Produk (44.000+)

MC74F169N - 4-Bit Binary Up/Down Counter | onsemi
MC74F169N

MC74F169N - 4-Bit Binary Up/Down Counter | onsemi

The onsemi MC74F169N is a 4-bit synchronous binary up/down counter in a 16-pin PDIP package. It operates from a 4.5 V to 5.5 V supply, counts on the positive edge of the clock, and provides a maximum operating frequency of 100 MHz. The device includes separate load, master-reset, count-direction, carry, and four parallel data inputs, making it useful for frequency division, state sequencing, digital timing, and control-system counting applications. A counter is a sequential digital circuit that stores a binary number and changes that number when a clock edge arrives. An up/down counter can increment or decrement its state according to a direction control input, while a parallel-load input allows the counter to start from a preset value. The MC74F169N belongs to the F-series 74-family logic category, combining TTL-compatible signal conventions with high-speed operation. Key features include 4-bit counting capacity, a 4.5 V to 5.5 V operating supply range, positive-edge clock triggering, a 100 MHz maximum frequency rating, and a carry output that indicates overflow or underflow of the counting range. The through-hole PDIP-16 package is suitable for legacy industrial, test, instrumentation, and educational designs where a surface-mount footprint is not required. The counter supports parallel loading of the four data inputs and provides a master-reset function for initialization. The direction input selects counting up or counting down, while the carry output can be monitored by a system controller or cascaded into another counter stage. Because the device is a high-speed logic part, power distribution and signal-integrity practices remain important when driving long PCB traces or connecting external clock sources. Typical applications include digital frequency dividers, programmable sequence counters, pulse-counting interfaces, timing generators, and general-purpose logic in industrial control systems. The 16-pin PDIP package also makes the MC74F169N suitable for prototyping and repair applications where a socketed through-hole component is preferred. When laying out the circuit, place the clock and control traces away from noisy switching nodes and provide a clean, decoupled supply at the VCC pin. Confirm the polarity and timing requirements of the load, reset, and direction inputs in the manufacturer datasheet before cascading counters or driving external control logic. This page provides a structured comparison of the MC74F169N with available catalog references, practical design notes, application guidance, and the technical attributes needed for initial design-in and sourcing review.

Permintaan RFG Kontak
MC74F243M - Quad Bus Transceiver, 3-State | onsemi | SOIC-14
MC74F243M

MC74F243M - Quad Bus Transceiver, 3-State | onsemi | SOIC-14

The onsemi MC74F243M is a quad bus transceiver with 3-STATE outputs in a 14-pin small-outline integrated circuit (SOIC-14) surface-mount package. It belongs to the 74F (FAST Schottky TTL) logic family, which provides significantly faster propagation delays than standard 74LS TTL while remaining compatible with TTL voltage levels. A bus transceiver is an interface IC that allows bidirectional data transfer between two buses or between a bus and a processor. In the logic IC hierarchy, the 74F243 is a specialized interface device - part of the broader 7400-series transistor-transistor logic (TTL) family - combining four driver circuits and four receiver circuits arranged in the same physical package so that data can flow from the A bus to the B bus or from the B bus to the A bus under the control of separate enable inputs. Key features of the MC74F243 include four independent bus transceiver channels, 3-STATE outputs that effectively disconnect the device from the bus when disabled, and separate direction control (GAB and GBA type enables) for each transfer direction. The FAST Schottky TTL process delivers the fast edge rates expected of the 74F family, making the device suitable for backplane and inter-board data paths that outgrow slower 74LS-class transceivers. Architecturally, each transceiver cell contains a driver with a 3-STATE output stage and a receiver path whose active state is selected by the enable pins. When an enable input is inactive, the corresponding outputs assume the high-impedance state, allowing multiple transceivers to share a common bus without bus contention. Typical applications include bidirectional CPU memory-bus buffering, backplane data transceivers in industrial control systems, general-purpose 4-bit bus isolation, and legacy system maintenance where original TTL bus transceivers must be sourced for repair. A key design consideration is that FAST TTL devices consume more power than CMOS alternatives; verify the drive and thermal requirements of your bus before selecting 74F over 74LS or 74HC parts. This page consolidates sourcing availability, packaging details, and practical design notes for the MC74F243M in one place, complementing the manufacturer datasheet with drop-in replacement guidance not found on distributor pages.

Permintaan RFG Kontak
MC74F283N - 4-Bit Fast-Carry Full Adder | onsemi
MC74F283N

MC74F283N - 4-Bit Fast-Carry Full Adder | onsemi

The onsemi MC74F283N is a 4-bit binary full-adder integrated circuit with fast carry, designed for arithmetic logic and digital counter applications. The device operates from a 5.5 V supply and is packaged in a 16-pin DIP. Its four parallel operand inputs, sum outputs, and carry inputs and outputs support conventional binary addition and subtraction when paired with appropriate logic inversion. A full adder is a combinational digital-logic building block that adds two binary operands and an incoming carry bit, producing one sum bit and one carry-out bit. Four full-adder stages combined in one IC provide a practical 4-bit adder subsystem. The MC74F283N belongs to the MC74F logic family and is positioned as a high-speed logic function for applications requiring more propagation performance than older LS-series devices. The MC74F283N provides four independently addressed sum outputs, four operand inputs for each addition stage, and carry connections that can be cascaded with additional adder packages. Fast carry reduces the delay between adjacent bit stages, which is important in synchronous counters, arithmetic units, address-generation logic, test equipment, and control systems where timing margin is limited. The 16-DIP package supports conventional through-hole PCB assembly and prototyping. Because the device exposes its arithmetic signals directly, system designers must account for signal fan-out, input transition times, unused inputs, and propagation delay when constructing clocked or cascaded arithmetic networks. The 5.5 V supply requirement is a key selection criterion for systems designed around classic TTL-compatible logic families. Typical uses include binary counters, digital accumulators, frequency-division and sequencing circuits, arithmetic control units, instrumentation, industrial automation, and educational logic systems. A multi-package implementation can extend the adder width beyond four bits by connecting the carry output of one MC74F283N to the carry input of the next package. For a new design, verify the complete pin assignment, propagation-delay limits, supply-current behavior, and input requirements in the manufacturer datasheet before finalizing PCB routing or system timing. The DIP footprint also makes this device particularly convenient where component insertion, inspection, repair, or manual prototyping is preferred over compact surface-mount assembly.

Permintaan RFG Kontak
MC74F538N - 1-of-8 Decoder, 3-State Outputs | onsemi | DIP-20
MC74F538N

MC74F538N - 1-of-8 Decoder, 3-State Outputs | onsemi | DIP-20

The onsemi MC74F538N is a 1-of-8 decoder/demultiplexer with 3-state outputs in a 20-pin plastic dual in-line package (PDIP-20, suffix N). It accepts three address inputs (A0-A2) and decodes them to activate exactly one of eight mutually exclusive outputs, with a polarity control input (P) that selects whether outputs are active LOW or active HIGH. A decoder/demultiplexer is a combinational logic device that converts a binary-coded input into a one-hot output selection, forming part of the broader logic IC hierarchy: decoder -> combinational logic -> SSI/MSI logic -> digital semiconductors. Decoders are fundamental building blocks for memory address decoding, peripheral chip-select generation, and data routing in digital systems. Key features of the MC74F538N include the three-state (3-STATE) outputs that allow multiple devices to share a common bus, the polarity control input that lets a single design serve both active-LOW and active-HIGH chip-select schemes, and the F/FAST (Fairchild Advanced Schottky TTL) process family that delivers significantly faster propagation delays than standard 74-series TTL logic. Architecturally, the device belongs to the FAST series of Schottky-clamped TTL circuits, which use an advanced oxide-isolated process to reduce propagation delay and increase toggle speeds while retaining TTL-compatible input thresholds. The 3-state output structure places each output in a high-impedance state when the output control is disabled, so the MC74F538N can be paralleled with other bus drivers without contention. Typical applications include memory address decoding in embedded controllers, chip-select generation for peripheral ICs, data routing and bus switching in industrial control equipment, and line decoding in legacy telecommunications and instrumentation platforms that use 5V TTL logic levels. When designing with this part, keep unused address inputs tied to defined logic levels and ensure the 3-state output control is asserted correctly during bus arbitration to avoid bus contention. Decoupling capacitors of 0.1uF per supply pin are recommended for FAST-series logic, which can draw significant transient supply current during output transitions. This page adds unique value beyond the manufacturer datasheet by combining distributor sourcing information, drop-in alternative analysis, practical design notes, and lifecycle guidance in a single reference.

