Produk (22.000+)

ATTINY406-SN - 8-Bit 20MHz AVR Microcontroller | Microchip Technology
ATTINY406-SN

ATTINY406-SN - 8-Bit 20MHz AVR Microcontroller | Microchip Technology

The Microchip Technology ATTINY406-SN is an 8-bit AVR microcontroller designed for compact embedded control, low-voltage operation, and space-constrained applications. The available verified data confirms the manufacturer and ordering code, while detailed electrical, package, memory, and pricing information was not returned by the source retrieval. The ATTINY406 family is associated with the AVR 8-bit microcontroller architecture, a RISC processor family widely used for embedded control, serial communication, sensing, and actuator monitoring. Its compact form factor and low-power design focus suit battery-powered instruments, industrial automation nodes, consumer accessories, and connected peripheral designs. The ATTINY406-SN belongs to the broader product hierarchy of microcontroller, embedded processor, 8-bit microcontroller, AVR microcontroller, and power-management-aware embedded controller. AVR devices combine a compact instruction set with integrated flash memory, EEPROM, SRAM, timers, serial interfaces, and GPIO resources. This integration allows a small controller to execute local control logic without an external processor, reducing system size and component count. The -SN ordering suffix identifies the specific supplier package configuration, but the package dimensions and pin assignment must be confirmed from the manufacturer datasheet before layout. Key engineering features of the ATTINY406 family include its 8-bit processing architecture, broad embedded-control capability, and low-power operating concept. These characteristics make the device suitable for peripheral controllers that monitor switches, sensors, encoders, LEDs, relays, or local communication nodes. Because the retrieved data did not include verified clock, flash, SRAM, I/O, voltage, temperature, or ADC specifications, those values must not be assumed; engineers should use the official device data sheet for exact ratings and ordering information. Typical use cases include industrial sensor nodes, building and access-control peripherals, battery-powered measurement products, compact motor-control helpers, and USB-to-serial or general-purpose embedded interfaces. In each application, the MCU can consolidate low-speed control tasks while external devices handle higher-power switching, high-speed signaling, or specialized analog functions. The AVR ecosystem also supports firmware development with established IDEs, compilers, debuggers, and programming tools, subject to the specific debugger and adapter selected. Design planning should begin by downloading the official ATTINY406 data sheet and confirming the exact package, pin count, exposed pads, power pins, programming pins, and operating limits. Decoupling capacitors should be placed close to each supply pin, programming access must be preserved, and unused inputs should be terminated according to the datasheet. This page synthesizes verified source status, honest data gaps, replacement constraints, and practical selection guidance rather than inventing specifications that were not available.

Permintaan RFG Kontak
ATTINY412-SSF - 8-bit AVR tinyAVR 1 MCU, 4KB Flash, 8-SOIC | Microchip
ATTINY412-SSF

ATTINY412-SSF - 8-bit AVR tinyAVR 1 MCU, 4KB Flash, 8-SOIC | Microchip

The Microchip Technology ATTINY412-SSF is an 8-bit AVR RISC microcontroller from the tinyAVR 1-series, featuring 4KB of Flash, 256 bytes of SRAM, and 128 bytes of EEPROM in an 8-pin SOIC package, operating up to 20 MHz with a 2.7V to 5.5V supply. It is rated for the industrial -40C to +125C temperature range and includes a 10-bit ADC, hardware multiplier, Event System, and SleepWalking peripherals. Functional Safety (FuSa) variants are available for safety-critical designs requiring IEC 61508 SIL compliance. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), non-volatile storage (EEPROM), and configurable peripherals such as timers, ADC, and communication controllers on one die. tinyAVR 1-series devices occupy the entry-level position in Microchip's 8-bit AVR hierarchy: tinyAVR -> megaAVR -> AVR -> Microchip 8-bit MCU family. They are optimized for cost-sensitive, low-pin-count, low-power embedded designs that need deterministic behavior and Core Independent Peripherals (CIPs). The ATTINY412 differentiates itself from older tinyAVR generations by using the latest 8-bit AVR core with a hardware multiplier (single-cycle), 6-event System, 4-channel 10-bit ADC with up to 12-bit resolution via oversampling, and Configurable Custom Logic (CCL) LUTs. These features enable the MCU to handle sensor conditioning, signal routing, and glue logic autonomously, offloading the CPU. Functional Safety (FuSa) variants add documentation packages for IEC 61508 SIL 2/3 systems. Architecturally, the device uses a Harvard-style 8-bit RISC core with a 2-stage pipeline, executes most instructions in one cycle, and integrates a bandgap reference, brown-out detector, and 20 MHz internal oscillator. The picoPower technology minimizes active and sleep currents. Peripherals are mapped via the event system, enabling deterministic inter-peripheral signalling without CPU intervention. Typical applications include IoT sensor nodes, LED lighting controllers, capacitive touch interfaces, low-end BLDC motor commutation, battery-powered wearables, and industrial sensor conditioning. The wide 2.7V-5.5V supply range allows direct operation from a single Li-ion cell or a 5V rail. When designing with this part, reserve one pin for UPDI programming (shared with a GPIO), budget board space for a decoupling capacitor on VDD and a 0.1uF on AVDD if analog is used, and validate toolchain compatibility with Microchip Studio or MPLAB X IDE. This page synthesizes distributor pricing, drop-in alternatives from the same tinyAVR 1-series, and practical application context not contained in the manufacturer datasheet.

Permintaan RFG Kontak
ATTINY412-SSFR - 8-bit AVR tinyAVR 1 MCU, 4KB Flash, SOIC-8 | Microchip
ATTINY412-SSFR

ATTINY412-SSFR - 8-bit AVR tinyAVR 1 MCU, 4KB Flash, SOIC-8 | Microchip

The Microchip Technology ATTINY412-SSFR is an 8-bit AVR tinyAVR 1-series microcontroller (Functional Safety, FuSa) running at up to 20 MHz with 4 KB Flash, 256 bytes SRAM, and 128 bytes EEPROMin an 8-pin SOIC-8 package.It delivers 16 MIPS throughput from the AVR RISC core with hardware multiplier, integrates a 6-channel 10-bit ADC, an 8-bit DAC, two 16-bit timers, and one 12-bit timer, plus configurable custom logic and the Event System / SleepWalking peripheral set. An 8-bit AVR microcontroller is aRISC-architecture CPU that executes one instruction per clock cycle, enabling deterministic real-time response with very low active power. The tinyAVR 1-series sits insideMicrochip's 8-bit AVR portfolio below the megaAVR and XMega families, optimized for cost- and power-constrained embedded designs that need on-chip analog and event-driven peripherals.Positioned as a drop-in successor to legacy ATtiny25/45/85 partson SOIC-8 footprints, the ATtiny412 adds modern peripherals (Event System, configurable custom logic) while preserving the AVR toolchain (GCC, Atmel Studio / Microchip Studio, MPLAB X). Key differentiating specifications include 4 KB self-programmable Flash, 256 B SRAM, 128 B EEPROM, six ADC channels with 10-bit resolution, a single-channel 8-bit DAC, two 16-bit Timer/Counter Type B instances plus one 12-bit Timer/Counter Type D, and the Peripheral Touch Controller (PTC) supporting touch buttons via the slider/wheel QTouch library. A 10-pin UPDI programming/debug interface replaces the legacy ISP header, and the device operates from 1.8 V to 5.5 V with picoPower sleep modes down to sub-microamp current. The architecture combines the deterministic AVR 8-bit pipeline with a hardware multiplierfor faster integer math, plus the Event System that lets peripherals trigger each other without CPU intervention - critical for SleepWalking low-power designs. The integrated 8-bit DAC and 10-bit ADC remove the need for external analog components in closed-loop and sensor-interface designs. Typical applications include capacitive-touch button interfaces, IoT sensor nodes, low-power wearables, LED lighting controllers, and small appliance user-interface boards where its SOIC-8 footprint, on-chip analog, and picoPower modes are decisive advantages. The Functional Safety (FuSa) variant is suited to designs targeting IEC 60730 class B appliance-safety requirements. When designing with the ATTINY412-SSFR, route the UPDI programming pin to a dedicated test pad or 1x3 header for in-system programming; the SOIC-8 does not expose the legacy 6-pin ISP interface. Decouple VDD with a 100 nF X7R ceramic placed within2 mm of the supply pin, and leave PB0/PB1 free for the default UPDI/XTAL functions unless re-mapped via the fuse settings. This page synthesizesdistributor pricing, same-brand and cross-brand drop-in alternatives, andpractical design notes thatcomplementthemanufacturer datasheet (DS40001911B).

