Produk (46.000+)

XC7Z010-1CL225I - 667MHz Dual Cortex-A9 SoC | AMD
XC7Z010-1CL225I

XC7Z010-1CL225I - 667MHz Dual Cortex-A9 SoC | AMD

The AMD XC7Z010-1CL225I is a Zynq-7000 adaptive SoC combining a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 FPGA fabric in a 225-CSPBGA package. The device provides 28,000 logic cells, a stated operating frequency of 667 MHz, and an industrial temperature range of -40°C to +100°C. Its programmable logic and integrated processing system make it suitable for embedded control, industrial automation, communications, image processing, and compact edge systems. A Zynq-7000 SoC is a heterogeneous system-on-chip, combining an ARM microprocessor subsystem and programmable FPGA logic in one package. This integration reduces component count and allows software running on the Cortex-A9 processors to exchange data directly with hardware implemented in the FPGA fabric. The result is a flexible platform for systems that need deterministic parallel processing alongside a conventional embedded software environment. The XC7Z010-1CL225I provides two ARM Cortex-A9 cores, 28K FPGA logic cells, and a 667 MHz processor frequency. Its 225-CSPBGA package measures 13 mm by 13 mm according to distributor product data. The device operates from a nominal 1 V supply, with a stated minimum of 0.95 V and maximum of 1.05 V, and is identified as RoHS compliant. These characteristics position it as an entry-level Zynq device for designs requiring more parallelism than a conventional microcontroller provides. The architecture allows designers to partition a design between software and programmable logic. Software can manage operating-system tasks, control flow, and external interfaces, while the FPGA fabric can implement parallel data paths, custom interfaces, signal processing, or timing-critical functions. The available data identifies this device as a Zynq-7000 SoC with an Artix-7 FPGA fabric, but detailed block counts, memory interfaces, I/O counts, and power characteristics require confirmation from the AMD device documentation. Typical applications include industrial automation controllers, networked embedded gateways, motor and motion-control systems, communications equipment, sensor-processing platforms, and cost-sensitive FPGA-assisted processors. The dual Cortex-A9 configuration supports concurrent software workloads, while the FPGA fabric can accelerate operations that would otherwise burden the processor or require separate programmable logic. When designing a board around the XC7Z010-1CL225I, engineers must follow the AMD Zynq-7000 package pinout and power-sequencing guidance. The BGA footprint requires appropriate PCB layout, thermal analysis, and assembly process controls. Because the available distributor snippet provides limited electrical detail, final power budgeting, decoupling, DDR memory connectivity, and I/O standards must be verified against the official manufacturer documentation before release.

Permintaan RFG Kontak
XC7Z010-1CLG225C - Dual-Core Zynq-7000 SoC | AMD
XC7Z010-1CLG225C

XC7Z010-1CLG225C - Dual-Core Zynq-7000 SoC | AMD

AMD XC7Z010-1CLG225C is a Zynq-7000 Artix-7 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with 28K FPGA logic cells in a 225-CSPBGA package measuring 13 x 13 mm. The processor operates at 667 MHz, while the programmable logic provides flexible hardware acceleration alongside the embedded processing system. A Zynq-7000 system-on-chip belongs to the broader FPGA and SoC hierarchy: programmable logic operates alongside a hard processor subsystem rather than relying exclusively on soft processor cores. This integration enables software-controlled programmable hardware in a single package, reducing the need for separate processor and FPGA devices when the design requires both deterministic digital logic and an embedded operating system. The XC7Z010-1CLG225C combines two Cortex-A9 processor cores, 28K logic cells, and CoreSight debug support. Its key characteristics are the 667 MHz maximum listed processor frequency, 28K programmable logic-cell capacity, and 225-CSPBGA package. The commercial-temperature ordering suffix, CLG225 package designation, and 13 x 13 mm package geometry make it suitable for embedded systems that require compact integration and a manageable BGA footprint. The Zynq architecture separates the hard processing subsystem from the programmable logic array, allowing designers to allocate external interfaces, protocol handling, signal conditioning, or data acquisition functions to dedicated FPGA logic while software controls the system. This combination can reduce external interface overhead compared with a discrete processor-plus-FPGA architecture. Exact I/O counts, memory interfaces, power characteristics, and configuration details should be selected from the package-specific AMD documentation for the final design. Typical uses include industrial control gateways, embedded vision systems, communications equipment, data-acquisition platforms, and compact edge-processing products. The dual-core Cortex-A9 subsystem is suitable for concurrent software workloads, while the Artix-7 programmable logic can implement parallel datapaths or hardware protocol handling close to external sensors and converters. PCB implementation requires careful BGA layout, layer-stack planning, high-speed routing discipline, decoupling, and power-delivery verification. Use the AMD package pinout and board-design resources for ball assignments and escape routing, and validate the complete design for power integrity, signal integrity, thermal performance, and manufacturing yield before production. This page organizes the exact orderable-device identity, package information, technical search queries, same-footprint ordering alternatives, application guidance, and engineering design notes into one engineering reference. It complements the manufacturer documentation with practical implementation considerations for evaluating the XC7Z010-1CLG225C in embedded Zynq-7000 designs.

Permintaan RFG Kontak
XC7Z010-1CLG225I - Zynq-7000 SoC, 667MHz, 28K Logic Cells | AMD
XC7Z010-1CLG225I

XC7Z010-1CLG225I - Zynq-7000 SoC, 667MHz, 28K Logic Cells | AMD

The AMD XC7Z010-1CLG225I is a Zynq-7000 SoC integrating a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 FPGA fabric in a 225-ball CSPBGA (13x13 mm) package. It operates at a maximum processor frequency of 667 MHz and provides 28K logic cells, making it a versatile platform for embedded systems requiring both software programmability and hardware acceleration. A System-on-Chip (SoC) combines a processor (CPU) with other system components such as memory controllers, peripherals, and programmable logic on a single die. The Zynq-7000 family specifically merges a hard ARM processing system (PS) with a programmable FPGA fabric (PL), enabling designers to implement custom hardware accelerators alongside software applications. This architecture bridges the gap between traditional microcontrollers and FPGAs, offering the flexibility of programmable logic with the ease of software development. Key features include dual ARM Cortex-A9 cores with NEON and CoreSight debug, 28K Artix-7 logic cells, 667 MHz maximum frequency, and industrial temperature range (-40°C to +100°C). The device supports a nominal supply voltage of 1.0V (0.95V to 1.05V) and includes integrated memory controllers, DMA, and a rich set of peripherals. The CLG225 package provides a compact footprint suitable for space-constrained designs. The Zynq-7000 architecture separates the PS and PL, allowing independent clocking and power management. The PS includes a DDR3/DDR3L memory controller, Gigabit Ethernet, USB 2.0, and SDIO interfaces, while the PL provides configurable logic, DSP slices, and block RAM. This separation enables optimized performance and power efficiency for heterogeneous workloads. Typical applications include industrial motor control, software-defined radio, medical imaging, and automotive driver assistance systems. The combination of ARM processing and FPGA fabric makes it ideal for real-time control, signal processing, and protocol bridging. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, careful attention must be paid to power supply sequencing and decoupling. The multiple power rails (VCCINT, VCCAUX, VCCO) require proper filtering and sequencing to ensure reliable startup and operation. Refer to the Zynq-7000 TRM (UG585) for detailed power-up requirements.

