AMD

XC7Z010-3CLG225E - 866MHz Dual Cortex-A9 SoC | AMD

MPN: XC7Z010-3CLG225E ✓ Aktif
1 V Vdss 225-CSPBGA, 13 x 13 mm Package 866 MHz Speed 256 KB Memory
MOQ: 1 |

XC7Z010-3CLG225E Ringkasan

AMD XC7Z010-3CLG225E is a Zynq-7000 programmable system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with 28K Artix-7 FPGA logic cells, an 866 MHz processor rating, and CoreSight debug support in a 225-CSPBGA package measuring 13 x 13 mm. It integrates programmable logic, hard processors, memory controllers, and programmable I/O in one device.

A Zynq-7000 SoC is a heterogeneous programmable-logic device combining an FPGA fabric with one or more Arm processor cores. In the product hierarchy, XC7Z010-3CLG225E is a Zynq-7000 system-on-chip, an FPGA & CPLD integrated circuit, and a semiconductor platform suitable for embedded control, industrial automation, communications, image processing, and general-purpose edge systems.

The device provides 28,000 logic cells and a dual-core Arm Cortex-A9 configuration at up to 866 MHz. Its 225-CSPBGA package supports a compact board layout, while the -3 speed grade targets higher operating performance than the lower-speed Zynq-7000 options. The CLG225 device also provides four external ADC signal pairs, as described in AMD documentation for the 7z010 CLG225 family.

AMD DS187 covers XC7Z010 and its related Zynq-7000 devices, including DC and AC switching characteristics. The listed 28 nm fabrication technology and 1 V core-side operating designation identify the device as a programmable logic and embedded-processing platform rather than a conventional standalone microprocessor. Its architecture allows software running on the Arm cores to control FPGA fabric for parallel datapaths, hardware acceleration, interface adaptation, and deterministic real-time processing.

Typical applications include industrial control gateways, networked embedded systems, video and image-processing subsystems, communications equipment, test and measurement platforms, and programmable sensor nodes. The dual-core processor supports concurrent software workloads, while the FPGA fabric can accelerate data movement or implement custom peripherals without adding a separate FPGA to the board.

PCB design must follow the AMD Zynq-7000 CLG225 package and pinout documentation, including ball assignments, power rails, decoupling, clocking, and high-speed routing requirements. Designers should also account for programming, boot configuration, thermal performance, and the relationship between the 866 MHz processor rating and the power required by the selected power-management design.

This product record combines the device architecture, package details, practical application guidance, and speed-grade comparison in one place. It helps engineers distinguish the -3 CLG225 device from lower-speed variants and evaluate whether the integrated processor-FPGA architecture fits a specific embedded design before beginning schematic capture and PCB layout.

Alternatif penggantian untuk XC7Z010-3CLG225E — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian XC7Z010-3CLG225E (sama faktor bentuk dan footprint) — berbeda di dalam Package, FPGA Logic Cells, External ADC Signal Pairs, Processor Core, RoHS Status.

AMD
Package: 225-CSPBGA (13x13 mm)
FPGA Logic Cells: 28K
External ADC Signal Pairs: 4 (differential inputs)
Bandingkan dengan XC7Z010-3CLG225E →
AMD
Package: 400-CSBGA
Processor Core: Dual Arm Cortex-A9 MPCore
Bandingkan dengan XC7Z010-3CLG225E →

XC7Z010-1CLG225C

✅ Drop-In
AMD
📦 225-CSPBGA
Zynq-7000 Artix-7 FPGA SoC · 2 Arm Cortex-A9 cores · 667 MHz · 28K cells · CoreSight · 225-CSPBGA · 13 x 13 mm · 225 balls

Kontak untuk harga

Lihat Datasheet →

XC7Z010-1CLG225I

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 225-CSPBGA
Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 28K · 225-CSPBGA (13x13 mm) · -40°C to +100°C (Industrial) · 1.0V · 0.95V · 1.05V

Kontak untuk harga

Lihat Datasheet →

XC7Z010-2CLG225C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 225-CSPBGA
Lower -2 speed grade replaces the -3 grade while retaining the same XC7Z010 CLG225 footprint

📋 Alternatif referensi (tidak dalam katalog)

XC7Z010-2CLG225I

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 225-CSPBGA
Spesifikasi yang cocok

Kontak untuk harga

XC7Z010-1CLG400C

✅ Drop-In
AMD
📦 400-CSPBGA
Zynq-7000 All Programmable System on Chip · Dual Arm Cortex-A9 MPCore · 667 MHz · 28,000 cells · 35,200 registers · 60 block RAMs · 240 Kbit · 80 multipliers (18x25)