Permintaan RFG Kontak
ATTINY412-SSNR - 8-bit AVR tinyAVR 1 MCU 20MHz 4KB Flash SOIC-8 | Microchip
ATTINY412-SSNR

ATTINY412-SSNR - 8-bit AVR tinyAVR 1 MCU 20MHz 4KB Flash SOIC-8 | Microchip

The Microchip Technology ATTINY412-SSNR is an 8-bit AVR tinyAVR 1-series microcontroller with hardware multiplier, running at up to 20 MHz with 4 KB Flash, 256 bytes SRAM, and 128 bytes EEPROM, housed in an 8-pin SOIC package. Functional Safety (FuSa) ready and built on picoPower technology, it integrates a 10-bit ADC, a configurable custom logic block, and the Event System with SleepWalking for interrupt-driven, low-energy peripheral operation. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals such as ADC, timers, and communication interfaces. The AVR 8-bit RISC architecture executes one instruction per clock cycle, giving the tinyAVR 1-series deterministic throughput at modest clock rates. Within the broader taxonomy, the ATTINY412 sits at the bottom of Microchip's tinyAVR family — a sub-category of 8-bit microcontrollers — positioned below the megaAVR series and far below 32-bit ARM Cortex-M0+ devices such as the SAMD21 in compute, but with a substantially smaller footprint and lower price point. Key differentiating specifications include 4 KB self-programmable Flash, 256-byte SRAM, 128-byte EEPROM, 20 MHz maximum CPU clock, and an operating voltage range of 1.8V to 5.5V. The device exposes 6 GPIO pins (6 usable I/O on the 8-pin SOIC), supports up to 6 PWM channels via Timer/Counter A, integrates a 10-bit 115 ksps ADC with up to 6 analog channels, and offers a peripheral touch controller (PTC) for buttons and sliders. Sleep current is in the single-digit microampere range, making it suitable for battery-powered and energy-harvesting applications. The architecture combines an AVR 8-bit CPU core with a hardware multiplier for fast 16-bit math, a deterministic interrupt controller, and the Event System — a hardware interconnect that lets peripherals trigger each other without CPU intervention. This core-independent peripheral (CIP) design enables SleepWalking, in which a peripheral can wake the CPU only when a configured event occurs, dramatically reducing average current draw. Typical applications include low-power IoT sensor nodes, consumer electronics human-machine interfaces (HMI), battery management, LED driving and lighting control, and compact motor or fan control. The PTC and high-resolution PWM make it well-suited to capacitive-touch user interfaces and BLDC or DC motor commutation. When designing with this part, observe the absolute maximum VDD of 6V and configure the unused pins as outputs with low state to minimize leakage. Migration within the tinyAVR 1-series is straightforward: ATTINY212-SSN shares the same pinout with 2 KB Flash and 128-byte SRAM, while ATTINY414 adds 2 KB Flash. Choose by memory headroom rather than peripheral set. This document synthesizes distributor pricing, parametric alternatives, and practical design guidance not found in the manufacturer datasheet alone — including cross-brand equivalents sourced from live distributor data and application-specific recommended companion parts.

Permintaan RFG Kontak
ATTINY414-SSF - 20MHz AVR MCU, 4KB Flash | Microchip
ATTINY414-SSF

ATTINY414-SSF - 20MHz AVR MCU, 4KB Flash | Microchip

Microchip Technology ATTINY414-SSF is an 8-bit AVR tinyAVR microcontroller rated up to 20 MHz, with 4 KB Flash, 256 bytes SRAM, 128 bytes EEPROM, and 12 general-purpose I/O pins in a 14-pin SOIC package. It combines an AVR processor with core-independent peripherals, Event System, SleepWalking, accurate analog functions, and a 10-bit ADC. An AVR microcontroller is a compact embedded-control IC that executes programmed instructions from nonvolatile Flash memory while reading sensors and controlling digital or analog peripherals. The tinyAVR 1 family combines an 8-bit AVR core with event-driven hardware and low-power operation. This places the ATTINY414-SSF in the hierarchy of embedded microcontroller, embedded processor, semiconductor, and power-management-aware control device for small industrial, consumer, and automotive-adjacent systems. Key features include a hardware multiplier, 4 KB of Flash, 256 bytes of SRAM, and 128 bytes of EEPROM. Its connectivity options include I2C, IrDA, LINbus, SPI, and UART/USART. The analog section includes a 10-channel, 10-bit ADC and one 8-bit DAC. The SSF ordering designation supports an industrial operating range from -40°C to 125°C, making the device appropriate for designs requiring extended temperature operation. The device belongs to the ATtiny212, ATtiny214, ATtiny412, ATtiny414, and ATtiny416 family, whose SRAM organization differs by member. The ATtiny414 specifically provides 256 bytes of SRAM and 128 bytes of EEPROM. Its low-power architecture includes Event System and SleepWalking functions, allowing peripherals to initiate activity or wake the core without requiring continuous software polling. These hardware mechanisms can reduce processing overhead in event-driven control systems. Typical applications include compact sensor nodes, industrial condition-monitoring terminals, low-power control panels, LIN-connected automotive peripherals, communication bridges, and small actuator controllers. The combination of 12 I/O pins, multiple serial interfaces, on-chip analog conversion, and a 14-pin SOIC footprint supports compact mixed-signal designs where board area and component count are important. When laying out the circuit, place decoupling capacitors close to the supply and ground pins, route sensitive analog inputs away from fast-switching nodes, and maintain the operating voltage limits defined by the manufacturer datasheet. Confirm the programmed clock configuration because catalog listings may show a 16 MHz product-page frequency while the manufacturer describes the family as capable of running up to 20 MHz. This page combines manufacturer specifications, package and pinout guidance, functional alternatives, comparison parameters, and practical embedded-design considerations into a procurement-oriented reference for engineers evaluating the ATTINY414-SSF.

