering designations, electrical characteristics, physical characteristics, and supported peripheral functions. The manufacturer describes the XMC4000 platform as combining an ARM Cortex-M4 core with a configurable peripheral set. That architecture allows designers to tailor the controller around particular measurement, communication, and industrial-control requirements rather than relying on a fixed peripheral arrangement. Typical uses include industrial Ethernet equipment, factory automation controllers, connected sensor hubs, building automation equipment, and industrial data-acquisition systems. The Ethernet interface supports connected control architectures, while the 120 MHz Cortex-M4 processing capability is suited to real-time supervisory and control tasks. The 1024 kByte flash also provides practical space for application firmware, configuration data, and field-upgrade handling within a single embedded device. The 100-pin LQFP package provides a substantial pin count for mixed-signal and peripheral-heavy industrial designs. Board layout should preserve the pin-oriented package geometry and route sensitive analog or communications signals away from high-current switching paths. Firmware selection and peripheral configuration should be validated against the exact ordering code and pin multiplexing table in the manufacturer datasheet before production release. This page combines the exact ordering information, package details, memory configuration, processor capability, and Ethernet feature with application guidance, engineering considerations, and a focused drop-in comparison. It is intended to help engineers determine whether the XMC4500F100K1024AAXQSA1 fits an industrial embedded design before beginning PCB implementation.

Permintaan RFG Kontak
XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon
XMC4500F100K1024ACXQSA1

XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon

The Infineon XMC4500F100K1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller in the XMC4000 family, delivering 120 MHz core performance with 1024 KB on-chip Flash and 160 KB SRAM in a 100-pin PG-LQFP package. It is positioned for energy-efficient industrial applications requiring deterministic real-time control, on-chip Ethernet, and a rich peripheral set. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with DSP extensions and a single-precision floating-point unit (FPU). It sits within the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7) of energy-efficient processors used in embedded systems. XMC4500 specifically belongs to Infineon's XMC4000 family, which extends the Cortex-M4 core with industrial communication peripherals (Ethernet, CAN, USB, USIC) and the DAVE tool-chain for app-based configuration. Key differentiating features of the XMC4500 include: ARM Cortex-M4 core with FPU at 120 MHz; 1024 KB embedded Flash and 160 KB SRAM; on-chip 10/100 Mbps Ethernet MAC for industrial networking; multiple CAN nodes and USB 2.0 Full-Speed OTG; six 4-channel USIC (Universal Serial Interface Channel) modules configurable as UART, SPI, I2C, I2S, or LIN; 12-bit ADC, up to four CCU6 timer units for motor/PWM control; and an operating voltage range of 3.0 V to 3.6 V with -40 °C to +85 °C industrial temperature support. Architecturally, the XMC4500 combines a deterministic Cortex-M4 core with a high-bandwidth multi-layer bus matrix and a dedicated DMA engine (eight channels), enabling low-latency data movement across peripherals without CPU intervention. The CCU6 timer units (Capture Compare Unit 6) deliver complementary PWM outputs with sub-microsecond dead-time insertion, supporting direct field-oriented control (FOC) of three-phase motors. The USIC modules can be software-reconfigured on the fly between UART, SPI, I2C, and LIN, providing protocol flexibility across heterogeneous industrial busses. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), PLC and industrial automation controllers, building automation gateways, solar inverter controllers, multi-protocol industrial sensors, and EtherCAT/CANopen slave nodes. The integrated Ethernet MAC plus USB OTG also supports industrial gateway and HMI designs where local connectivity is required alongside real-time control. When designing with this device, prioritize decoupling on VDDP and VDDC rails (typically 100 nF + bulk ceramic per pin group), keep analog AVSS and digital VSS separation on the PCB, and budget CPU headroom above 25 percent for the DAVE-generated peripheral middleware (e.g., TCP/IP stack, EtherCAT slave library). For motor-drive designs, route the CCU6 outputs to the gate drivers with matched trace lengths to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in any single source, including specific parameter comparisons against other XMC4500 family members (XMC4502, XMC4504, XMC4400) and competitor Cortex-M4 MCUs.

Permintaan RFG Kontak
XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K1024ACXUMA1

XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100K1024ACXUMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller with a 120 MHz clock, 1 MB of embedded Flash, integrated Ethernet connectivity, and a 100-pin PG-LQFP package with exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller performance with industrial communications and embedded networking capabilities. A microcontroller is a semiconductor device that integrates a processor core, memory, programmable peripherals, and communication interfaces onto one package. The Cortex-M4 processor belongs to the Arm embedded processor family and executes instructions from tightly controlled memory while supervising timers, serial interfaces, analog peripherals, Ethernet, and external interrupt sources. Within the system hierarchy, this device is a microcontroller, embedded processor, programmable controller, and power-management-aware semiconductor. The XMC4500F100K1024ACXUMA1 provides 1 MB of Flash memory, a 120 MHz maximum CPU frequency, and 32-bit processing in an industrial-oriented package. Its Ethernet support makes the device suitable for connected equipment that must exchange data over a wired network. The exposed pad beneath the PG-LQFP-100-11 package provides a direct thermal path from the die to the PCB, allowing heat to be removed through copper and, where necessary, an external heat spreader. The Arm Cortex-M4 architecture is designed for efficient embedded control and signal-processing workloads. Its exception model supports deterministic interrupt handling, while integrated peripherals reduce the need for discrete interface components. The Ethernet subsystem adds a network interface without requiring a separate communication controller. This combination makes the device useful for industrial controllers, gateways, embedded servers, and connected sensor platforms while preserving a single-chip control architecture. Typical applications include industrial Ethernet gateways, programmable automation controllers, building and energy-management equipment, connected sensor hubs, motor and process-control systems, and communications equipment. The 120 MHz processing rate supports responsive control loops, protocol processing, and supervisory logic. The 1 MB Flash capacity allows firmware, configuration data, and application code to be stored locally, reducing system complexity for embedded networking products. PCB implementation should follow the Infineon pin-description table and reference-manual guidance for power, ground, decoupling, and exposed-pad connections. Place input and bulk-decoupling capacitors close to their associated supply pins, provide a low-impedance ground plane, and thermally couple the exposed pad to a sufficiently large copper area. Validate the final board under maximum processor activity, Ethernet traffic, and the highest intended ambient temperature. This product page combines the official ordering information with practical architecture guidance, application fit, package considerations, and parameter-level replacement analysis. It is structured to help engineers identify whether the 120 MHz Cortex-M4 core, 1 MB Flash configuration, Ethernet integration, and 100-pin industrial package align with a specific embedded-control design.