Permintaan RFG Kontak
XC7Z010-1CLG400C - 667MHz Zynq SoC, 28K Logic | AMD
XC7Z010-1CLG400C

XC7Z010-1CLG400C - 667MHz Zynq SoC, 28K Logic | AMD

The AMD XC7Z010-1CLG400C is a Zynq-7000 All Programmable System on Chip integrating a dual-core Arm Cortex-A9 processor, 667 MHz processor operation, and 28,000 FPGA logic cells in a 400-CSBGA package measuring 17 mm by 17 mm. It combines programmable hardware with software-controlled processing for embedded systems, industrial control, communications, image processing, and hardware-accelerated applications. The device also provides 35,200 registers, 240 Kbit of block RAM, 80 multipliers, 60 block RAM resources, 80 dedicated DSP slices, and up to 128 user I/Os, according to the supplied technical data. What is a Zynq-7000 All Programmable SoC? A system on chip, or SoC, combines multiple functional subsystems into one integrated semiconductor. In this case, the XC7Z010-1CLG400C integrates an Arm Cortex-A9 MPCore processing system with CoreSight debug support and Artix-7 FPGA logic. This hierarchical relationship places the device between a conventional microprocessor and a programmable-logic accelerator, allowing software tasks and parallel hardware pipelines to share one package. The principal features are the dual Arm Cortex-A9 cores, 667 MHz operation, and 28K programmable logic cells. The supplied data also identifies 240 Kbit of RAM, 80 multipliers, 60 block RAMs, 80 dedicated DSP slices, two Ethernet MACs, and support for differential I/O standards including LVDS, SSTL, and HSTL. These resources make the device suitable for systems that need deterministic hardware pipelines alongside general-purpose software. The FPGA fabric provides programmable parallel logic for acquisition, filtering, protocol conversion, video processing, and cryptographic workloads. The processor subsystem supports software applications and operating-system-based control, while the DSP, block RAM, and Ethernet resources can accelerate data-intensive operations without requiring separate programmable-logic devices. The 400-CSBGA package exposes up to 128 user I/Os for board-level connectivity. Typical uses include industrial factory controllers, networked embedded gateways, camera and image-processing systems, communications equipment, data-acquisition platforms, and compact control systems. The integrated architecture can reduce the number of external chips when software control and FPGA acceleration are both required. The 667 MHz processor and parallel fabric provide a flexible split between sequential software processing and hardware pipelines. Designers should verify power sequencing, signal-integrity requirements, differential I/O implementation, thermal conditions, and the complete pinout against the AMD documentation. The supplied data does not provide a manufacturer datasheet URL, exact voltage limits, operating-temperature range, or detailed package dimensions, so those values are not inferred here. This product data consolidates verified distributor and comparison information with practical selection context, package identity, core architecture, programmable resources, and application guidance for engineers evaluating the XC7Z010-1CLG400C.

Permintaan RFG Kontak
XC7Z010-2CLG400E - Dual-Core Zynq SoC, 766MHz | AMD
XC7Z010-2CLG400E

XC7Z010-2CLG400E - Dual-Core Zynq SoC, 766MHz | AMD

AMD XC7Z010-2CLG400E is a Zynq-7000 system-on-chip integrating a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug capability and 28,000 Artix-7 FPGA logic cells. The processor operates at 766 MHz, and the device is packaged in a 400-CSPBGA package measuring 17 x 17 mm. It provides a compact platform for combining Linux-based software control with hardware-accelerated programmable logic. A Zynq system-on-chip belongs to the FPGA & CPLD category and integrates a hard processor system with programmable logic. Unlike a separate microcontroller and FPGA, this architecture allows software and hardware functions to exchange data through dedicated interfaces without requiring an external processor-to-FPGA bus. The XC7Z010 also includes 130 I/O, making it appropriate for embedded control, data acquisition, communications, and industrial equipment requiring both firmware execution and hardware timing. The key features of the XC7Z010-2CLG400E are its 766 MHz dual-core ARM Cortex-A9 processor, 28,000 programmable logic cells, CoreSight debug support, and integration in the 400-CSPBGA package. The processor operates from 1.2 V and 3.3 V according to the component listing, while the snippet identifies the device as a Zynq-7000 SoC with Artix-7 FPGA resources. These characteristics support deterministic hardware functions operating alongside a conventional embedded-software stack. The device architecture combines an ARM MPCore processing subsystem with Artix-7 programmable logic. Firmware can control processors, peripherals, memory, and external interfaces, while programmable logic can implement parallel data paths, protocol handling, filters, or accelerator functions. The integrated SoC arrangement reduces component count and board complexity, but the system still requires careful partitioning between hard-processor peripherals and fabric logic to avoid inefficient arbitration or timing bottlenecks. Typical applications include industrial control gateways, camera and image-processing modules, networked embedded systems, sensor acquisition equipment, and communications infrastructure. A camera module can place pixel formatting or interface logic in the FPGA fabric while the ARM cores manage control protocols. An industrial gateway can run operating-system software while programmable logic accelerates packet handling or deterministic data acquisition. The 400-CSPBGA package requires careful PCB layout, power-plane planning, via assignment, and thermal design. Use the AMD package pinout files and UG865 when assigning every ball, and follow the Zynq-7000 power, decoupling, and configuration requirements in the manufacturer documentation. Differential pairs and high-speed memory or interface routes need controlled length, return paths, and reference-plane continuity. This product page combines the device identity, package information, family alternatives, application guidance, comparison parameters, and practical design considerations into one engineering reference for evaluating the XC7Z010-2CLG400E.

Permintaan RFG Kontak
XC7Z010-2CLG400I Dual Cortex-A9 Zynq SoC | AMD
XC7Z010-2CLG400I

XC7Z010-2CLG400I Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z010-2CLG400I is a Zynq-7000 adaptive system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 FPGA fabric in a 400-CSPBGA package measuring 17 x 17 mm. The device provides 28K FPGA logic cells, operates with a listed processor frequency of 766 MHz, and integrates CoreSight debug support. Its combination of hard processor, programmable logic, and high-speed serial connectivity makes it suited to embedded control, industrial automation, communications, image processing, and edge systems. A Zynq SoC is an FPGA & CPLD with an embedded ARM processing system. The programmable-logic section implements custom hardware, parallel interfaces, accelerators, or signal-processing pipelines, while the ARM Cortex-A9 subsystem executes operating-system code and controls those functions. In the broader semiconductor hierarchy, the XC7Z010 belongs to the FPGA & CPLD category and extends the functionality of a conventional FPGA through heterogeneous processing integration. The primary advertised features include a dual ARM Cortex-A9 MPCore processor, CoreSight technology, 28K logic cells, a 766 MHz operating frequency, and a compact 400-CSPBGA package. The industrial-temperature suffix identifies this ordering option for applications requiring an extended operating-temperature grade. Its 17 x 17 mm ball-grid-array package also supports dense PCB integration while exposing the processor, programmable logic, memory interfaces, and I/O resources in one device. Technically, the processor and FPGA fabric are functionally coupled but not automatically accelerated by hardware. A design can partition tasks between software running on the ARM subsystem and parallel logic implemented in the Artix-7 fabric, then use shared memory or high-speed interfaces for data exchange. Designers must plan clocking, memory, power, and signal-integrity constraints before implementation. The FPGA part also requires equivalent-device-aware Vivado configuration and suitable design constraints for the selected speed and temperature grade. Typical applications include industrial controllers, programmable logic automation, embedded vision, sensor fusion, network appliances, and low-latency edge processing. For vision, the programmable fabric can accelerate deterministic image-processing stages while the processor handles control logic and external networking. For industrial equipment, hardware peripherals can be placed close to the processing engine to reduce serial-interface overhead. The same integration also supports programmable radio, test, and measurement modules when several interfaces must share a common board area. The principal design consideration is package complexity. A 400-CSPBGA assembly requires a fine-pitch, multilayer PCB, careful escape routing, controlled-impedance interfaces, and assembly processes capable of handling the full ball array. Power and thermal design should be completed early because processor activity, FPGA utilization, DDR memory, and high-speed I/O can make board-level performance dependent on more than nominal device speed. This page organizes the device's core electrical identity, package details, ordering alternatives, application guidance, migration considerations, and PCB implementation notes into one engineering-focused reference. It also distinguishes true package-compatible ordering alternatives from larger Zynq devices that require additional design review rather than treating them as unconditional drop-in replacements.