Permintaan RFG Kontak
ATTINY416-MNR - 20MHz 4KB AVR MCU | Microchip Technology
ATTINY416-MNR

ATTINY416-MNR - 20MHz 4KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY416-MNR is an 8-bit tinyAVR 1-series microcontroller with a 20 MHz maximum clock, 4 KB of Flash memory, 256 bytes of SRAM, and 128 bytes of EEPROM in a 20-VQFN surface-mount package. It combines an AVR processor with a hardware multiplier and integrated Event System and SleepWalking capabilities. A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The ATTINY416 belongs to the tinyAVR family, a 32-bit-footprint, low-power branch of 8-bit AVR microcontrollers used for embedded control. Its combination of modest memory, event handling, accurate analog functions, and communication peripherals makes it suitable for compact control systems that need more capability than a basic logic device. The device provides 4 KB of Flash for firmware, 256 bytes of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter storage. The AVR core includes a hardware multiplier and can operate at up to 20 MHz. Peripherals include the Event System, SleepWalking, accurate analog features, and advanced peripherals described by Microchip for the tinyAVR 1-series. These functions support responsive event-driven firmware and low-power peripheral operation. The ATTINY416-MNR uses a 20-pin VQFN package measuring 3 mm by 3 mm, with an exposed pad that also serves as the ground connection. This compact surface-mount construction requires careful PCB layout and adequate exposed-pad thermal management. Although the package is small, its peripheral integration reduces the need for external components in sensor, control, and communication-oriented embedded products. Typical uses include industrial sensing modules, compact sensor nodes, building-control accessories, consumer products, embedded instrumentation, and low-power control boards. The ATtiny416 family is also associated with evaluation and development platforms, including ATtiny416-based Xplained-style hardware. Developers can evaluate the MCU with Microchip tooling while using the 4 KB Flash budget for small control tasks, data acquisition, and peripheral coordination. A key design consideration is exposed-pad layout. Connect the exposed pad to ground using a solid copper plane and vias, and follow the manufacturer land-pattern and solder-reflow guidance. This helps reduce thermal resistance and prevents pad-related soldering issues. Confirm the selected device’s operating-voltage limits and peripheral characteristics in the manufacturer datasheet before finalizing the power architecture. This page combines the manufacturer’s device specifications with practical package guidance, sourcing information, and a focused drop-in comparison. It also identifies the constraints engineers must evaluate before treating a substitute as a true replacement: package dimensions, pin functions, clock rating, memory capacity, peripheral compatibility, and firmware support.

Permintaan RFG Kontak
ATTINY416-SF 20MHz 4KB Flash AVR MCU | Microchip
ATTINY416-SF

ATTINY416-SF 20MHz 4KB Flash AVR MCU | Microchip

The Microchip Technology ATTINY416-SF is an 8-bit tinyAVR 1 functional-safety microcontroller with a 20 MHz maximum clock, 4 KB of Flash program memory, 256 B of SRAM, and 128 B of EEPROM in a 20-pin SOIC package. It is built around the AVR 8-bit processor with a hardware multiplier and combines an event system, SleepWalking capability, accurate analog features, and advanced peripherals for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working data memory, input/output ports, and peripherals on one device. The tinyAVR family occupies the low-power, resource-conscious segment of the broader 8-bit microcontroller market. These devices are commonly used for local sensing, actuator control, communication interfaces, and compact products in which deterministic control and low system complexity matter more than processing throughput. The ATTINY416-SF provides 4 KB of in-system reprogrammable Flash, 256 B of SRAM, and 128 B of EEPROM. According to the Microchip ATtiny416/ATtiny816 datasheet, the ATTINY416 Flash is organized as 4K by 16 because all AVR instructions are either 16 or 32 bits wide. The processor can operate at up to 20 MHz, while the ATTINY416-SF is specified by Microchip as a 16 MHz industrial-temperature device in the 20-pin SOIC configuration. Its integrated peripherals support general-purpose control without requiring a separate programmable logic device. The event system allows hardware-generated events to trigger peripheral actions, reducing dependence on CPU polling. SleepWalking permits selected peripherals to wake or continue activity while the core sleeps. These features are useful in low-power products that must respond quickly to external activity without maintaining a continuously active CPU. Typical applications include compact industrial controllers, sensor-hub and condition-monitoring nodes, building and appliance control modules, low-power consumer products, and small motor or actuator-control systems. The combination of event-driven peripherals, serial interfaces, analog resources, and low-power modes makes the device suitable for designs that balance responsiveness, deterministic timing, and compact board area. A key design consideration is that software, peripheral configuration, clock settings, and pin multiplexing must be coordinated before the design reaches prototype testing. UPDI programming and a separate programming interface should be laid out with test-point access, while unused pins should be terminated according to the final board configuration. Temperature, voltage, and decoupling requirements should follow the manufacturer datasheet and selected package details. This page organizes the manufacturer's device information, distributor listings, and package-oriented comparison information into an engineering-focused resource. It also identifies the limited drop-in substitution landscape, highlights functional differences among related AVR devices, and provides application and design guidance for evaluating the ATTINY416-SF in embedded systems.

Permintaan RFG Kontak
ATTINY416-SFR 20MHz 4KB Flash AVR MCU | Microchip (Tape & Reel)
ATTINY416-SFR

ATTINY416-SFR 20MHz 4KB Flash AVR MCU | Microchip (Tape & Reel)

The Microchip Technology ATTINY416-SFR is an 8-bit tinyAVR 1 functional-safety microcontroller with a 20 MHz maximum clock, 4 KB of Flash program memory, 256 B of SRAM, and 128 B of EEPROM in a 20-pin SOIC package. It is built around the AVR 8-bit processor with a hardware multiplier and combines an event system, SleepWalking capability, accurate analog features, and advanced peripherals for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working data memory, input/output ports, and peripherals on one device. The tinyAVR family occupies the low-power, resource-conscious segment of the broader 8-bit microcontroller market. These devices are commonly used for local sensing, actuator control, communication interfaces, and compact products in which deterministic control and low system complexity matter more than processing throughput. The ATTINY416-SFR provides 4 KB of in-system reprogrammable Flash, 256 B of SRAM, and 128 B of EEPROM. According to the Microchip ATtiny416/ATtiny816 datasheet, the ATTINY416 Flash is organized as 4K by 16 because all AVR instructions are either 16 or 32 bits wide. The processor can operate at up to 20 MHz, while the ATTINY416-SFR is specified by Microchip as a 16 MHz industrial-temperature device in the 20-pin SOIC configuration. Its integrated peripherals support general-purpose control without requiring a separate programmable logic device. The event system allows hardware-generated events to trigger peripheral actions, reducing dependence on CPU polling. SleepWalking permits selected peripherals to wake or continue activity while the core sleeps. These features are useful in low-power products that must respond quickly to external activity without maintaining a continuously active CPU. Typical applications include compact industrial controllers, sensor-hub and condition-monitoring nodes, building and appliance control modules, low-power consumer products, and small motor or actuator-control systems. The combination of event-driven peripherals, serial interfaces, analog resources, and low-power modes makes the device suitable for designs that balance responsiveness, deterministic timing, and compact board area. A key design consideration is that software, peripheral configuration, clock settings, and pin multiplexing must be coordinated before the design reaches prototype testing. UPDI programming and a separate programming interface should be laid out with test-point access, while unused pins should be terminated according to the final board configuration. Temperature, voltage, and decoupling requirements should follow the manufacturer datasheet and selected package details. This page organizes the manufacturer's device information, distributor listings, and package-oriented comparison information into an engineering-focused resource. It also identifies the limited drop-in substitution landscape, highlights functional differences among related AVR devices, and provides application and design guidance for evaluating the ATTINY416-SFR in embedded systems.