Permintaan RFG Kontak
MC74F569N - 4-Bit Bidirectional Counter | onsemi | Logic
MC74F569N

MC74F569N - 4-Bit Bidirectional Counter | onsemi | Logic

The onsemi MC74F569N is a 4-bit bidirectional counter with 3-state outputs, packaged for logic-counter applications that require reversible counting and tri-state bus control. The device provides a 4-bit counting element, supports counting in both directions, and places its outputs in a high-impedance state when the output-enable function is inactive. This combination makes it useful for programmable event counters, digital timing systems, address-generation logic, and control systems that need to share a bus. A bidirectional counter is a synchronous digital sequential circuit that counts either upward or downward from a loaded preset value. Unlike a simple unidirectional ripple counter, this type of counter can track positive and negative counting sequences from the same logic state. The 3-state output architecture belongs to the broader bus-interface hierarchy: logic IC > counter > binary counter > bus-compatible digital component. Tri-state outputs permit multiple devices to share a common data bus without creating contention when a device is disabled. The MC74F569N is identified as a counter IC with a 4-bit element. Its principal functional characteristics include bidirectional counting, preset capability for programmable operation, and carry-look-ahead functions intended to simplify cascading, as described for the related 74F569 family. Three-state outputs add bus-interface flexibility, allowing an external controller to select which counter drives the shared data path. These characteristics are more important for system timing and control than the numeric operating frequency alone. The 74F569 family architecture is based on edge-triggered logic behavior intended for synchronous counter operation. A synchronous design allows the counter state to advance in response to a common clock edge, simplifying multi-stage count chains because the stages do not rely on ripple propagation. Preset inputs establish an initial count, while direction control determines whether subsequent clock edges increment or decrement that count. Carry logic provides a way to detect and extend counting ranges beyond four bits. Typical uses include digital chronometers, industrial sequence controllers, frequency-divider and event-counting circuits, programmable timing modules, and address-generation blocks. In each case, the counter can be loaded with a starting value, advanced or reversed under direction control, and connected to shared bus lines through its 3-state outputs. Care is required when multiple counters share a bus because exactly one enabled device should drive the bus at any given time. For PCB implementation, use the manufacturer pin-description table to assign every signal and preserve the original package footprint, power connections, and decoupling arrangement. A common 0.1 uF ceramic bypass capacitor should be placed close to the power and ground pins when the device is used in conventional digital logic designs. Clock, count-enable, preset, and direction traces should be kept away from output and bus traces where switching activity could cause unintended transitions. This product record combines the MC74F569N identity, 4-bit bidirectional-counter function, 3-state-output feature, sourcing links, package constraints, and replacement guidance into a design-oriented reference. Because complete electrical ratings and pin assignments are not reproduced in the manufacturer document excerpts, use the MC74F569N datasheet for final logic-level, timing, package, and footprint decisions before placing an order.

Permintaan RFG Kontak
MC74F85M - 4-Bit Magnitude Comparator | onsemi
MC74F85M

MC74F85M - 4-Bit Magnitude Comparator | onsemi

onsemi MC74F85M is a 4-bit magnitude comparator that compares two four-bit binary, BCD, or other monotonic code words and indicates whether the first operand is greater than, equal to, or less than the second. The device belongs to the Fast Schottky TTL logic family and is associated with the MC74F85 4-bit magnitude comparator function. Its three active outputs provide the fundamental comparison results required by digital control, sorting, arbitration, and addressing circuits. A magnitude comparator is a combinational logic IC that evaluates the numerical relationship between two unsigned multibit operands. The MC74F85M sits within the hierarchy of digital comparator, combinational logic, logic IC, and integrated circuit categories. By presenting greater-than, equal-to, and less-than results in parallel, it reduces the number of gates, latches, and software operations otherwise needed to determine the relationship between two values. The principal feature is expansion capability: the 74F85 function can be extended to almost any operand length. Its inputs accept binary, BCD, or other monotonic code relationships, while the output structure identifies three possible magnitude states. High-impedance NPN base inputs are listed as a feature of the related 74F85 family, supporting practical interfacing in TTL systems. These characteristics make the comparator useful where multi-level ordering decisions must be resolved quickly and deterministically. Operationally, the three outputs support comparator cascading. When multiple four-bit sections are used, the upper section can use the lower section's result as an additional comparison input, allowing an eight-bit, twelve-bit, or wider magnitude decision. This architecture is faster and less complex than building a complete comparator from individual gate networks. The associated 74F85 description specifically identifies expansion to almost any length as a core capability. Typical applications include binary and BCD value comparison, conditional branch generation, address and priority arbitration, sequence controllers, sorting networks, and industrial logic systems. The comparator can also support retrofits of legacy TTL boards because the MC74F85 function is associated with the established Fast Schottky TTL family and commonly documented under the 74F85 designation. Designers should confirm the exact package, pin assignment, supply voltage, input levels, output timing, and propagation-delay limits for the MC74F85M before PCB release. Cascaded designs must allocate the additional comparison inputs correctly and route output states without creating contention. Because legacy logic may use different TTL families, input and output compatibility should be checked against the actual system levels rather than inferred from the comparator function alone. This product overview synthesizes the verified function, expansion behavior, package uncertainty, sourcing status, and practical implementation considerations for engineers comparing the MC74F85M with other 74F85-compatible implementations. It also identifies the electrical details that must be checked in the manufacturer datasheet before qualification or layout approval.

Permintaan RFG Kontak
MC74HC1G14DFT1G - Single Schmitt-Trigger CMOS Inverter | onsemi
MC74HC1G14DFT1G

MC74HC1G14DFT1G - Single Schmitt-Trigger CMOS Inverter | onsemi

The onsemi MC74HC1G14DFT1G is a single-channel high-speed CMOS inverter with a Schmitt-trigger input, supplied in the compact 5-pin SC-88A SC-70-5/SOT-353 package. Verified distributor information identifies a 2 V to 6 V single CMOS Schmitt-input device with five pins and a specified operating-temperature range of -55°C to 125°C. Its Schmitt-trigger input provides separate switching thresholds for rising and falling edges, improving noise immunity when the input crosses slowly or contains ripple. A logic inverter is a combinational digital component that produces the complement of its input: a low input produces a high output, while a high input produces a low output. Adding Schmitt-trigger hysteresis creates a more robust threshold detector than an ordinary inverter. Within the device hierarchy, this part belongs to the CMOS logic family and the 74HC high-speed CMOS series, combining low static power with practical noise-tolerant operation. The verified listing describes the MC74HC1G14 as a high-speed CMOS inverter fabricated using silicon-gate CMOS technology. Its internal multistage construction includes a buffered output intended to provide high noise immunity and a stable output. The onsemi documentation also notes that MC74HC1G14 output drive current is one-half that of the broader MC74HC series, making load capability and external pull-up selection important design considerations. Typical uses include slow-edge signal conditioning, debouncing, pulse shaping, transistor or relay-interface inversion, and industrial digital control where a noisy or slowly changing input could otherwise cause repeated switching. The device is also appropriate for compact embedded designs requiring a rail-to-rail CMOS inverter within a 2 V to 6 V supply range. Designers should verify absolute maximum ratings, propagation timing, output-drive current, and unused-pin requirements in the manufacturer datasheet. Because the verified data does not provide complete pin-level information, pricing, or sufficient evidence for five drop-in equivalents, this page avoids fabricating those values and marks unavailable specifications explicitly. This page combines verified manufacturer and distributor information with a transparent engineering assessment. It distinguishes confirmed device characteristics from data still requiring datasheet confirmation and avoids presenting comparator results as guaranteed drop-in replacements without complete electrical and pinout validation.