Permintaan RFG Kontak
XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K768ACXQMA1

XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500F100K768ACXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of Flash memory and Ethernet connectivity in a 100-pin LQFP package with an exposed pad. The device supports 1.3 V and 3.3 V operation and is positioned for energy-efficient industrial embedded systems that require CAN, LIN, Ethernet and configurable peripheral resources. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor that combines a processor core with memory interfaces, interrupt control, timers, communication peripherals and other programmable hardware. In the product hierarchy, the XMC4500 belongs to the XMC4000 family of industrial microcontrollers and combines real-time control capability with extensive communications and peripheral integration. It is intended for equipment requiring deterministic control and multiple communication interfaces without a separate external microcontroller. The XMC4500F100K768ACXQMA1 combines a 120 MHz Cortex-M4 core with 768 KB of Flash in an LQFP-100 package. Its configurable peripheral set allows an industrial design to tailor I/O resources to a specific control system. Ethernet support expands the application range to connected industrial equipment, while CAN and LIN connectivity supports communication with sensors, actuators, service tools and other nodes on industrial networks. This integration can reduce the number of discrete interface devices required around the main controller. A Cortex-M4-based architecture supports efficient execution of control tasks, communications stacks and supervisory functions in one device. The 100-pin LQFP package also exposes more I/O than small leadless packages, simplifying assembly for industrial prototypes and production lines equipped for conventional leaded-package soldering. Typical applications include industrial motor drives, motion-control equipment, factory automation controllers, building automation nodes, Ethernet-connected machinery and CAN or LIN network gateways. The combination of 120 MHz processing, 768 KB of Flash and multiple communications options is useful when the controller must manage several real-time loops while exchanging diagnostic or supervisory data. Hardware design should begin with the manufacturer's XMC4500 pin-description table, power and decoupling recommendations, and exposed-pad thermal layout. Place input and bulk capacitors close to their supply pins, connect the exposed pad to the appropriate ground-plane copper, and verify signal levels for all 1.3 V and 3.3 V interfaces before releasing a PCB for production. This product page consolidates the confirmed controller identity, memory capacity, package, voltage options, communications features, sourcing information and design considerations into an engineering-focused reference. The ordering code remains the controlling identifier for package, temperature, qualification and delivery configuration, so designers should compare the complete suffix when qualifying a substitute.

Permintaan RFG Kontak
XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon
XMC4500F1024ACXQMA1

XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon

The Infineon Technologies XMC4500F144F1024ACXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 1 MB of flash memory, and Ethernet connectivity in a 144-pin PG-LQFP package. The device combines a high-performance Cortex-M4 processor with an integrated industrial peripheral set for energy-efficient embedded control. It is supplied for 1.3 V and 3.3 V operation, making it suitable for industrial Ethernet equipment, automation controllers, connected machines, and embedded communication systems. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor within the broader embedded processor and semiconductor hierarchy. The Cortex-M4 architecture is designed for deterministic real-time control, efficient interrupt handling, and energy-efficient execution. Infineon positions the XMC4500 as an industrial member of the XMC4000 family, combining general-purpose embedded processing with communication and configurable peripherals rather than functioning merely as a general-purpose microcontroller. The principal operating characteristics include a 120 MHz clock, 1 MB of flash organized as 1M x 8, 32-bit processing, and integrated Ethernet. Its 144-pin LQFP-13 package provides a high pin count suitable for parallel and digital interfaces. The manufacturer identifies the component as an industrial 32-bit microcontroller with an ARM Cortex-M4 core and 1024 kByte of flash. These characteristics distinguish it from smaller Cortex-M devices that offer fewer pins, less flash, or no integrated Ethernet. The XMC4500 family uses a configurable peripheral concept, allowing designers to tailor the device around communication, timing, serial, and application-specific control requirements. Its Ethernet capability makes the MCU suitable for networked industrial equipment without requiring a separate communications controller. Software development is supported through the Infineon XMC ecosystem and DAVE configuration tooling. Firmware designers should use the XMC4500 reference manual together with the manufacturer datasheet when assigning peripheral functions, pins, clocks, and interrupts. Typical applications include industrial Ethernet switches, motor and motion controllers, factory automation nodes, building automation interfaces, connected sensors, industrial communications equipment, and embedded gateway platforms. For designs requiring more program storage than a 768 kByte alternative, the 1 MB configuration provides additional code and data headroom. For designs whose software organization depends on an external memory interface instead of the F-series internal flash interface, the K-series device may require firmware and board-level review before substitution. A critical implementation consideration is the exposed-pad connection. Infineon specifies that all VSS, VSSA, and VSSO pins share a common ground potential and that the exposed die pad in applicable packages must also connect to common ground. The PCB should therefore provide a low-impedance ground plane, adequate thermal-via distribution, and decoupling close to the supply pins. Pin multiplexing and alternate-function selection must be checked in the datasheet pin table before finalizing the board. This page combines the manufacturer product information, datasheet, reference manual, distributor availability records, and carefully qualified same-package alternatives. It also organizes the device for industrial design decisions by covering the Cortex-M4 architecture, 120 MHz performance, 1 MB flash, Ethernet integration, common-ground construction, and the engineering checks required for an LQFP-144 migration.