Permintaan RFG Kontak
ATTINY416-SN - 20MHz 8-bit AVR MCU | Microchip Technology
ATTINY416-SN

ATTINY416-SN - 20MHz 8-bit AVR MCU | Microchip Technology

The Microchip Technology ATTINY416-SN is an 8-bit tinyAVR microcontroller with a maximum operating frequency of 20 MHz, 4 KB of in-system programmable Flash memory, 256 bytes of SRAM, and 128 bytes of EEPROM in a 20-pin SOIC package. Its hardware multiplier supports efficient 8-bit and 16-bit multiplication, while the compact architecture integrates digital control, accurate analog functions, communication peripherals, an Event System, and SleepWalking capability into a single device. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The tinyAVR family belongs to the hierarchy of 8-bit AVR microcontrollers, embedded controllers, and semiconductor devices. Instead of requiring a separate processor, memory, and interface circuitry, the ATTINY416-SN provides a compact control platform for compact industrial, consumer, communication, and automation products. The device runs AVR instructions at up to 20 MHz and organizes its 4 KB program Flash as 4K by 16 bits because AVR instructions are 16 or 32 bits wide. Its 256-byte SRAM provides working memory, while 128 bytes of nonvolatile EEPROM can retain small configuration or calibration values. The integrated analog features, Event System, and SleepWalking peripherals extend its usefulness beyond simple GPIO control while preserving a low-power design profile. The ATTINY416-SN is suitable for designs using I2C, SPI, or USART connectivity, as identified in the manufacturer product information. These interfaces allow the microcontroller to connect sensors, serial memories, converters, communications modules, and other embedded peripherals without requiring discrete interface controllers. The Event System can route peripheral events directly between hardware functions, reducing CPU involvement in time-sensitive tasks, while SleepWalking allows selected peripherals to operate while the CPU is asleep. Typical applications include compact sensor controllers, industrial condition-monitoring nodes, building-automation endpoints, low-power communication modules, actuator-control boards, and small consumer products. The 20-pin SOIC package supports conventional surface-mount assembly, while the combination of 20 MHz processing, EEPROM, and mixed serial interfaces provides a practical balance of capability, size, and design complexity. For new PCB layouts, confirm the exact pin assignments and alternate-function capabilities in the Microchip datasheet before routing pins. Keep programming access, decoupling, power, ground, and communication signals routed according to the device's recommended layout, and validate clock, reset, and sleep-mode behavior across the complete operating temperature range. This page combines the ATTINY416-SN specifications with package guidance, application-focused engineering context, datasheet links, and same-package replacement analysis. It is designed to help engineers identify the correct memory configuration, package, programming interface, and device variant before beginning layout or firmware development.

Permintaan RFG Kontak
ATTINY417-MF 16MHz 4KB AVR MCU | Microchip Technology
ATTINY417-MF

ATTINY417-MF 16MHz 4KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY417-MF is an 8-bit AVR tinyAVR microcontroller featuring a hardware multiplier, up to 20 MHz operating speed, 4 KB of Flash memory, 256 bytes of SRAM, and 128 bytes of EEPROM in a 24-pin QFN package. It is designed for compact embedded systems, low-power control, analog sensing, and functional-safety-oriented embedded applications. An AVR tinyAVR microcontroller is an 8-bit reduced-instruction-computing controller designed to combine low-power operation, deterministic peripheral handling, and integrated analog functions on a small package. The ATTINY417 family includes Core Independent Peripherals, an Event System, SleepWalking capability, accurate analog features, and flexible event routing, making it useful for applications that require more responsiveness than a simple polling-based design. Key device features include an 8-bit AVR processor with hardware multiplier, 4 KB of Flash program memory, 256 bytes of SRAM, 128 bytes of EEPROM, and operation up to 20 MHz according to the Microchip ATtiny417/817 datasheet. The device also provides functional-safety-related features identified by the manufacturer for the ATTINY417-MF ordering variant. The 24-QFN package is intended for compact PCB layouts and surface-mount assembly. Its 4 mm by 4 mm footprint supports integration into small embedded products while providing analog and digital peripherals needed for sensor conditioning, actuator control, communication, and general-purpose logic. Typical applications include low-power industrial sensing, compact consumer controls, IoT sensor nodes, small motor and relay control boards, and functional-safety-related embedded monitoring systems. The ATTINY417-MF is particularly useful when a design requires more processing capability and peripheral integration than a simple 8-pin microcontroller, without moving to a larger 32-bit MCU. For PCB implementation, follow the manufacturer pin description and land-pattern guidance in the ATtiny417/817 datasheet. Confirm the exact I/O assignment, power pins, clock requirements, decoupling requirements, and programming interface before layout release. The manufacturer documentation should be used as the authority for all pin-level decisions. This page consolidates the device specifications, comparison points, and design guidance needed to evaluate the ATTINY417-MF in a new embedded design. It also highlights the distinctions between the ATTINY417 and ATTINY817 family members so engineers can select the correct memory configuration without relying on family-level assumptions.

Permintaan RFG Kontak
ATTINY417-MN - 20MHz 4KB AVR MCU | Microchip Technology
ATTINY417-MN

ATTINY417-MN - 20MHz 4KB AVR MCU | Microchip Technology

The Microchip Technology ATTINY417-MN is an 8-bit AVR tinyAVR microcontroller with a 20 MHz maximum clock frequency, 4 KB of Flash program memory, and a 24-QFN 4 x 4 mm package. It also provides 256 bytes of SRAM, 128 bytes of EEPROM, and a hardware-multiplier-equipped AVR processor for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATTINY417 belongs to the TinyAVR family, which sits within the broader hierarchy of 8-bit AVR microcontrollers, embedded controllers, and semiconductor components. This combination makes the device useful for small control systems that need programmable logic, serial communication, analog measurement, and compact board area without a larger application processor. The ATTINY417's headline features include its 20 MHz operating speed, 4 KB Flash memory, 256 B SRAM, and 128 B EEPROM. The processor includes a hardware multiplier, while the device uses Microchip's Core Independent Peripherals architecture. Its 24-QFN 4 x 4 mm package is intended for space-constrained surface-mount assemblies where a compact land pattern is important. The 4.5 V to 5.5 V operating-supply range makes the ATTINY417 suitable for 5 V embedded systems. The manufacturer lists the ATTINY417-MN as an industrial-temperature variant with an indicated maximum rating of 105°C. The part identifier appears in a 24-QFN 4 x 4 mm package configuration and is associated with Functional Safety microcontroller terminology in distributor technical listings. Typical applications include compact industrial controllers, building and access-control modules, sensor-hub boards, communication equipment, LED-control systems, and compact consumer appliances. In each case, the MCU can execute firmware close to the sensed or controlled mechanism, reducing system complexity and keeping the design within a small, low-power embedded platform. Designers should assign every power pin and signal connection from the package pin-description table, preserve the recommended decoupling arrangement, and confirm operating voltage, clock configuration, and peripheral assignments in the manufacturer datasheet. PCB planning must accommodate the 24-QFN 4 x 4 mm footprint, exposed thermal pad requirements, and the selected programming and debugging interface. This product record combines the manufacturer specifications, exact package identification, sourcing context, engineering-use guidance, and selection criteria for ATTINY417-MN. It is intended to help engineers evaluate the device quickly while retaining the datasheet as the controlling reference for electrical limits, pin definitions, programming, and qualification requirements.

