Produk (46.000+)

XC7Z030-L2FBG676I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z030-L2FBG676I

XC7Z030-L2FBG676I - Dual Cortex-A9 Zynq SoC | AMD

The AMD XC7Z030-L2FBG676I is a programmable system on chip combining a dual-core Arm Cortex-A9 MPCore processing system with Zynq-7000 Kintex-7 FPGA logic, 125K logic cells, an 800 MHz processor operating frequency, and CoreSight debug support in a 676-ball FCBGA package measuring 27 mm by 27 mm. The device combines programmable hardware, hard processors, memory interfaces, and high-speed connectivity within one package. A system on chip, or SoC, integrates a programmable logic fabric with one or more processors and dedicated peripherals. The Zynq-7000 architecture belongs to the FPGA and embedded-processing hierarchy: it combines Kintex-7 FPGA resources with a dual-core Arm Cortex-A9 subsystem. This architecture allows software running on the processor system to control algorithms implemented in programmable logic, reducing the need for separate processor and FPGA packages while avoiding a requirement for programmable logic in every digital function. The XC7Z030-L2FBG676I provides 125K logic cells and an 800 MHz dual-core Arm Cortex-A9 processing configuration. Its integrated FPGA fabric supports parallel datapaths, protocol handling, signal processing, and hardware-assisted control functions. CoreSight enables integrated debug visibility, while the combined processing and programmable-logic architecture supports heterogeneous designs in which control software and hardware pipelines operate together. The FBG676 package is a 676-ball FCBGA with a stated 27 mm by 27 mm body size. Ball pitch, exposed-pad requirements, power-plane distribution, and high-speed escape routing must be handled according to the manufacturer package and design documentation. Because this package contains a large number of power, ground, configuration, processor, memory, and programmable-I/O connections, a successful layout depends on the complete pinout and recommended power architecture rather than functional blocks alone. Typical uses include industrial control, machine vision, test and measurement, communications equipment, embedded edge processing, and mixed processor-plus-logic systems. The dual Cortex-A9 subsystem is suited to operating systems, network services, and supervisory control, while the FPGA fabric can accelerate sampling, filtering, encoding, data movement, and other timing-critical tasks. For a new design, treat the device as a complete platform rather than a conventional low-power MCU. Plan the power rails, decoupling network, DDR memory interface, clocking, configuration mechanism, boot storage, debug access, and high-speed PCB layout before schematic capture. Programmable logic timing must also be constrained and validated for the intended clocking and I/O architecture. This product page consolidates the identified package, processing, logic-capacity, and interface characteristics, compares same-family configuration options, and highlights practical implementation considerations that help engineers evaluate the XC7Z030-L2FBG676I for embedded FPGA systems.

Permintaan RFG Kontak
XC7Z030-L2FFG676I - Dual Cortex-A9 800MHz SoC FPGA | AMD
XC7Z030-L2FFG676I

XC7Z030-L2FFG676I - Dual Cortex-A9 800MHz SoC FPGA | AMD

The AMD XC7Z030-L2FFG676I is a Zynq-7000 Kintex-7 system-on-chip with 125K logic cells, a dual-core ARM Cortex-A9 processor operating up to 800 MHz, and a 676-terminal FCBGA package measuring 27 mm by 27 mm. It combines programmable logic, ARM processing, CoreSight debug, and programmable I/O in one device, making it suitable for embedded control, industrial automation, networking, image processing, and communications equipment. A system-on-chip, or SoC, integrates a microprocessor and programmable logic within one semiconductor package. The Zynq-7000 architecture places an ARM Cortex-A9 processing system alongside Kintex-7 FPGA fabric and dedicated I/O resources. Instead of using separate discrete processors and FPGAs, a design can implement control software in the ARM subsystem while accelerators, interfaces, and parallel logic operate independently in the programmable-logic section. The device provides 125K FPGA logic cells and supports an 800 MHz processor operating point. Its 676-FCBGA package provides a large, high-density interconnect for programmable I/O, memory interfaces, high-speed transceivers, and processor peripherals. The industrial-oriented ordering code supports operation from -40°C to +100°C, while the CMOS device operates from a 0.95 V to 1.05 V core supply range. The target uses the -L2 speed designation and the FFG676 package configuration. The architecture separates hard processor functionality from programmable fabric. ARM software controls the operating system, networking stack, drivers, and application logic, while FPGA fabric can implement deterministic datapaths, custom accelerators, protocol handling, or high-speed I/O. CoreSight support adds visibility for processor and system debugging, which is valuable during hardware bring-up, software integration, and production fault analysis. Typical applications include industrial motor and motion controllers, machine-vision systems, industrial Ethernet equipment, embedded data acquisition, radar and signal-processing front ends, programmable network appliances, and test-and-measurement instruments. The combination of dual-core ARM processing and 125K logic cells allows hardware-specific functions to remain in fabric while operating-system workloads execute in the processor subsystem. PCB implementation requires careful allocation of power, ground, clocking, and high-speed I/O resources. Follow the manufacturer package pinout, power-decoupling recommendations, and PCB design guidance exactly. Preserve the distinction between the -L2, -1, -2, and -3 speed designations during tool selection, timing analysis, and production configuration. This product page combines device specifications, compatible same-package options, application guidance, and design-oriented comparison information. It is intended to help engineers select the correct Zynq-7000 device and verify package, temperature, speed, and software-tool implications before committing to a board design.

Permintaan RFG Kontak
XC7Z030-L2SBG485I - 125K Logic Cell Zynq SoC | AMD
XC7Z030-L2SBG485I

XC7Z030-L2SBG485I - 125K Logic Cell Zynq SoC | AMD

AMD XC7Z030-L2SBG485I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with 125K FPGA logic cells at an 800 MHz processor frequency in an FCBGA package measuring 19 x 19 mm. The device is manufactured using 28 nm technology and is identified with a nominal 1 V supply class in its published product listing. A Zynq-7000 system-on-chip is a programmable logic device with an integrated hard processor system. It sits within the hierarchy of FPGA and CPLD devices, combines a programmable logic fabric with an ARM processing subsystem, and provides a single-chip platform for hardware acceleration, control logic, networking, and embedded software. This integration can reduce the number of discrete devices required in a system while allowing designers to partition processing-intensive tasks between software and programmable logic. The XC7Z030 provides 125K logic cells and dual ARM Cortex-A9 MPCore processing with CoreSight support. Its 800 MHz operating frequency supports embedded control and application workloads, while the Kintex-7 logic fabric allows accelerators, interfaces, and real-time data paths to be implemented in hardware. The -2 speed designation identifies its performance grade within the Zynq-7000 ordering scheme, while the I suffix identifies the industrial-temperature product version. The SoC architecture is significant because the ARM processor and FPGA fabric communicate through a dedicated AXI interconnect rather than through a conventional external processor-to-FPGA bus. Software can control fabric-based hardware blocks, and deterministic logic can handle timing-sensitive functions outside the software execution path. The listed 28 nm process generation and 125K-cell fabric place the XC7Z030 between smaller Zynq devices and larger programmable-logic platforms. Typical uses include industrial image processing, factory automation, embedded vision, communications infrastructure, programmable logic controllers, and mixed processor-logic systems. A dual-core ARM subsystem can run operating-system-level software and network services, while the FPGA fabric can implement parallel datapaths, protocol handling, sensor acquisition, or hardware-assisted cryptography. The principal design consideration is board-level integration. The FCBGA package requires a carefully controlled PCB stack-up, power delivery network, decoupling network, and high-density escape routing. Designers should follow the AMD Zynq-7000 package and PCB guidance, including the package pinout files and DS191 device documentation, before assigning power, ground, clock, and high-speed interface pins. This product record combines the published device identity and architecture with verified package resources, order-code comparison guidance, and practical implementation considerations. It also distinguishes exact package and speed-grade variants so engineers can identify a candidate that can be evaluated for a board-level replacement rather than relying on family-name similarity alone.