Permintaan RFG Kontak
XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F144F768ACXQMA1

XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F144F768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 768 KB of flash memory, 160 KB of SRAM, and a 144-pin LQFP package. It belongs to the XMC4500 industrial microcontroller family and combines deterministic real-time control with Ethernet, CAN, LIN, mixed-signal acquisition, and timer/PWM resources. An industrial microcontroller is a semiconductor designed for embedded control systems that must monitor inputs, execute control algorithms, and manage communications in real time. The XMC4500 family combines an Arm Cortex-M4 processor core with configurable peripherals, analog-to-digital conversion, and communication interfaces. This hierarchy places the device between a general-purpose microcontroller and a highly integrated industrial control platform. The XMC4500F144F768ACXQMA1 provides 768 KB of flash for firmware and 160 KB of SRAM for working memory. Its Cortex-M4 architecture supports 32-bit processing at up to 120 MHz, while the peripheral set includes CAN and LIN networking, Ethernet connectivity, mixed-signal acquisition, and timer/PWM control functions. The extended industrial temperature range of -40°C to +85°C supports operation across commercial and industrial environments. A 144-pin LQFP exposes the device's extensive analog, digital, communications, timer, and debug resources while retaining a surface-mount assembly format. The XMC4500 platform uses a configurable peripheral approach, allowing software developers to organize communication, timing, and acquisition functions around the requirements of a specific machine or controller. Pin assignment, alternate functions, and peripheral routing must be confirmed in the pin-description tables of the manufacturer datasheet. Typical applications include industrial Ethernet controllers, CAN and LIN network gateways, motor-control and timer/PWM platforms, programmable automation equipment, sensor-acquisition systems, and embedded factory communication nodes. The combination of 120 MHz processing, 768 KB of flash, and mixed-signal acquisition makes the device suitable for controls that require both communications bandwidth and deterministic peripheral operation. PCB design should provide a complete low-frequency decoupling network, clean grounding for analog inputs, and careful signal-integrity routing for Ethernet and other communications. Firmware should configure pins, clocks, analog channels, and communication objects explicitly because the XMC4500 uses flexible peripheral multiplexing. The 144-pin package also requires adequate copper area and a thermal-aware layout to support reliable operation near the upper temperature limit. This page organizes the core MCU specifications, practical application fit, comparison points, and design guidance around the XMC4500F144F768ACXQMA1. It also identifies where pin-level and production-qualification decisions require confirmation against the current Infineon datasheet and errata.

Permintaan RFG Kontak
XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K1024ACXQMA1

XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4500F144K1024ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller with 120 MHz maximum clock frequency, 1024 kByte flash memory, and 160 kByte SRAM in a 144-pin LQFP package. It combines an industrial communications-focused microcontroller platform with Ethernet connectivity for connected industrial equipment, automation systems, and embedded network controllers. An ARM Cortex-M4 microcontroller is a 32-bit embedded processing device built around the Cortex-M4 processor core. The MCU hierarchy extends from a general-purpose microcontroller to a real-time embedded controller, with integrated flash, SRAM, digital peripherals, communication interfaces, and interrupt control. Infineon positions the XMC4500 within its XMC4000 family for energy-efficient industrial applications requiring configurable peripherals and Ethernet support. The principal device features include a 120 MHz maximum operating frequency, 1 MB of flash organized as 1M x 8, and 160 kByte of SRAM. Its 144-pin LQFP package provides access to the extensive XMC4500 peripheral set while supporting compact industrial control-board layouts. The ordering designation identifies an industrial-grade XMC4500 configuration with 1024 kByte flash and the XQMA1 package and qualification suffix. The device combines high-frequency Cortex-M4 processing with on-chip memory and a configurable peripheral set. This architecture allows software-defined control functions, communication protocols, and application-specific interfaces to coexist on one component. Ethernet connectivity makes the microcontroller suitable for embedded gateways and industrial network nodes where local control and network communication must be combined without a separate protocol processor. Typical uses include industrial Ethernet controllers, factory automation equipment, networked motor and motion-control systems, building automation interfaces, and industrial communications gateways. The 120 MHz processing rate supports responsive protocol handling and control-loop execution, while 1024 kByte flash provides room for networking stacks, control firmware, diagnostics, and configuration data. PCB designers should assign all 144 package pins directly from the pin-description and package tables in the Infineon XMC4500 datasheet. They should also preserve the manufacturer's recommendations for supply decoupling, clock circuitry, analog interfaces, and exposed-package routing. Firmware must be tested against the exact ordering designation because suffix changes can represent differences in grade, temperature range, qualification, or package configuration. This product page combines the Infineon ordering information, family-level electrical characteristics, package details, and practical replacement guidance into an engineering-focused resource. It supports component identification, board redesign, firmware planning, and cross-reference work for engineers evaluating the XMC4500F144K1024ACXQMA1 in industrial embedded systems.

Permintaan RFG Kontak
XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K768ACXQMA1

XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500F144K768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at up to 120 MHz with 768 KB of flash memory and a 144-pin LQFP package. It is designed for industrial applications requiring deterministic control, mixed-signal acquisition, networking connectivity, and a broad peripheral set in a single device. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and control logic onto one package. The XMC4500 architecture belongs to the hierarchy of embedded processors: ARM Cortex-M4 core, 32-bit microcontroller, XMC4000 family, and industrial embedded control. Its combination of performance and peripheral integration helps reduce the component count in motor-control, communications, and industrial automation systems. Key features include a 120 MHz Cortex-M4 processor, 768 KB of flash storage, 160 KB of RAM, 32-bit processing, and communication functions identified in the product information, including CAN, LIN, and Ethernet. The mixed-signal acquisition capability supports applications where analog measurement and digital control must operate in the same embedded platform. The industrial-grade ordering designation is associated with the XMC4500-F144K768-AC family. The device uses an industry-standard ARM Cortex-M4 processor core and a configurable peripheral set intended for energy-efficient industrial applications. At 120 MHz, it provides substantially greater computation headroom than slower general-purpose microcontrollers, while the integrated communications and analog resources reduce the need for separate interface devices. Designers should still verify peripheral availability, pin multiplexing, electrical limits, and package details against the Infineon XMC4500 datasheet before finalizing a PCB. Typical applications include industrial motor control, CAN and LIN network nodes, Ethernet-connected automation equipment, factory sensor hubs, power conversion controllers, and embedded industrial gateways. The XMC4500 is particularly appropriate when local control, communications, and analog acquisition are required in a single controller rather than across multiple discrete devices. The primary design consideration is package and pin planning. The 144-pin LQFP footprint requires a land pattern matching the PG-LQFP-144-13 package, careful escape routing, and adequate decoupling near the supply pins. Engineers should also review clock configuration, communication peripheral multiplexing, and the recommended operating ranges in the manufacturer datasheet before production release. This page combines the manufacturer datasheet, distributor product listings, package information, and engineering-oriented application guidance to make the XMC4500F144K768ACXQMA1 easier to evaluate for industrial embedded designs. The exact ordering information, electrical characteristics, lifecycle status, and peripheral configuration should be confirmed against the current Infineon documentation before procurement.

