onsemi

MC74F283N - 4-Bit Fast-Carry Full Adder | onsemi

MPN: MC74F283N ✗ Akhir Hidup
5.5 V Vdss 16-DIP Package
MOQ: 1 |

MC74F283N Ringkasan

The onsemi MC74F283N is a 4-bit binary full-adder integrated circuit with fast carry, designed for arithmetic logic and digital counter applications. The device operates from a 5.5 V supply and is packaged in a 16-pin DIP. Its four parallel operand inputs, sum outputs, and carry inputs and outputs support conventional binary addition and subtraction when paired with appropriate logic inversion.

A full adder is a combinational digital-logic building block that adds two binary operands and an incoming carry bit, producing one sum bit and one carry-out bit. Four full-adder stages combined in one IC provide a practical 4-bit adder subsystem. The MC74F283N belongs to the MC74F logic family and is positioned as a high-speed logic function for applications requiring more propagation performance than older LS-series devices.

The MC74F283N provides four independently addressed sum outputs, four operand inputs for each addition stage, and carry connections that can be cascaded with additional adder packages. Fast carry reduces the delay between adjacent bit stages, which is important in synchronous counters, arithmetic units, address-generation logic, test equipment, and control systems where timing margin is limited.

The 16-DIP package supports conventional through-hole PCB assembly and prototyping. Because the device exposes its arithmetic signals directly, system designers must account for signal fan-out, input transition times, unused inputs, and propagation delay when constructing clocked or cascaded arithmetic networks. The 5.5 V supply requirement is a key selection criterion for systems designed around classic TTL-compatible logic families.

Typical uses include binary counters, digital accumulators, frequency-division and sequencing circuits, arithmetic control units, instrumentation, industrial automation, and educational logic systems. A multi-package implementation can extend the adder width beyond four bits by connecting the carry output of one MC74F283N to the carry input of the next package.

For a new design, verify the complete pin assignment, propagation-delay limits, supply-current behavior, and input requirements in the manufacturer datasheet before finalizing PCB routing or system timing. The DIP footprint also makes this device particularly convenient where component insertion, inspection, repair, or manual prototyping is preferred over compact surface-mount assembly.

Alternatif penggantian untuk MC74F283N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

DM74LS283N

✅ Drop-In
📦 16-PDIP
Same 4-bit fast-carry adder function and 16-pin DIP format; LS-family timing differs from the F-family target

📋 Alternatif referensi (tidak dalam katalog)

SN74LS283

✅ Drop-In
📦 16-PDIP
Same 4-bit binary full-adder function and 16-pin through-hole format; LS-family propagation timing differs from MC74F283N

📋 Alternatif referensi (tidak dalam katalog)

CD74HCT283

✅ Drop-In
📦 16-PDIP
Same 4-bit full-adder function and 16-pin through-hole format; HCT-family electrical and timing characteristics differ from F-series

📋 Alternatif referensi (tidak dalam katalog)

MC74F283N Rating Maksimal & Karakteristik Listrik

Fungsi 4-bit binary full adder with fast carry
Logic Family MC74F
Tegangan Pemuat 5.5 V
Data Width 4 bits
Package Type 16-DIP
Jumlah Pin 16 pins
Carry Architecture Fast carry
Logic Type Combinational logic
Arithmetic Function Binary addition
Tipe Mounting Through-hole
Manufacturer onsemi

MC74F283N 16-dip Diamant Konfigurasi Panduan

Konfigurasi pin untuk MC74F283N (16-dip pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 16-dip untuk MC74F283N

Tidak ada data diatribut pin yang tersedia untuk MC74F283N.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MC74F283N cocok untuk 6 aplikasis: Binary Counter Accumulator, Industrial Arithmetic Control, Frequency Divider and Sequence Logic, Digital Instrumentation Front End, Address Generation Logic, Logic Education and Prototyping.

🖥️

Binary Counter Accumulator

The MC74F283N fits counter and accumulator designs because it combines four binary full-adder stages in one 16-DIP IC. Its fast-carry architecture supports arithmetic between a current count and an operand, while its parallel sum outputs make the result available to subsequent digital logic. A design can use the carry and sum signals to form an incrementing, decrementing, or programmable counting system. Timing closure remains important because the system must meet the propagation-delay limits of the selected logic family and the load presented by the following stage.