Permintaan RFG Kontak
ATTINY417-MNR - 20MHz 4KB AVR MCU | Microchip Technology (Tape & Reel)
ATTINY417-MNR

ATTINY417-MNR - 20MHz 4KB AVR MCU | Microchip Technology (Tape & Reel)

The Microchip Technology ATTINY417-MNR is an 8-bit AVR tinyAVR microcontroller with a 20 MHz maximum clock frequency, 4 KB of Flash program memory, and a 24-QFN 4 x 4 mm package. It also provides 256 bytes of SRAM, 128 bytes of EEPROM, and a hardware-multiplier-equipped AVR processor for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATTINY417 belongs to the TinyAVR family, which sits within the broader hierarchy of 8-bit AVR microcontrollers, embedded controllers, and semiconductor components. This combination makes the device useful for small control systems that need programmable logic, serial communication, analog measurement, and compact board area without a larger application processor. The ATTINY417's headline features include its 20 MHz operating speed, 4 KB Flash memory, 256 B SRAM, and 128 B EEPROM. The processor includes a hardware multiplier, while the device uses Microchip's Core Independent Peripherals architecture. Its 24-QFN 4 x 4 mm package is intended for space-constrained surface-mount assemblies where a compact land pattern is important. The 4.5 V to 5.5 V operating-supply range makes the ATTINY417 suitable for 5 V embedded systems. The manufacturer lists the ATTINY417-MNR as an industrial-temperature variant with an indicated maximum rating of 105°C. The part identifier appears in a 24-QFN 4 x 4 mm package configuration and is associated with Functional Safety microcontroller terminology in distributor technical listings. Typical applications include compact industrial controllers, building and access-control modules, sensor-hub boards, communication equipment, LED-control systems, and compact consumer appliances. In each case, the MCU can execute firmware close to the sensed or controlled mechanism, reducing system complexity and keeping the design within a small, low-power embedded platform. Designers should assign every power pin and signal connection from the package pin-description table, preserve the recommended decoupling arrangement, and confirm operating voltage, clock configuration, and peripheral assignments in the manufacturer datasheet. PCB planning must accommodate the 24-QFN 4 x 4 mm footprint, exposed thermal pad requirements, and the selected programming and debugging interface. This product record combines the manufacturer specifications, exact package identification, sourcing context, engineering-use guidance, and selection criteria for ATTINY417-MNR. It is intended to help engineers evaluate the device quickly while retaining the datasheet as the controlling reference for electrical limits, pin definitions, programming, and qualification requirements.

Permintaan RFG Kontak
ATTINY424-XF - 20MHz 4KB AVR MCU | Microchip Technology
ATTINY424-XF

ATTINY424-XF - 20MHz 4KB AVR MCU | Microchip Technology

Microchip Technology ATTINY424-XF is an 8-bit AVR microcontroller with a hardware multiplier, a maximum clock frequency of 20 MHz, 4 KB of Flash program memory, 512 bytes of SRAM, and 128 bytes of EEPROM in a 14-pin TSSOP package. The device is suited to compact embedded-control designs requiring efficient code execution, mixed-signal measurement, and a small PCB footprint. A microcontroller is an integrated circuit that executes firmware, reads inputs, controls outputs, and manages system timing within one device. The ATTINY424 belongs to Microchip's tinyAVR 2 family, combining an 8-bit AVR CPU with embedded nonvolatile memory, SRAM, and Core Independent Peripherals. This hierarchy places it between simple logic controllers and larger application-specific microcontrollers. The ATTINY424-XF provides 9-channel, 12-bit analog-to-digital conversion, allowing one device to acquire several analog inputs without requiring an external ADC. Its 20 MHz maximum operating frequency supports deterministic firmware execution, while 4 KB of Flash provides 4096 bytes for program storage. The 512-byte SRAM supports working variables and stack operations, and the 128-byte EEPROM provides nonvolatile data storage for configuration values or counters. The 14-pin TSSOP package limits board area while retaining separate GPIO connections and analog inputs. The -XF ordering identifies the TSSOP package configuration in the relevant Microchip ordering system. Because this device combines an AVR CPU, ADC, EEPROM, and event-oriented peripherals in one compact package, it can reduce external component count and simplify firmware architecture compared with a discrete processor-and-converter design. Typical applications include compact industrial controllers, digital thermometers, sensor-conditioning nodes, LED status panels, small motor-control modules, and low-cost consumer-control boards. The 12-bit ADC is particularly useful when the application requires more resolution than a basic digital threshold input but does not justify a larger mixed-signal microcontroller. The primary design consideration is firmware capacity. A 4 KB Flash device is appropriate for compact control tasks, but code growth should be checked against the 4096-byte program-memory limit. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and preserve the device's specified decoupling and programming connections around the TSSOP-14 footprint. This product summary combines the manufacturer family specifications, orderable-part information, and practical implementation guidance. It adds application context, interface considerations, and same-family replacement guidance to help engineers evaluate the ATTINY424-XF before schematic capture or PCB layout.

Permintaan RFG Kontak
ATTINY424-XU - 20MHz AVR Microcontroller | Microchip Technology
ATTINY424-XU

ATTINY424-XU - 20MHz AVR Microcontroller | Microchip Technology

The Microchip Technology ATTINY424-XU is an 8-bit AVR tinyAVR 2-series microcontroller with a maximum clock frequency of 20 MHz, 4 KB of Flash program memory, 512 bytes of SRAM, and 128 bytes of EEPROM in a 14-pin TSSOP package. It combines the AVR CPU with a hardware multiplier and core-independent peripherals for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one device. The ATTINY424-XU belongs to the hierarchy of microcontrollers, embedded processors, and semiconductors. Its small memory footprint and 14-pin package make it suitable for compact control, sensing, and communication modules where board area and energy efficiency are important constraints. The device provides 4 KB of in-system programmable Flash organized as 4K by 16-bit pages, together with 512 bytes of SRAM and 128 bytes of EEPROM. The AVR CPU supports 16-bit and 32-bit instructions and executes at up to 20 MHz. Core-independent peripherals reduce interrupt overhead and allow timing, serial communication, and other functions to operate with limited CPU involvement. The ATTINY424 family also includes devices with 8 KB of Flash, providing a common platform for applications that require more program storage. The ATTINY424-XU is specifically identified as a 14-pin TSSOP industrial-temperature device rated to 85°C. Its compact package supports conventional surface-mount assembly while exposing the mixed-signal and digital resources required by embedded systems. Typical uses include industrial control modules, compact sensor nodes, LED-control circuits, small motor controllers, and communication equipment. A design can use the 20 MHz clock for responsive control logic, utilize Flash for firmware, and place frequently changed configuration data in EEPROM. Serial-interface and timing peripherals can reduce firmware complexity when their core-independent functions match the application. PCB design should preserve short return paths for digital and analog signals, place decoupling capacitors close to the supply pins, and route sensitive inputs away from fast-switching nodes. Designers should also verify the exact peripheral multiplexing and pin functions in the manufacturer pin-description table before assigning external circuitry. The 14-pin TSSOP footprint requires careful solder-paste and reflow design to achieve reliable fine-pitch joints. This product page combines the manufacturer device information, exact-orderable-part identification, package details, and practical engineering guidance. It also distinguishes genuine drop-in replacements from related tinyAVR devices that use different packages or memory configurations, helping engineers make a defensible sourcing or replacement decision without assuming compatibility.