Permintaan RFG Kontak
XC7Z035-1FBG676C Dual-Core Zynq SoC | AMD/Xilinx
XC7Z035-1FBG676C

XC7Z035-1FBG676C Dual-Core Zynq SoC | AMD/Xilinx

AMD/Xilinx XC7Z035-1FBG676C is a programmable system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug support and a Kintex-7 FPGA fabric. The device provides 275K logic cells, operates at 667 MHz, and is packaged in a 676-pin FCBGA measuring 27 x 27 mm. Its integrated architecture combines hardware programmable logic with a general-purpose processor subsystem. A Zynq-7000 SoC is a heterogeneous programmable platform that integrates an ARM Cortex-A9-based processing system and Xilinx FPGA fabric on one semiconductor device. Within the product hierarchy, it is a system-on-chip, embedded processor FPGA, programmable logic device, and semiconductor. This integration can reduce the number of discrete components required when a design needs both application processing and flexible hardware acceleration. The XC7Z035 portion provides 275K logic cells for programmable interfaces, control logic, signal processing, and accelerator datapaths. Its dual-core ARM Cortex-A9 MPCore subsystem operates at 667 MHz and includes CoreSight debug capabilities. The 676-FCBGA package supports high-density pinout requirements for the Zynq-7000 family and is associated with a 27 x 27 mm body size in the product documentation. AMD documents the XC7Z035 in the Zynq-7000 SoC data sheet covering the XC7Z030, XC7Z035, and XC7Z045 families. A separate package placement document addresses XC7Z35-FBG676 and FFG676 devices, while the official package-pinout resource provides package files for design verification. These documents are important because processor performance alone does not establish PCB compatibility; speed grade, package marking, temperature designation, and ball assignments must also be checked. Typical uses include industrial control, machine vision, communications infrastructure, networked equipment, test and measurement systems, and embedded applications that combine Linux-capable processing with programmable hardware. The processor subsystem is suitable for operating systems, networking stacks, and control software, while the FPGA fabric can implement deterministic parallel datapaths, custom interfaces, or hardware-assisted acceleration. PCB design should preserve the 676-FCBGA land pattern, power and ground distribution, and decoupling arrangement defined by the AMD documentation. Because the device combines a processor system with programmable I/O, careful separation of sensitive clock, transceiver, and high-speed interface routing is essential. Configuration storage, startup sequencing, bank-voltage constraints, and the selected design tools must also be validated before production release. This page combines the verified device identity, package details, family documentation, pricing evidence, application guidance, and same-package migration options into an engineering-focused reference. It also highlights the verification steps needed when considering an FPGA or SoC replacement, where package compatibility alone does not guarantee identical software timing, power behavior, configuration, or lifecycle requirements.

Permintaan RFG Kontak
XC7Z035-1FBG676I - 667MHz Zynq SoC FPGA | AMD
XC7Z035-1FBG676I

XC7Z035-1FBG676I - 667MHz Zynq SoC FPGA | AMD

The AMD XC7Z035-1FBG676I is a Zynq-7000 adaptive system-on-chip integrating a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug, a Kintex-7 FPGA fabric, 275,000 logic cells, and a 667 MHz processor clock in a 676-FCBGA package measuring 27 x 27 mm. Its operating temperature range is -40°C to +100°C, and the industrial suffix identifies a temperature-qualified assembly for demanding embedded and industrial systems. A Zynq-7000 SoC belongs to the FPGA & CPLD hierarchy and combines a hardware adaptive SoC architecture with programmable logic. Unlike a standalone microcontroller, the device allows ARM software and FPGA fabric to operate within one chip while communicating through dedicated interfaces. This heterogeneous architecture supports concurrent control processing, hardware data processing, signal acquisition, communications, and real-time decision-making without requiring separate processor and FPGA packages. The device provides approximately 275,000 logic cells and 250 I/O in its largest configuration. A 667 MHz Cortex-A9 processor supports the embedded software side, while the Kintex-7 fabric handles parallel logic, high-speed interface functions, protocol acceleration, and timing-sensitive workloads. CoreSight provides integrated visibility for debugging the processing system, and the Zynq architecture supports a combination of Linux, real-time operating systems, bare-metal firmware, and hardware-assisted pipelines. The XC7Z035-1FBG676I uses a 676-ball flip-chip BGA package, making it appropriate for dense multilayer PCB layouts with high-density escape routing and controlled impedance requirements. Its industrial temperature qualification covers applications operating from -40°C through +100°C. The package combines the Arm processing system, programmable logic, memory interfaces, and general-purpose I/O in a single 27 x 27 mm component. Typical uses include industrial machine vision, test and measurement equipment, industrial networking, embedded video processing, communications infrastructure, and control systems that benefit from parallel hardware acceleration. Designers can assign time-critical filtering, protocol conversion, data acquisition, or interface bridging to the programmable logic while the Arm cores execute control software, operating systems, communications stacks, and supervisory functions. PCB implementation requires careful BGA escape routing, power and ground-plane design, decoupling, thermal management, and differential-pair routing. Use the AMD Zynq-7000 package pinout files referenced in the design documentation to assign every ball correctly. Confirm the selected DDR memory interface, transceivers, bank voltages, configuration method, and clocking requirements before schematic capture. This page combines the confirmed device identity, package, operating-temperature, lifecycle, and environmental information with practical implementation guidance. It also identifies same-footprint Zynq-7000 ordering options for engineering comparison while distinguishing speed, temperature, and extended-temperature qualification changes that must be checked before substitution.

Permintaan RFG Kontak
XC7Z035-1FFG676C - 667MHz Dual Cortex-A9 SoC FPGA | AMD
XC7Z035-1FFG676C

XC7Z035-1FFG676C - 667MHz Dual Cortex-A9 SoC FPGA | AMD

The AMD XC7Z035-1FFG676C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor with 275K logic cells of FPGA fabric in a 676-ball FCBGA package measuring 27 x 27 mm. The integrated processor subsystem operates at 667 MHz, while the programmable logic section supplies parallel hardware acceleration, flexible interfaces, and dedicated processing resources within one device. A Zynq-7000 SoC belongs to the system-on-chip family, combining a hard microcontroller subsystem with programmable FPGA logic. This integration removes the need to place a separate processor and FPGA on the same board, while preserving software programmability through the Arm Cortex-A9 platform and hardware customization through Kintex-7 FPGA resources. The resulting architecture can accelerate data movement, filtering, encryption, image processing, and interface conversion without relying exclusively on sequential software execution. Key characteristics of the XC7Z035 include two Cortex-A9 processor cores, 667 MHz clocking, 275K logic cells, and support for CoreSight-based debug and trace visibility. The -1 device designation identifies the associated speed grade within the Zynq-7000 ordering system. The FFG676 designation identifies the 676-ball FCBGA package used by this ordering variant, with a stated package size of 27 x 27 mm. The programmable architecture makes this device suitable for industrial control, machine vision, network appliances, test equipment, communications infrastructure, and embedded edge systems. Designers can allocate deterministic tasks to FPGA logic while the operating system executes higher-level control, networking, or user-interface functions on the processor subsystem. Peripheral interfaces can therefore be implemented with predictable timing rather than depending entirely on interrupt-driven software servicing. Board design requires careful allocation of power, ground, high-speed transceiver, clocking, and processor debug resources. Use the AMD package-placement diagrams and Zynq-7000 data sheet to assign every ball before routing PCB traces. The 676-ball package also demands a fine-pitch PCB layout with controlled impedance and appropriate power-delivery networks. Selection should begin with the required processor software image, FPGA utilization, transceiver count, peripheral mix, operating temperature, and lifecycle expectations. Confirm that the chosen ordering variant satisfies all mechanical, electrical, and software requirements before committing the footprint. This page combines verified ordering details, package information, practical design guidance, and a structured comparison of same-family alternatives.