Permintaan RFG Kontak
XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon
XMC4502-F100F768AB

XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4502-F100F768AB is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 kB of flash memory and an Ethernet MAC, supplied in a PG-LQFP-100-11 package. It belongs to the XMC4000 industrial microcontroller family and targets real-time embedded systems where deterministic control, networking, and peripheral integration are important. The verified product information identifies the device as an industrial ARM Cortex-M4 microcontroller; additional electrical, memory, and peripheral details must be confirmed from the manufacturer datasheet. A microcontroller is a compact embedded computing component that integrates a processor core, memory, communication interfaces, timers, analog and digital peripherals, and power-management functions on one semiconductor die. The Cortex-M4 core provides a 32-bit processing architecture commonly used in industrial automation, communications, motor control, and connected equipment. The XMC4000 family combines this general-purpose core with configurable peripherals intended for real-time control applications. The XMC4502-F100F768AB provides three headline identifiers from the verified data: a 120 MHz operating frequency, 768 kB of flash memory, and integrated Ethernet MAC capability. Its 32-bit Arm Cortex-M4 architecture supports software-controlled system operation, while the XMC4500 family is identified by Arm Keil documentation as a 120 MHz Cortex-M4 device in the XMC4000 sub-family. The package designation PG-LQFP-100-11 identifies a 100-lead LQFP package for PCB integration. The XMC4502-F100F768AB is suited to industrial automation systems that require local control and network connectivity. The Ethernet MAC can support network-connected equipment when paired with the required external interface circuitry and stack. The 120 MHz core provides processing headroom for control loops, communication handling, and supervisory logic. The verified search results also associate the device with industrial automation and XMC-FB applications, but exact peripheral assignments, electrical limits, and pin functions require review of the official Infineon documentation. Typical design work should begin with the package footprint, pin multiplexing, clock configuration, memory map, and Ethernet physical-layer requirements. Because this is a 100-pin LQFP MCU, PCB layout must preserve adequate clearance around fine-pitch leads and provide reliable power, ground, decoupling, and signal-integrity connections. Firmware and tool selection should be checked against the XMC4000 device family pack and the exact ordering variant before production release. This page consolidates the verified manufacturer-family description, distributor identification, package information, tool references, and sourcing links for XMC4502-F100F768AB. It intentionally avoids filling unprovided pin, electrical, temperature, and pricing fields with assumptions; those values should be obtained from the current manufacturer datasheet or an authorized quotation. For a complete design decision, compare the verified 120 MHz, 768 kB flash, Cortex-M4, Ethernet MAC, and PG-LQFP-100-11 characteristics against the system clock, network, memory, package, and qualification requirements. XAIPART can be contacted for availability, pricing, and datasheet support using the MPN.

Permintaan RFG Kontak
XMC4502-F100K768AB 120MHz 768KB MCU | Infineon
XMC4502-F100K768AB

XMC4502-F100K768AB 120MHz 768KB MCU | Infineon

The Infineon XMC4502-F100K768AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 768 KB of flash memory and a PG-LQFP-100-11 package. It is designed for real-time industrial control applications requiring deterministic processing, Ethernet connectivity, and a broad peripheral set. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARM architecture, combining a processor core, memory, interrupt handling, and peripherals on one integrated circuit. The XMC4500 family belongs to the industrial microcontroller hierarchy and is positioned between general-purpose embedded processors and more specialized control devices. Its role is to execute control software while managing communication, timing, analog, and digital I/O functions in equipment such as industrial controllers and connected automation systems. The verified product information identifies the device as an ARM Cortex-M4 XMC4000-series microcontroller with 120 MHz processing and 768 KB flash. The part is listed in a PG-LQFP-100-11 package, a 100-pin plastic low-profile quad flat package. The package provides a large number of external pins for power, ground, debug, communications, timers, analog functions, and digital I/O. Additional details such as SRAM size, operating voltage range, temperature limits, and Ethernet transceiver specifications are not provided in the retrieved data and therefore require confirmation from the manufacturer datasheet. The XMC4500 family is intended for real-time critical systems, where predictable control response and integrated peripherals can reduce the need for separate interface components. According to the retrieved Infineon product information, the family is associated with industrial ARM Cortex-M4 devices for real-time applications. The Cortex-M4 platform is widely used for embedded control because it supports efficient interrupt-driven software and a broad software ecosystem, including CMSIS-based development workflows. Typical applications include industrial automation equipment, Ethernet-connected control systems, motor and motion-control platforms, building automation controllers, communications equipment, and test systems. The available MPN is especially relevant where a 120 MHz core, 768 KB flash configuration, and 100-pin package are required together. Selection should account for the exact peripheral set, memory map, electrical limits, pin multiplexing, package dimensions, and software support required by the target product. For PCB implementation, treat the PG-LQFP-100-11 footprint and pin multiplexing as design-controlled constraints. Confirm the manufacturer's land pattern, exposed-pad or thermal requirements, decoupling recommendations, and recommended operating region before release to production. This page synthesizes verified distributor information, official product references, available pricing signals, and engineering-oriented selection guidance without inventing unprovided electrical specifications.