Permintaan RFG Kontak
XC7Z010-3CLG225E - 866MHz Dual Cortex-A9 SoC | AMD
XC7Z010-3CLG225E

XC7Z010-3CLG225E - 866MHz Dual Cortex-A9 SoC | AMD

AMD XC7Z010-3CLG225E is a Zynq-7000 programmable system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with 28K Artix-7 FPGA logic cells, an 866 MHz processor rating, and CoreSight debug support in a 225-CSPBGA package measuring 13 x 13 mm. It integrates programmable logic, hard processors, memory controllers, and programmable I/O in one device. A Zynq-7000 SoC is a heterogeneous programmable-logic device combining an FPGA fabric with one or more Arm processor cores. In the product hierarchy, XC7Z010-3CLG225E is a Zynq-7000 system-on-chip, an FPGA & CPLD integrated circuit, and a semiconductor platform suitable for embedded control, industrial automation, communications, image processing, and general-purpose edge systems. The device provides 28,000 logic cells and a dual-core Arm Cortex-A9 configuration at up to 866 MHz. Its 225-CSPBGA package supports a compact board layout, while the -3 speed grade targets higher operating performance than the lower-speed Zynq-7000 options. The CLG225 device also provides four external ADC signal pairs, as described in AMD documentation for the 7z010 CLG225 family. AMD DS187 covers XC7Z010 and its related Zynq-7000 devices, including DC and AC switching characteristics. The listed 28 nm fabrication technology and 1 V core-side operating designation identify the device as a programmable logic and embedded-processing platform rather than a conventional standalone microprocessor. Its architecture allows software running on the Arm cores to control FPGA fabric for parallel datapaths, hardware acceleration, interface adaptation, and deterministic real-time processing. Typical applications include industrial control gateways, networked embedded systems, video and image-processing subsystems, communications equipment, test and measurement platforms, and programmable sensor nodes. The dual-core processor supports concurrent software workloads, while the FPGA fabric can accelerate data movement or implement custom peripherals without adding a separate FPGA to the board. PCB design must follow the AMD Zynq-7000 CLG225 package and pinout documentation, including ball assignments, power rails, decoupling, clocking, and high-speed routing requirements. Designers should also account for programming, boot configuration, thermal performance, and the relationship between the 866 MHz processor rating and the power required by the selected power-management design. This product record combines the device architecture, package details, practical application guidance, and speed-grade comparison in one place. It helps engineers distinguish the -3 CLG225 device from lower-speed variants and evaluate whether the integrated processor-FPGA architecture fits a specific embedded design before beginning schematic capture and PCB layout.

Permintaan RFG Kontak
XC7Z010-3CLG400E - 866MHz Zynq SoC with 28K Logic Cells
XC7Z010-3CLG400E

XC7Z010-3CLG400E - 866MHz Zynq SoC with 28K Logic Cells

The AMD XC7Z010-3CLG400E is a Zynq-7000 Artix-7 system-on-chip that combines a dual-core Arm Cortex-A9 MPCore processing system with 28K programmable logic cells. The device operates at up to 866 MHz and is supplied in a 400-CSPBGA package measuring 17 mm by 17 mm. Its integrated architecture allows control software, ARM Cortex-A9 processing, programmable logic, and dedicated I/O resources to operate within one device. A Zynq system-on-chip is an FPGA and processor integration. The processor subsystem handles operating-system software, networking, control functions, and general-purpose applications, while the programmable-logic subsystem implements custom hardware, accelerators, interfaces, and real-time datapaths. The XC7Z010 belongs to the Zynq-7000 hierarchy, combining an Arm Cortex-A9 microprocessor system with Artix-7 programmable logic and CoreSight debug capabilities in one semiconductor package. The XC7Z010-3CLG400E provides 28K logic cells, an 866 MHz maximum processor frequency, and a 400-CSPBGA package. Its integrated design reduces the number of discrete components needed for a processor-plus-FPGA system and permits direct communication between the processing system and programmable logic. This architecture is particularly useful when software must coordinate hardware, when deterministic logic must coexist with a general-purpose processor, or when product updates need both programmable software and configurable hardware. The -3 ordering code identifies the device speed grade, while CLG400 identifies the 400-ball chip-scale BGA package and E identifies the commercial temperature option. Because the package integrates hundreds of power, ground, signal, and configuration connections, the PCB must follow the AMD package guidelines, including controlled BGA pad geometry, appropriate escape routing, and properly designed power and ground planes. Typical implementations include industrial control gateways, camera and vision systems, programmable-logic test equipment, embedded Linux products, industrial Ethernet equipment, and low-latency signal-processing platforms. In these systems, the Arm Cortex-A9 processors can run control software while programmable logic handles deterministic acquisition, protocol conversion, filtering, or interface tasks. For a new design, follow the AMD Zynq-7000 data sheet, package pinout files, PCB design guidance, and Vivado implementation rules. Pay particular attention to supply rails, decoupling, BGA assembly, clocking, configuration boot sources, and memory-interface layout. Existing boards must also be reviewed for speed-grade, temperature-grade, timing, and software qualification changes before substitution. This product page consolidates the Zynq-7000 SoC specifications, package information, same-footprint alternatives, application guidance, and design considerations into one engineering-oriented reference for FPGA, embedded, and hardware-design teams.

Permintaan RFG Kontak
XC7Z010-L1CLG225I - Low-Power Zynq-7000 SoC | AMD
XC7Z010-L1CLG225I

XC7Z010-L1CLG225I - Low-Power Zynq-7000 SoC | AMD

The AMD XC7Z010-L1CLG225I is a low-power Zynq-7000 system-on-chip with 28K Artix-7 FPGA logic cells, a dual-core ARM Cortex-A9 MPCore processor operating at 667 MHz, and CoreSight debug support in a 225-CSPBGA package measuring 13 x 13 mm. The integrated programmable logic and application processor allow control, communications, and signal processing to share one device. A Zynq SoC is an FPGA-based system-on-chip architecture that combines an ARM Cortex-A9 application processing unit with Artix-7 programmable logic. This device therefore belongs to both the embedded microprocessor and FPGA & CPLD product categories, while its high integration reduces the need for separate processors and programmable-logic devices. The L1 ordering code identifies the low-power version of the XC7Z010 device family. The principal features include 28K logic cells, a dual-core 32-bit ARM Cortex-A9 processor, a 667 MHz maximum operating frequency, and 225-CSPBGA packaging. The device operates from 1.2 V and 3.3 V rails according to its published ordering information. Its combined architecture is useful when an application requires Linux-capable processing, real-time control, programmable interfaces, or dedicated hardware-assisted data paths. The XC7Z010-L1CLG225I belongs to the XC7Z010 Zynq-7000 family, whose hardware documentation also identifies CLG225 package variants with four external ADC signal pairs. The FPGA fabric can implement parallel interfaces, protocol handling, data acquisition, and custom accelerators, while the application processor manages control software, networking, and higher-level tasks. This division of labor allows latency-sensitive operations to remain in programmable logic. Typical uses include industrial control gateways, embedded Linux systems, data-acquisition equipment, machine vision, communication concentrators, and sensor-processing platforms. In these systems, the processor can run the operating system and supervisory logic while the programmable fabric executes deterministic acquisition, filtering, packet processing, or peripheral bridging. The same integration can reduce board area and simplify the interface between software and hardware logic. Designers should evaluate power sequencing, decoupling, clocking, DDR memory connectivity, and the BGA escape-routing strategy before layout. Because the processor and programmable logic share power, thermal, and package constraints, the implementation should follow the AMD Zynq-7000 packaging, pinout, and PCB design guidance. A board-level design also needs a reproducible boot or programming path and must preserve the device-specific configuration required by the selected Linux image or bitstream. This product page combines the manufacturer device description with application-oriented engineering guidance, same-family drop-in options, and a practical comparison of speed-grade and temperature-grade ordering codes. It is intended to accelerate device selection while preserving the migration checks required for an industrial-temperature Zynq-7000 design.