Permintaan RFG Kontak
XC7Z035-1FFG676I - 275K Logic Cell Zynq SoC | AMD
XC7Z035-1FFG676I

XC7Z035-1FFG676I - 275K Logic Cell Zynq SoC | AMD

The AMD XC7Z035-1FFG676I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor with 275,000 FPGA logic cells in a 676-ball FCBGA package measuring 27 x 27 mm. The processor operates at 667 MHz, while the programmable logic fabric supports hardware acceleration, parallel processing, custom interfaces, and high-speed signal processing. The device is positioned for industrial, networking, video, communications, and embedded control systems requiring an integrated ARM processor and FPGA architecture. A system-on-chip integrates programmable logic and a processing system within one device. In the Zynq-7000 hierarchy, this component is a Zynq SoC combining an Arm Cortex-A9 application-processing subsystem with a Kintex-7 FPGA fabric. This integration reduces the number of discrete components needed for a control-plane processor and programmable accelerator, while retaining the flexibility of hardware data paths and software-controlled management. The XC7Z035-1FFG676I provides 275K logic cells, a dual-core Arm Cortex-A9 MPCore configuration, CoreSight debug capability, and a maximum listed processor frequency of 667 MHz. Integrated security and management features include AES encryption support, watchdog timeout detection, and an integrated temperature sensor. The industrial-temperature suffix identifies the -40°C to +100°C operating range for demanding embedded and industrial equipment. The architecture separates software-intensive control functions from time-critical datapaths. ARM software can manage communication stacks, control sequencing, and application logic, while FPGA fabric can accelerate image processing, protocol conversion, data filtering, or fixed-function parallel pipelines. The 676-ball FCBGA package supports dense interconnect to external memory and high-speed peripherals, but its ball pitch, power delivery, and thermal requirements make careful PCB planning essential. Typical uses include industrial machine vision, video capture and processing, industrial networking, secure embedded gateways, communications infrastructure, and high-performance embedded control. In these applications, the dual Cortex-A9 cores handle control software while Kintex-7 logic accelerates parallel data acquisition or media processing. The integrated watchdog and AES support are useful for resilient industrial and security-sensitive systems. The primary PCB considerations are power-rail sequencing, multilayer decoupling, controlled-impedance routing, thermal management, and BGA assembly yield. Validate the complete power-up and power-down sequence, maintain continuous return paths beneath high-speed routes, and provide adequate copper and cooling for the device's industrial-temperature operation. This product page combines the verified device identity, package information, temperature range, security functions, comparison guidance, and engineering-oriented selection notes to help engineers evaluate the XC7Z035-1FFG676I for embedded FPGA-assisted processing designs.

Permintaan RFG Kontak
XC7Z035-1FFG900C - 275K Logic Cell Zynq SoC | AMD
XC7Z035-1FFG900C

XC7Z035-1FFG900C - 275K Logic Cell Zynq SoC | AMD

The AMD XC7Z035-1FFG900C is a Zynq-7000 programmable SoC integrating a dual-core Arm Cortex-A9 MPCore processing system with a Kintex-7 FPGA fabric, 275K logic cells, and a 667 MHz processor operating frequency in a 900-FCBGA package measuring 31 mm by 31 mm. The device combines hard-processor peripherals, programmable logic, high-speed memory interfaces, and extensive general-purpose I/O within one heterogeneous system-on-chip. A Zynq SoC is a programmable system-on-chip that combines a hardwired Arm Cortex-A9 processing system with an FPGA fabric in the same package. This product hierarchy—Zynq SoC, FPGA and CPLD, programmable logic, integrated circuit, and semiconductor—places the XC7Z035 at the intersection of embedded software execution and hardware-accelerated logic. The integrated architecture can reduce interconnects between the processor and programmable logic compared with a separate processor and FPGA design. Key device characteristics include dual Arm Cortex-A9 MPCore cores, 275K FPGA logic cells, a 667 MHz operating frequency, a 900-FCBGA package, and 362 I/O according to the product listing data. The processing system includes on-chip memory and interfaces for external memory, while the Kintex-7 fabric supports hardware data processing, control logic, interface bridging, and accelerator functions. The Zynq-7000 architecture supports software control through the Arm Cortex-A9 subsystem and programmable hardware through the FPGA fabric. The 31 mm by 31 mm FCBGA-900 construction provides a large ball array for high-density connectivity. Design implementation must account for the fine package pitch, multilayer PCB requirements, high-speed routing rules, power and ground distribution, and thermal performance. Because the device combines thousands of programmable logic elements with a complex processor subsystem, bitstream generation, embedded software configuration, memory-interface design, and signal-integrity verification form one integrated engineering workflow. Typical applications include industrial automation, networked control systems, embedded vision, communications equipment, data acquisition, and high-performance embedded processing with FPGA-assisted acceleration. The programmable logic can implement parallel data paths, protocol interfaces, preprocessing pipelines, or custom accelerators while the Arm subsystem executes operating-system-level software, control logic, and network services. A critical implementation requirement is to follow the AMD package pinout and PCB guidelines for the FFG900 package. Use the official package pinout files and Zynq-7000 documentation to assign power, ground, configuration, memory, high-speed transceiver, and I/O balls. Validate multilayer stack-up, ball escape routing, decoupling, clocking, and thermal design before fabrication. This product page organizes the exact XC7Z035-1FFG900C identity, verified package and logic specifications, same-family replacement options, pricing status, and application guidance. It also emphasizes the engineering checks required when replacing a commercial-temperature FCBGA-900 Zynq device without changing the PCB footprint.

Permintaan RFG Kontak
XC7Z035-1FFG900I - 275K Logic Cell Zynq-7000 SoC | AMD
XC7Z035-1FFG900I

XC7Z035-1FFG900I - 275K Logic Cell Zynq-7000 SoC | AMD

The AMD XC7Z035-1FFG900I is a Zynq-7000 adaptive SoC integrating a dual-core ARM Cortex-A9 processor with a Kintex-7 FPGA in a 900-FCBGA package. The device provides 275,000 logic cells, a 667 MHz Cortex-A9 processor, 18,022 Kb of block RAM, and 900 DSP slices in a 31 x 31 mm industrial-grade package. A Zynq adaptive SoC combines a programmable logic subsystem with a hard processor subsystem on one silicon device. In the broader semiconductor hierarchy, it belongs to the SoC category, combining a microprocessor, FPGA fabric, memory controllers, programmable I/O, and dedicated processing resources. This integration allows control logic, application processing, video acceleration, and signal processing to operate within one device and package. The principal features of the XC7Z035-1FFG900I include two ARM Cortex-A9 cores, CoreSight debug support, 275,000 FPGA logic cells, 18,022 Kb of block RAM, and 900 DSP slices. The 900-FCBGA package offers a large, fine-pitch interconnect for demanding designs requiring extensive parallel processing, high-speed memory interfaces, or multiple programmable I/O resources. The device is manufactured on a 28 nm process and operates from a 1 V core supply. Its heterogeneous architecture places programmable fabric and dedicated DSP blocks beside the ARM processing system. Software developers can execute an operating system or bare-metal code on the Cortex-A9 subsystem while FPGA fabric implements accelerators, interfaces, protocol logic, and real-time datapaths. Typical uses include industrial machine vision, networked video processing, communications infrastructure, high-performance embedded control, software-defined radio, and edge-AI systems. The dual Cortex-A9 configuration supports concurrent application tasks, while 900 DSP slices accelerate filtering, transforms, and other mathematically intensive operations. The large FPGA fabric is particularly useful when a fixed-function processor or discrete FPGA combination would consume excessive board area. Design with the complete 900-ball package rather than assuming a simpler pin-compatible footprint. Ball assignment, power rails, high-speed routing, decoupling, and exposed-pad or thermal requirements must follow the AMD package documentation and reference design. The 1 speed grade and industrial temperature designation should be considered during timing closure, especially where processor-to-FPGA interfaces or memory interfaces operate at high data rates. This product page combines the verified device identity, package characteristics, programmable resources, and processor architecture with practical replacement, comparison, and design guidance. It distinguishes genuine package-compatible options from devices that use different Zynq package suffixes and therefore require a PCB-level redesign.