Kontak untuk harga

Lihat Datasheet →

XC7Z010-3CLG225E Rating Maksimal & Karakteristik Listrik

Device Type Zynq-7000 programmable system-on-chip
Processor Cores 2 Arm Cortex-A9 MPCore cores
Maximum Processor Frequency 866 MHz
FPGA Logic Cells 28,000 cells
FPGA Family Artix-7
Process Technology 28 nm
Core Supply Designation 1 V
Paket 225-CSPBGA, 13 x 13 mm
Package Pin Count 225 pins
Tipe Mounting Surface mount
External ADC Signal Pairs 4 differential pairs
Debug Support CoreSight
Embedded Memory 256 KB
Speed Grade -3
Status RoHS RoHS
Packaging Type Tray

XC7Z010-3CLG225E 225 pins Diamant Konfigurasi Panduan

Konfigurasi pin untuk XC7Z010-3CLG225E (225 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 225 pins untuk XC7Z010-3CLG225E

Tidak ada data diatribut pin yang tersedia untuk XC7Z010-3CLG225E.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

XC7Z010-3CLG225E cocok untuk 6 aplikasis: Industrial Control Gateway, Industrial Image Processing, Network Communications Equipment, Programmable Sensor Node, Test and Measurement Equipment, Secure Embedded Platform.

🏭

Industrial Control Gateway

XC7Z010-3CLG225E fits industrial gateways that combine supervisory software with deterministic hardware I/O. The dual Arm Cortex-A9 cores, operating up to 866 MHz, can handle communications protocols, configuration logic, and supervisory tasks, while the 28,000-cell Artix-7 fabric can implement protocol conversion or parallel data processing. In a control gateway, the FPGA section can reduce the processor burden for deterministic packet handling and time-critical I/O. The CLG225 package measures 13 x 13 mm, but the board still needs careful BGA escape routing, power sequencing, and thermal design. Confirm the industrial temperature requirement against the selected ordering suffix before release.

📺

Industrial Image Processing

XC7Z010-3CLG225E is useful in image-processing modules where software control and parallel pixel processing must coexist. The 28,000 logic cells can implement preprocessing pipelines, thresholding, filtering, or interface conversion, while the dual Arm Cortex-A9 cores manage image buffers, control flow, and higher-level processing. The processor’s 866 MHz rating supports a faster software control path than the 667 MHz -1 grade, although power and thermal requirements should be compared. The 225-CSPBGA package can reduce board area, but signal integrity for high-speed image links, DDR memory routing, and multilayer return paths must be addressed in layout.

🌐

Network Communications Equipment

XC7Z010-3CLG225E can support network appliances that require flexible packet handling alongside embedded Linux or real-time software. Arm Cortex-A9 cores running at up to 866 MHz are suitable for management planes and protocol stacks, while the programmable logic can accelerate framing, filtering, serialization, or custom interfaces. This separation can reduce the load on the general-purpose processor and provide deterministic hardware behavior. The four external ADC signal pairs do not replace dedicated network PHYs, but they can support analog monitoring functions. A communications design should use AMD’s CLG225 pinout files for high-speed escape routing and verify power integrity across processor and FPGA activity.

🧩

Programmable Sensor Node

XC7Z010-3CLG225E is suitable for sensor nodes that combine edge processing with programmable acquisition logic. The FPGA fabric can implement filters, event detectors, counters, or sensor-specific timing, while the dual Cortex-A9 cores perform calibration, configuration, networking, and data packaging. A 13 x 13 mm CLGGA package helps reduce board area in compact embedded systems, although BGA assembly and inspection require appropriate PCB and manufacturing planning. The 866 MHz -3 rating favors designs with substantial software processing, while a lower-speed variant may reduce power demand. Four external ADC differential pairs provide limited analog input capability that must be matched to the sensor architecture.

🔧

Test and Measurement Equipment

XC7Z010-3CLG225E supports test and measurement products that need flexible timing, acquisition, and control logic. The 28,000-cell programmable fabric can implement counters, pattern generation, trigger logic, or instrument-specific interfaces, while the dual Arm Cortex-A9 cores run control software and coordinate measurements. The higher 866 MHz -3 processor rating can shorten control-loop latency compared with a 667 MHz -1 device, subject to power and timing validation. For instrumentation, decouple the processor and FPGA rails carefully, maintain short return paths for high-speed signals, and use the AMD package files to distinguish analog, clock, and digital I/O assignments. Four ADC differential pairs may assist auxiliary monitoring but are not a full replacement for a precision converter.