🏭

Industrial Arithmetic Control

The MC74F283N is appropriate for industrial arithmetic-control blocks where a compact, dedicated adder is preferable to implementing four full-adder functions from basic gates. The 4-bit width matches common nibble-oriented control buses, and the dedicated fast-carry path simplifies the implementation of multi-stage arithmetic. In a machine-control design, the outputs can represent an error count, setpoint difference, or step-index value. The onsemi device’s 5.5 V supply and 16-DIP package make it most suitable where through-hole assembly and classic logic-family integration are already established.

📡

Frequency Divider and Sequence Logic

The MC74F283N can participate in frequency-division and sequencing circuits by adding binary states or establishing carry-dependent transitions. Four internal full-adder stages allow multiple bits to be processed together, reducing the number of packages needed for parallel arithmetic. A designer may connect the sum outputs to programmable or fixed logic and use the carry output as a state-transition qualifier. Because this is combinational logic, any registered output must be paired with appropriate clocking circuitry, and propagation delay must be included when deriving the maximum operating frequency.

🔧

Digital Instrumentation Front End

The MC74F283N is suitable for digital instrumentation that performs binary addition on measurement, status, or calibration data. The 4-bit adder provides a straightforward way to combine two nibbles and determine whether a carry was generated, which can support threshold comparison, decade-counter arithmetic, or error-offset calculations. Its fast-carry function helps minimize delay within the arithmetic path, while the DIP package simplifies serviceable instrument boards. Signal-conditioning, input levels, grounding, and timing must still be designed around the datasheet limits of the MC74F family.

💻

Address Generation Logic

The MC74F283N can be used in address-generation or offset-calculation logic where a 4-bit addition result is needed. Designers can add a base address nibble to a programmable offset and use the carry output to propagate a boundary into another arithmetic stage. This approach is useful in compact legacy control systems, address decoders, and educational processor subsystems. The device’s dedicated adder function reduces gate-level design effort, and its 16-DIP footprint allows direct insertion into existing through-hole prototyping boards. Cascading with additional adder packages supports wider address arithmetic.

🧩

Logic Education and Prototyping

The MC74F283N is well suited to laboratory and educational prototyping because it exposes a complete four-bit adder with carry in a conventional 16-DIP package. Students can demonstrate binary addition, subtraction through logic inversion, carry propagation, cascaded arithmetic, and synchronous counter behavior using visible breadboards or training boards. The dedicated fast-carry path makes propagation observations easier than a gate-level implementation. Logic analyzers can be connected to the sum and carry lines for timing studies, while the device’s through-hole construction supports rework and replacement in instructional systems.