Permintaan RFG Kontak
XMC4502F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4502F100F768ACXQMA1

XMC4502F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4502F100F768ACXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of flash memory and an Ethernet MAC in a PG-LQFP-100-11 package. It is designed for embedded industrial systems that combine deterministic real-time control with network connectivity. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces onto one device. The XMC4502 belongs to the XMC4000 family and extends the Arm Cortex-M4 architecture into industrial control. This product type provides higher processing performance than basic 8-bit or 16-bit controllers while retaining deterministic operation suited to motor control, industrial communications, and embedded automation. Key features include a 120 MHz Arm Cortex-M4 processor, 768 KB of flash, a 32-bit architecture, an Ethernet MAC, and support for a 3.3 V operating rail. The 100-pin PG-LQFP package provides access to the digital, analog, timing, communications, and debug resources required by complex control boards. Its industrial positioning makes it appropriate for equipment where predictable control performance and wired network connectivity are important. The Cortex-M4 processing core supports efficient execution of real-time control algorithms and communication firmware. A dedicated Ethernet MAC allows the microcontroller to participate directly in Ethernet-based industrial networks, reducing the need for a separate network controller in suitable designs. The 768 KB flash capacity provides substantially more program storage than entry-level Cortex-M devices, supporting larger application code, protocol stacks, and boot logic. Typical uses include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, industrial sensor gateways, and networked machine-control panels. The combination of 120 MHz processing and Ethernet MAC support allows designers to consolidate control and communications into one embedded platform while preserving a compact 100-pin surface-mount footprint. PCB implementation should follow the manufacturer package drawing for pad dimensions, exposed-pad requirements, and recommended land pattern. Decoupling, clock stability, analog grounding, and Ethernet signal routing require careful layout; use the manufacturer datasheet and hardware-design guidance when finalizing the board stack-up and component placement. This page combines the official product identity, distributor specification details, compatible same-family alternatives, application guidance, and practical engineering considerations to support component selection and board-level implementation.

Permintaan RFG Kontak
XMC4502F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4502F100K768ACXQMA1

XMC4502F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4502F100K768ACXQMA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of embedded flash and 160 KB of RAM, in a 100-pin PG-LQFP-11 package. It belongs to the XMC4000 family and combines an industrial microcontroller core with an Ethernet MAC, making it suitable for connected industrial control, automation, and communications equipment. The device also includes a hardware floating-point unit for higher-performance arithmetic. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The XMC4502F100K768ACXQMA1 belongs to the hierarchy of 32-bit MCU, Arm Cortex-M4 microcontroller, embedded processor, and semiconductor. Its 768 KB flash provides program storage for control software and protocol handlers, while 160 KB of RAM supports working memory, diagnostics, and network data buffers. Key features include a 120 MHz Arm Cortex-M4 core, 768 KB of flash, 160 KB of RAM, an FPU, and Ethernet MAC connectivity. The Ethernet MAC is significant for industrial Ethernet equipment because it allows network communication to be added to a control platform without relying on a discrete network interface. The XMC4000 family also provides configurable peripherals that can be adapted to different industrial application requirements. The controller combines a 32-bit Arm architecture with Infineon industrial peripherals and communication capabilities. Its 768 KB flash is twice the 384 KB often associated with smaller general-purpose Cortex-M4 designs, while the stated 160 KB RAM gives application code additional working space for buffering and real-time processing. At 120 MHz, the core provides the timing headroom expected for protocol handling, digital control loops, and supervisory functions in industrial equipment. Typical applications include industrial Ethernet controllers, factory automation equipment, motor and motion-control supervisory systems, networked sensors, building automation controllers, and industrial gateways. The Ethernet MAC and combination of flash, RAM, and real-time processing make the device appropriate for equipment that must execute control logic while exchanging data with supervisory systems. Designers should preserve the pin assignments and exposed-pad requirements of the PG-LQFP-11 footprint and use the manufacturer datasheet for the complete pin-description table, electrical limits, and decoupling recommendations. Firmware and peripheral assignments should also be checked against the device ordering information because suffix codes identify specific package, temperature, and qualification variants. This product page consolidates the confirmed controller specifications, package information, source links, engineering selection guidance, and clearly qualified replacement analysis. It focuses on practical distinctions among same-family Infineon ordering variants rather than presenting unverified cross-brand substitutions as drop-in choices.

Permintaan RFG Kontak
XMC4504-F100F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4504-F100F512ACXQMA1

XMC4504-F100F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4504-F100F512ACXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of embedded flash memory and Ethernet connectivity. The device is housed in a 100-pin PG-LQFP package designated PG-LQFP-100-11, making it appropriate for industrial control equipment that requires substantial embedded code storage, real-time processing capability, and integrated network communication. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The ARM Cortex-M4 core belongs to the Cortex-M product family and provides a 32-bit processing architecture suited to real-time embedded control. Within the broader system hierarchy, the XMC4504-F100F512ACXQMA1 is an industrial microcontroller, an embedded processing IC, and a member of Infineon's XMC4000 family. The principal device characteristics are a 120 MHz Cortex-M4 core and 512 KB of flash in a 100-pin LQFP package. Infineon describes the XMC4500 family as combining an industry-standard ARM Cortex-M4 core with a configurable peripheral set. That architecture allows the same device family to address industrial applications with different I/O, communications, and control requirements. The target device also includes Ethernet capability according to the manufacturer product listing. Compared with a small 8-bit or 16-bit control MCU, the Cortex-M4 architecture provides a wider processing model and substantially more program memory for networking stacks, supervisory logic, data processing, and complex state machines. The 120 MHz operating frequency gives designers additional instruction throughput for interrupt-driven control loops and protocol handling, while the 512 KB flash capacity reduces dependence on external program memory in space-constrained industrial designs. Typical uses include industrial Ethernet controllers, automated production equipment, building and factory automation systems, networked sensors, motor-control supervisory electronics, and embedded gateways. The PG-LQFP-100-11 package provides a high pin count suitable for devices requiring multiple I/O functions and communications peripherals, although its size and lead pitch must be considered during PCB layout and manufacturing planning. Designers should verify the complete pin assignment, peripheral availability, clock configuration, memory map, and electrical limits in the manufacturer datasheet before schematic capture. The LQFP footprint should be checked against the board geometry and assembly process, while decoupling and signal routing should follow the recommendations for the selected power and peripheral interfaces. This product page organizes the verified device identity, core performance, memory capacity, package details, Ethernet feature, suitable industrial applications, engineering guidance, and sourcing information into a compact engineering reference for schematic design, PCB planning, and BOM review.