Permintaan RFG Kontak
ATTINY426-MF - 20MHz 4KB Flash AVR Microcontroller | Microchip
ATTINY426-MF

ATTINY426-MF - 20MHz 4KB Flash AVR Microcontroller | Microchip

Microchip Technology ATTINY426-MF is an 8-bit tinyAVR 2 family microcontroller with an AVR CPU and hardware multiplier, operating at up to 20 MHz, with 4 KB Flash memory, 512 bytes SRAM, and 128 bytes EEPROM in a 20-pin VQFN package measuring 3 x 3 mm. The -MF ordering code identifies the tray-packed industrial-temperature variant, which operates from -40°C to +125°C and supports 2.5 V, 3.3 V, and 5 V supply levels. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and I/O circuitry on one semiconductor device. The ATTINY426 belongs to the tinyAVR 2 family, a compact branch of the AVR 8-bit RISC microcontroller portfolio. This device hierarchy combines a small instruction set, event-control peripherals, and flexible pin multiplexing in a low-pin-count package suitable for embedded control systems. Key features include 20 MHz maximum CPU operation, 4 KB of Flash for program storage, 512 bytes of SRAM for working variables, and 128 bytes of EEPROM for nonvolatile data. The device also provides I2C, SPI, and UART/USART connectivity, enabling communication with sensors, serial memories, transceivers, and host systems. Its industrial temperature range supports demanding industrial control, sensor, and embedded interface applications. The AVR processor architecture provides an 8-bit RISC execution model with a hardware multiplier for efficient arithmetic operations. Its 4 KB program memory is sufficient for compact control logic, protocol handlers, state machines, and mixed analog-to-digital control functions. The 20-pin VQFN package also offers a practical balance between functional connectivity and board-space savings, although its exposed-pad construction requires careful PCB layout and assembly planning. Typical uses include industrial sensor nodes, compact motor and actuator controllers, serial protocol bridges, battery-powered monitoring equipment, and low-cost embedded automation modules. The device is particularly suitable when a design needs more general-purpose performance than a simple logic IC while retaining a compact footprint, low pin count, and familiar AVR software toolchain. PCB implementation should follow the exact land pattern, exposed-pad, and solder-reflow requirements in the Microchip package drawing. Firmware development should preserve sufficient Flash, SRAM, and EEPROM headroom for interrupts, stack use, bootloader requirements, and field updates rather than treating the memory ratings as the entire application capacity. This page consolidates manufacturer specifications, package information, sourcing details, application guidance, and defensible drop-in comparison points. It also distinguishes a genuine pin-compatible replacement from parts that merely belong to the broader microcontroller category, helping engineers make a footprint-safe sourcing decision.

Permintaan RFG Kontak
ATTINY426-MU - 20MHz 4KB 8-Bit Microcontroller | Microchip
ATTINY426-MU

ATTINY426-MU - 20MHz 4KB 8-Bit Microcontroller | Microchip

The Microchip Technology ATTINY426-MU is an 8-bit AVR tinyAVR 2-series microcontroller operating at up to 20 MHz, with 4 KB of Flash memory, 512 bytes of SRAM, and 128 bytes of EEPROM in a 20-pin VQFN 3 x 3 mm package. It uses the AVR CPU with a hardware multiplier and is intended for compact embedded-control designs requiring low pin count, deterministic control, and flexible serial communications. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals onto one device. The ATTINY426 belongs to the tinyAVR 2 family, a low-power 8-bit microcontroller line commonly used for local control, sensing, actuator management, and small consumer or industrial products. Its 20-pin VQFN package supports space-constrained boards while exposing GPIO and communication resources needed for embedded subsystems. The device provides 4 KB of Flash for program storage, 512 bytes of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter storage. The AVR CPU includes a hardware multiplier and operates at speeds up to 20 MHz. According to the Microchip ATtiny426 product page, the ATtiny426 family is available in 20-pin VQFN 3 x 3 mm, SSOP, and SOIC packages; the -MU ordering code identifies the 20-pin VQFN configuration. The tinyAVR 2 architecture emphasizes efficient event handling, configurable peripherals, and low-power operation. These characteristics make the ATTINY426-MU suitable for consumer appliances, building controls, sensor nodes, lighting systems, and compact motor-control or interface modules where a small MCU with integrated memories is preferable to a larger general-purpose processor. Typical designs use the microcontroller for state sequencing, digital input conditioning, sensor acquisition, and driving indicators or small actuators. Serial interfaces allow connection to sensors, memory, or host equipment, while GPIO pins support switches, alarms, and discrete control outputs. Designers should confirm clock, peripheral, and pin assignments in the ATtiny424/426/427/824/826/827 datasheet before finalizing the PCB. For low-power products, select the appropriate clock and sleep configuration, disable unused peripherals, and size external decoupling capacitors according to the circuit guidelines in the manufacturer datasheet. The small VQFN land pattern also requires careful PCB layout, assembly-process capability, and thermal review; adequate exposed-pad soldering and copper connectivity are important for reliable production performance. This product summary combines the exact ATTINY426-MU orderable configuration with the ATtiny426 family architecture, practical application guidance, package considerations, and sourcing information. It is intended to help engineers quickly assess whether the 20 MHz AVR core, 4 KB Flash footprint, and 3 x 3 mm VQFN package fit a specific embedded-control design.