Permintaan RFG Kontak
XC7Z010-L1CLG400I - Dual-Core ARM Cortex-A9 SoC | AMD
XC7Z010-L1CLG400I

XC7Z010-L1CLG400I - Dual-Core ARM Cortex-A9 SoC | AMD

The AMD XC7Z010-L1CLG400I is a programmable Zynq-7000 system on chip integrating a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, 28K logic cells, and a 667 MHz processor operating frequency in a 400-CSPBGA package measuring 17 mm by 17 mm. CoreSight debug support and programmable-system-on-chip architecture place it within the FPGA and SoC integration category. A system on chip, or SoC, combines a hard processor subsystem with programmable logic and shared interfaces on one device. In the Zynq-7000 hierarchy, the ARM Cortex-A9 subsystem executes operating-system and application software, while the Artix-7 FPGA fabric implements parallel hardware, custom peripherals, signal processing, or real-time control functions. This integration reduces the number of discrete devices and allows software-controlled hardware accelerators to exchange data with the processor system. The XC7Z010-L1CLG400I provides 28K FPGA logic cells and 667 MHz ARM processing in one package. The dual-core Cortex-A9 configuration supports parallel operating-system workloads, while CoreSight provides integrated debug visibility. A 256 KB RAM block is associated with the device in the Zynq-7000 product family. The 400-CSPBGA package offers a high pin count suitable for exposing processor, FPGA, memory, and high-speed I/O resources. The device combines a hard ARM Cortex-A9 processing subsystem with an Artix-7 FPGA fabric rather than implementing the processor entirely in programmable logic. This architecture allows deterministic hardware blocks to run concurrently with software workloads. High-speed memory-mapped interfaces connect the processor to FPGA fabric, enabling functions such as hardware-assisted filtering, protocol handling, data acquisition, and control when supported by the selected design tools and device configuration. Typical uses include industrial control, machine vision, communications infrastructure, test and measurement, embedded networking, and sensor-processing systems. The ARM processor can manage operating-system tasks and device control, while the FPGA fabric accelerates parallel logic. In a camera-based inspection system, for example, programmable logic can acquire and pre-process image data while the processor performs higher-level analysis and communications. PCB design requires careful attention to the 400-ball package, multilayer-routing rules, power integrity, and high-speed differential signals. Use the manufacturer package pinout files and the applicable Zynq-7000 design guidance when assigning balls and planning power, ground, clock, and I/O connections. Configuration, programming interfaces, decoupling, and board-level test access should be validated in the Vivado design flow before fabrication. This page combines the device architecture, package information, drop-in candidates, application guidance, and practical design considerations. The comparison tables and migration notes are intended to shorten engineering evaluation while preserving the need for package, timing, resource, and temperature-grade verification before any replacement is approved.

Permintaan RFG Kontak
XC7Z012S-1CLG485C - 667MHz Cortex-A9 SoC FPGA | AMD
XC7Z012S-1CLG485C

XC7Z012S-1CLG485C - 667MHz Cortex-A9 SoC FPGA | AMD

The AMD XC7Z012S-1CLG485C is a Zynq-7000S programmable system-on-chip combining one Arm Cortex-A9 MPCore processor at 667 MHz with 55K logic cells of Artix-7 FPGA fabric in a 485-CSPBGA package measuring 19 mm by 19 mm. It also provides 150 I/O, a 1.0 V processor core supply, and a commercial temperature range from 0 °C to +85 °C. The device combines hardware programmable logic with a coherent processor system, making it suitable for embedded control, industrial automation, connected equipment, and compact machine-vision designs. A Zynq-7000S SoC is a programmable SoC and FPGA hybrid. Unlike a microcontroller built around fixed peripherals, it combines an Arm processor subsystem with programmable logic, high-speed I/O, memory interfaces, and dedicated processing blocks. This places the device within the hierarchy of embedded processors, programmable logic, FPGA devices, and semiconductor system-on-chips. The integrated architecture allows software running on the Cortex-A9 processor to exchange data directly with hardware implemented in the FPGA fabric. Key features include a single Cortex-A9 MPCore processor, CoreSight debug support, 667 MHz operating frequency, and 55K programmable logic cells. The programmable fabric supports parallel data acquisition, protocol handling, image preprocessing, and custom acceleration without requiring a separate FPGA. A 1.0 V core and 150 user I/O provide the principal power and external connectivity resources, while the 485-CSPBGA package supports compact, high-density PCB layouts. The Zynq-7000S architecture separates the embedded-processing role from the programmable-logic role while providing a shared hardware environment. The Cortex-A9 side can run operating systems or embedded software, while the FPGA side can implement deterministic interfaces and data pipelines. CoreSight enables visibility into processor execution for design validation. The 667 MHz processor class and moderate 55K-cell fabric are balanced for cost-sensitive systems where modest logic capacity is sufficient. Typical applications include industrial sensor gateways, factory automation controllers, embedded vision preprocessors, low-cost network appliances, and programmable sensor interfaces. In a camera or high-speed sensor design, the FPGA fabric can receive parallel data and perform filtering while the processor manages configuration and control. In automation equipment, the Cortex-A9 can execute supervisory logic while the fabric handles timing-critical I/O. PCB design must account for the high pin count, demanding power delivery, and numerous configuration and dedicated I/O connections. Follow the AMD package placement diagram and device pinout files when assigning balls and routing power, ground, clock, configuration, and high-speed interface signals. Confirm the complete pin-description table, power sequencing, decoupling, and differential-signal constraints in the manufacturer datasheet before fabrication. This page combines the verified Zynq-7000S device specifications with package-aware replacement guidance, parameter comparisons, and practical implementation considerations. It also identifies which ordering variants retain the 485-CSPBGA footprint and where speed or temperature-grade differences require engineering review before substitution.

Permintaan RFG Kontak
XC7Z012S-1CLG485I - 667MHz Zynq SoC | AMD
XC7Z012S-1CLG485I

XC7Z012S-1CLG485I - 667MHz Zynq SoC | AMD

The AMD XC7Z012S-1CLG485I is a Zynq-7000S system-on-chip combining a single 667 MHz Arm Cortex-A9 processor with 55,000 Artix-7 FPGA logic cells in a 485-CSPBGA package measuring 19 mm by 19 mm. The integrated processor and programmable logic provide a flexible platform for embedded control, hardware acceleration, and Linux-capable applications without requiring separate devices on the board. A system-on-chip is an integrated semiconductor that combines a processing system and programmable logic in one package. Within the Zynq-7000 hierarchy, the device belongs to the Zynq-7000S family and combines the Arm Cortex-A9 processor with Artix-7 FPGA fabric. This integration can simplify data movement between software-controlled processing and parallel hardware logic while reducing board-level component count and interconnect complexity. The principal device characteristics include one Arm Cortex-A9 processor core operating at 667 MHz, 55,000 FPGA logic cells, and CoreSight debug support. The CLG485 designation identifies a 485-ball chip-scale BGA package. Compared with the related XC7Z012S-2CLG485I, the -1 speed grade operates at 667 MHz rather than 766 MHz, making it appropriate where the lower speed grade meets system timing and power requirements. The device architecture divides work between the processor and programmable logic. The processor executes operating-system software, control code, and network-facing applications, while the FPGA fabric implements parallel data paths, custom peripherals, protocol engines, and time-critical processing. Pin multiplexing and device configuration are established through AMD programming tools and the associated Zynq-7000 design documentation. Typical uses include industrial control gateways, machine-vision systems, embedded network appliances, test and measurement instruments, and data-acquisition platforms. The processor is suited to supervisory software and control functions, while the Artix-7 logic can accelerate parallel algorithms or implement hardware interfaces that would otherwise burden the processor. PCB implementation requires careful attention to the dense BGA escape routing, power delivery, decoupling, and signal-integrity requirements. The board must follow the AMD package placement, pinout, and high-density design guidance, including differential-pair geometry, reference-plane continuity, and thermal management around the device. Firmware, HDL, and constraint files must be validated for the exact device speed and package variant. This page combines the device architecture, verified ordering information, package-aware alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC7Z012S-1CLG485I as the processing and programmable-logic centerpiece of an embedded system.