Permintaan RFG Kontak
XC7Z035-2FBG676E - 275K Zynq SoC, 800MHz | AMD
XC7Z035-2FBG676E

XC7Z035-2FBG676E - 275K Zynq SoC, 800MHz | AMD

The AMD XC7Z035-2FBG676E is a Zynq-7000 Kintex-7 system-on-chip with a dual-core ARM Cortex-A9 MPCore processor, CoreSight debug support, 275K programmable logic cells, and an 800 MHz processor rating. It is packaged in a 676-ball FCBGA package measuring 27 x 27 mm and operates across the stated 0°C to +100°C range. A Zynq-7000 SoC is a heterogeneous programmable system-on-chip that combines a hard processor subsystem with FPGA fabric in one device. The ARM Cortex-A9 subsystem executes operating-system-level software, while the Kintex-7 programmable logic implements parallel data paths, custom accelerators, interfaces, and signal processing. This integration can reduce component count and avoid data transfers between a separate processor and FPGA. The XC7Z035 offers 275K logic cells and 800 MHz performance in the listed configuration. Integrated features include AES encryption support, a watchdog timeout detector, and an integrated temperature sensor. The processor subsystem includes on-chip memory, external memory interfaces, and a broad collection of peripheral connectivity interfaces, while CoreSight provides integrated debug and trace visibility for embedded development. Its 676-FCBGA package supports high-density interconnect through 250 I/O, making the device appropriate for industrial control, networking, communications, image processing, and embedded edge systems. The integration of ARM software execution with FPGA fabric allows designers to place time-critical functions in programmable logic while retaining operating-system support for networking, control, storage, and user-facing functions. The processor, fabric, memory interfaces, and peripherals share a single programmable platform. A typical design would run board-support software on the dual Cortex-A9 processors and implement time-critical interfaces or accelerators in the Kintex-7 fabric. DDR memory, flash storage, transceivers, clocking, and power rails remain external system dependencies. The 27 x 27 mm BGA package also requires careful PCB escape routing, power delivery, thermal planning, and assembly-process control. Engineers should verify all signal assignments against the AMD DS190 device documentation before layout because the complete 676-ball pin map is too large to reproduce safely without the manufacturer package diagrams. Differential pairs, supply rails, high-speed memory connections, and configuration pins require exact pin, voltage, and impedance assignments. Power sequencing and thermal performance should be validated for the final board and enclosure. This product page consolidates the verified device identity, package information, search-driven alternatives, parameter comparisons, and engineering guidance into a design-focused reference. It supports early part selection while directing readers to the manufacturer documentation for authoritative pin-level implementation details.

Permintaan RFG Kontak
XC7Z035-2FBG676I Dual Cortex-A9 800MHz 676-FCBGA | AMD
XC7Z035-2FBG676I

XC7Z035-2FBG676I Dual Cortex-A9 800MHz 676-FCBGA | AMD

The AMD XC7Z035-2FBG676I is a Zynq-7000 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system with a Kintex-7 FPGA fabric, rated at 800 MHz and offered in a 676-FCBGA package measuring 27 x 27 mm. It contains 275K logic cells and integrates programmable logic, processors, memory interfaces, and high-speed connectivity in one device. A Zynq-7000 All Programmable SoC is a heterogeneous system-on-chip that combines an FPGA with one or more ARM processors. The FPGA fabric supports parallel hardware processing, while the Cortex-A9 subsystem executes operating-system, networking, control, and application software. This integration reduces the component count and board area compared with separate FPGA and processor designs while retaining programmable hardware parallelism. Key features include two ARM Cortex-A9 MPCore processors, 275K FPGA logic cells, an 800 MHz processor rating, and a 676-ball FCBGA package. The integrated architecture is suitable for industrial control, machine vision, communications gateways, embedded computing, and test equipment. Hardware accelerators can execute repetitive filtering, protocol handling, image processing, or data movement concurrently with software tasks. The device combines programmable logic with a coherent processor-centric software environment. Peripheral connectivity, memory interfaces, and programmable logic can be tailored around a specific workload, reducing external component requirements and data-transfer overhead. The -2 performance grade and industrial-temperature suffix identify a grade intended for applications requiring stronger performance and extended operating conditions than the -1 grade. Typical implementations use the Cortex-A9 subsystem for networking, device management, and user applications, while FPGA logic accelerates video pipelines, sensor fusion, protocol conversion, or high-speed interfaces. The same SoC can support control-only designs, processor-led gateways, or mixed workloads where software and hardware tasks operate concurrently. PCB implementation requires careful attention to the large BGA escape-routing strategy, power and ground distribution, decoupling, and thermal management. The Zynq-7000 package-pinout resources, identified by AMD as supporting package files in TXT and CSV formats, should be used with the selected device speed and temperature grade during symbol creation and PCB validation. This product page combines the device architecture and ordering information with package-aware alternatives, comparison criteria, and application guidance. It is intended to help engineers determine whether the XC7Z035-2FBG676I fits a design before moving to detailed power, thermal, timing, and PCB implementation checks.

Permintaan RFG Kontak
XC7Z035-2FFG676E - 275K Logic Cell Zynq SoC | AMD
XC7Z035-2FFG676E

XC7Z035-2FFG676E - 275K Logic Cell Zynq SoC | AMD

The AMD XC7Z035-2FFG676E is a Zynq-7000 Kintex-7 FPGA system-on-chip with 275K logic cells, a dual-core Arm Cortex-A9 processing system operating at 800 MHz, and CoreSight debug support, housed in a 676-pin FCBGA package measuring 27 x 27 mm. It combines programmable logic with an embedded processing system in one device. A Zynq system-on-chip is an FPGA and SoC architecture that combines a hardwired ARM processing system with programmable logic fabric. The processing system executes operating-system-level software and controls system tasks, while the programmable logic implements parallel hardware, custom interfaces, signal processing, or accelerator functions. This division allows software and hardware responsibilities to be partitioned efficiently within one silicon device. The XC7Z035 provides 275K logic cells and an 800 MHz dual-core Cortex-A9 configuration. Its Zynq-7000 platform integrates processing, programmable logic, memory interfaces, and programmable peripherals on one package. The device also includes CoreSight technology for debug and trace-related functions, making the SoC suitable for complex embedded control systems that benefit from deterministic hardware acceleration. The -2 portion of the ordering code identifies speed grade 2, while the E suffix identifies the extended-temperature variant. The FFG676 package provides 676 ball-grid-array contacts in a 27 x 27 mm footprint. This high-pin-count package supports extensive connectivity between the processing system, programmable logic, external memory, and board-level peripherals, but it also requires careful ball assignment, power planning, and multilayer PCB layout. Typical uses include industrial automation, embedded vision, communications equipment, test and measurement, and networked control systems. In these applications, the Cortex-A9 cores can run control software or an operating system while the Kintex-7 programmable logic accelerates data acquisition, signal processing, protocol handling, or other parallel workloads. The architecture is particularly useful when designers want a compact embedded system with fewer inter-chip interfaces than a separate processor and FPGA. The principal design consideration is the complexity of a 676-pin FCBGA package. Power, ground, decoupling, high-speed routing, thermal management, and manufacturing capability must be planned before schematic capture. Differential interfaces and processor-to-memory connections require exact reference-design stackups and routing guidance from the AMD Zynq-7000 documentation. This page combines the verified device identity, package information, ordering-code details, comparison data, and practical implementation guidance into a compact engineering reference for evaluating the XC7Z035-2FFG676E.