🔒

Secure Embedded Platform

XC7Z010-3CLG225E can serve as an embedded security platform that combines a conventional processor software model with programmable hardware. Arm Cortex-A9 cores can execute authentication, protocol, and control software, while the Artix-7 fabric can implement hardware-assisted cryptography, secure boot support functions, or specialized bit processing. The integrated architecture can reduce inter-component communication compared with separate processor and FPGA devices. Engineering teams must still design the external flash, key storage, debug access, and boot configuration correctly. The -3 grade provides an 866 MHz processor rating, but the selected security mechanism, timing constraints, temperature range, and power budget should be reviewed before selecting a drop-in speed-grade alternative.

What are the key specifications of XC7Z010-3CLG225E that engineers should know?
XC7Z010-3CLG225E integrates two Arm Cortex-A9 MPCore processors, 28,000 Artix-7 logic cells, and CoreSight debug in a 225-CSPBGA package. According to AMD DS187 and the AMD product documentation, the processor rating is 866 MHz and the device is manufactured using 28 nm technology. The CLG225 package measures 13 x 13 mm and includes four external ADC differential signal pairs. These figures establish the part as a compact, heterogeneous FPGA and processor platform rather than a standalone microcontroller.
What is the XC7Z010-3CLG225E used for?
XC7Z010-3CLG225E is used when a design needs both a processor-based control path and programmable hardware acceleration in one package. The dual Arm Cortex-A9 cores can run operating-system or bare-metal software, while the 28,000-cell Artix-7 fabric can implement parallel pipelines, custom interfaces, accelerators, or additional I/O. AMD DS187 covers the XC7Z010 family, and the CLG225 documentation identifies four external ADC signal pairs. It is therefore suited to industrial control, communications, image processing, and embedded edge systems.
What is the difference between XC7Z010-3CLG225E and XC7Z010-1CLG225C?
The principal documented difference is the speed grade: XC7Z010-3CLG225E has an 866 MHz processor rating, while XC7Z010-1CLG225C is listed at 667 MHz. Both use the 225-CSPBGA package and the same XC7Z010 device family, allowing the -1 device to serve as a lower-performance migration option. AMD DS187 should be checked for the exact speed-versus-power and timing characteristics required by the final design. This comparison does not imply that every timing target transfers without review.
When should I choose XC7Z010-3CLG225E over XC7Z010-1CLG225C?
Choose XC7Z010-3CLG225E when processor throughput, accelerator performance, or system timing requires the -3 speed grade rather than the 667 MHz -1 option. The -3 part provides a 866 MHz processor rating, while XC7Z010-1CLG225C provides 667 MHz, a difference of 199 MHz. Both occupy the 225-CSPBGA footprint, so selection can focus on performance and power rather than a mandatory package redesign. Confirm the resulting power budget and timing closure in AMD DS187 before releasing the design.
What can replace XC7Z010-3CLG225E?
XC7Z010-1CLG225C, XC7Z010-1CLG225I, XC7Z010-2CLG225C, and XC7Z010-2CLG225I are same-package Zynq-7000 migration candidates for XC7Z010-3CLG225E. Each retains the XC7Z010 dual-core processor and 28K-logic-cell device basis in the CLG225 package, but the speed grade and temperature suffix change. These are frequency- and temperature-grade alternatives, not unqualified functional equivalents. Review AMD DS187, the package data, and the original design constraints before substitution.
Is XC7Z010-1CLG225C the same as XC7Z010-3CLG225E?
No. XC7Z010-1CLG225C and XC7Z010-3CLG225E belong to the same Zynq-7000 XC7Z010 family and use the same 225-CSPBGA package, but their speed grades differ. The -1 version is listed at 667 MHz, whereas the -3 version is listed at 866 MHz. The -3 device is the better choice when the original design depends on the higher processor rating; the -1 version may suit designs with lower timing requirements and revised power constraints.
Where can I find the XC7Z010-3CLG225E datasheet and pinout?
The official XC7Z010-3CLG225E datasheet is available through AMD DS187 at the AMD documentation link listed on this page. For the CLG225 ball assignments, use the AMD Zynq-7000 package and pinout resources, including UG865 and the associated package-device pinout files. AMD documentation for the 7z007s and 7z010 CLG225 devices also confirms the four external ADC signal pairs. The package documentation should be the authority when assigning power, ground, clock, and user I/O balls.
How many ADC channels does XC7Z010-3CLG225E provide?