Permintaan RFG Kontak
MC74VHC1G14DFT1G - Single Schmitt-Trigger Inverter, SC-88A / SC-70-5
MC74VHC1G14DFT1G

MC74VHC1G14DFT1G - Single Schmitt-Trigger Inverter, SC-88A / SC-70-5

The onsemi MC74VHC1G14DFT1G is a single-channel CMOS Schmitt-trigger inverter fabricated with advanced high-speed silicon-gate CMOS technology, supplied in a 5-pin SC-88A / SC-70-5 / SOT-353 surface-mount package. It operates from a 2 V to 5.5 V Vcc supply, supports input voltages up to 7 V regardless of Vcc, and provides balanced propagation delays with typical tPD of 3.5 ns at VCC = 5 V. A Schmitt-trigger inverter is a single-input logic gate whose transfer characteristic includes a defined upper and lower threshold voltage (hysteresis), making the device immune to slow or noisy input edges. The MC74VHC1G14 sits within the broader logic-gate family (inverter -> NOT gate -> combinational logic -> CMOS logic -> standard logic IC), and the 74VHC sub-family delivers Bipolar-Schottky-TTL-class speed at a fraction of the quiescent power. Key features include CMOS-level input thresholds (the MC74VHC1GT14 variant provides TTL-level thresholds), 8 mA output drive capability at 5 V, 1 µA maximum quiescent supply current at 25 °C, power-down protection on the inputs, and internal ESD protection. The hysteresis characteristic is typically 1.5 V at 5 V supply, eliminating oscillations on slowly changing signals and improving noise margin in harsh environments. The architecture uses three internal stages with a buffered output stage, providing high noise immunity and stable output swings rail-to-rail. The internal FET count is ≤ 100, contributing to its tiny footprint and low dynamic power. Pb-free packages are available, and the device is designed for 1.65 V to 5.5 V Vcc operation, allowing direct interfacing between 3.3 V and 5 V logic domains. Typical applications include signal conditioning for mechanical switch debouncing, waveform shaping in oscillator and pulse-generator circuits, level translation between 5 V and 3.3 V logic, microcontroller reset and wake-up pulse generation, and general-purpose logic inversion in portable, industrial, and consumer electronics where board space is at a premium. Design consideration: although the part tolerates input voltages up to 7 V even with Vcc = 0 V, designers must still respect the absolute-maximum input rating and avoid persistent over-voltage stress. Decouple Vcc with a 0.1 µF ceramic capacitor placed within a few millimeters of the supply pin. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the same SC-88A footprint, comparison parameters, and practical design notes beyond what the manufacturer datasheet alone provides, giving engineers a one-stop reference for sourcing and qualifying the MC74VHC1G14DFT1G.

Permintaan RFG Kontak
MC74VHC1G14DFT2G - Single Schmitt-Trigger Inverter, 2-5.5V CMOS | onsemi
MC74VHC1G14DFT2G

MC74VHC1G14DFT2G - Single Schmitt-Trigger Inverter, 2-5.5V CMOS | onsemi

The onsemi MC74VHC1G14DFT2G is a single-gate CMOS Schmitt-trigger inverter in a 5-pin SC-88A (SOT-353) surface-mount package, designed for 2 V to 5.5 V VCC operation. The device uses silicon-gate CMOS technology to deliver high-speed logic with low static power dissipation of 1 µA maximum at TA = 25 °C, and features a typical propagation delay of 3.5 ns at VCC = 5 V per the onsemi datasheet. The built-in Schmitt-trigger input hysteresis provides high noise immunity and stable output even on slow or noisy edges, making it well-suited for signal conditioning, oscillator building blocks, and level translation in mixed-signal systems. An inverter is a fundamental single-input logic gate that produces a logical NOT of its input. Schmitt-trigger inverters extend this with hysteresis: the input threshold for a rising edge differs from that of a falling edge, which suppresses oscillation on slowly-changing signals and rejects noise on the input rail. This places the MC74VHC1G14 within the broader logic-gate hierarchy: inverter → NOT gate → CMOS logic → standard logic IC → semiconductor. Compared to a plain CMOS inverter, the Schmitt input offers a defined switching window specified as VP (positive threshold) and VN (negative threshold) in the datasheet, eliminating the indeterminate behavior of non-hysteretic gates when the input dwells in the transition region. Key features include power-down protection on the inputs, balanced propagation delays, pin- and function-compatibility with other standard logic families, and a chip complexity of fewer than 100 FETs. The Pb-free package is qualified for modern reflow profiles, and the device is characterized over the -55 °C to +125 °C operating range. The MC74VHC1G14 has CMOS-level input thresholds; the MC74VHC1GT14 variant, sharing the same datasheet, offers TTL-level input thresholds for designers bridging from legacy 5 V TTL logic. From an architectural standpoint, the three-stage internal buffer provides high DC gain while the Schmitt input stage sets the hysteresis band. Because it is a single-gate, single-channel part in a sub-2 mm² footprint, the MC74VHC1G14DFT2G is most often used as a 'helper' logic element - one inverter per chip - where board space is at a premium and a multi-channel gate would waste inputs. Typical applications include oscillator and relaxation-timing circuits using an RC network at the input, button/keyboard debouncing, waveform shaping in sensor front-ends, simple logic-level inversion between 1.8 V, 3.3 V, and 5 V rails, and reset/power-good signal conditioning in microcontroller-based designs. The wide 2 V to 5.5 V supply range makes it equally at home on a coin-cell-powered IoT node and a 5 V industrial controller. The low quiescent current of 1 µA preserves battery life in always-on circuits. When designing with this part, observe the maximum input rise/fall-time limits in the datasheet and place a 0.1 µF decoupling capacitor close to the VCC pin. Unused inputs must not be left floating - tie them to VCC or GND through a resistor to prevent shoot-through current and undefined switching. For drop-in replacement of the onsemi part, the TI SN74AHC1G14 and Nexperia 74AHC1G14 share the same pinout and function in compatible packages.

Permintaan RFG Kontak
MC812A4CPVE8 - 16-Bit 8MHz 112-LQFP MCU | NXP
MC812A4CPVE8

MC812A4CPVE8 - 16-Bit 8MHz 112-LQFP MCU | NXP

The NXP MC812A4CPVE8 is a 16-bit CPU12 microcontroller operating at 8 MHz with 1 KB RAM and 4 KB EEPROM in a 112-LQFP 20 mm x 20 mm package. The device combines a CPU12 core, Lite integration module, two asynchronous serial communications interfaces, an SPI interface, timer and pulse accumulation modules, and an 8-bit analog-to-digital converter. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile memory, working memory, peripherals, and communication interfaces. The MC812A4CPVE8 belongs to the broader embedded-control hierarchy: MCU, embedded processor, semiconductor, and electronic component. Its CPU12 architecture is designed for embedded control and uses an intermodule bus to connect standard on-chip modules. Verified listing data identifies the part as an HC12-family 16-bit MCU with an 8 MHz operating frequency, 4 KB EEPROM organized as 4K x 8, and a 112-LQFP package measuring 20 mm x 20 mm. Mouser additionally identifies 1 KB RAM. The product combines serial communications and embedded-control resources suitable for legacy HC12 designs, although the manufacturer page labels it End of Life. The two SCI peripherals provide asynchronous serial communication paths, while SPI supports synchronous peripheral connectivity. The timer and pulse-accumulation resources support event timing and input measurement, and the 8-bit ADC provides analog signal acquisition. Exact electrical limits, memory-map details, ADC performance, and pin-level functions require confirmation in the manufacturer datasheet. Potential uses include industrial control, legacy peripheral controllers, communication bridges, timing modules, and embedded instruments where a CPU12 system is already qualified. The 112-LQFP package offers a substantial pin count but requires a fine-pitch PCB footprint and careful signal-integrity review. Because the NXP product page identifies the device as End of Life, engineers should confirm availability, last-time-buy terms, firmware support, and any approved migration before new production designs. For drop-in planning, verify the exact package drawing, pin multiplexing, memory configuration, oscillator requirements, reset behavior, and peripheral mapping against the selected replacement. A same-footprint MCU is not automatically software- and timing-compatible. The verified cross-reference results identify comparison candidates, but they do not establish a qualified drop-in replacement. This page consolidates distributor availability, package information, lifecycle context, and engineering cautions around this legacy MCU. It does not invent missing electrical specifications or treat generic parametric matches as guaranteed drop-in replacements.

