XC7Z035-1FBG676I - 667MHz Zynq SoC FPGA | AMD
MPN: XC7Z035-1FBG676I ✓ AktifXC7Z035-1FBG676I Ringkasan
A Zynq-7000 SoC belongs to the FPGA & CPLD hierarchy and combines a hardware adaptive SoC architecture with programmable logic. Unlike a standalone microcontroller, the device allows ARM software and FPGA fabric to operate within one chip while communicating through dedicated interfaces. This heterogeneous architecture supports concurrent control processing, hardware data processing, signal acquisition, communications, and real-time decision-making without requiring separate processor and FPGA packages.
The device provides approximately 275,000 logic cells and 250 I/O in its largest configuration. A 667 MHz Cortex-A9 processor supports the embedded software side, while the Kintex-7 fabric handles parallel logic, high-speed interface functions, protocol acceleration, and timing-sensitive workloads. CoreSight provides integrated visibility for debugging the processing system, and the Zynq architecture supports a combination of Linux, real-time operating systems, bare-metal firmware, and hardware-assisted pipelines.
The XC7Z035-1FBG676I uses a 676-ball flip-chip BGA package, making it appropriate for dense multilayer PCB layouts with high-density escape routing and controlled impedance requirements. Its industrial temperature qualification covers applications operating from -40°C through +100°C. The package combines the Arm processing system, programmable logic, memory interfaces, and general-purpose I/O in a single 27 x 27 mm component.
Typical uses include industrial machine vision, test and measurement equipment, industrial networking, embedded video processing, communications infrastructure, and control systems that benefit from parallel hardware acceleration. Designers can assign time-critical filtering, protocol conversion, data acquisition, or interface bridging to the programmable logic while the Arm cores execute control software, operating systems, communications stacks, and supervisory functions.
PCB implementation requires careful BGA escape routing, power and ground-plane design, decoupling, thermal management, and differential-pair routing. Use the AMD Zynq-7000 package pinout files referenced in the design documentation to assign every ball correctly. Confirm the selected DDR memory interface, transceivers, bank voltages, configuration method, and clocking requirements before schematic capture.
This page combines the confirmed device identity, package, operating-temperature, lifecycle, and environmental information with practical implementation guidance. It also identifies same-footprint Zynq-7000 ordering options for engineering comparison while distinguishing speed, temperature, and extended-temperature qualification changes that must be checked before substitution.
Alternatif penggantian untuk XC7Z035-1FBG676I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7Z035-1FBG676I (sama faktor bentuk dan footprint) — berbeda di dalam Package, Device Type, RoHS Status, Temperature Grade, Mounting Type.
XC7Z035-1FBG676C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z035-2FBG676I
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC7Z035-L2FBG676I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7Z035-2FBG676C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC7Z035-L2FBG676C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC7Z035-1FBG676I Rating Maksimal & Karakteristik Listrik
| Device Type | Zynq-7000 adaptive SoC with Kintex-7 FPGA fabric |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Processor Clock | 667 MHz |
| FPGA Logic Cells | Approximately 275,000 cells |
| FPGA Family | Kintex-7 |
| Process Technology | 28 nm |
| Debug Support | CoreSight |
| General-Purpose I/O | 250 I/O |
| Paket | 676-FCBGA, 27 x 27 mm |
| Package Type | Flip-Chip Ball Grid Array |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40°C to +100°C |
| Temperature Grade | Industrial |
| Status Lingkungan Hidup | Active |
| Status RoHS | ROHS3 Compliant |
| Lead Time | 16 weeks |
| Minimum Order Quantity | 1 unit |
| Packaging | Tray |
XC7Z035-1FBG676I flip-chip ball grid array Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7Z035-1FBG676I (flip-chip ball grid array pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7Z035-1FBG676I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7Z035-1FBG676I cocok untuk 6 aplikasis: Industrial Machine Vision, Test and Measurement Equipment, Industrial Networking Gateway, Communications Infrastructure, Embedded Video Processing, Real-Time Control System.
Industrial Machine Vision
The XC7Z035-1FBG676I fits industrial machine-vision controllers because it combines a 667 MHz dual-core Arm Cortex-A9 processing system with a Kintex-7 fabric containing approximately 275,000 logic cells. The Arm cores can run operating-system-level control, image management, and communications, while programmable logic can accelerate pixel formatting, thresholding, filtering, and frame-buffer operations. Its -40°C to +100°C operating range supports factory environments where consumer-temperature devices may be unsuitable. The 676-FCBGA package demands a multilayer PCB, controlled-impedance routing, solid decoupling, and a thermal design that accounts for simultaneous processor and FPGA activity.
Direkomendasikan
Test and Measurement Equipment
In automated test equipment, the XC7Z035-1FBG676I can divide responsibilities between firmware and programmable hardware. The dual-core Arm Cortex-A9 at 667 MHz supports instrument control, user interfaces, data handling, and real-time scheduling, while the 275,000-cell Kintex-7 fabric can implement parallel acquisition, pattern generation, timing, or digital signal processing pipelines. This arrangement reduces the need to transfer every high-speed operation through a processor bus. The industrial -40°C to +100°C rating is useful for laboratory and production-floor equipment. The design must still account for FCBGA power integrity, high-speed clock routing, DDR memory constraints, and heat spreading.