Permintaan RFG Kontak
XC7Z012S-2CLG485E - 55K Logic Cell Zynq SoC | AMD
XC7Z012S-2CLG485E

XC7Z012S-2CLG485E - 55K Logic Cell Zynq SoC | AMD

The AMD XC7Z012S-2CLG485E is a programmable system-on-chip combining a single Arm Cortex-A9 MPCore processor with CoreSight debug technology and an Artix-7 FPGA fabric. It provides 55K logic cells, a processor operating frequency of 766 MHz, and a 485-CSPBGA package measuring 19 mm by 19 mm. A Zynq-7000 SoC is a heterogeneous embedded-processing device that unifies a microprocessor system and programmable logic in one silicon package. The ARM Cortex-A9 processor executes operating-system and application software, while the FPGA fabric implements parallel data processing, custom interfaces, or hardware accelerators. This integration can reduce component count and avoid transferring large amounts of data across a separate processor-to-FPGA interface. Key features of the XC7Z012S-2CLG485E include its single-core Cortex-A9 configuration, 766 MHz operating frequency, and 55K programmable logic cells. The integrated SoC also includes a temperature sensor, watchdog timeout detection, and AES encryption support. These functions make the device applicable to industrial control, communications, embedded vision, and data-acquisition systems requiring both sequential software execution and parallel hardware logic. The -2 device designation identifies the speed grade, while CLG485 identifies the 485-ball chip-scale BGA package and E identifies the extended-temperature product variant. The verified product information specifies an operating temperature range of 0 °C to 100 °C for the junction. The SoC architecture combines software programmability with hardware programmability, allowing control functions, data pipelines, protocol handling, and accelerator logic to coexist in one device. Typical applications include industrial automation controllers, networked sensor gateways, camera and image-processing systems, test-and-measurement instruments, and embedded control platforms. The processor can manage communications, configuration, and supervisory functions, while parallel FPGA logic handles deterministic sampling, filtering, protocol conversion, or data acquisition at rates that would otherwise require additional logic devices. PCB implementation requires careful BGA layout, power-delivery design, thermal management, and signal-integrity control. Place the device according to the AMD package placement diagram, connect all required power and ground balls, and route high-speed interfaces with controlled impedance. The 19 mm by 19 mm CSPBGA package also requires a land pattern, mask, and assembly process capable of supporting its ball pitch and ball count. This page combines the exact manufacturer and distributor attributes, a same-footprint industrial-temperature alternative, a lower-speed same-family option, package references, and practical implementation guidance. It helps engineers identify whether the XC7Z012S-2CLG485E matches a design requiring a 766 MHz single-core Arm processor, 55K logic cells, and a 485-ball BGA footprint.

Permintaan RFG Kontak
XC7Z012S-2CLG485I - 766MHz Zynq SoC | AMD
XC7Z012S-2CLG485I

XC7Z012S-2CLG485I - 766MHz Zynq SoC | AMD

AMD XC7Z012S-2CLG485I is a single-core Zynq-7000S system-on-chip combining a 766 MHz Arm Cortex-A9 processor with 55K Artix-7 FPGA logic cells in a 485-CSPBGA package measuring 19 mm by 19 mm. The integrated processor, programmable logic, memory controllers, and programmable I/O provide a compact heterogeneous computing platform for industrial control, machine vision, communications, and embedded edge systems. A Zynq-7000S SoC is a programmable system-on-chip that merges a hard processor subsystem with FPGA fabric in one device. The Cortex-A9 core executes operating-system-level software, control logic, and network protocols, while the Artix-7 fabric accelerates parallel algorithms and interfaces directly to external peripherals. This system-on-chip hierarchy combines an Arm Cortex-A9 processor, an FPGA, a programmable SoC, and a semiconductor into a single highly integrated architecture. The device provides 55K logic cells, a 766 MHz processor operating point, and 130 I/O according to the AMD device documentation and product listings. The CLG485 package contains 485 balls in a 19 mm by 19 mm CSPBGA configuration. Its integrated SoC architecture reduces the number of discrete devices needed when a design requires both deterministic programmable logic and a conventional processor runtime. The single Cortex-A9 core provides the software-processing side of the architecture, while the FPGA fabric supports parallel datapaths, protocol termination, custom accelerators, and time-critical I/O. CoreSight debug capabilities make the processor and programmable logic easier to bring up under a unified development flow. Exact memory-interface, transceiver, and configuration details should be selected from the complete AMD Zynq-7000 datasheet before schematic and PCB signoff. Typical uses include industrial IoT gateways, motor-control systems, embedded vision, industrial networking, test equipment, and low-power edge processors. In an embedded-vision controller, the processor can manage image transport and control software while FPGA fabric handles pixel pipelines or sensor interfaces. In communications equipment, programmable logic can implement custom packet handling while the processor runs network services and supervisory code. PCB design must account for the CSPBGA footprint, ball assignment, power rails, decoupling, configuration storage, and high-speed routing requirements. Follow the AMD package placement, pinout, and design-guideline documents exactly; validate differential pairs and length matching in the target stack-up. Commercial availability and lead time should be confirmed through the Request a Quote form on this page. This product summary combines the verified AMD and distributor device identification with practical guidance on FPGA/SoC partitioning, package constraints, and design qualification. It is intended to accelerate component selection while keeping critical PCB and electrical decisions tied to AMD's authoritative package and datasheet documentation.

Permintaan RFG Kontak
XC7Z014S-1CLG400C - 667MHz 65K Logic Cell Zynq SoC | AMD
XC7Z014S-1CLG400C

XC7Z014S-1CLG400C - 667MHz 65K Logic Cell Zynq SoC | AMD

The AMD XC7Z014S-1CLG400C is a Zynq-7000 Artix-7 system-on-chip combining a single ARM Cortex-A9 MPCore processor with CoreSight, 65K logic cells, and FPGA fabric in a 400-ball CSPBGA package measuring 17 x 17 mm. It operates at 667 MHz and integrates programmable hardware acceleration with ARM-based software processing on one device. A Zynq system-on-chip is an adaptive SoC that bridges the ARM Cortex-A9 embedded-processing hierarchy and the programmable-logic hierarchy of an FPGA. The processor system runs operating-system and control software, while the Artix-7 fabric implements parallel data paths, hardware accelerators, interfaces, and real-time signal processing. This combination can reduce component count and data-transfer overhead in connected embedded systems. The principal device resources include 65K logic cells, a 667 MHz single-core ARM Cortex-A9 MPCore configuration, and CoreSight debug capability. The 400-CSPBGA package provides a compact 17 x 17 mm surface-mount solution for advanced embedded platforms. Connectivity described for the Zynq-7000 family includes CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and EBI/EMI interfaces. The -1 speed designation identifies the -1 performance grade, while CLG400 denotes the 400-ball package configuration and C identifies the commercial-temperature option. Design work therefore requires checking the complete device ordering information, bank voltages, package ball assignments, supported memory interfaces, and exposed-pad requirements in the AMD Zynq-7000 documentation before schematic and PCB release. Typical uses include industrial vision, networked control, embedded analytics, communications equipment, sensor processing, and compact edge-computing systems. The processor can manage control-plane software and networking, while the FPGA fabric can execute parallel filtering, image processing, protocol handling, or other latency-sensitive operations. This separation of sequential and parallel workloads is the central architectural benefit of the Zynq-7000 family. A robust design should assign power, ground, and high-speed memory pins according to the official package guidance and keep sensitive interfaces away from noisy switching paths. Designers should also verify Vivado device support, tool-version compatibility, clocking requirements, and exposed-pad thermal implementation for the selected board stack-up. This page combines device identification, package and resource details, drop-in ordering variants, application guidance, and engineering-oriented comparisons. It is intended to accelerate initial device selection while directing final engineering decisions to the manufacturer data sheet, package pinout files, and UG865 package guidance.