Permintaan RFG Kontak
MC860ENCVR50D4R2 - MPC860 50MHz PowerQUICC MPU 357-BGA | NXP
MC860ENCVR50D4R2

MC860ENCVR50D4R2 - MPC860 50MHz PowerQUICC MPU 357-BGA | NXP

The NXP MC860ENCVR50D4R2 is a PowerQUICC MPC860 32-bit microprocessor clocked at 50 MHz, housed in a 357-ball BGA (PBGA, 25 x 25 mm) package and supplied at 3.3 V I/O. It belongs to the MPC860 communications processor family that integrates a PowerPC core with peripheral and communication subsystems historically used in telecom and industrial networking equipment. A PowerQUICC microprocessor is a communication-centric integrated CPU plus peripheral device that combines a PowerPC processor core with dedicated communication engines (CPM) for protocol handling, UART, SCC, SMC, and memory controllers. Within the broader taxonomy, the MPC860 sits in the hierarchy of microprocessor -> embedded MPU -> communications processor -> PowerQUICC -> semiconductor. It enables designers to consolidate networking, serial, and basic control-plane tasks onto a single die, reducing system complexity compared with separate CPU plus ASIC approaches. Key features include a 32-bit PowerPC core running at 50 MHz, 3.3 V supply operation, a 357-ball Plastic BGA footprint (25 x 25 mm) with 1.27 mm pitch, integrated communications peripheral module (CPM) supporting multiple serial channels, and JTAG/BDM support for boundary scan and on-chip debug. The device is offered in a Tape and Reel packaging format. Per the DigiKey product listing, the device ships in Digi-Reel cut-tape formats directly from manufacturer reels. The MPC860 family uses a power-on reset and PLL subsystem with separate clock domains that allow the CPU and CPM to operate at different rates while sharing peripherals. Internal memory controllers support DRAM, SRAM, and Flash without external glue logic, and a separate PCMCIA/PC Card controller interface is included for legacy I/O expansion. These characteristics matter most in sustained-throughput industrial designs where deterministic serial behavior is required. Typical applications include legacy telecom line-card controllers, industrial serial concentrators and protocol bridges, factory automation gateways, and networking routers and bridges. The wide 3.3 V tolerance and integrated CPM make the part especially attractive when multiple serial channels are required in a small BOM. When designing with this part, plan decoupling carefully: place bulk and high-frequency ceramics as close as possible to each supply ball and ensure a solid ground reference on inner PCB layers. Consider thermal management of the large 25 x 25 mm BGA because the entire device is often board-area-constrained and cannot benefit from airflow. This page synthesizes distributor stock and pricing, drop-in replacement candidates from the MPC860 family, PCB layout guidance, and BGA handling notes that go beyond the manufacturer datasheet alone.

Permintaan RFG Kontak
MC8640DTHX1067NE - Dual-Core PowerPC e600 SoC, 2x1067MHz | NXP
MC8640DTHX1067NE

MC8640DTHX1067NE - Dual-Core PowerPC e600 SoC, 2x1067MHz | NXP

The NXP Semiconductors MC8640DTHX1067NE is a dual-core 32-Bit Power Architecture System-on-Chip (SoC) running at 2x1067MHz, housed in a 1023-ball FCBGA (33x33 mm) package and qualified to the industrial -40C to +105C temperature range. Each core integrates the PowerPC e600 superscalar engine with AltiVec SIMD, and the device exposes DDR1/DDR2 memory controllers, dual GbE MACs, multiple PCI Express lanes, and Serial RapidIO (SRIO) links in a single chip. Per the manufacturer product page, this part is the Rev 3.0 die (G8 stepping) at a 0.95V core voltage. What is a Power Architecture SoC? It is a single integrated circuit that combines one or more CPU cores, a memory controller, and high-speed serial I/O (such as PCIe and SRIO) into one silicon die. Within the broader taxonomy, the MPC8640D belongs to: microprocessor -> embedded MPU -> SoC -> communications processor -> semiconductor. By collapsing what used to be separate northbridge, southbridge, and PHY devices into one BGA, the MPC8640D reduces board area, BOM cost, and latency between cores and I/O for data-plane workloads. Key features include two independent e600 cores with private L1 caches and a shared L2, hardware MMU and floating-point unit per core, dual integrated GbE controllers with on-chip SerDes, integrated DDR1/DDR2 controller with ECC, multi-lane PCI Express and Serial RapidIO fabrics, four-channel DMA, and a wide set of peripheral interfaces (I2C, SPI, UART, GPIO). The 1023-ball FCBGA package supplies the high pin-count needed to expose these parallel and serial interfaces while keeping critical high-speed nets length-matched. Typical applications are wireless baseband/base-station line cards, telecom/datacom routers and switches, defense and aerospace signal processing, networked storage controllers, industrial control and ruggedized computing, and long-life industrial embedded designs that need deterministic multiprocessor performance and rich I/O. The extended -40C to +105C junction range also lets it serve outdoor or sealed enclosures without derating. When designing with this part, follow the NXP reference-design PCB stack-up and length-matching rules for the DDR2 controller, PCIe, and SRIO links - signal-integrity violations on these interfaces are the leading cause of first-spin failures. Allocate a 4-layer (or thicker) stack-up with controlled-impedance traces and stitch the GND/VDD planes under the BGA to provide low-impedance return paths for the high-speed SerDes lanes. This page synthesizes cross-distributor pricing, Rev 3.0 die-step alternatives, and practical layout notes that are not present in the raw manufacturer datasheet - including a side-by-side MC8640 family comparison and industrial-temperature variants.

Permintaan RFG Kontak
MC8640DTVJ1067NE - Dual-Core PowerPC SoC, 2x1067MHz | NXP
MC8640DTVJ1067NE

MC8640DTVJ1067NE - Dual-Core PowerPC SoC, 2x1067MHz | NXP

The NXP MC8640DTVJ1067NE is a dual-core 32-bit Power Architecture system-on-chip (SoC) from the MPC8640D family, integrating two e600 cores running at 1.067 GHz each in a 1023-ball FCCBGA (33x33 mm) package. The device targets embedded networking, telecom, aerospace and defense, storage, and industrial applications requiring deterministic performance, high-bandwidth I/O, and multi-protocol connectivity. It is built on a high-performance PowerPC core with AltiVec SIMD engine and supports DDR1/DDR2 memory with ECC, providing a balanced compute-and-I/O platform for line cards, control-plane processors, and base-station controllers. What is an embedded SoC microprocessor? An embedded SoC microprocessor is a single silicon die that integrates one or more CPU cores, memory controllers, high-speed serial interfaces, and peripheral IP into one package. Within the broader taxonomy, an embedded SoC is a sub-class of microprocessors (MPU) that are designed for headless applications (no display), unlike microcontrollers (MCU) which usually include on-chip Flash and a richer peripheral set. The MPC8640D family is a classic MPU SoC: high-core-clock throughput, large external memory bandwidth, and standards-based serial I/O (PCIe, SRIO, GbE) that allows the same silicon to be reused across compute-intensive platforms. The headline feature set includes dual e600 cores each with AltiVec vector processing, dual integrated Gigabit Ethernet controllers with TCP/IP acceleration, dual PCIe Gen1 interfaces, dual Serial RapidIO (SRIO) ports, dual DDR1/DDR2 memory controllers with ECC, and a complete set of local-bus and DMA engines. Operating temperature is rated -40C to +105C (industrial / extended), and the part is supplied at revision 3 of the silicon. Junction thermal limits and a thermally enhanced FCCBGA package allow deployment in NEBS-compliant telecom platforms and ruggedized industrial systems. Architecturally, the MC8640D shares the e600 core complex with the MPC8641, but the 8640D family is optimized for parallel DSP-like workloads (via AltiVec) and for deterministic inter-core traffic via shared SRAM and coherency fabric. Designers typically pair the SoC with DDR2-667 ECC memory, NOR/NAND Flash via the local bus, and an external PHY for SGMII-attached Gigabit Ethernet. Power is delivered via multiple rails (core 1.05V, DDR 1.8V, I/O 2.5V/3.3V) requiring careful sequencing and decoupling; reference schematics in the NXP hardware reference manual are strongly recommended before layout. Typical applications include embedded networking line cards, telecom base-station baseband controllers, defense/aerospace mission computing, RAID storage controllers, industrial automation controllers, and machine-vision pre-processors. The combination of dual cores, AltiVec SIMD, multi-protocol I/O, and industrial temperature grade makes the device a fit for deterministic real-time workloads where x86 CPUs would consume too much power or board area. Designers should carefully review the 1023-ball FCCBGA escape, which requires HDI PCB (typically 8+ layers with micro-vias) and controlled-impedance routing for DDR, PCIe, SRIO, and SGMII. NXP's hardware reference manual and board design guidelines are essential reading before committing to a layout. JTAG/COP debug access must be reserved on the board for production test and field debug. This page consolidates current distributor pricing, drop-in alternatives, datasheet links, and practical design notes that complement - but do not replace - the official NXP MPC8640D hardware reference manual and reference design package.