The XC7Z010-3CLG225E CLG225 device provides four external ADC signal pairs, meaning four differential input pairs. AMD documentation explicitly identifies this reduced external ADC complement for the 7z007s and 7z010 CLG225 devices, while other Zynq-7000 devices provide 12 external pairs. Each pair uses two signal connections, so a design needing more than eight external ADC inputs must use another sampling device or select a different Zynq package.
What is the XC7Z010-3CLG225E package?
XC7Z010-3CLG225E is packaged in a 225-CSPBGA with 225 package contacts and a nominal 13 x 13 mm body. The CLG225 designation identifies the same package family used by several XC7Z010 speed and temperature options. Because BGA escape routing, thermal management, and ball assignments are package-specific, use the AMD CLG225 package drawing and pinout files during PCB layout. Do not substitute a generic QFN or BGA footprint without a complete land-pattern comparison.
Is XC7Z010-3CLG225E suitable for industrial control systems?
Yes, XC7Z010-3CLG225E is suitable for industrial control systems that benefit from a processor running alongside programmable logic. The dual Arm Cortex-A9 cores provide software execution for communications and supervisory functions, while the 28,000-cell Artix-7 fabric can implement deterministic control, protocol conversion, or data acquisition logic. The 866 MHz -3 grade provides more processor performance than the 667 MHz -1 option. Industrial temperature and qualification requirements must be confirmed against the specific ordering suffix and AMD documentation.
How much power does XC7Z010-3CLG225E consume?
XC7Z010-3CLG225E power consumption depends on processor activity, FPGA utilization, I/O activity, voltage, temperature, and the selected power-management configuration. AMD DS187 contains the device-specific DC and AC operating characteristics needed for a worst-case power budget. The -3 speed grade can require additional power relative to lower-speed grades, so the 866 MHz processor rating should not be used alone to estimate thermal performance. Evaluate the design across operating modes and provide the required decoupling, regulation, and board thermal paths.
Can XC7Z010-3CLG225E be used as a drop-in replacement for XC7Z010-2CLG225E?
XC7Z010-3CLG225E can be considered a same-footprint migration candidate for XC7Z010-2CLG225E because both use the XC7Z010 CLG225 package, but it is not automatically a zero-risk drop-in replacement. The ordering codes indicate different speed grades, and the -3 version has a higher 866 MHz processor rating than the -2 option. Validate timing, power consumption, thermal rise, device-identification handling, and production-programming requirements before substitution.
Where to buy XC7Z010-3CLG225E online?
Use the Request a Quote form on this XAIPART page to request XC7Z010-3CLG225E availability, current lead time, minimum order quantity, and a formal quotation. Include the complete ordering code XC7Z010-3CLG225E and your required packaging method when submitting the request. For a production design, also specify date-code, traceability, and inspection requirements so the supplier can confirm the appropriate AMD/Xilinx material.
What is the lead time for XC7Z010-3CLG225E?
The current lead time for XC7Z010-3CLG225E depends on factory inventory, requested quantity, and packaging availability. Submit the Request a Quote form on this page with your required quantity and target delivery date to obtain a current commitment. For new production deployments, request a buffer against the planned build schedule and ask for written confirmation of allocation and traceability. These steps avoid treating an unconfirmed availability statement as a guaranteed delivery date.
Is XC7Z010-3CLG225E in stock?
Use the Request a Quote form on this XAIPART page to check the current stock position for XC7Z010-3CLG225E. Include your required quantity, packaging preference, and production schedule in the request. The device is identified as an active Zynq-7000 product, but availability for a particular order still depends on channel inventory and factory allocation. A written quotation and delivery confirmation should be used before committing the component to a build schedule.
What is the best cross-brand equivalent for XC7Z010-3CLG225E?
There is no cross-brand equivalent supported by the available component references for XC7Z010-3CLG225E. Its combination of a dual Arm Cortex-A9 processor, 28,000 FPGA logic cells, 866 MHz speed grade, and 225-CSPBGA package is specific to the AMD/Xilinx Zynq-7000 platform. The defensible replacement choices are same-brand XC7Z010 CLG225 speed or temperature variants. A functionally similar FPGA plus a separate processor would require a board-level redesign and is not a drop-in substitute.