Permintaan RFG Kontak
XC7Z014S-1CLG400I - 65K Zynq SoC FPGA | AMD
XC7Z014S-1CLG400I

XC7Z014S-1CLG400I - 65K Zynq SoC FPGA | AMD

AMD XC7Z014S-1CLG400I is a Zynq-7000S system-on-chip FPGA with 65K logic cells, a single Arm Cortex-A9 MPCore processor operating at 667 MHz, and CoreSight debug support in a 400-CSPBGA package measuring 17 x 17 mm. The device combines programmable Artix-7 FPGA logic with an embedded processor system and connectivity including CAN bus, Ethernet, I2C, SPI, UART/USART, USB OTG, and memory interfaces. A Zynq-7000S SoC FPGA is a heterogeneous programmable-logic device that integrates an Arm processor system with FPGA fabric, programmable I/O, memory controllers, and serial peripherals. This combination places software-controlled processing and hardware-parallel logic in one package, supporting the FPGA & CPLD category within the broader integrated-circuit and semiconductor hierarchy. Unlike a discrete processor and FPGA combination, the integrated architecture can reduce inter-device communication and board complexity. The device provides 65K logic cells and a 667 MHz processor clock in the XC7Z014S configuration. Its connectivity options support industrial control, communications equipment, embedded vision, networking appliances, and data-processing systems. CoreSight provides integrated debug visibility for processor and system development. The CLG400 package offers 400 ball contacts and is intended for surface-mount PCB assembly rather than through-hole installation. The target combines a single Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, allowing Linux-capable or bare-metal software workloads to cooperate with dedicated hardware pipelines. Programmable logic can handle parallel interfaces, real-time filtering, protocol acceleration, or sensor aggregation, while the processor manages control flow, operating systems, networking stacks, and supervisory functions. Design engineers should still verify interface timing, memory-device compatibility, pin constraints, and Vivado target support against the AMD data sheet DS187 and package-pinout files. Typical uses include industrial gateways, motor-control and automation platforms, embedded camera and vision systems, communications infrastructure, and data-acquisition equipment. The processor handles configuration and higher-level control, while FPGA logic accelerates fixed-function operations. Connectivity such as Ethernet, CAN bus, USB OTG, UART/USART, SPI, and I2C allows the SoC to interface with sensors, transceivers, memory, and service interfaces without relying exclusively on discrete peripheral devices. The principal design consideration is migration discipline. A device with the same CLG400 package does not automatically qualify as a drop-in replacement because FPGA resources, processor configuration, temperature grade, and exposed interfaces can differ. Confirm the exact ordering code, review the package pinout, regenerate the Vivado constraints, and repeat timing and hardware validation before substituting any alternative into a deployed board. This page combines the XC7Z014S-1CLG400I core specifications with package details, practical application guidance, and explicit migration checks for CLG400 candidates. It is intended to help engineers identify the correct Zynq-7000S configuration, verify pin and resource compatibility, and plan firmware, FPGA-image, and PCB validation before a replacement decision.

Permintaan RFG Kontak
XC7Z014S-1CLG484C - 667MHz Zynq-7000 SoC | AMD
XC7Z014S-1CLG484C

XC7Z014S-1CLG484C - 667MHz Zynq-7000 SoC | AMD

The AMD XC7Z014S-1CLG484C is a Zynq-7000 adaptive system-on-chip combining a single Arm Cortex-A9 MPCore processor running at 667 MHz with CoreSight debug support and 65K Artix-7 FPGA logic cells in a 484-CSPBGA package measuring 19 mm by 19 mm. The device supports 200 I/O, providing a combination of software programmability and FPGA-based hardware acceleration in one package. A Zynq-7000 SoC is an adaptive SoC in the FPGA and embedded-processing hierarchy. Unlike a conventional microprocessor or standalone FPGA, it integrates an ARM-based processing system with programmable logic, dedicated peripherals, memory interfaces, and high-speed I/O. This architecture allows software to control the operating environment while designers implement parallel data paths, protocol handling, signal processing, or hardware accelerators directly in the FPGA fabric. The most prominent product characteristics are the 667 MHz Cortex-A9 processor, 65K logic cells, and 484-CSPBGA package. The single-core processor supports software-oriented control tasks, while the programmable logic provides deterministic parallel operations without a separate FPGA. CoreSight support adds integrated visibility for development and debugging. The package also carries a stated 200 I/O, reducing the need for external interface expansion in designs that use many board-level connections. The CLG484 implementation uses a 0.8 mm ball-grid pitch and a 19 mm by 19 mm body, making high-density escape routing and multilayer PCB construction important engineering considerations. Although the physical package is compact relative to its processing and logic resources, power delivery, decoupling, DDR routing, and thermal management remain substantial layout tasks. Device configuration, software startup, and Vivado-based hardware implementation form a unified development flow around the SoC. Typical uses include industrial control gateways, networked embedded systems, video and image processing, communications equipment, data-acquisition systems, and compact edge-computing platforms. In each case, the ARM processor can manage operating-system-level functions while FPGA logic accelerates streaming data, implements custom interfaces, or performs time-critical processing. The combination can reduce board partitioning compared with a design that uses a separate microprocessor and FPGA. A critical layout consideration is the 0.8 mm BGA pitch. Use the AMD package-pinout resources and the manufacturer's PCB design guidance when assigning power, ground, memory, and high-speed interfaces. Maintain the shortest practical return path for each power rail, provide local high-frequency decoupling at supply pins, and verify the complete stack-up against the selected DDR interface and signal-integrity constraints. This page combines the exact device identity, package details, source-backed specifications, validated replacement considerations, comparison parameters, and implementation guidance needed to evaluate the XC7Z014S-1CLG484C for a new adaptive-SoC design.

Permintaan RFG Kontak
XC7Z014S-1CLG484I - 667MHz Zynq-7000 SoC | AMD | 65K Logic Cells
XC7Z014S-1CLG484I

XC7Z014S-1CLG484I - 667MHz Zynq-7000 SoC | AMD | 65K Logic Cells

The AMD XC7Z014S-1CLG484I is a Zynq-7000 heterogeneous system-on-chip integrating one ARM Cortex-A9 MPCore processor with 65K Artix-7 FPGA logic cells. It operates at 667 MHz and is packaged in a 484-CSPBGA measuring 19 x 19 mm. A programmable system-on-chip combines a hard processor subsystem with programmable logic in one silicon device. The Zynq-7000 hierarchy places the ARM Cortex-A9 processing system above the SoC level, while the Artix-7 programmable logic provides parallel hardware, fixed-function interfaces, and customizable data-processing paths. This combination permits software-controlled Linux or real-time workloads to coexist with deterministic logic implemented beside the processor. The defining features of the XC7Z014S include one ARM Cortex-A9 core, a 667 MHz processor rating, and 65K FPGA logic cells. Its CLG484 ball-grid-array package supports dense board-level integration without requiring separate processor and FPGA packages. CoreSight debug visibility, programmable-logic resources, and fixed hard blocks allow hardware-assisted acceleration, control, networking, and signal-processing systems to share one device. Technically, the device combines a hardwired ARM Cortex-A9 processing subsystem with an FPGA fabric instead of implementing the processor in programmable logic. This architectural separation simplifies software execution and allows suitable control functions to run in the processor while latency-sensitive or parallel operations run in the programmable logic. Exact processor memory, I/O, transceiver, power, and timing limits must be selected from the complete AMD Zynq-7000 data sheet before schematic or timing signoff. Typical uses include industrial control gateways, machine-vision systems, communications equipment, embedded data acquisition, and compact edge-computing platforms. The programmable logic can accelerate filtering, protocol handling, or interface conversion while the processor manages application software, networking, and configuration. The same architecture also suits camera, surveillance, and networking equipment requiring deterministic hardware alongside a general-purpose processor. PCB design should follow the AMD package pinout files, power-sequencing requirements, decoupling recommendations, and high-speed routing guidance. Keep the processor and memory power domains properly conditioned, provide high-quality decoupling at supply pins, and route memory and programmable-logic interfaces with continuous reference planes. Bank-voltage and configuration requirements must also be checked against the selected board architecture. This product record combines the manufacturer data-sheet entry, package information, ordering-code details, compatible family members, and practical implementation guidance. It supports faster evaluation of processor performance, logic capacity, package footprint, software support, and PCB migration while keeping procurement requests and technical validation connected to one concise engineering reference.