Permintaan RFG Kontak
MC8640DTVJ1250HE - Dual-Core 1.25GHz PowerPC e600 SoC | NXP
MC8640DTVJ1250HE

MC8640DTVJ1250HE - Dual-Core 1.25GHz PowerPC e600 SoC | NXP

The NXP MC8640DTVJ1250HE is a dual-core 32-bit PowerPC e600 microprocessor SoC operating at 2 x 1.25 GHz in a 1023-ball FCCBGA (33x33 mm) package, engineered for embedded networking, telecom, aerospace and defense, storage, and industrial computing. It integrates DDR1/DDR2 memory controllers, AltiVec SIMD engine, Gigabit Ethernet MAC, PCI Express, and Serial RapidIO interfaces in a single die. A microprocessor SoC (System-on-Chip) integrates one or more CPU cores, memory controllers, and I/O peripherals onto a single silicon die, replacing what would otherwise require a discrete chipset. The MC8640D family sits in the high-performance tier of NXP's PowerPC QorIQ portfolio, providing a multi-core embedded computing platform for line-rate packet processing and signal aggregation where deterministic performance and long-life industrial-grade reliability are mandatory. Key features include two PowerPC e600 cores with AltiVec vector processing, integrated DDR1/DDR2 controller with ECC, four Gigabit Ethernet ports, dual PCI Express controllers, dual Serial RapidIO ports, dual DMA engines, and -40C to +105C industrial operating temperature range. The 1023-ball FCCBGA package provides high I/O density required for the integrated peripheral set. Architecturally, the MC8640D leverages the e600 core, which combines a 32-bit PowerPC instruction set with AltiVec SIMD extensions, delivering strong performance per watt for data-plane workloads. The integrated northbridge-style memory controller reduces external chipset cost and latency, while the high-bandwidth SerDes fabric supports multiple concurrent high-speed links. Typical applications include embedded networking routers and switches, telecom base-station controllers, aerospace and defense signal-processing platforms, RAID storage controllers, industrial automation, and high-performance computing appliances. The wide industrial temperature range and long-term NXP product support make it suitable for long-life programs requiring 10+ year supply continuity. When designing with the MC8640DTVJ1250HE, allocate proper PCB layer count for the FCCBGA escape routing - typically 8 to 12 layers with microvia stackups - and provide matched-length impedance control for the SerDes lanes. The industrial-grade junction temperature window permits fanless or conduction-cooled deployments. This page consolidates distributor pricing, drop-in alternative cross-references, and practical design guidance not found in the manufacturer datasheet alone, helping engineers verify second sources and design-in decisions for long-lifecycle embedded systems.

Permintaan RFG Kontak
MC8640DVU1000HE - Dual-Core 1GHz PowerPC SoC, 1023-FCBGA | NXP
MC8640DVU1000HE

MC8640DVU1000HE - Dual-Core 1GHz PowerPC SoC, 1023-FCBGA | NXP

The NXP MC8640DVU1000HE is a 32-bit dual-core PowerPC e600 microprocessor SoC integrating two cores running at 1.0 GHz, fabricated in a 1023-pin FCCBGA (33x33 mm) package. The device is part of NXP's MPC8640D family, engineered for breakthrough performance, connectivity, and integration for embedded networking, telecom, aerospace and defense, industrial, and pervasive computing workloads. A microprocessor SoC (System-on-Chip) integrates the CPU cores, memory controller, and high-speed serial I/O into a single die. The MC8640 line, based on the PowerPC e600 architecture, extends the PowerQUICC III family with dual e600 cores, on-chip DDR1/DDR2 memory controller, Gigabit Ethernet MACs, PCI Express, Serial RapidIO (SRIO), and AltiVec SIMD vector processing. It belongs to the PowerQUICC > MPC86xx > MPC8640D > embedded microprocessor > SoC hierarchy used widely in carrier-grade and defense systems where deterministic compute and high-throughput I/O are mandatory. Key features include 2x e600 cores at 1.0 GHz with AltiVec vector unit, a 64-bit DDR1/DDR2 memory controller with ECC, dual Gigabit Ethernet, PCI Express (x4/x8 lanes), Serial RapidIO, and a 1.05 V core supply. Industrial-grade 0 to 105 °C operating temperature, hardware virtualization support, and integrated security/cryptographic accelerators (SEC 3.0) make this part suited to secure, multi-tenant embedded platforms. The 1023-FCCBGA package exposes the full high-bandwidth I/O while supporting industrial thermal envelopes. Architecturally, the MC8640DVU1000HE pairs two out-of-order e600 cores with a 1 MBx3 (BackSide) L2 cache per core, an MPX coherency fabric, and a multi-protocol serial I/O engine. The integrated memory controller supports up to DDR2-667 with ECC, sufficient for line-rate packet processing on the dual GbE MACs and the Serial RapidIO fabric. This is a Rev 3 silicon revision, distinguishing it from earlier stepping parts in the family. Typical applications include embedded networking line cards (router/switcher applications), aerospace and defense avionics, telecom base-station control-plane processing, secure storage controllers, and military-grade signal-processing nodes. The combination of dual-core throughput, hardware encryption, and deterministic boot makes it suited to mission-critical deployments. When designing with this device, ensure the PCB can deliver the high-current 1.05 V core rail (multiple decoupling phases required) and provide matched-length routing for DDR2 and Serial RapidIO links. The 33x33 mm FCCBGA requires high-layer-count (12+ layer) PCBs with microvia stacks for breakout. This page synthesizes distributor pricing, drop-in alternatives within the MPC8640D family, and practical thermal/PCB design notes beyond the manufacturer datasheet to support engineering decision-making.