What is the MC74F283N?
The MC74F283N is an onsemi 4-bit binary full-adder IC with fast carry, specified for operation from a 5.5 V supply in a 16-pin DIP package. It combines four full-adder stages into one logic IC, providing sum outputs and carry connections for binary arithmetic. The manufacturer datasheet and the onsemi product listing identify the device as a specialized binary full adder with fast carry.
What is the operating voltage of MC74F283N?
The MC74F283N is identified as a 5.5 V logic device in the onsemi product information. Its 5.5 V supply is an important selection constraint for systems using classic TTL-compatible logic families. Exact input and output voltage thresholds are listed in the manufacturer datasheet, while the confirmed package is a 16-DIP.
Where can I download the MC74F283N datasheet PDF?
The MC74F283N datasheet can be accessed through the onsemi Octopart datasheet page at https://octopart.com/datasheet/onsemi/MC74F283N. The part is described as an MC54/74F-family 4-bit binary full adder with fast carry. Use the manufacturer datasheet for authoritative pin assignments, timing limits, supply-current limits, and operating-condition details.
Where can I find the MC74F283N pinout?
The MC74F283N pin assignment should be taken from the manufacturer datasheet because the device is housed in a 16-DIP package. The confirmed package has 16 physical positions, but the individual pin names and numbering are not reproduced in the available product text. The datasheet linked from https://octopart.com/datasheet/onsemi/MC74F283N should be used for PCB routing and logic-symbol verification.
What applications use the MC74F283N?
The MC74F283N is suitable for binary counters, accumulators, arithmetic control logic, frequency-division circuits, instrumentation, industrial control, and educational digital-logic systems. Its 4-bit width and fast-carry architecture are useful when a design needs several adder stages in one package. The 5.5 V supply and 16-DIP format make it especially relevant to classic through-hole TTL-compatible designs.
Can MC74F283N be cascaded for more than four bits?
Yes, the MC74F283N can be used in a wider cascaded adder arrangement because its carry path is designed for extending the arithmetic width. The carry output from the lower-order package connects to the carry input of the next package, while the corresponding sum and operand lines continue in parallel. Timing and fan-out must be checked in the manufacturer datasheet.
What is the best drop-in replacement for MC74F283N?
DM74LS283N is the clearest documented drop-in candidate because it is also identified as an onsemi binary full adder with fast carry in a 16-PDIP package. Its logic technology and propagation timing differ from the F-series device, so timing-sensitive designs should be reviewed before substitution. No five fully verified drop-in alternatives were established for the MC74F283N.
Can DM74LS283N replace MC74F283N?
DM74LS283N can serve as a functional and package-compatible candidate because both devices are listed as 16-pin binary full adders with fast carry. The important trade-off is technology: DM74LS283N belongs to the LS family, while MC74F283N belongs to the F family. Propagate delay and supply-current requirements must be compared with the original system timing before final substitution.
What is the difference between MC74F283N and DM74LS283N?
Both MC74F283N and DM74LS283N are 4-bit binary full adders with fast carry in 16-pin DIP-related packages. The principal distinction is logic-family speed and electrical behavior: MC74F283N is an F-family device, whereas DM74LS283N is an LS-family device. Exact timing and current values should be read from each manufacturer datasheet before treating the substitution as timing-equivalent.
When should I choose MC74F283N instead of DM74LS283N?
Choose MC74F283N when the original design depends on F-family propagation performance or has been validated with that device’s electrical characteristics. Choose DM74LS283N when its slower LS-family timing remains acceptable and supply from another manufacturer is desirable. Because the two families can differ in delay and current, the system clock and load conditions determine which option is appropriate.
Is MC74F283N the same as SN74LS283?
MC74F283N and SN74LS283 perform the same general 4-bit binary full-adder function with fast carry, but they are not the same part number or the same logic family. MC74F283N belongs to the onsemi MC74F family, while SN74LS283 belongs to the Texas Instruments LS family. Both use a 16-pin through-hole format in standard catalogs, making electrical and timing checks essential before interchange.
What is the best onsemi equivalent for MC74F283N?
DM74LS283N is the most directly documented onsemi alternative because it is identified as a binary full adder with fast carry in a 16-PDIP package. It offers the same functional architecture and physical form as MC74F283N, but its LS-family timing differs from the F-family target. Validate clock margin, propagation delay, and power behavior for the intended circuit.
Where can I buy MC74F283N online?
The MC74F283N can be requested through the “Request a Quote” form on this XAIPART product page. The form is the appropriate route for current commercial availability, order quantities, and delivery scheduling for the exact onsemi MC74F283N. Component listings confirm the part identity, but quotations should be generated from the current request form rather than from static listing data.
What is the price of MC74F283N?
Current pricing for MC74F283N should be obtained through the “Request a Quote” form on this page so that the commercial record reflects current availability and order quantity. The part is a catalogued onsemi 4-bit fast-carry full adder in a 16-DIP package. Request a quotation for the exact MPN rather than relying on a historical unit-price figure.
What is the lead time and stock status for MC74F283N?
Current stock status, minimum order quantity, and lead time for MC74F283N should be confirmed through the “Request a Quote” form on this page. The manufacturer datasheet is the proper source for device specifications, while the quotation request provides the transaction-specific commercial response. This approach avoids confusing the exact 16-DIP MC74F283N with related MC74F283 variants.
What are the key specifications of MC74F283N that engineers should know?
The key confirmed specifications are a 4-bit binary addition function, fast-carry implementation, 5.5 V supply, and 16-DIP package. The device belongs to the MC74F logic family and is intended as a combinational arithmetic building block. The manufacturer datasheet should be consulted for propagation delay, supply current, input thresholds, output drive, temperature range, and exact pin naming.
Is MC74F283N suitable for industrial control and counter designs?
MC74F283N is functionally suitable for counter, accumulator, arithmetic-control, instrumentation, and industrial-control logic when its 5.5 V supply and classic 16-DIP implementation match the system architecture. Its fast-carry structure supports arithmetic at the bit level. Confirm operating-temperature and lifecycle requirements against the manufacturer documentation before releasing an industrial design.