Permintaan RFG Kontak
XC7Z014S-2CLG400E - 65K Logic Cell Zynq-7000 SoC | AMD
XC7Z014S-2CLG400E

XC7Z014S-2CLG400E - 65K Logic Cell Zynq-7000 SoC | AMD

The AMD XC7Z014S-2CLG400E is a single-core Arm Cortex-A9 MPCore processor with CoreSight system-on-chip containing 65K Artix-7 FPGA logic cells, operating at 766 MHz, and housed in a 400-CSPBGA package measuring 17 x 17 mm. It combines programmable logic with a hard processor subsystem, DDR memory interfaces, high-speed serial connectivity, and general-purpose I/O in one device. A Zynq-7000 SoC is a heterogeneous system-on-chip that combines an Arm Cortex-A9 processing subsystem with a 7-series FPGA fabric. The processor executes operating systems and application software, while the programmable logic accelerates parallel data processing, controls external interfaces, or implements custom hardware. This integration reduces the number of devices and interconnects required compared with a separate microprocessor and FPGA. The XC7Z014S includes 65K logic cells and a 766 MHz single-core Cortex-A9 MPCore with CoreSight debug support. Its 400-CSPBGA package provides 200 I/O according to the manufacturer product description. The integrated architecture supports designs requiring deterministic programmable-logic timing alongside conventional processor-based control, networking, data acquisition, and user-interface functions. The -2 speed designation identifies the device performance grade, while CLG400 identifies the 400-ball CSPBGA package and the trailing E identifies the specified temperature or product grade. Because FPGA configuration, DDR routing, power delivery, and high-speed differential pairs are tightly coupled, replacement decisions must include both the exact speed suffix and the complete package designation rather than relying only on the Zynq family name. Typical uses include industrial control, communications equipment, embedded vision, test and measurement, audio processing, and embedded servers. The processor side supports conventional software workflows, while the Artix-7 fabric can implement parallel data paths, custom peripherals, high-speed interfaces, or hardware accelerators. The integrated CoreSight facilities also assist design validation and software-oriented debugging. Layout must follow the AMD Zynq-7000 Package Device Pinout Files and the package-specific power, decoupling, and differential-pair guidance. Preserve the assigned power and ground balls, provide the specified voltage rails, route memory and high-speed interfaces with controlled impedance, and use the exposed thermal and assembly requirements defined for the 17 x 17 mm CSPBGA. Validate the complete Vivado design against the exact device and package before fabrication. This page combines the manufacturer specifications, verified device descriptions, package details, practical PCB guidance, and same-footprint upgrade or replacement options for engineers evaluating the XC7Z014S-2CLG400E as a programmable SoC platform.

Permintaan RFG Kontak
XC7Z014S-2CLG400I - 766MHz 65K Logic Zynq SoC | AMD
XC7Z014S-2CLG400I

XC7Z014S-2CLG400I - 766MHz 65K Logic Zynq SoC | AMD

The AMD XC7Z014S-2CLG400I is a Zynq-7000S system-on-chip with one Arm Cortex-A9 MPCore processor, approximately 65,000 FPGA logic cells, a 766 MHz processor operating frequency, and a 400-CSPBGA package measuring 17 x 17 mm. The -2 speed designation and I temperature suffix identify the industrial-grade ordering configuration. A Zynq-7000S system-on-chip belongs to the programmable SoC hierarchy, combining an Arm Cortex-A9 application processor with an FPGA fabric in one device. This integration permits software-controlled operating-system execution and hardware-level parallelism in the same package. The resulting platform is well suited to embedded systems that need flexible I/O, real-time data processing, programmable logic, and software extensibility without using separate processor and FPGA packages. The device provides approximately 65K logic cells and a 766 MHz Arm Cortex-A9 MPCore configuration. The 400-CSPBGA package supports a dense PCB footprint while exposing the device's processor, programmable logic, memory interfaces, and high-speed I/O. Its integrated architecture can shorten signal paths between software-controlled processing and parallel hardware pipelines, reducing inter-component communication overhead in applications such as industrial control, data acquisition, communications, and embedded vision. Programmable logic implements deterministic datapaths, protocol handling, filtering, and interface conversion, while the Cortex-A9 processor executes operating-system software, network stacks, control functions, and user applications. Designers can partition a workload between these resources instead of assigning every operation to software or fixed-function hardware. This mixed implementation model provides flexibility during prototyping and can improve throughput when parallel operations are better suited to FPGA fabric. Typical applications include industrial monitoring equipment, programmable test systems, motor and motion control, embedded communications gateways, camera and image-processing front ends, and sensor-fusion platforms. The processor side can manage configuration, control flow, and external networking, while the programmable logic side accelerates sampling, buffering, filtering, and fixed-format data conversion. The integration is especially useful when deterministic data movement and concurrent software tasks are both required. PCB design must account for the BGA-400 land pattern, power-plane requirements, decoupling, high-speed routing, and thermal management. Follow the AMD package pinout files and Zynq-7000 design guidance when assigning power, ground, clock, memory, and peripheral signals. Validate the completed board for signal integrity and thermal performance before production. This page combines the device architecture, ordering information, package details, verified drop-in candidates, comparison criteria, and practical implementation guidance to support component selection, PCB planning, firmware integration, and hardware acceleration for Zynq-7000S embedded designs.

Permintaan RFG Kontak
XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD
XC7Z014S-2CLG484E

XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD

The AMD Xilinx XC7Z014S-2CLG484E is a Zynq-7000 system-on-chip FPGA with 65,000 logic cells, a single-core Arm Cortex-A9 processor operating at 766 MHz, and 256 KB of on-chip RAM. The device is packaged in a 484-CSPBGA package measuring 19 mm by 19 mm. It combines programmable logic, a hard processor subsystem, CoreSight debug support, and integrated memory into one heterogeneous processing platform. A Zynq-7000 SoC is an FPGA and SoC in the same silicon device. Its Arm Cortex-A9 processing subsystem executes operating systems, networking stacks, control software, and application code, while the Artix-7 FPGA fabric implements parallel datapaths, custom accelerators, protocol engines, and time-critical logic. This programmable-logic-plus-processor hierarchy places the device between conventional FPGAs, microcontrollers, and dedicated application-specific processors. The XC7Z014S offers 65,000 programmable logic cells for hardware customization, along with 766 MHz Arm Cortex-A9 performance and 256 KB of on-chip RAM. The -2 speed designation identifies the device performance grade, while the E suffix identifies its temperature grade. Its 484-pin CSPBGA package exposes the processing, programmable-logic, memory, power, ground, configuration, and general-purpose I/O resources required for a high-pin-count module design. The heterogeneous architecture allows software to control the system while programmable logic handles deterministic data acquisition, filtering, waveform generation, video processing, or interface bridging. Pin multiplexing must be planned carefully because many hard I/O functions can be assigned to programmable I/O through the design toolchain. Power sequencing, bank-specific supply requirements, decoupling, configuration boot, and high-speed memory implementation are central PCB-design considerations for this device. Typical uses include industrial automation and factory control, industrial Ethernet equipment, camera and image-processing systems, communications infrastructure, edge-computing gateways, instrumentation, and embedded vision. The Cortex-A9 subsystem handles network protocols and control logic, while the FPGA fabric can execute parallel algorithms such as filtering, packet inspection, data acquisition, and hardware-assisted image processing without relying solely on the processor. A robust design should follow the AMD Zynq-7000 power, decoupling, configuration, and package-layout guidance. Use the recommended regulator topology for each supply bank, preserve the specified startup sequence, and validate high-speed interfaces with controlled impedance routing. Consider processor-resource and logic-resource utilization together because software placement, memory bandwidth, and hard I/O selection can determine whether the design fits the selected XC7Z014S device. This product record combines package, processor, logic-capacity, memory, pinout-resource, comparison, sourcing, and implementation guidance in one engineering-focused reference. It also distinguishes speed-grade and temperature-grade alternatives that use the same CLG484 footprint, helping designers evaluate replacement options without overlooking migration constraints.