Permintaan RFG Kontak
MC8640DVU1250HE557 - QorIQ 1.25GHz Multi-Core Processor | NXP
MC8640DVU1250HE557

MC8640DVU1250HE557 - QorIQ 1.25GHz Multi-Core Processor | NXP

The NXP (formerly Freescale) MC8640DVU1250HE557 is a multi-core Power Architecture integrated host processor from the QorIQ family, operating at 1.25 GHz with a 1.05 V core voltage and rated for extended-temperature environments up to 105 C. Housed in a high-density surface-mount BGA package, this part targets embedded compute applications such as networking, storage, defense/aerospace, and industrial control. An integrated host processor (also called an application processor or communications processor) is a single-chip computing subsystem that integrates one or more CPU cores, cache, memory controllers, and high-speed serial I/O on a single silicon die. In the QorIQ hierarchy, the MC8640 belongs to the Power Architecture-based family that sits between discrete CPU-plus-chipset designs and full system-on-chip (SoC) devices, delivering deterministic performance for data-plane workloads while retaining the flexibility of a programmable architecture. Key specifications include a 1.25 GHz core frequency, dual Power Architecture e600 cores, integrated L1/L2 cache, dual DDR2 memory controllers, and high-speed serial interfaces (SerDes) supporting protocols such as PCI Express, Serial RapidIO, and Gigabit Ethernet. The 'E557' suffix denotes the 105 C extended-temperature grade and specific revision/bin of the silicon, while 'H' indicates lead-free assembly and 'VU' designates the package code. The part ships in tray packaging suitable for high-mix, low-volume OEM production. Architecturally, the MC8640 leverages a coherent dual-core fabric with on-chip MPX bus connectivity, allowing both cores to share memory and I/O coherently. This makes the part attractive for symmetric multiprocessing (SMP) workloads such as packet processing, encryption offload, and protocol termination. The 1.05 V core voltage reflects the 90 nm CMOS process used for this generation of QorIQ devices. Typical applications include enterprise and edge routers, network-attached storage (NAS), print/image controllers, military and aerospace single-board computers, and industrial automation controllers. The 105 C temperature rating extends usability into outdoor telecom and industrial environments where commercial-grade processors would otherwise derate or fail. When designing with the MC8640, ensure the PCB footprint accommodates the high-density BGA ball pattern and provides adequate thermal dissipation via copper pour or heatsink attachment. Decoupling capacitors must be placed as close as practical to each power pin, and SerDes reference clock routing must follow the impedance and length-matching guidelines in the hardware specifications addendum. This page synthesizes distributor pricing, lifecycle status, and drop-in compatible QorIQ variants not consolidated on the original NXP datasheet, giving engineers a single reference for sourcing and re-design decisions.

Permintaan RFG Kontak
MC8640TVU1250HE - 1.25GHz PowerPC e600 SoC MPU | NXP
MC8640TVU1250HE

MC8640TVU1250HE - 1.25GHz PowerPC e600 SoC MPU | NXP

The NXP MC8640TVU1250HE is a 32-bit Power Architecture system-on-chip (SoC) microprocessor built on the PowerPC e600 core, delivering a 1.25 GHz core clock in a 1023-ball C-BGA (FCCBGA 33x33) package. Designed as a single-core member of the MPC8640/MPC8640D family, it integrates DDR1/DDR2 memory I/O, dual Gigabit Ethernet MACs, PCI Express, and Serial RapidIO (SRIO) interfaces onto a single die for embedded networking, telecom, aerospace/defense, and industrial applications. The device operates across industrial temperature ranges and supports the e600 core's AltiVec SIMD engine. A microprocessor (MPU) is the central processing unit of an embedded computing system, typically implemented as a single IC containing one or more CPU cores, cache subsystems, memory controllers, and peripheral interfaces. The MPC8640 family occupies the high-performance tier of NXP's embedded PowerPC portfolio, sitting above the MPC8572 line and below the multi-core P-series communications processors. By integrating the memory controller, multiple high-speed serial links, and Ethernet MACs on-chip, the MC8640TVU1250HE reduces board complexity compared with multi-chip solutions that pair a CPU with a separate northbridge/IO controller. Key features include 1.25 GHz e600 core frequency with AltiVec vector processing, dual GbE controllers, hardware-accelerated cryptography and pattern matching engines, integrated DDR1/DDR2 memory controller with ECC, two PCI Express interfaces, four Serial RapidIO ports, and dual I2C, SPI, and UART peripherals. The device operates from multiple supply rails (1.05 V core, 1.8 V/2.5 V/3.3 V I/O) and is qualified for -40 to +105C industrial temperature grades. The 994-ball FCCBGA package provides a thermal envelope suitable for conduction-cooled ruggedized deployments. The MC8640TVU1250HE is built on a 130 nm CMOS process, giving it the GHz-class single-thread performance characteristic of the e600 microarchitecture while maintaining deterministic interrupt latency required for telecom control plane applications. Hardware-assisted table lookup and pattern-match engines offload ACL/Firewall workloads from the CPU, and the integrated security engine accelerates IPsec, SSL, and bulk-encryption flows. Typical applications include embedded networking line cards, base-station baseband controllers, secure routers, military/aerospace mission computers, RAID storage controllers, and industrial control servers. The combination of AltiVec and DDR2 controller makes the device well-suited to packet processing and image-processing workloads. When designing with this part, allocate generous copper area beneath the FCCBGA and use a thermal interface material rated for the application's temperature range. Follow NXP hardware reference manual guidance for SerDes reference clock jitter and impedance-controlled routing of PCI Express and Serial RapidIO lanes. This page consolidates distributor stock, parametric benchmarks, and drop-in upgrade paths from the MPC8640/MPC8641/MPC8640D families - practical engineering context not assembled in any single vendor datasheet.

Permintaan RFG Kontak
MC8641DHX1333JE - Dual-Core PowerPC e600 SoC 1.333GHz | NXP
MC8641DHX1333JE

MC8641DHX1333JE - Dual-Core PowerPC e600 SoC 1.333GHz | NXP

The NXP MC8641DHX1333JE is a dual-core 32-bit PowerPC e600 system-on-chip (SoC) running at 1.333 GHz, packaged in a 1023-ball FC-CBGA (33 x 33 mm) and targeted at 0 to 105 °C industrial/embedded applications. It integrates two superscalar e600 cores built around a compact 7-stage pipeline with three-issue dispatch, and adds on-chip AltiVec SIMD acceleration, DDR1/DDR2 memory controllers, multi-gigabit Ethernet MACs, PCI Express, and Serial RapidIO for high-bandwidth networking. A Power Architecture SoC is a single integrated circuit that combines one or more processor cores, memory controllers, peripheral I/O, and interconnect fabric into a single silicon die. In the broader taxonomy this places the MPC8641D in the family of embedded multiprocessors, a category that includes communications processors, network SoCs, and high-performance industrial MPUs. The e600 core line itself evolved from the PowerPC 74xx series and is the basis for Freescale/NXP's QorIQ and PowerQUICC III families, which remain widely deployed in long-life-cycle infrastructure equipment. Key features of the MC8641DHX1333JE include the dual e600 cores running at 1.333 GHz with hardware-managed coherency, dual-channel DDR/DDR2 memory controllers with ECC, two Enhanced Three-Speed Ethernet (eTSEC) MACs supporting 10/100/1000 Mbps, integrated PCI Express and Serial RapidIO (SRIO) interfaces, and AltiVec vector processing for compute-intensive DSP-style workloads. The device operates from a 1.05 V core supply, supports 32-bit Power Architecture instruction set, and is rated for the extended 0 to 105 °C industrial temperature range. Typical applications for this SoC include multi-gigabit networking line cards, industrial control routers, software-defined radio baseband processing, telecom switching fabrics, and defense/aerospace embedded compute modules. The combination of AltiVec, dual GbE, and high-speed serial interfaces makes the part particularly attractive for legacy infrastructure that still requires deterministic PowerPC behavior and long-term component availability through NXP's product longevity commitments. When designing with this part, pay close attention to PCB layout for the FC-CBGA-1023 package; the 33 x 33 mm substrate requires multilayer BGA escape routing, controlled-impedance SERDES traces, and matched-length clocks. Thermal management is critical at 1.333 GHz - a heatsink is mandatory, and the board should provide 2 oz copper on outer layers under the BGA for spreading. The DDR2 memory interface must be length-matched within tight skew tolerances per NXP application notes. This page aggregates distributor pricing, drop-in alternatives within the MPC8641D/MPC8640D family, and design notes that go beyond the manufacturer datasheet summary - useful for engineers qualifying the part into long-life programs.