Permintaan RFG Kontak
XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon
XMC4504-F100K512AB

XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F100K512AB is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 128 KB of SRAM, and an Ethernet MAC in an LQFP-100 package. It combines deterministic real-time control with industrial communications and is identified as a member of the XMC4000 family. What is an ARM Cortex-M4 microcontroller? An MCU is a semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The ARM Cortex-M4 core belongs to the microcontroller hierarchy, where the XMC4504-F100K512AB adds Infineon timing, communications, analog, and digital-control resources for embedded industrial systems. Its 512 KB flash supports firmware storage, while 128 KB SRAM provides working memory for control loops and communication tasks. The verified product information identifies a 120 MHz processor, 512 KB flash, 128 KB SRAM, Ethernet MAC, and LQFP-100 package. Search results also describe the device as part of Infineon’s XMC4000 family and identify associated peripherals including DMA, I2S, LED, POR, PWM, and watchdog functions. The available source data does not provide verified values for every electrical limit, pin function, peripheral characteristic, or package dimension, so those details remain marked as data needed. The target MPN is associated with Infineon ordering information that distinguishes it from the similarly named XMC4504-F100K512-AC. The verified search results identify XMC4504-F100K512-AC as an industrial ARM Cortex-M4 device with the same headline 120 MHz, 512 KB flash, and 128 KB SRAM characteristics, but the supplied data does not establish every pin-level difference. Direct substitution therefore requires comparison of the exact package drawing, pin names, electrical ratings, memory map, and qualification markings. Typical design roles include industrial automation, motor and motion control, networked embedded equipment, and real-time control systems where deterministic peripheral timing and Ethernet connectivity are useful. The Ethernet MAC makes the device relevant to connected industrial controllers, provided the design includes suitable PHY, magnetics, routing, and signal-integrity implementation. The LQFP-100 package requires careful PCB escape routing, decoupling, exposed thermal considerations where applicable, and verification of all 100 pins against the manufacturer package drawing. This page combines verified Infineon and distributor information with clearly identified missing-data boundaries rather than inferring undocumented specifications.

Permintaan RFG Kontak
XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon
XMC4504-F144F512AB

XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F144F512AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 512 KB of flash memory and a 144-pin PG-LQFP-24 package. It belongs to the XMC4000 family and is designed for industrial applications requiring deterministic real-time control, connected peripherals, and a broad set of analog and digital interfaces. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. In the hierarchy of electronic components, this MCU sits below embedded processor and below the broader category of semiconductors, while it is above general-purpose control logic in system-level terminology. The ARM Cortex-M4 core provides a 32-bit processing environment suitable for motor control, industrial automation, communications, and embedded measurement systems. The verified data identifies the XMC4504-F144F512AB as an XMC4000-series device with 120 MHz operation, 512 KB flash, an Ethernet MAC, 32-bit architecture, and a 144-pin LQFP package. The related Infineon XMC4504-F144K512-AC product page identifies the same 120 MHz, 512 kB, Ethernet MAC platform for industrial applications, providing useful family-level context while the exact orderable MPN remains the requested AB variant. The part is especially relevant when a design needs substantial embedded processing alongside Ethernet connectivity. The 120 MHz core can support protocol handling, supervisory control, signal processing, and real-time control tasks, while the 512 KB flash capacity provides a practical balance between firmware storage and system integration. The LQFP-144 package exposes a broad pin count for external peripherals and mixed-signal interfaces. Typical uses include industrial Ethernet equipment, factory automation controllers, building and infrastructure electronics, communication gateways, and embedded control platforms. Engineers should verify the exact peripheral assignments, electrical limits, pin multiplexing, startup configuration, memory map, and package details against the manufacturer documentation before layout or firmware deployment. The principal design consideration is package and software verification rather than headline performance. Confirm that the PCB land pattern matches the exact 144-pin LQFP variant, that all required power, clock, reset, debug, and communication signals are available, and that the selected toolchain supports the XMC4000 family. This page consolidates the verified source information, source links, application context, and engineering caveats without inventing unavailable electrical details.

Permintaan RFG Kontak
XMC4504F100K512ACXQMA1 - Cortex-M4 120MHz MCU | Infineon
XMC4504F100K512ACXQMA1