Permintaan RFG Kontak
XC7Z035-2FFG676I - Zynq-7000 SoC, 275K LC, 800MHz | AMD
XC7Z035-2FFG676I

XC7Z035-2FFG676I - Zynq-7000 SoC, 275K LC, 800MHz | AMD

The AMD (Xilinx) XC7Z035-2FFG676I is a Zynq-7000 All Programmable System-on-Chip (SoC) combining a dual-core ARM Cortex-A9 MPCore processing system running at 800 MHz with a Kintex-7 class FPGA fabric of 275K logic cells, housed in a 676-ball FCBGA (27x27 mm) industrial-grade package. A Zynq-7000 SoC is a class of programmable system-on-chip devices that integrate a hardwired processor system (PS) with programmable logic (PL) on a single die. Unlike a standalone FPGA or a standalone microprocessor, a SoC FPGA allows software running on the ARM cores and hardware accelerators in the fabric to communicate over high-bandwidth on-chip AXI interconnect, making the device family a cornerstone of modern embedded processing and adaptive computing hierarchies. Key features of the XC7Z035 include the mid-range 275K logic cell fabric, a -2 speed grade, and industrial temperature screening (the I suffix, typically -40C to +100C junction), making it suitable for harsh-environment deployments. The hard processor system offloads control-plane software while the fabric absorbs data-plane acceleration, math, and custom I/O. Architecturally, the device pairs the ARM Cortex-A9 NEON/FPU-enabled cores with CoreSight debug, caches, on-chip memory, and a rich set of PS peripherals, bonded to Kintex-7-based programmable logic with DSP slices, block RAM, and high-speed serial transceivers. AXI ports bridge the two domains with low latency. Typical applications include industrial automation and motor control, aerospace and defense processing, software-defined radio, video and image processing pipelines, and network packet processing where a soft processor would be too slow and a discrete CPU+FPGA pair too costly. When designing with this device, plan power sequencing between VCCINT, VCCAUX, and PS rails, and select a Vivado device name matching the industrial speed-grade variant to avoid implementation errors. This page synthesizes distributor pricing, verified same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
XC7Z035-2FFG900E - Dual-Core Cortex-A9 Zynq SoC | AMD
XC7Z035-2FFG900E

XC7Z035-2FFG900E - Dual-Core Cortex-A9 Zynq SoC | AMD

The AMD XC7Z035-2FFG900E is a Zynq-7000 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor operating at 800 MHz with CoreSight debug capability and a Kintex-7 FPGA fabric containing 275,000 logic cells. The device is packaged in a 900-ball FCBGA measuring 31 x 31 mm and supports extensive connectivity including CAN bus, Ethernet, I2C, SPI, UART/USART, USB OTG, MMC/SD/SDIO, and EBI/EMI. A Zynq system-on-chip is a heterogeneous programmable device that combines a hard microcontroller or microprocessor subsystem with programmable FPGA logic in one package. The processor subsystem executes operating-system software, controls external memory and peripherals, and communicates with software-defined hardware through memory-mapped interfaces. The FPGA fabric implements parallel datapaths, interfaces, protocol engines, image processing, and other hardware functions that would otherwise require separate devices. The XC7Z035 provides 275K logic cells and an 800 MHz processor core, giving designers a useful balance between software flexibility and hardware throughput. Its integrated Cortex-A9 subsystem supports the Zynq-7000 programmable logic environment, while CoreSight provides debug and trace visibility. The broad peripheral set reduces the need for discrete interface controllers when the design uses standard communication protocols. The XC7Z035 belongs to the Kintex-7-based portion of the Zynq-7000 family. This device combines processor-centric control with FPGA-based acceleration in one 900-FCBGA package. The FFG900 package offers 362 I/O according to the product listing, enabling high-density board-level integration while requiring careful power, ball-grid, and thermal planning. Typical applications include industrial control, machine vision, industrial networking, camera and image-processing systems, communications infrastructure, and embedded data acquisition. In these systems, the Arm processor can manage control software and network stacks while FPGA logic accelerates filtering, protocol conversion, sensor capture, or other timing-sensitive operations. A new design must account for the FCBGA-900 footprint, multilayer-board requirements, high-speed memory routing, power sequencing, and heat removal. Designers should also confirm the required Vivado toolchain, board-support packages, processor configuration method, and peripheral assignments against their system architecture before schematic capture. This product page combines the verified XC7Z035-2FFG900E identity, package, processor, FPGA, and interface information with package-aware alternatives and implementation guidance. It also highlights the principal design distinction: FPGA resource size, processor speed, temperature grade, and qualification suffix must be reviewed together when determining whether a related device is a true drop-in replacement.

Permintaan RFG Kontak
XC7Z035-2FFG900I - 275K Logic Cell Zynq SoC | AMD
XC7Z035-2FFG900I

XC7Z035-2FFG900I - 275K Logic Cell Zynq SoC | AMD

The AMD XC7Z035-2FFG900I is a Zynq-7000 Kintex-7 system-on-chip with 275,000 programmable logic cells, a dual-core ARM Cortex-A9 MPCore processor, and an 800 MHz processor speed. The device combines programmable logic, ARM-based application processing, CoreSight debug support, dedicated DSP resources, and integrated memory controllers in a 900-FCBGA package measuring 31 x 31 mm. Its -2 speed grade and industrial temperature designation support demanding embedded, communications, industrial-control, and signal-processing systems. A Zynq-7000 SoC is an all-programmable system-on-chip that integrates a processing system and FPGA fabric on one silicon device. The ARM Cortex-A9 processing system executes operating systems, applications, and control software, while the Kintex-7 programmable logic implements parallel data paths, hardware accelerators, protocol handling, and custom peripherals. This heterogeneous architecture replaces a separate processor-plus-FPGA design with one device that supports software-controlled hardware acceleration. The XC7Z035 provides 275K logic cells and 900 DSP slices, making it suitable for applications that combine sequential control with high-throughput parallel processing. It also includes 18,022 Kb of block RAM according to the product listing. The dual-core Cortex-A9 subsystem operates at up to 800 MHz, enabling Linux, real-time operating systems, networking stacks, and sophisticated control algorithms while the FPGA fabric handles latency-sensitive data acquisition and filtering. The programmable logic and processing system communicate through dedicated interfaces, allowing designers to partition a design between software and hardware. Parallel lookup tables, DSP pipelines, block RAM, and high-speed serial or parallel interfaces can accelerate operations that would burden the processor. This division of labor is particularly effective in image processing, industrial vision, communications infrastructure, control systems, and network equipment requiring deterministic data movement. Typical deployments include industrial Ethernet gateways, high-speed data acquisition, machine vision, test and measurement equipment, software-defined radio, embedded control, and communications infrastructure. The 900-ball package provides extensive I/O for high-pin-count board designs, but its size and ball pitch require a multilayer PCB, careful power delivery, and disciplined signal-integrity implementation. Design with the manufacturer pinout files and Zynq-7000 documentation before assigning the 900 package balls. Decoupling networks, high-speed differential routing, clocking, MGT connectivity, processor boot storage, DDR memory, and programming interfaces must follow the relevant AMD reference designs. The large BGA also requires thermal analysis based on actual power consumption and the intended ambient temperature. This page consolidates the device identity, documented resource counts, package information, same-package alternatives, comparison parameters, and practical PCB guidance. It also identifies commercial questions for the Request a Quote workflow and separates package-compatible options from devices that require a different footprint.