Permintaan RFG Kontak
ATTINY426-SF - 20MHz AVR Microcontroller | Microchip
ATTINY426-SF

ATTINY426-SF - 20MHz AVR Microcontroller | Microchip

Microchip Technology ATTINY426-SF is an 8-bit AVR tinyAVR 2 microcontroller with a 20 MHz maximum clock, 4 KB Flash memory, 512 bytes SRAM, and 128 bytes EEPROM in a 20-pin SOIC package. The device provides 18 I/O lines and supports I2C, SPI, and two USART serial interfaces for compact embedded-control designs. An 8-bit microcontroller is a programmable semiconductor containing a CPU, memory, and peripherals on one integrated circuit. The AVR CPU architecture provides deterministic instruction execution, while the tinyAVR 2 family combines low-power operation with event-oriented peripherals. Within the product hierarchy, ATTINY426-SF is an 8-bit microcontroller, an AVR-family embedded controller, and a member of the tinyAVR 2 family of Microchip Technology semiconductors. The controller operates at up to 20 MHz and includes a hardware multiplier for efficient multiplication-intensive control routines. Its 4 KB Flash stores the application program, while 512 bytes of SRAM support working variables and 128 bytes of EEPROM provide nonvolatile data storage. Dual USART channels allow simultaneous serial communication, while I2C and SPI support bus-based sensors, memories, and external peripherals. An industrial temperature rating extending to 125°C supports demanding embedded environments. The ATTINY426-SF combines a compact 20-pin SOIC footprint with 18 general-purpose I/O lines. This pin count provides access to digital interfaces while retaining a through-hole-friendly package for prototypes, hand assembly, and mixed-technology assemblies. The multiple serial peripherals reduce the need for external interface devices, which can simplify PCB routing and conserve board area in control, sensing, and communication modules. Typical uses include industrial sensor controllers, compact serial bridges, motor and actuator control nodes, LED-signage controllers, and low-cost connected equipment. The dual USART interfaces are particularly useful when a design must retain a programming or service channel while another port handles field communication. The I2C and SPI peripherals can connect local sensors, analog converters, or nonvolatile memory without requiring external interface glue. Designers should preserve the manufacturer-recommended decoupling and oscillator arrangements, validate all peripheral pin multiplexing before final routing, and check the complete pin-description table in the ATtiny424/426/427/824/826/827 datasheet. When firmware depends on exact timer, USART, or event-system behavior, confirm that the selected replacement retains the same peripheral configuration and package pin assignment. This page combines manufacturer specifications, package and interface details, application guidance, comparison parameters, and practical design notes in one engineering-focused reference. It helps engineers evaluate the ATTINY426-SF for compact AVR-based control systems while distinguishing genuine same-package replacements from devices that require different footprints or board-level redesign.

Permintaan RFG Kontak
ATTINY426-SU - 20MHz tinyAVR 2 MCU, 4KB Flash | Microchip
ATTINY426-SU

ATTINY426-SU - 20MHz tinyAVR 2 MCU, 4KB Flash | Microchip

The Microchip Technology ATTINY426-SU is an 8-bit tinyAVR 2 microcontroller with a 20 MHz maximum clock, 4 KB of Flash program memory, 512 bytes of SRAM, and 128 bytes of EEPROM in a 20-pin SOIC package. It uses an AVR CPU with a hardware multiplier and supports operation from 2.5 V, 3.3 V, or 5 V, making it suitable for compact embedded-control systems that require low power consumption and deterministic peripheral integration. A microcontroller is a semiconductor that combines a CPU, nonvolatile program memory, working memory, and peripherals on one integrated circuit. The ATTINY426 belongs to the tinyAVR 2 family, which sits within Microchip's AVR 8-bit architecture. Compared with larger application-specific processors, this device provides a compact platform for reading sensors, controlling actuators, sequencing operations, and communicating through serial interfaces while conserving board area and system power. The device combines 4 KB of Flash for firmware, 512 bytes of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter storage. Its maximum 20 MHz operating frequency supports faster control-loop execution than lower-frequency microcontrollers, while the hardware multiplier accelerates multiply operations. The 2.5 V, 3.3 V, and 5 V operating options allow the same device family to address both industrial and low-voltage consumer equipment. The ATTINY426 family uses Microchip's flexible, low-power tinyAVR 2 architecture and includes an Event System according to the family datasheet. The architecture is intended for embedded designs that require event-driven control, compact timing resources, and a balance between processing throughput and power efficiency. The SOIC package also offers a mechanically accessible alternative to very-small VQFN and SSOP options when inspection or hand assembly is important. Typical applications include industrial control modules, building-automation endpoints, compact sensor-hub controllers, LED lighting controllers, motor-control auxiliaries, and low-power IoT nodes. Its combination of serial communications, EEPROM, and moderate SRAM is especially useful in compact products that must retain calibration values or configuration information through a power interruption. PCB implementation should preserve short return paths for digital signals, provide appropriate local decoupling at the supply pins, and route sensitive analog or communications interfaces away from high-current switching nodes. Firmware should also remain within the 4 KB Flash and 512-byte SRAM limits, with interrupt service routines and stack use checked during resource planning. This page combines the manufacturer's core electrical and memory specifications with practical application guidance, package details, datasheet references, and design considerations. It focuses on engineering decisions that help engineers assess whether the ATTINY426-SU provides enough performance, memory, and peripheral capability without moving to a larger microcontroller architecture.

Permintaan RFG Kontak
ATTINY426-XF - 20MHz 4KB AVR MCU | Microchip Technology
ATTINY426-XF

ATTINY426-XF - 20MHz 4KB AVR MCU | Microchip Technology

Microchip Technology ATTINY426-XF is an 8-bit tinyAVR 2 microcontroller with an AVR CPU and hardware multiplier, operating up to 20 MHz, with 4 KB Flash memory, 512 bytes SRAM, and 128 bytes EEPROM in a 20-pin SSOP package. The device combines a compact general-purpose control architecture with event systems and low-power design options for embedded control, industrial automation, consumer equipment, and connected products. A microcontroller is a compact semiconductor that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and input/output ports into one device. The tinyAVR 2 family belongs to the broader AVR microcontroller hierarchy, combining an 8-bit RISC architecture with event-driven peripherals and flexible low-power operation. This makes the family suitable for systems that need deterministic peripheral handling without the cost and complexity of a larger general-purpose processor. The ATTINY426 provides 4 KB of Flash for firmware, 512 bytes of SRAM for working data, and 128 bytes of nonvolatile EEPROM for configuration or retained parameters. Its AVR CPU includes a hardware multiplier and can run at up to 20 MHz. The manufacturer family documentation also identifies flexible low-power architecture, an Event System, and pin-count options ranging from 14 to 24 pins for related family members. The ATTINY426-XF is specified in a 20-pin SSOP package, making it suitable for compact PCB layouts where gull-wing leads are easier to inspect and assemble than fine-pitch QFN leads. Its 8-bit architecture is appropriate for supervisory functions, button and menu interfaces, sensor conditioning, actuator timing, communications, and embedded control loops. Compared with larger MCUs, the device limits application complexity while providing enough memory and processing speed for compact control tasks. Typical uses include industrial sensor modules, motor-control helpers, power-supply controllers, building automation, appliance control, and low-cost connected devices. Designers should confirm peripheral assignments, clock configuration, pin multiplexing, and programming requirements against the manufacturer data sheet before committing a footprint. The SSOP outline also provides adequate lead pitch for conventional assembly methods, although exposed-pad thermal considerations do not apply to this package. When designing around the ATTINY426-XF, treat power consumption and clock choice as part of the functional specification. A lower clock rate can reduce dynamic power consumption when the application does not require 20 MHz operation, while sleep modes and event-driven peripherals can reduce activity between external events. Decoupling capacitors should be placed directly beside the supply pins, and unused inputs should be configured to avoid floating states. This product page combines the manufacturer family specification, package and memory details, source citations, replacement guidance, and practical design considerations. It also distinguishes same-family alternatives from a true cross-brand replacement, helping engineers evaluate MCU migration requirements without overlooking pin compatibility, firmware differences, peripheral assignments, or qualification constraints.