Data referensi engineering untuk XC7Z010-3CLG225E — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose XC7Z010-3CLG225E when a compact 13 x 13 mm design needs the 866 MHz -3 speed grade, two Arm Cortex-A9 cores, and 28,000 Artix-7 logic cells in the same package. Select XC7Z010-2CLG225I when the same CLG225 footprint is preferred but the lower -2 performance and industrial temperature grade are acceptable. XC7Z010-1CLG225C and XC7Z010-1CLG225I provide the 667 MHz -1 class and may reduce performance and power requirements, but timing and temperature must be revalidated. XC7Z010-1CLG400C retains the same XC7Z010 processing and logic resources while offering more package contacts and external ADC pairs, but it requires a different PCB footprint. For every replacement, verify speed, temperature, power, timing, boot configuration, and package compatibility before release.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini XC7Z010-1CLG225C XC7Z010-1CLG225I XC7Z010-2CLG225C XC7Z010-2CLG225I XC7Z010-1CLG400C
Brand AMD AMD AMD AMD AMD AMD
Package 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 400-CSPBGA
Processor Configuration Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore
FPGA Logic Cells 28,000 cells 28,000 cells 28,000 cells 28,000 cells 28,000 cells 28,000 cells
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade -3 -1 -1 -2 -2 -1
Temperature Suffix E C I C I C
External ADC Signal Pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs 12 differential pairs
Core Supply Designation 1 V 1 V 1 V 1 V 1 V 1 V
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight

Diferensiator Kunci

  • Higher -3 processor speed rating within the XC7Z010 family (vsXC7Z010-1CLG225C)
  • Compact 225-CSPBGA implementation (vsXC7Z010-1CLG400C)
  • Four external ADC differential pairs (vsXC7Z010-1CLG400C)

Catatan Desain

Design the power tree for the XC7Z010-3CLG225E from AMD DS187 rather than from the 866 MHz headline frequency alone. Account separately for processor activity, Artix-7 fabric utilization, I/O loading, temperature, and the selected DC/DC topology. Place required bulk and high-frequency decoupling capacitors directly beside their assigned package balls, follow the documented voltage rails and sequencing requirements, and verify ripple against the applicable DC specifications. The -3 speed grade should be power-checked against lower speed grades before treating it as a direct migration option.

Use the AMD Zynq-7000 CLG225 package and pinout files as the authority for every ball assignment and escape route. The 225-CSPBGA land pattern requires via-in-pad or carefully designed escape routing, reference-plane continuity, and assembly-compatible pad geometry. Keep high-speed processor, memory, and FPGA interfaces away from noisy switching nodes, and provide short ground connections for every supply-return path. Do not reuse a generic BGA footprint because pad diameters, ball maps, and exposed thermal requirements are package-specific.

Establish a thermal model that separates sustained processor load from intermittent FPGA activity and I/O switching. The 866 MHz -3 grade can consume more power than lower-speed XC7Z010 options, while the compact 13 x 13 mm CSPBGA limits the available heat-spreading area. Use the package thermal data and a board-specific thermal model to size copper areas, thermal vias, airflow, or a heat spreader. Validate junction temperature across ambient temperature, processor utilization, and the required industrial or extended-temperature operating range.

Do not treat a lower speed grade or temperature suffix as automatically equivalent. XC7Z010-1CLG225C changes both performance class and temperature grade relative to XC7Z010-3CLG225E, while CLG400 alternatives require a different PCB footprint. Check processor timing, fabric timing, power limits, boot behavior, and production programming requirements. Use the exact ordering code in schematics, BOMs, and programming documentation to prevent a valid-looking but functionally unsuitable substitution from entering manufacturing.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The product listing identifies the XC7Z010-3CLG225E as RoHS compliant. Specific REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require manufacturer documentation or a supplier declaration for the exact lot.

Pencarian Terkait

xc7z010 3clg225e xc7z010 datasheet xc7z010 1clg400c xc7z010 1clg400i xc7z010 2clg400i xc7z010 1clg225c xc7z010 1clg225i xc7z010 1clg400c datasheet xc7z010 2clg225i xc7z010 1clg400i datasheet xc7z010 3clg225e pinout xc7z010 3clg225e replacement xc7z010 3clg225e price amd xc7z010 3clg225e xc7z010 3clg225e vs xc7z010 2clg225i

Komponen dan Istilah Terkait

AMD AMD/Xilinx XC7Z010-3CLG225E XC7Z010-1CLG225C XC7Z010-1CLG225I XC7Z010-2CLG225C XC7Z010-2CLG225I XC7Z010-1CLG400C Zynq-7000 system-on-chip Artix-7 FPGA Arm Cortex-A9 MPCore CoreSight FPGA & CPLD programmable logic hard processor subsystem 225-CSPBGA BGA package surface-mount semiconductor 28 nm process technology 866 MHz 28,000 logic cells external ADC signal pairs industrial control image processing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