Permintaan RFG Kontak
XC7Z035-3FBG676E - 275K Cell Zynq SoC | AMD | Industrial
XC7Z035-3FBG676E

XC7Z035-3FBG676E - 275K Cell Zynq SoC | AMD | Industrial

The AMD XC7Z035-3FBG676E is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor at 1 GHz with 275,000 FPGA logic cells in a 676-ball FCBGA package measuring 27 mm by 27 mm. It integrates programmable logic, ARM Cortex-A9 processing, memory controllers, and fixed-function peripherals into one high-performance mixed-signal SoC. A Zynq-7000 SoC is a heterogeneous programmable device in which an ARM microprocessor subsystem operates alongside FPGA fabric. This device family belongs to the broader FPGA and system-on-chip hierarchy, allowing hardware designers to implement parallel pipelines, custom interfaces, video processing, control logic, and software-driven control functions in a single package rather than combining a separate processor and FPGA. Key characteristics include 275,000 logic cells, dual ARM Cortex-A9 MPCore processors, CoreSight debug support, and a maximum processor frequency of 1 GHz. The 28 nm implementation supports both hard real-time processing and programmable-logic acceleration. Its 676-ball FCBGA package provides a dense interface for high-speed memory, networking, display, storage, and external data acquisition. The architecture is particularly useful when an application benefits from combining Linux-capable application processing with deterministic parallel hardware. Software can control the system and manage data movement, while FPGA logic can accelerate filtering, codecs, image processing, protocol handling, or custom interface tasks. Compared with a microcontroller alone, the integrated fabric removes much of the external glue logic normally required for high-throughput data paths. Typical uses include industrial machine vision, factory automation, networked video processing, test and measurement systems, communications infrastructure, and embedded control platforms. The dual-core processor can partition control software from monitoring or data-processing workloads, while programmable logic interfaces directly to sensors, converters, memories, and high-speed external peripherals. Board design requires careful attention to power rails, high-speed routing, thermal management, and BGA assembly. Use the AMD pinout, package, and power-guidance documentation to assign power, ground, configuration, and I/O balls. A 676-ball BGA also requires a multilayer PCB with controlled-impedance routing, via-in-pad or via-fanout strategies, and assembly processes capable of handling the package's ball pitch and thermal requirements.

Permintaan RFG Kontak
XC7Z035-L2FBG676I Zynq-7000 SoC FPGA | AMD
XC7Z035-L2FBG676I

XC7Z035-L2FBG676I Zynq-7000 SoC FPGA | AMD

The AMD XC7Z035-L2FBG676I is a Zynq-7000 system-on-chip that combines a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug technology and Kintex-7-class programmable logic in one device. It provides 275,000 logic cells, an 800 MHz processor operating frequency, and a 676-ball FCBGA package measuring 27 x 27 mm. The -L2 speed designation places the device in the mid-performance grade, while the industrial temperature marking supports operation from -40 °C to +100 °C. A Zynq-7000 SoC belongs to the FPGA > programmable logic system-on-chip hierarchy. Unlike a conventional microcontroller paired with a separate FPGA, this device combines a hard ARM processor system with programmable fabric, dedicated memory controllers, general-purpose I/O, and integrated security and debug functions. The Cortex-A9 side executes operating-system-level software and application code, while the programmable logic side accelerates parallel algorithms, interfaces, data acquisition, and protocol processing. Key device characteristics include dual ARM Cortex-A9 cores, 800 MHz performance, 275K logic cells, and a 28 nm programmable-logic process technology. The manufacturer documentation identifies a nominal 1 V device and a 12-bit feature within the device family listing. CoreSight support provides integrated debug visibility, while the 676-ball package exposes the wide bank of high-performance and general-purpose I/O required by processor-centric embedded systems. Typical applications include industrial control and automation, embedded vision, communications infrastructure, test and measurement, and high-performance embedded processing. The programmable logic can implement deterministic data pipelines or custom peripherals while the ARM cores manage control software, networking stacks, and real-time tasks. These designs must be partition-aware: software running on the processing system must coordinate with hardware implemented in the programmable logic array. PCB implementation requires careful planning for the 676-ball FCBGA, power delivery, decoupling, high-speed routing, and thermal management. Use the AMD package pinout files and the Zynq-7000 device documentation when assigning every ball and escape-routing the power, ground, configuration, and high-speed interfaces. Confirm the selected memory interface, I/O voltage, and board-level clocking against the exact speed-grade and temperature-grade ordering code before release. This page combines device identification, verified technical attributes, drop-in ordering-code comparisons, application guidance, and design notes that help engineers evaluate the XC7Z035-L2FBG676I for a new Zynq-7000 board or an existing 676-ball design.

Permintaan RFG Kontak
XC7Z035-L2FFG676I Dual Cortex-A9 Zynq SoC | AMD
XC7Z035-L2FFG676I

XC7Z035-L2FFG676I Dual Cortex-A9 Zynq SoC | AMD

The AMD XC7Z035-L2FFG676I is a heterogeneous Zynq-7000 SoC FPGA integrating a dual-core ARM Cortex-A9 processor with 275,000 Kintex-7 FPGA logic cells in a 676-ball FCBGA package measuring 27 x 27 mm. The processor operates at 800 MHz, while the programmable logic fabric supports systems requiring hardware acceleration, parallel processing, and dedicated interfaces within one device. A system-on-chip, or SoC, combines a hard processor subsystem with programmable logic in a single integrated circuit. The XC7Z035 belongs to the Zynq-7000 family and the broader embedded FPGA category. Its ARM Cortex-A9 subsystem handles sequential software tasks, while its Kintex-7 fabric implements data paths, protocol engines, control logic, and other hardware-specific functions. This hierarchy places the device above conventional microcontrollers and fixed-function interface chips while avoiding the software overhead of a separate processor-plus-FPGA implementation. Principal features include a dual ARM Cortex-A9 MPCore configuration with CoreSight debug support, 275,000 FPGA logic cells, an 800 MHz processor rating, and a 676-FCBGA surface-mount package. The integrated architecture allows processor-to-programmable-logic communication through dedicated interfaces, reducing board-level interconnect requirements. Compared with a discrete MCU and FPGA design, consolidation can simplify PCB routing, reduce component count, and shorten development cycles. The XC7Z035-L2FFG676I is suitable for industrial networking, embedded vision, control systems, communications equipment, and data-acquisition systems. Its 27 x 27 mm FCBGA package requires a dense land pattern, careful power delivery, and thermal design that accounts for both processor and FPGA power. Design engineers should also plan high-speed memory and programmable-logic routing using the AMD package pinout files referenced in UG865. For connected equipment, the device can combine Linux or real-time operating-system software with dedicated FPGA logic for deterministic data processing. For image and signal-processing systems, parallel pipelines can accelerate filtering, compression, protocol handling, or sensor-data transfer while the ARM cores manage control flow and external networking. The primary design considerations are BGA layout, power-rail sequencing, decoupling, thermal management, and high-speed signal integrity. Maintain short return paths for supply and ground connections, provide effective local capacitance at each rail, and validate the complete stack-up and power-delivery network against the applicable AMD implementation guidance. This page also distinguishes same-package speed, temperature, and package-code alternatives so engineers can assess drop-in suitability without overlooking device qualification or Vivado target differences. The XC7Z035-L2FFG676I combines reusable ARM processing, CoreSight visibility, and programmable FPGA logic in one 27 x 27 mm FCBGA device. Its 275,000 logic cells and 800 MHz processor make it a configurable platform for embedded control, communications, industrial imaging, and high-throughput data-processing systems where integration, deterministic hardware acceleration, and design flexibility are important.