Direkomendasikan
Industrial Networking Gateway
The XC7Z035-1FBG676I is suitable for an industrial networking gateway that must handle software protocol stacks and hardware-intensive packet processing concurrently. Arm Cortex-A9 cores can run networking services, management interfaces, security functions, and configuration logic, while the FPGA fabric can accelerate packet classification, compression, encryption-related data movement, or custom interfaces. Its 667 MHz processor clock supports responsive control-plane work, and the industrial temperature range fits factory-floor gateways. The 676-FCBGA implementation requires careful partitioning between processor peripherals and PL, deterministic clocking, low-noise power distribution, and layout verification against the package pinout files.
Direkomendasikan
Communications Infrastructure
For communications infrastructure, the XC7Z035-1FBG676I provides a heterogeneous combination of 667 MHz Arm processing and approximately 275,000 programmable logic cells. The processor side can manage protocol stacks, diagnostics, and control-plane traffic, while programmable logic can implement custom framing, time stamping, interface conversion, or low-latency data paths. This flexibility is valuable in radio, baseband, and specialized network equipment where product differentiation often extends beyond standard processor peripherals. The industrial rating supports controlled environments, and the 28 nm Zynq implementation can reduce package count compared with separate processor and FPGA designs. Timing closure and thermal analysis remain essential for sustained high-utilization operation.
Direkomendasikan
Embedded Video Processing
The XC7Z035-1FBG676I can accelerate embedded video workloads by assigning pixel pipelines and format conversion to Kintex-7 programmable logic while the dual-core Cortex-A9 system handles control, buffering, networking, and application software. Approximately 275,000 logic cells provide space for parallel datapaths, while the 667 MHz Arm cores can supervise multiple streams and peripheral functions. Its -40°C to +100°C rating is appropriate for industrial monitoring equipment and cameras deployed outside controlled room temperatures. A practical implementation requires compatible video interface devices, DDR memory planning, clock-domain crossing, bounded-latency design, and an FCBGA layout that maintains signal and power integrity.
Direkomendasikan
Real-Time Control System
The XC7Z035-1FBG676I supports real-time control systems that combine deterministic hardware response with a high-level operating environment. The Kintex-7 fabric can implement timers, state machines, sampling pipelines, motor-control peripherals, or custom sensor interfaces, while the 667 MHz dual-core Arm subsystem executes supervisory algorithms, diagnostics, and communications. Placing both functions on one device can reduce board area and avoid transferring time-critical events over a chip-to-chip interface. The industrial temperature range covers demanding control cabinets and mobile equipment. Design effort should include worst-case latency analysis, DDR and cache behavior, clock-domain constraints, thermal verification, and formal checks of processor-to-PL interrupts and shared-memory transactions.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7Z035-1FBG676I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7Z035-1FBG676C | XC7Z035-2FBG676I | XC7Z035-L2FBG676I | XC7Z035-2FBG676C | XC7Z035-L2FBG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) |
| Speed Grade | -1 | -1 | -2 | L2 | -2 | L2 |
| Processor | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore |
| FPGA Fabric | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Diferensiator Kunci
- Industrial temperature coverage (vsXC7Z035-1FBG676C)
- 667 MHz Arm processing performance (vsXC7Z035-2FBG676I)
- Single-package heterogeneous processing (vsXC7Z035-L2FBG676I)
Catatan Desain
Plan the XC7Z035-1FBG676I as a high-density FCBGA design with uninterrupted power planes, local decoupling, via-in-pad or microvia fanout where supported, and controlled-impedance escape routing. Begin with the AMD Zynq-7000 Package Device Pinout Files, then cross-check every ball against the manufacturer datasheet. Keep high-speed clocks and memory interfaces away from noisy power-regulator switching nodes, and include test points for configuration, reset, clock, and debug signals.
Estimate thermal performance at the maximum ambient temperature and the highest expected processor-plus-FPGA utilization rather than using nominal clock activity alone. The XC7Z035-1FBG676I supports -40°C to +100°C operation, but package dissipation depends on resource use, I/O activity, memory traffic, and voltage. Use the AMD power-estimation methodology and the PCB thermal model, preserve continuous copper beneath the BGA where the package permits, and add heat-spreader or heatsink provisions when the calculated junction margin is insufficient.
Implement processor, DDR, and transceiver interfaces as a complete signal-integrity and power-integrity exercise. Use the manufacturer's recommended topology, via geometry, layer transitions, length relationships, and I/O standards, and verify the final stack-up with field solvers or measured coupons. The 28 nm SoC may demand stricter switching-noise control than simpler mixed-signal systems, so separate sensitive analog supplies where applicable and validate DDR eye margins, clock jitter, and simultaneous-switching-noise behavior.
Do not substitute a Zynq-7000 ordering code based only on the FBG676 package suffix. The -1, -2, L2, I, C, and E characters encode different speed, temperature, or qualification requirements. When considering XC7Z035-1FBG676C, XC7Z035-2FBG676I, or an L2 option, compare the complete AMD ordering guide, Vivado device support, timing limits, power behavior, and required temperature range. A footprint match alone does not establish functional or qualification equivalence.
Informasi Konformitas
The product is listed as ROHS3 Compliant. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status are not stated in the product information and remain unknown.