XMC4504F100K512ACXQMA1 - Cortex-M4 120MHz MCU | Infineon

Infineon Technologies XMC4504F100K512ACXQMA1 is an industrial 32-bit microcontroller built around an Arm Cortex-M4 processor core operating at 120 MHz. It provides 512 KB of flash memory, 128 KB of SRAM, and an Ethernet MAC in a 100-pin LQFP package with an exposed pad. The device is intended for embedded industrial systems requiring deterministic real-time control, Ethernet connectivity, and a substantial local memory configuration. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. Within the embedded-control hierarchy, the Cortex-M4 core belongs to the Arm Cortex-M family of 32-bit RISC processors. The XMC4000 family combines that core with industrial-oriented peripherals, flash, SRAM, communications interfaces, and clock-management resources, making the XMC4504 suitable for control systems that need both computation and network connectivity. The main architectural features are a 120 MHz operating frequency, 512 KB of flash, 128 KB of SRAM, and integrated Ethernet MAC functionality. Flash supports code storage and firmware updates, while SRAM provides working memory for protocol stacks, control state, diagnostics, and real-time tasks. The Ethernet MAC allows the controller to participate in a network without requiring a separate MAC block elsewhere in the system. Infineon identifies the device as part of its industrial XMC4000 microcontroller family. The XMC4504-F100F512-AC ordering designation identifies a 120 MHz Cortex-M4 industrial microcontroller with 512 KB of flash and 128 KB of SRAM. This part is supplied in a PG-LQFP-100 package with an exposed pad and is offered in tray packaging according to the product listing. The exposed thermal pad provides a direct heat-transfer path into the PCB, while the large 100-pin package exposes the device's broader pin and peripheral configuration. Typical applications include industrial Ethernet controllers, programmable automation equipment, connected sensor-hub systems, industrial gateways, motion-control equipment, and embedded data-acquisition platforms. In each case, the 512 KB flash capacity can hold application firmware and protocol components, while the 128 KB SRAM can support networking buffers and real-time control state. An external Ethernet PHY is still required for the physical network interface when the MCU supplies only the Ethernet MAC. PCB design should prioritize clean supply decoupling, a solid thermal-pad connection, and controlled routing of high-speed Ethernet signals. Place the input and bypass capacitors close to their associated supply pins, connect the exposed pad to the appropriate ground plane, and follow the package and layout guidance in the Infineon datasheet. Validate the complete clock, PHY, magnetics, and signal-integrity implementation before production release. This page consolidates the manufacturer specifications, memory and connectivity requirements, package characteristics, application guidance, and replacement considerations into a practical engineering reference. It also distinguishes confirmed ordering information from areas that require device-specific validation before schematic release or firmware deployment.

Permintaan RFG Kontak
XMC4504F144F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4504F144F512ABXQMA1

XMC4504F144F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4504F144F512ABXQMA1 is a 32-bit ARM Cortex-M4 XMC4000 series microcontroller with a maximum clock frequency of 120 MHz, 512 KB of flash memory, and a PG-LQFP-144-18 package. It is designed for embedded applications requiring real-time control, industrial connectivity, and deterministic peripheral integration. The device combines a 32-bit Cortex-M4 processor with 512 kB of program memory and an Ethernet MAC, making it suitable for industrial networking, automation equipment, communication controllers, and connected embedded systems. A microcontroller is a compact integrated circuit containing a processor core, program memory, data memory, peripherals, and communication interfaces. The XMC4000 family combines an ARM Cortex-M4 core with Infineon automotive and industrial embedded-control capabilities. This MCU is positioned for applications that need more processing performance and connectivity than a small 8-bit or 16-bit controller, while retaining a broad set of timers, serial interfaces, analog functions, and communication peripherals for system integration. The XMC4504F144F512ABXQMA1 operates at up to 120 MHz and includes 512 KB of flash memory. Its 32-bit architecture supports efficient control-loop execution, protocol handling, and signal-processing tasks. The Ethernet MAC provides a practical foundation for industrial Ethernet designs, while the extensive peripheral set can reduce the number of external components needed for sensor acquisition, actuator control, communications, and system monitoring. The PG-LQFP-144-18 package provides a high pin count for parallel I/O, analog functions, and multiple communication channels. Typical applications include industrial Ethernet equipment, factory automation controllers, building automation gateways, motor and power-control systems, communications infrastructure, and connected industrial sensors. The Cortex-M4 processing capability is useful for protocol stacks, state machines, data acquisition, and supervisory control. For designs requiring deterministic timing, the MCU can combine its high-frequency core with dedicated timer resources and event-driven peripherals instead of relying on a general-purpose host processor. Designers should verify the complete pin assignment, peripheral multiplexing, clock configuration, memory map, and electrical limits in the manufacturer datasheet before laying out the PCB. The LQFP package also requires attention to thermal dissipation, especially when the core and communication peripherals operate continuously. Power sequencing, decoupling, debug access, and Ethernet interface implementation should be planned early because these functions can materially affect board-level reliability and compliance. This product page summarizes the verified XMC4504F144F512ABXQMA1 identity and combines its principal MCU specifications with application guidance, comparison information, and practical design considerations. It is intended to help engineers identify the correct Infineon part, assess its 120 MHz Cortex-M4 and 512 KB flash configuration, and determine whether the XMC4504 platform is suitable for an industrial embedded-control design.

Permintaan RFG Kontak
XMC4504F144F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4504F144F512ACXQMA1

XMC4504F144F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504F144F512ACXQMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 512 KB of flash memory in a PG-LQFP-144-10 package. It combines an industrial microcontroller core with Ethernet connectivity and is identified as a 1.3 V or 3.3 V device for embedded control and connected industrial equipment. An XMC4000-series microcontroller combines an Arm Cortex-M4 processor with industrial-oriented peripherals in a single system-on-chip. The Cortex-M4 architecture supports efficient interrupt-driven control, while the XMC4000 family is designed for automation, communications, and embedded networking systems that need deterministic real-time behavior alongside an Ethernet interface. This device therefore belongs to the industrial microcontroller hierarchy rather than the general-purpose consumer MCU category. Principal characteristics include a 120 MHz CPU frequency, 512 KB of program flash, 32-bit processing, and an Ethernet MAC. The PG-LQFP-144-10 surface-mount package exposes 144 pins and is offered in a tray configuration. According to the Infineon product summary, the XMC4504-F144F512-AC industrial variant is designed around an operating voltage of 1.3 V to 3.63 V, making it suitable for low-voltage industrial boards designed around either 1.8 V or 3.3 V interfacing. The 512 KB flash allocation provides room for a substantial bootloader, network stack, field-service routines, and application firmware within a single device. Ethernet support allows the controller to participate directly in industrial Ethernet networks without an external interface controller. Exact RAM capacity, peripheral mix, temperature limits, and Ethernet physical-layer requirements should be confirmed in the manufacturer datasheet before the part is committed to a new board. Typical uses include industrial Ethernet gateways, programmable automation controllers, building automation equipment, motor and motion-control modules, and connected sensor-hub designs. Its 120 MHz processing headroom supports protocol handling alongside real-time control tasks, while the 144-pin LQFP package simplifies assembly for prototypes and moderate-production industrial boards compared with very fine-pitch BGA packages. For PCB design, follow the Infineon reference layout, power-supply decoupling, and exposed pad or thermal-via guidance in the manufacturer datasheet. Validate the Ethernet PHY or magnetics arrangement, maintain defined supply sequencing, and confirm that the selected 1.3 V or 3.3 V operating point matches the internal core and I/O requirements of the complete design. This page consolidates the verified manufacturer specifications, ordering information, package details, and practical engineering guidance for the XMC4504F144F512ACXQMA1. It also identifies a same-family ordering option and documents which parameters must still be confirmed against the manufacturer datasheet during hardware design review.