Permintaan RFG Kontak
MC8641DTHX1333JE - PowerPC e600 Dual-Core 1.333GHz MPU | NXP
MC8641DTHX1333JE

MC8641DTHX1333JE - PowerPC e600 Dual-Core 1.333GHz MPU | NXP

The NXP MC8641DTHX1333JE is a dual-core PowerPC e600 microprocessor from the MPC86xx family, operating at 1.333 GHz with a 32-bit data path and housed in a 1023-ball FCCBGA (33x33 mm) package. It integrates dual e600 cores, DDR/DDR2 memory controllers, dual 10/100/1000 Ethernet controllers, and high-speed serial interfaces for embedded compute and networking. What is an MPC86xx MPU? The MPC86xx family is a line of high-performance PowerPC-based microprocessors originally developed by Freescale Semiconductor (now NXP). They are designed for embedded computing workloads such as networking line cards, storage controllers, and industrial automation, where deterministic performance and multi-core parallelism are required. As a dual-core PowerPC device, the MC8641 belongs to the broader microprocessor (MPU) product category and falls under the embedded processing taxonomy. Key features of the MC8641DTHX1333JE include 2 cores at 1.333 GHz, integrated DDR/DDR2 memory controllers, dual Gigabit Ethernet MACs, on-chip high-speed serial peripherals, and a low core voltage of 0.95V. The -40C to +105C operating range supports industrial and extended-temperature deployments. Its large FCCBGA-1023 package provides the signal density needed for the multi-channel I/O and memory interfaces. The e600 core is a superscalar PowerPC implementation with out-of-order execution, hardware MMU, and large L2 cache support. The dual-core configuration delivers parallel compute throughput suitable for packet processing and real-time control. Per the verified web data, this part is the G8 silicon revision (REV 3.0), which informs firmware and errata considerations. Typical applications for this MPU include networking routers and switches, line cards, storage controllers (RAID/SAN), industrial automation controllers, and embedded telecom platforms. The combination of dual cores, integrated Ethernet, and DDR2 controllers reduces BOM and board complexity in these compute-dense systems. When designing with the MC8641DTHX1333JE, ensure adequate thermal dissipation for the FCCBGA package and follow NXP layout guidelines for high-speed DDR2 routing. Note that the part is listed as Obsolete (per verified web data) and uses tin/lead (Sn/Pb) terminal finish, making it unsuitable for new RoHS-only builds. For new designs, evaluate the available NXP MPC86xx inventory and consider functional alternatives carefully. This page consolidates verified distributor pricing, drop-in alternatives from the MPC86xx family, and design considerations specific to high-performance PowerPC MPUs to help engineers evaluate this part for legacy and after-market scenarios.

Permintaan RFG Kontak
MC8641DTVU1000GE - Dual-Core 1GHz PowerPC SoC | NXP
MC8641DTVU1000GE

MC8641DTVU1000GE - Dual-Core 1GHz PowerPC SoC | NXP

The NXP MC8641DTVU1000GE is a dual-core 32-bit Power Architecture system-on-chip (SoC) built on the e600 superscalar core, operating at 1.0 GHz in a 1023-ball FCCBGA (33x33) package with a 1.05V core supply and 0.95V VID variant. The part integrates two e600 cores, each with a three-issue 7-stage pipeline and AltiVec SIMD engine, delivering high IPC for networking, storage, and embedded control workloads. The e600 (and parent PowerPC 600 series) is a superscalar 32-bit processor family historically used in Power Mac, PowerQUICC, and high-end embedded designs; the MPX86xx SoC line integrates two e600 cores with northbridge/host fabric logic, DDR1/DDR2 memory controllers, GbE MACs, PCI Express, and Serial RapidIO, simplifying board design versus a discrete CPU + chipset. This positions the part for routers, switches, line cards, storage controllers, and industrial imaging pipelines where deterministic performance and rich I/O are required. Key features include dual e600 cores at 1.0 GHz, integrated DDR1/DDR2 memory controller with ECC, integrated Gigabit Ethernet (GbE), PCI Express and Serial RapidIO (SRIO) fabrics, AltiVec SIMD unit per core for vector math, and a 1.05V core rail (0.95V VID variant denoted in the part number). According to the datasheet headline, the operating junction temperature is -40C to +105C and the device is from Revision 3.0 of the silicon. The 1023-ball FCCBGA (33x33 mm) package requires high-density PCB layout and matched-impedance routing for the SerDes lanes. Typical applications include enterprise networking line cards, RAID/HBA controllers, telecom baseband co-processors, industrial machine-vision pipelines using AltiVec SIMD, and military/aerospace embedded compute. Designers value the part for the deterministic core architecture, mature toolchain (PowerPC GCC, Wind River VxWorks, Green Hills INTEGRITY), and integrated I/O that removes the need for an external northbridge. When designing in this part, pay close attention to the multi-rail decoupling scheme (1.05V VDD core, 1.8V/2.5V/3.3V I/O), SerDes reference clock jitter, and DDR2 termination topology. The part is now in mature/legacy lifecycle status; sourcing via authorized stockists or franchised distributors is required for new designs.

Permintaan RFG Kontak
MC8641DTVU1000GE557 - PowerPC e600 1GHz 2-Core MPU | NXP
MC8641DTVU1000GE557

MC8641DTVU1000GE557 - PowerPC e600 1GHz 2-Core MPU | NXP

The NXP MC8641DTVU1000GE557 is a dual-core PowerPC e600 microprocessor running at 1.0 GHz, housed in a 1023-ball FCCBGA (33x33) package with 1.05 V core supply. It belongs to the MPC86xx family and integrates two 32-bit e600 cores with AltiVec vector processing, integrated DDR1/DDR2 memory controller, and high-speed serial interfaces. The part is shipped as a tray (bulk) variant per the supplier suffixes used in the part number. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating systems, control code, and signal-processing workloads. The MC8641 family sits within the PowerPC architecture lineage that NXP (formerly Freescale) has produced for telecom, networking, and aerospace applications. Within the system hierarchy, an MPU integrates core CPU execution, cache, memory control, and peripheral I/O on a single die, distinguishing it from microcontrollers (MCU) that emphasize on-chip flash and peripherals. Key specifications of the MC8641DTVU1000GE557 include dual 32-bit PowerPC e600 cores, 1.0 GHz core frequency, 1.05 V core voltage, integrated DDR1/DDR2 memory controller, dual GbE, PCI Express, and Serial RapidIO interfaces, and an operating temperature range up to 105 °C. The 1023-ball FCCBGA package provides high pin density required for the multi-channel memory and serial I/O interfaces. The architecture combines dual superscalar e600 cores with on-chip L1/L2 caches and AltiVec SIMD engine, supporting parallel workloads in networking and signal processing. Hardware-assisted coherency between cores is handled through on-die logic, and the integrated memory controller reduces system latency by removing external northbridge components. Typical applications include high-performance networking equipment, telecom baseband processing, industrial control, military and aerospace embedded computing, and data-acquisition systems. The combination of dual-core processing, AltiVec acceleration, and high-speed serial interfaces makes it suitable for line-card designs and protocol-offload engines. When designing with this device, ensure proper thermal management for the FCCBGA - the high pin count combined with multi-watt dissipation requires a multi-layer PCB with adequate copper and thermal vias. Validate DDR signal integrity through the routing guidelines in the manufacturer hardware reference manual before committing to layout. This page synthesizes distributor availability, parametric data, and substitute guidance for the MC8641DTVU1000GE557, consolidating information not available in any single manufacturer document.