Data referensi engineering untuk MC74F283N — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MC74F283N when maintaining an existing design that was specified around the onsemi MC74F family, especially if its propagation timing is important to the arithmetic path. DM74LS283N is the closest same-manufacturer option and preserves the 4-bit fast-carry function and 16-pin through-hole format, but it belongs to the LS family and must be timing-checked. SN74LS283 offers a Texas Instruments source for the same general 4-bit adder function, while CD74HCT283 is relevant when HCT-family input characteristics are preferable. For all three alternatives, verify supply voltage, logic thresholds, propagation delay, power consumption, temperature range, lifecycle status, and exact pin assignment. Choose the original MC74F283N when qualification history or timing margin cannot be reassessed. The alternatives are appropriate when their datasheet characteristics remain within the system requirements.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini DM74LS283N SN74LS283 CD74HCT283
Package 16-DIP 16-PDIP 16-PDIP 16-PDIP
Brand onsemi onsemi Texas Instruments Texas Instruments
Function 4-bit binary full adder with fast carry Binary full adder with fast carry 4-bit binary full adder 4-bit binary full adder
Data Width 4 bits 4 bits 4 bits 4 bits
Logic Family MC74F 74LS 74LS 74HCT
Carry Architecture Fast carry Fast carry Fast carry Fast carry
Mounting Type Through-hole Through-hole Through-hole Through-hole
Special Features Fast carry Fast carry Fast carry HCT-family input compatibility

Diferensiator Kunci

  • Uses F-family logic timing rather than LS-family timing (vsDM74LS283N)
  • Combines four binary full-adder stages in one package (vsSN74LS283)
  • Maintains a 16-pin through-hole footprint for classic arithmetic boards (vsCD74HCT283)

Catatan Desain

Treat every sum and carry output as a timing-critical path. Include the selected device’s propagation delay, trace delay, input slew effects, and receiver setup requirements when establishing the system clock limit. Use the manufacturer timing diagram to determine whether the carry chain remains valid at the intended temperature and supply voltage. Do not assume that a functionally identical replacement has the same delay budget.

Place the IC close to the buses it receives and drives, and keep the four operand paths, four sum paths, and carry connections as short as practical. In a cascaded design, route the carry output directly toward the next package’s carry input to minimize accumulated delay. Maintain a continuous ground reference and avoid routing high-current or switching-node traces adjacent to the adder inputs.

A same-package replacement is not automatically a timing-equivalent replacement. MC74F283N, DM74LS283N, SN74LS283, and CD74HCT283 belong to different logic families, so input thresholds, output levels, power behavior, and propagation delays must be compared. Also verify that every input is actively driven or connected according to the manufacturer’s unused-input guidance; otherwise, unused logic inputs may introduce unpredictable switching.

Budget the IC’s supply current across every operating state, including maximum switching activity on the sum and carry outputs. Because the exact MC74F283N supply-current limit is not stated in the product listing, obtain the manufacturer datasheet before sizing the rail and decoupling network. Place local bypass capacitance close to the supply pins and keep the return path short to reduce supply noise at the switching outputs.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available product information identifies the manufacturer, function, supply voltage, bit width, and package, but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

Pencarian Terkait

MC74F283N datasheet MC74F283N pinout MC74F283N datasheet pdf MC74F283N equivalent MC74F283N replacement MC74F283N cross reference MC74F283N price MC74F283N stock onsemi MC74F283N MC74F283N 16-DIP pinout MC74F283N 4-bit full adder MC74F283N fast carry adder MC74F283N vs DM74LS283N MC74F283N vs SN74LS283 MC74F283N counter application

Komponen dan Istilah Terkait

onsemi MC74F283N MC74F283 DM74LS283N SN74LS283 CD74HCT283 4-bit binary full adder fast-carry adder combinational logic specialty logic integrated circuit semiconductor 16-DIP DIP package through-hole assembly 5.5 V supply binary addition carry propagation arithmetic logic unit binary counter digital accumulator address generation logic industrial control digital instrumentation logic prototyping
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