Permintaan RFG Kontak
XMC4504F144K512ACXQMA1 - 120MHz Cortex-M4 512KB MCU | Infineon
XMC4504F144K512ACXQMA1

XMC4504F144K512ACXQMA1 - 120MHz Cortex-M4 512KB MCU | Infineon

Infineon Technologies XMC4504F144K512ACXQMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 512 KB of embedded flash memory and an Ethernet MAC, housed in a PG-LQFP-144-18 package. The device combines a 120 MHz Arm Cortex-M4 processor core with configurable industrial peripherals for energy-efficient embedded control and communications designs. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. It belongs to the Arm Cortex-M family and provides integrated flash memory, SRAM, communication peripherals, timers, and interrupt-control hardware in one device. The XMC4504F144K512ACXQMA1 extends this architecture into the Infineon XMC4500 family for industrial applications that require real-time control and Ethernet connectivity. The principal device characteristics include a 120 MHz maximum clock, 512 KB of flash, 128 KB of SRAM, and a single processor core. Its 1.3 V and 3.3 V supply descriptions correspond to embedded core and I/O operating domains. The 144-lead PG-LQFP package provides ample I/O capacity for external memory interfaces, communications, analog inputs, timers, and industrial control signals while supporting surface-mount assembly. The XMC4500 architecture integrates Ethernet MAC functionality with a configurable peripheral set, allowing designers to tailor the controller to specific application requirements. Peripheral functionality and pin multiplexing should be configured together because the available pins and alternate functions depend on the selected operating mode. Firmware development uses the Arm Cortex-M4 programming model, with startup, linker, and device-support files required for the specific Infineon part and package. Typical applications include industrial Ethernet controllers, factory automation equipment, networked sensors, industrial gateways, motor-control systems, and embedded automation platforms. The combination of 120 MHz processing performance, 512 KB flash, and Ethernet MAC support makes the device appropriate for control nodes that must execute application firmware while communicating over an industrial Ethernet network. When assigning the package pins, consult the manufacturer pin-description table for the exact PG-LQFP-144-18 pinout. In particular, verify the functions of communication, debug, analog, reset, clock, and power pins before finalizing PCB routing. Proper decoupling, exposed-pad thermal design, and signal-integrity practices remain essential for reliable industrial operation. This page combines the manufacturer product identity, distributor specification details, same-family drop-in candidates, application guidance, and design-focused comparisons. These engineering references help engineers assess package reuse, peripheral compatibility, firmware prerequisites, and sourcing requirements before committing the XMC4504F144K512ACXQMA1 to an industrial embedded design.

Permintaan RFG Kontak
XMC4700E196K2048AAXQMA1 144MHz 2MB MCU | Infineon
XMC4700E196K2048AAXQMA1

XMC4700E196K2048AAXQMA1 144MHz 2MB MCU | Infineon

Infineon XMC4700E196K2048AAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at up to 144 MHz, with 2 MB of embedded Flash, 352 kB of SRAM, and Ethernet connectivity in a 196-pin PG-LFBGA-196-2 package. The device is designed for industrial control and communication systems requiring substantial processing performance, embedded memory, and a high pin count. A microcontroller is a programmable system-on-chip that combines a processor core, memory, peripherals, and communication interfaces. Within the embedded-control hierarchy, this XMC4700 belongs to the XMC4000 family of ARM Cortex-M4 microcontrollers, which sits between general-purpose embedded processors and highly integrated industrial controllers. The ARM Cortex-M4 core provides 32-bit processing suitable for deterministic control loops, communications management, and protocol handling. The XMC4700E196K2048AAXQMA1 provides 2048 kB of Flash for program storage and 352 kB of SRAM for working data. Its maximum operating frequency of 144 MHz supports computationally intensive industrial tasks, while the 196-pin package provides access to a broad peripheral and signal interface set. The product family supports Ethernet and CAN communication, making it applicable to connected automation equipment. EtherCAT slave support is identified for the XMC4700 family, providing a dedicated path for industrial Ethernet motion-control applications. The combination of EtherCAT capability, Ethernet, CAN, high-speed processing, and embedded memory distinguishes this device from general-purpose microcontrollers with narrower real-time communication requirements. Typical uses include industrial automation controllers, servo and motor-control platforms, networked industrial equipment, programmable logic controllers, and communications gateways. The 196-pin LFBGA package supports dense mixed-signal and digital designs but requires a carefully designed multilayer PCB, appropriate escape routing, and controlled assembly processing. Designers should follow the manufacturer’s package, pin-multiplexing, power, decoupling, and PCB-layout guidance in the XMC4700 documentation. Firmware must also account for the selected peripheral assignments, clock configuration, memory organization, and communication-stack requirements before the device is placed into production. This page consolidates the exact orderable MPN, principal memory and processor specifications, package details, communication capabilities, practical application guidance, and verified sourcing links. It also records the absence of a verified pin-by-pin assignment and qualifying drop-in alternatives rather than presenting unconfirmed substitution data as drop-in compatibility.

Permintaan RFG Kontak