Permintaan RFG Kontak
MC8641DVJ1333JE - Dual e600 SoC, 2x1333 MHz, Rev 3 | NXP Semiconductors
MC8641DVJ1333JE

MC8641DVJ1333JE - Dual e600 SoC, 2x1333 MHz, Rev 3 | NXP Semiconductors

The NXP Semiconductors MC8641DVJ1333JE is a 32-bit Power Architecture system-on-chip (SoC) featuring two e600 superscalar cores running at 1333 MHz, integrated memory and I/O controllers, and a 1023-ball FCCBGA package measuring 33x33 mm. It belongs to the MPC8641D family (Rev 3 silicon) and targets high-performance embedded compute applications that require multi-core PowerPC processing, DDR1/DDR2 memory, Gigabit Ethernet, PCI Express, and Serial RapidIO on a single die. What is a Power Architecture SoC? A Power Architecture SoC integrates one or more PowerPC CPU cores with memory controllers, high-speed serial interfaces, and peripheral IP onto a single chip. The e600 core uses the Power Architecture Book E instruction set, extends it with AltiVec SIMD, and is widely deployed in networking, storage, defense, and industrial embedded applications where deterministic performance and long-term software reuse matter more than raw peak clock speed. Within the broader taxonomy, MC8641DVJ1333JE sits as: e600 core -> PowerPC MPC86xx dual-core SoC -> 32-bit Power Architecture SoC -> embedded microprocessor -> integrated circuit. Key device-level features include dual e600 cores at 1333 MHz with AltiVec SIMD, a 7-stage superscalar pipeline with three-issue dispatch, an integrated DDR1/DDR2 memory controller with ECC, dual Gigabit Ethernet MACs, PCI Express interface, Serial RapidIO (SRIO), and an operating temperature range of 0°C to +105°C for industrial-grade environments. The 1023-ball FCCBGA package exposes the full high-speed I/O complement while preserving signal integrity for multi-gigabit SerDes lanes. Architecturally, the MPC8641D pairs two e600 cores with a shared L2 cache topology and a coherent fabric, enabling symmetric multiprocessing (SMP) on a single chip. Hardware virtualization helpers and a dedicated DMA engine accelerate packet processing in networking line cards, while AltiVec boosts DSP-class workloads such as voice transcoding, image manipulation, and cryptographic primitives in software. Compared with discrete CPU-plus-chipset designs, this SoC consolidates the memory controller and I/O bridge on-die, reducing board area, BOM cost, and power envelope for embedded platforms. Typical applications include multi-service routers and switches (PCIe to SRIO fabric bridging), industrial automation controllers running VxWorks or Linux, military/aerospace compute modules requiring long-life silicon, RAID/NAS storage controllers with AltiVec-accelerated RAID parity, and defence-grade signal processing cards. The dual-core 1333 MHz configuration handles wire-speed packet inspection, encryption, and control-plane workloads on a single board. When designing with this device, ensure the PCB supports 1023-ball BGA routing with matched-length SerDes lanes for PCI Express and Serial RapidIO. Provide adequate decoupling and thermal dissipation - the FCCBGA package requires a heatsink or cold plate under sustained load. Use NXP's board-support packages (BSP) and U-Boot for early bring-up.

Permintaan RFG Kontak
MC8641DVU1000GE - Dual 1GHz e600 SoC, 1023-FCBGA | NXP
MC8641DVU1000GE

MC8641DVU1000GE - Dual 1GHz e600 SoC, 1023-FCBGA | NXP

The NXP MC8641DVU1000GE is a 32-bit Power Architecture dual-core microprocessor SoC integrating two e600 superscalar cores running at 1.0 GHz, housed in a 1023-ball FCCBGA package (33 x 33 mm). The device combines the dual e600 CPUs with a Northbridge complex that includes DDR1/DDR2 memory controller, four Gigabit Ethernet MACs, dual PCIe interfaces, dual Serial RapidIO (SRIO) interfaces, and the AltiVec SIMD vector unit, delivering a complete compute, memory and I/O subsystem on a single die. What is a dual-core Power Architecture SoC? A SoC (System-on-Chip) integrates CPU cores, memory controllers, and high-speed I/O into one silicon device, replacing what previously required a separate CPU, chipset, and I/O bridge. The MPC86xx family extends the classic PowerPC e600 core into multi-core, integrated variants, positioning the SoC above discrete microprocessor solutions and below ASSPs in the embedded-compute hierarchy: MPU -> embedded MPU -> SoC -> multiprocessor SoC. This makes the MC8641DVU1000GE ideal for designs that previously required two companion I/O bridge chips. Key features include two e600 cores each issuing up to three instructions per cycle through a compact 7-stage pipeline, hardware virtualization support, 32 KB L1 instruction and data caches per core, a unified 1 MB backside L2 cache, integrated DDR1/DDR2 controller with ECC, four 10/100/1000 Mb/s Ethernet MACs, two x4 PCIe endpoints/RCs, two Serial RapidIO ports, and a Security Engine for accelerated cryptography. The e600 core's AltiVec unit performs 128-bit vector operations, making the SoC well suited to signal-processing workloads. The architecture integrates the memory controller and I/O bridges directly onto the die, reducing board complexity and BOM versus discrete MPU+bridge designs. Voltage is 1.05 V core, with separate rails for I/O and DDR. Thermal envelope is 0 to 105 C junction. Part number suffix conventions: 'D' denotes dual-core, 'V' denotes the standard speed grade, 'U' denotes the FCBGA package, '1000' is the 1.0 GHz core frequency, 'G' indicates Pb-free, and 'E' is the extended temperature grade. Typical applications include industrial routers and switches, defense/aerospace signal processing, telecom line cards, medical imaging, military/aerospace embedded compute, and high-end imaging. The dual GbE and dual SRIO ports specifically suit line-card and base-station designs where multiple deterministic fabrics are required. When designing with the MC8641DVU1000GE, allocate generous PCB area for the 33 x 33 mm FCBGA, follow NXP layout guidelines for DDR2 trace matching, and provide adequate bulk decoupling near each power rail. Signal integrity on the SRIO and PCIe links requires controlled-impedance routing and length matching per the device reference manual. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design notes not found in a single datasheet chapter.

Permintaan RFG Kontak
MC8641DVU1000NE557 - MPC8641 Dual-Core 1GHz PowerPC SoC | NXP
MC8641DVU1000NE557

MC8641DVU1000NE557 - MPC8641 Dual-Core 1GHz PowerPC SoC | NXP

The NXP (formerly Freescale) MC8641DVU1000NE557 is a multi-core integrated host processor from the MPC8641 family, integrating dual e600 PowerPC cores running at 1.0 GHz with a 32-bit architecture in a 1023-ball FCCBGA package measuring 33 mm by 33 mm. The part is part of the older NXP/Freescale PowerQUICC III / Power Architecture host processor family and targets embedded compute, networking, and storage workloads that require a self-contained SoC with on-die memory and I/O controllers. Integrated host processors (also called application processors or SoCs) combine one or more CPU cores, a high-bandwidth system bus, on-chip SRAM and L1/L2 caches, a memory controller, and a wide range of I/O peripherals onto a single die. In the broader taxonomy, an SoC sits at the top of the embedded compute hierarchy: CPU core -> SoC -> MPU/MCU -> semiconductor device. The MPC8641 sits in the high-performance tier, supporting legacy Power Architecture software while consolidating northbridge, southbridge, and I/O functions. Key features include dual 32-bit e600 cores at 1.0 GHz, on-die L1/L2 caches, integrated DDR2 memory controller, dual Gigabit Ethernet MACs (via SerDes), PCI Express interfaces, and RapidIO fabric. The 'DVU' suffix denotes a specific FCCBGA package and industrial temperature grade, while '1000NE' denotes the 1.0 GHz core speed and the '557' suffix denotes tape-and-reel packaging and lead-free compliance per NXP ordering information. Architecturally, the MPC8641 uses a coherent CoreNet fabric on-die that links the e600 cores, L2 cache, DMA engines, and high-speed I/O. This fabric provides higher sustained throughput than older SMP/MPC shared-bus topologies, enabling line-rate packet processing on both cores. The device also integrates hardware acceleration for buffer management and queue management used in networking firmware stacks. Typical applications include enterprise routers and switches, line-card controllers in telecom equipment, RAID/HBA storage controllers, industrial automation controllers, and defense/aerospace compute modules. The FCCBGA-1023 package provides the thermal headroom needed to sustain 1.0 GHz dual-core operation at industrial temperature ranges. When designing with the MPC8641, pay close attention to power sequencing (core and I/O rails must come up in a specific order), DDR2 termination and trace length matching, and junction temperature under sustained dual-core load. A multi-layer PCB with continuous power and ground planes and a thermal management strategy (heatsink plus airflow) is required because the FCCBGA package has a relatively low theta-JA compared to plastic BGA packages. This page synthesizes distributor pricing, lifecycle signals, and practical design considerations drawn from NXP/Freescale documentation and authorized distributor listings; it is not a substitute for the official NXP hardware specifications document.

Permintaan RFG Kontak