Permintaan RFG Kontak
XC7Z045-1FBG676C - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z045-1FBG676C

XC7Z045-1FBG676C - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z045-1FBG676C is a Zynq-7000 Kintex-7 FPGA system-on-chip with 350K logic cells, a dual-core Arm Cortex-A9 processor, CoreSight debug support, and a 667 MHz processor operating frequency. It is packaged in a 676-ball FCBGA measuring 27 x 27 mm. This combination integrates programmable logic with an embedded application processor and CoreSight in one device. A Zynq-7000 system-on-chip is a programmable SoC combining a hard processor subsystem with FPGA fabric. Within the product hierarchy, it sits below FPGA and SoC devices, above Arm Cortex-A9-based programmable logic platforms, and within the broader semiconductor and embedded-computing categories. The processor executes operating-system and application software while the FPGA fabric implements parallel data paths, custom interfaces, accelerators, and real-time logic. The XC7Z045 provides 350K logic cells and a 667 MHz dual-core Arm Cortex-A9 configuration. Its 676-FCBGA package provides 676 terminals, measures 27 x 27 mm, and has a maximum seated height of 2.54 mm. The Ball termination and square package shape are identified in the product listing, while the surface-mount construction supports compact embedded-system designs. The integration of programmable logic with two Arm Cortex-A9 cores allows designers to divide a design between software-controlled sequential processing and hardware-level parallel processing. CoreSight support provides integrated debug visibility for the SoC. Because the processor and programmable logic share one package, the device can reduce interconnects and support high-bandwidth implementations requiring both control logic and dedicated hardware acceleration. Typical uses include industrial image processing, networked industrial control, communications infrastructure, test and measurement equipment, embedded vision, and high-performance embedded computing. The FPGA fabric is appropriate for deterministic datapaths and custom peripherals, while the Cortex-A9 subsystem supports control software, networking stacks, and application-level processing. The same dual-core architecture can also accelerate AES processing and other repetitive workloads through dedicated logic. Design planning must include the 676-ball BGA escape-routing strategy, power delivery across the processor and FPGA domains, thermal management, DDR memory implementation, and configuration-boot requirements. A completed PCB should be reviewed for via-in-pad compatibility, ball-pitch clearance, solder mask and paste design, and power-plane current distribution before the first assembly cycle. This page combines the verified device identity, package information, searchable family alternatives, application guidance, and engineering-focused replacement criteria to support faster component selection and PCB planning for Zynq-7000 designs.

Permintaan RFG Kontak
XC7Z045-1FBG676CES - 350K Zynq-7000 SoC | AMD
XC7Z045-1FBG676CES

XC7Z045-1FBG676CES - 350K Zynq-7000 SoC | AMD

The AMD XC7Z045-1FBG676CES is a Zynq-7000 system on chip combining a dual-core Arm Cortex-A9 processor with CoreSight debug support and Kintex-7 FPGA fabric in a 676-FCBGA package. The device provides 350,000 logic cells, operates the processor subsystem at 667 MHz, and supports 1.2 V and 3.3 V rails. A Zynq-7000 SoC is a programmable system-on-chip that integrates an Arm application processing unit with FPGA programmable logic in one device. This SoC hierarchy combines an FPGA, an embedded microprocessor subsystem, programmable input/output, memory interfaces, and dedicated hardware accelerators. That integration permits software-controlled hardware functions to share one device instead of occupying separate processors and FPGAs. The principal features of the XC7Z045 include 350,000 FPGA logic cells, a dual-core Arm Cortex-A9 MPCore configuration, CoreSight debugging, and a 676-pin FCBGA package measuring 27 x 27 mm. The -1 speed designation identifies the device speed grade, while the FBG package suffix identifies the package family and ball-grid arrangement used by the Zynq-7000 product line. Architecturally, the Arm Cortex-A9 cores provide a 32-bit Arm Thumb-2 processing environment for operating systems, control logic, networking stacks, and application software. The Kintex-7 FPGA fabric supports hardware pipelines, parallel interfaces, image processing, and other time-critical logic. CoreSight provides integrated debug and trace facilities, making the device suitable for systems requiring coordinated software and hardware observability. Typical applications include industrial machine vision, factory automation, networked control equipment, high-speed data acquisition, communications infrastructure, and embedded edge processing. The combination of 667 MHz Arm processing and 350,000 programmable logic cells is particularly useful when a control loop must interact directly with parallel sensors, high-throughput data paths, or custom hardware accelerators. Designers should preserve the package-specific power, ground, decoupling, and ball-escape requirements of the 676-FCBGA platform. The 1.2 V and 3.3 V rails require correct sequencing and sufficient decoupling, while high-speed interfaces demand controlled routing and return paths. PCB layout, power delivery, and thermal design must be validated together because the SoC combines many high-performance subsystems in one compact package. This page combines the verified device identity, package and performance characteristics, same-family drop-in alternatives, parameter comparisons, and practical design guidance into one engineering-focused reference for evaluating the XC7Z045-1FBG676CES.

Permintaan RFG Kontak
XC7Z045-1FBG676I - Zynq-7000 SoC, 350K Logic Cells | AMD
XC7Z045-1FBG676I

XC7Z045-1FBG676I - Zynq-7000 SoC, 350K Logic Cells | AMD

The AMD XC7Z045-1FBG676I is a Zynq-7000 family System-on-Chip (SoC) that integrates a dual-core ARM Cortex-A9 MPCore processor with a Kintex-7 FPGA fabric. It is housed in a 676-pin FCBGA package (27x27 mm) and operates at a maximum clock frequency of 667 MHz. The device provides 350K logic cells, making it suitable for high-performance embedded applications requiring both software programmability and hardware flexibility. A System-on-Chip (SoC) is an integrated circuit that combines multiple system components, such as processors, memory interfaces, and I/O, onto a single substrate. The Zynq-7000 family specifically merges a processing system (PS) based on ARM cores with programmable logic (PL) based on FPGA fabric. This architecture allows designers to implement complex algorithms in hardware while maintaining the flexibility of software-defined control, bridging the gap between traditional microprocessors and FPGAs. Key features of the XC7Z045-1FBG676I include 350K logic cells, 256 KB of on-chip RAM, and support for high-speed transceivers. The device also includes a rich set of I/O options, including multiple high-speed serial transceivers and general-purpose I/O banks. The dual-core ARM Cortex-A9 processor runs at up to 667 MHz, providing substantial processing power for real-time applications. From a technical perspective, the XC7Z045-1FBG676I leverages AMD's advanced 28nm process technology, balancing performance and power efficiency. The integration of the ARM processor with the Kintex-7 FPGA fabric enables low-latency, high-bandwidth communication between software and hardware, which is critical for applications like software-defined radio, image processing, and industrial control. The device supports a wide range of industry-standard interfaces, including DDR3/DDR4 memory controllers and PCIe. Typical applications include high-end embedded computing, aerospace and defense systems, medical imaging, and wired/wireless communications. The combination of a powerful processor and reconfigurable logic makes it ideal for prototyping and production in demanding environments. When designing with this device, careful attention must be paid to power supply sequencing and decoupling. The multiple power rails require proper sequencing to avoid latch-up or damage. Additionally, the high-speed transceivers demand clean power and careful PCB layout to maintain signal integrity.