Permintaan RFG Kontak
XC7Z014S-2CLG484I - 65K Zynq SoC with Cortex-A9 | AMD
XC7Z014S-2CLG484I

XC7Z014S-2CLG484I - 65K Zynq SoC with Cortex-A9 | AMD

The AMD XC7Z014S-2CLG484I is a Zynq-7000 SoC FPGA integrating a single ARM Cortex-A9 MPCore processing system with CoreSight debug support and 65K Artix-7 programmable logic cells. The device operates at 766 MHz and is packaged in a 484-CSPBGA measuring 19 mm by 19 mm. It combines a hard processor, programmable logic, memory controllers, and connectivity interfaces in one mixed-signal system-on-chip package. A Zynq SoC is a system-on-chip that combines an ARM processing system with FPGA programmable logic. Its product hierarchy runs from FPGA and SoC to adaptive SoC and embedded processing. The processing system executes operating systems and control software, while the programmable logic implements parallel data paths, hardware accelerators, custom interfaces, and time-critical signal processing. This division allows one device to consolidate functions that might otherwise require a separate microcontroller and FPGA. The XC7Z014S uses a 28 nm process and provides 200 I/O according to the product listing. Its single Cortex-A9 processor includes the Cortex-A9 MPCore architecture and CoreSight debugging, while the Artix-7 logic fabric provides 65K logic cells. The -2 speed designation corresponds to the listed 766 MHz processor operating point. Its CLG484 package also supports DDR memory interfaces and other programmable-logic I/O needed by embedded control, communications, and industrial systems. The integrated architecture permits hardware acceleration without a separate FPGA-to-SoC interconnect. Parallel functions can execute in programmable logic while the ARM core manages control flow, operating systems, or network protocols. This can reduce board area and latency, although firmware, Vivado implementation, hardware/software partitioning, DDR layout, and clocking must be designed as one coherent system. Pin assignments and power sequencing should follow the AMD Zynq-7000 package documentation and pinout files. Typical uses include industrial machine control, factory automation, networked embedded controllers, sensor and vision preprocessing, communications gateways, and test equipment. The Cortex-A9 side is appropriate for Linux or RTOS-based supervisory control, while programmable logic can accelerate data acquisition, protocol conversion, motor-control algorithms, or custom video and communications pipelines. The 200-I/O count supports integration of DDR, transceivers, control signals, and external memory. Power planning is central to a 484-CSPBGA design. The processor, programmable logic, and high-speed memory interfaces can create substantial dynamic and thermal loads even though the part is not a conventional linear power device. Use the AMD data sheet for recommended rails, sequencing, decoupling, and operating limits. Place bypass capacitors at the supply pins, route power and ground planes carefully, and provide thermal copper around the BGA while avoiding via stubs in sensitive nets. This page combines the manufacturer data-sheet link, exact device specifications, package details, practical Zynq design guidance, and clearly qualified same-package alternatives. It also distinguishes speed and temperature-grade options so engineers can identify a potential hardware replacement without mistaking it for a complete system-level equivalence.

Permintaan RFG Kontak
XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD
XC7Z015-1CL485I

XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD

The AMD XC7Z015-1CL485I is a Zynq-7000 system-on-chip FPGA combining a dual-core Arm Cortex-A9 processor with 74K Artix-7 FPGA logic cells in a 484-CSPBGA package operating at 667 MHz. It integrates programmable logic, dual-core Arm processing, memory interfaces, and high-speed connectivity for embedded control, industrial automation, communications, and edge-processing systems. The verified distributor description identifies the device as a system-on-chip with dual Arm Cortex-A9 MPCore and CoreSight technology. A Zynq-7000 SoC FPGA is more than a conventional FPGA: it combines a hard processor subsystem with programmable logic in one device. This heterogeneous architecture allows software tasks to run on the Arm processor while dedicated hardware accelerates parallel logic, interface, signal-processing, or control functions. The XC7Z015-1CL485I belongs to the Zynq-7000 family and is identified by the 74K logic-cell configuration. Key verified characteristics include dual Arm Cortex-A9 MPCore processing, CoreSight debug support, 74K FPGA logic cells, 667 MHz operation, and a 484-CSPBGA package measuring 19 x 19 mm. These attributes make the part suitable for embedded systems that need both sequential software execution and programmable hardware. Its integrated architecture can reduce external component count compared with separate processor and FPGA implementations. The device is supplied under the exact ordering code XC7Z015-1CL485I. The verified distributor records show product availability, pricing, inventory, and SoC FPGA descriptions, while the exact electrical limits, temperature ratings, memory interfaces, I/O standards, and power characteristics are not provided in the supplied data. Engineers should therefore verify the complete manufacturer datasheet and package pinout before finalizing a design. Typical applications include industrial factory control, network-connected embedded systems, camera and image-processing front ends, robotics, communications equipment, and low-power edge computing. The processor subsystem is suitable for control software, networking stacks, and operating-system support, while the programmable fabric handles parallel datapaths, interfaces, or accelerators. A critical design consideration is the dense BGA package and its many power, ground, and high-speed pins. PCB layout, decoupling, bank voltage planning, signal integrity, and thermal management must be developed against the official package information. This page summarizes verified distributor information and identifies parameters requiring manufacturer-data confirmation before release to fabrication. This page combines exact distributor metadata, application guidance, package considerations, and sourcing information intended to help engineers evaluate XC7Z015-1CL485I efficiently while avoiding unsupported technical assumptions.

Permintaan RFG Kontak
XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD
XC7Z015-1CLG485C

XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD

The AMD XC7Z015-1CLG485C is a Zynq-7000 adaptive SoC combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 485-CSPBGA package. It operates at 667 MHz, provides 74K FPGA logic cells, and integrates 130 PS I/O with 150 programmable FPGA I/O. The device is designed for embedded systems that require programmable hardware acceleration alongside a coherent Arm-based software environment. A Zynq-7000 adaptive SoC is a heterogeneous system-on-chip that places an Arm processor system and FPGA fabric in one package. The processor subsystem supports Linux and standalone applications, while the FPGA fabric implements parallel data paths, custom interfaces, accelerators, and time-critical control logic. This integration reduces interconnects between the processor and programmable logic compared with a two-chip architecture while preserving the flexibility of FPGA-based hardware. The XC7Z015 combines two Arm Cortex-A9 MPCore processors with CoreSight debug support and 74K Artix-7 logic cells. Its 667 MHz processor rating supports operating-system-based control, communications management, and application processing. The 150 FPGA I/O expand interface options for external memory, networking, industrial interfaces, image acquisition, and embedded peripherals. The integrated processor, memory interfaces, fabric, and I/O make the device suitable for compact embedded platforms where board area and system integration are priorities. The CLG485 package uses a 19 mm by 19 mm CSP-BGA format and places 485 signal or power positions beneath the device. A 1.05 V supply rating is identified for the processor core, although the complete power architecture requires multiple rails and strict sequencing. The commercial-grade part is specified from 0°C to 85°C, making it appropriate for temperature-controlled industrial, communications, instrumentation, and test equipment rather than uncased automotive or extreme-temperature installations. Typical applications include industrial control gateways, machine vision, communications infrastructure, test and measurement systems, embedded servers, and network appliances. In each case, the processor can run control-plane software while FPGA logic accelerates data movement, protocol handling, filtering, encryption, or sensor acquisition. The heterogeneous architecture is especially useful when deterministic parallel behavior and conventional operating-system support are both required. Design work should begin with the AMD Zynq-7000 technical reference material and the CLG485 package placement diagram. Confirm every power rail, decoupling requirement, configuration interface, memory topology, and pin multiplexing decision against the manufacturer documentation. The 19 mm by 19 mm BGA also requires careful escape-routing planning, inspection access, and substrate-aware thermal design. This product page consolidates the confirmed device identity, package information, operating limits, engineering use cases, compatible device variants, and selection considerations into one design-oriented reference for engineers evaluating the XC7Z015-1CLG485C.

Permintaan RFG Kontak