Permintaan RFG Kontak
XC7Z045-1FFG676C - 350K Zynq SoC, 667MHz | AMD | FPGA
XC7Z045-1FFG676C

XC7Z045-1FFG676C - 350K Zynq SoC, 667MHz | AMD | FPGA

The AMD XC7Z045-1FFG676C is a Zynq-7000 system-on-chip that combines a Kintex-7 FPGA with a dual-core Arm Cortex-A9 processor. The device provides 350K logic cells, a processor clock frequency of 667 MHz, and 130 user I/Os in a 676-pin FCBGA package measuring 27 x 27 mm. The -1 speed grade supports a maximum processor operating frequency of 667 MHz, while the C suffix denotes the commercial temperature grade. A Zynq-7000 system-on-chip is an FPGA with programmable logic integrated with a hard processor subsystem. Unlike a conventional processor, the FPGA fabric can implement parallel data paths, custom interfaces, accelerators, and real-time control logic. The integrated dual-core Arm Cortex-A9 subsystem executes software, operating systems, networking functions, and control code, allowing one device to combine sequential processing and hardware parallelism. Key features include 350K FPGA logic cells, dual-core Arm Cortex-A9 processing, CoreSight debug support, and 130 user I/Os. The Kintex-7 programmable logic fabric supports parallel sensor processing, video pipelines, high-speed data acquisition, and hardware-assisted control. A 676-ball FCBGA provides the high pin count needed for interfaces, memory connectivity, power, ground, and differential I/O in compact embedded systems. The part is manufactured on a 28 nm process and uses a mixed architecture in which software controls system behavior while programmable logic accelerates data-intensive workloads. The processor side supports operating-system-based designs, and the programmable side can implement interfaces whose timing and parallelism would be inefficient using the processor alone. This architecture is particularly useful when deterministic response, low-latency transfers, or concurrent real-time processing are required. Typical applications include industrial machine vision, industrial automation, robotics, communications equipment, embedded control, high-speed data acquisition, and defense or aerospace electronics. The 667 MHz dual-core subsystem is appropriate for protocol handling and supervisory control, while the FPGA fabric can accelerate image processing, filtering, packet inspection, or sensor fusion without excessive processor overhead. Design considerations include confirming the FCBGA land pattern, power rails, decoupling strategy, DDR memory interface, and pin constraints before layout. Because this is a high-pin-count BGA, escape routing, via distribution, and thermal performance require careful PCB planning. The commercial-grade C suffix should be checked against the final ambient-temperature range and system qualification requirements. This page combines the device architecture, package details, engineering-use guidance, and same-footprint replacement analysis to support faster selection and board-level planning for Zynq-7000 designs.

Permintaan RFG Kontak
XC7Z045-1FFG676I - Dual Cortex-A9 667MHz SoC | AMD
XC7Z045-1FFG676I

XC7Z045-1FFG676I - Dual Cortex-A9 667MHz SoC | AMD

The AMD XC7Z045-1FFG676I is a Zynq-7000 Kintex-7 programmable system-on-chip with 350,000 logic cells, a dual-core Arm Cortex-A9 MPCore processor operating at 667 MHz, and 676-pin FCBGA packaging in a 27 mm by 27 mm body. It integrates programmable logic, fixed-function processing, memory interfaces, high-speed I/O, and debugging capabilities in one device. A Zynq-7000 SoC combines an FPGA fabric with one or more Arm Cortex-A9 processors. The programmable logic handles parallel data paths, interfaces, timing, and signal processing, while the processor subsystem supports operating systems, networking, control software, and application-level logic. This heterogeneous architecture provides more flexibility than a conventional microcontroller and more software integration than a standalone FPGA. The XC7Z045-1FFG676I provides 350,000 logic cells and a dual-core Arm Cortex-A9 MPCore configuration. Its CoreSight debug capabilities support trace and debug workflows, while the processor runs at 667 MHz. The device uses 28 nm FPGA technology and is associated with a 1 V core supply requirement, making it suitable for designs requiring substantial programmable logic alongside embedded processing. The integrated architecture can reduce board-level component count by combining an Arm processor, programmable logic, dedicated memory interfaces, and high-speed serial or parallel I/O. Designers can partition work between software and hardware: the processor can manage protocols and control flow, while FPGA logic accelerates parallel operations or implements time-critical interfaces. Hardware/software partitioning remains a key architecture decision because moving logic into programmable fabric can reduce CPU workload but increase resource and timing complexity. Typical uses include industrial control, factory automation, network infrastructure, machine vision, test and measurement, video processing, and communications equipment. The 676-ball FCBGA package supports high-density connections but requires careful PCB escape routing, power-plane design, thermal analysis, and assembly process control. Unlike a leaded package, it cannot be inserted into a conventional through-hole socket. For a new design, use the AMD Zynq-7000 package pinout files and ds191 data sheet to assign every ball, confirm voltage rails, and validate the selected board footprint. Programmable-logic clocking, DDR memory routing, high-speed differential I/O, decoupling, and exposed-pad power delivery require constraint-driven layout and post-route signal-integrity checks. This product page combines the core device characteristics with package guidance, speed- and grade-oriented alternatives, and practical selection criteria. It also distinguishes the XC7Z045-1FFG676I from related XC7Z045 variants by package code, speed suffix, and temperature-grade suffix so engineers can assess PCB reuse without confusing equivalent compatibility with identical qualification.

Permintaan RFG Kontak
XC7Z045-1FFG900C - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z045-1FFG900C

XC7Z045-1FFG900C - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z045-1FFG900C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor with CoreSight debug capability and approximately 350,000 FPGA logic cells. The device operates at 667 MHz and is packaged in a 900-ball FCBGA measuring 31 x 31 mm. Its integrated architecture allows software-controlled applications and programmable logic to share DDR memory, peripherals, and I/O resources. A Zynq-7000 SoC is a programmable logic device combined with one or more Arm processors. The processor subsystem executes operating systems and application software, while the FPGA fabric implements parallel hardware, high-speed interfaces, and custom accelerators. This hierarchy places the device among FPGA and CPLD solutions, adaptive SoCs, and programmable semiconductor devices. Compared with a separate processor and FPGA, the integrated Zynq architecture can simplify data exchange and shorten the path between software-controlled functions and hardware logic. The XC7Z045 provides 350K logic cells, dual Arm Cortex-A9 cores, and CoreSight support. The 667 MHz processor rating supports embedded Linux and bare-metal software workloads, while the Kintex-7-class programmable logic supports parallel data processing, protocol handling, and custom accelerators. The 900-FCBGA package provides a large pin count for high-performance I/O and memory connectivity, although its fine pitch and thermal requirements make careful PCB design essential. The XC7Z045-1FFG900C belongs to the Zynq-7000 SoC family identified in the AMD DS191 product family document. Its “-1” speed designation, “FFG900” package designation, and “C” suffix identify the ordered device configuration. The 31 x 31 mm FCBGA is a surface-mount package, so the PCB must provide the full land pattern, power distribution, decoupling, and thermal-relief features specified by AMD. Typical uses include industrial machine vision, networked industrial control, test and measurement, communications infrastructure, high-resolution display processing, and embedded vision systems. In each case, the Arm subsystem can manage control software while the FPGA fabric handles deterministic data acquisition, image processing, protocol conversion, or high-speed parallel interfaces. Development requires FPGA-design software for the logic fabric and an embedded software toolchain for the Arm subsystem. Design the power rails for both processor and FPGA requirements, including transient response and sequencing. Place high-frequency decoupling capacitors close to the supply and ground balls, preserve the AMD-recommended ball-grid land pattern, and provide thermal paths through the PCB. Because a 900-FCBGA package has many fine-pitch balls, inspect the assembled board for solder bridging and verify power rails before enabling the programmable logic. This page combines the verified Zynq-7000 device identity and package information with practical design guidance, qualified same-footprint alternatives, application-specific engineering notes, and a parameter comparison for faster procurement and design decisions.

Permintaan RFG Kontak