Permintaan RFG Kontak
ATTINY426-XU - 20MHz 4KB AVR Microcontroller | Microchip
ATTINY426-XU

ATTINY426-XU - 20MHz 4KB AVR Microcontroller | Microchip

The Microchip Technology ATTINY426-XU is an 8-bit tinyAVR 2 microcontroller with a 20 MHz AVR CPU, 4 KB of Flash program memory, 512 bytes of SRAM, and 128 bytes of EEPROM in a 20-pin SSOP package. Its operating supply range is 1.8 V to 5.5 V, with frequency options of 5 MHz at 1.8 V, 10 MHz at 2.7 V, and 20 MHz for higher operating voltages. A microcontroller is a compact programmable controller that combines a processor core, nonvolatile program memory, data memory, and peripherals such as timers and serial interfaces on one semiconductor die. The ATTINY426 belongs to the tinyAVR 2 hierarchy: tinyAVR 2 microcontroller, 8-bit AVR RISC core, embedded microcontroller, and semiconductor. It is intended for compact control systems where a small footprint, low-power operation, and deterministic event handling are more important than high processing throughput. The AVR CPU includes a hardware multiplier and runs at up to 20 MHz. Four kilobytes of Flash support the boot program and application firmware, while 512 bytes of SRAM provide working memory and 128 bytes of EEPROM retain configuration values when the device is unpowered. The family also uses Microchip's event system and flexible low-power peripherals, allowing software-driven responses to external signals without continuous polling. The ATTINY426 is available in 14-pin, 20-pin, and 24-pin package configurations, including VQFN 3 x 3 mm, SSOP, and SOIC options. The ATTINY426-XU ordering code selects the 20-pin SSOP implementation. Its compact package and broad voltage range suit embedded controls, consumer accessories, compact industrial modules, and battery-powered products where a higher-performance processor would add unnecessary cost, power, or board area. A practical design must preserve the SSOP footprint, pin assignment, clock configuration, and programming interface when creating a PCB. Designers should also include adequate decoupling, confirm the voltage required for the selected clock frequency, and avoid relying on internal EEPROM for frequently updated data because of its limited endurance. The manufacturer data sheet should be consulted for the complete pin description, electrical limits, and programming details. This product page combines the manufacturer specifications, package information, sourcing paths, and engineering guidance needed to evaluate the ATTINY426-XU. It also identifies where a genuine same-package drop-in substitution is appropriate and explains the limitations that matter when replacing a microcontroller in an existing design.

Permintaan RFG Kontak
ATTINY427-MF - 20MHz 4KB AVR Microcontroller | Microchip
ATTINY427-MF

ATTINY427-MF - 20MHz 4KB AVR Microcontroller | Microchip

Microchip Technology ATTINY427-MF is an 8-bit tinyAVR 2 microcontroller with a 20 MHz AVR CPU, 4 KB Flash memory, 512 B SRAM, and 128 B EEPROM in a 24-pin VQFN package measuring 4 x 4 mm. The device combines an AVR CPU with a hardware multiplier and Microchip's Core Independent Peripherals architecture for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one package. The ATTINY427 belongs to the tinyAVR 2 family, where tinyAVR denotes low-power 8-bit AVR devices and Core Independent Peripherals describe hardware functions that can perform tasks without continuous CPU intervention. This combination supports responsive control in compact industrial, consumer, and connected products. The ATTINY427 provides 4 KB of Flash for program storage, 512 B of SRAM for working data, and 128 B of EEPROM for nonvolatile parameter retention. Its AVR CPU runs at up to 20 MHz and includes a hardware multiplier, supporting efficient 8-bit control calculations. The 24-pin VQFN offers a compact 4 x 4 mm footprint for space-constrained boards while providing the interface options expected from the tinyAVR 2 family. According to the Microchip ATtiny424/426/427/824/826/827 data sheet, the family uses a flexible, low-power architecture that includes Event Control, permitting peripherals to communicate directly with each other and reducing the processing burden on the CPU. This architecture is particularly useful for routine control loops where timer, communication, and interface events must be handled predictably without excessive polling. Typical applications include compact sensor controllers, building and industrial automation modules, appliance control boards, battery-powered accessories, LED lighting controllers, and low-cost communication nodes. The small package and mixed analog and digital control resources make the ATTINY427 suitable for designs that need more flexibility than a fixed-function logic device but less overhead than a larger general-purpose microcontroller. When laying out a board, follow the pin-description table and recommended land pattern in the manufacturer data sheet for the 24-pin VQFN package. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and verify programming, clock, reset, and peripheral connections before releasing the PCB layout for production. This product record combines the manufacturer specifications with package information, design guidance, source links, and a direct comparison framework. It is intended to help engineers determine whether the ATTINY427's memory capacity, 20 MHz execution rate, and compact VQFN footprint satisfy an embedded-control requirement without paying for a larger microcontroller platform.

Permintaan RFG Kontak
ATTINY427-MU - 20MHz 8-Bit AVR MCU | Microchip Technology
ATTINY427-MU

ATTINY427-MU - 20MHz 8-Bit AVR MCU | Microchip Technology

The Microchip Technology ATTINY427-MU is an 8-bit AVR tinyAVR 2 microcontroller with a 20 MHz maximum clock, 4 KB Flash memory, 512 B SRAM, and 128 B EEPROM in a 24-pin VQFN package measuring 4 x 4 mm. The device includes an AVR CPU with a hardware multiplier and uses Microchip's Core Independent Peripherals architecture. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and dedicated peripherals on one semiconductor die. The ATtiny427 belongs to the hierarchy of 8-bit MCU > tinyAVR microcontroller > AVR architecture > embedded controller > semiconductor. Its compact package and low-memory architecture suit embedded control, sensing, communications, and automation products where the application requires deterministic peripheral handling without a high-power application processor. The ATTINY427-MU's headline characteristics are its 20 MHz operating speed, 4 KB program Flash, and 24-pin 4 x 4 mm VQFN package. The AVR CPU includes a hardware multiplier, allowing supported multiply operations to execute more efficiently than software-emulated multiplication. Event System support and Core Independent Peripherals help offload timing, signal-generation, and data-acquisition tasks from the CPU. Microchip's ATtiny424, ATtiny426, ATtiny427, ATtiny824, ATtiny826, and ATtiny827 family shares a flexible, low-power architecture. The ATtiny427 specifically combines 4 KB Flash with 512 B SRAM and 128 B EEPROM. Because these resources are modest, firmware should avoid unnecessary library duplication and large buffering structures, while event-driven design can improve responsiveness and energy efficiency. Typical uses include compact industrial controllers, digital measurement equipment, low-speed communication nodes, smart sensors, LED-control systems, and small motor-control or actuator-control products. The 4 x 4 mm VQFN footprint supports compact PCB designs, although its fine pitch requires careful land-pattern assembly and adequate exposed-pad thermal management. When laying out a board, place decoupling capacitance at each supply pin and preserve the manufacturer's recommended VQFN footprint, solder-mask, and exposed-pad geometry. Confirm all peripheral pin multiplexing against the ATtiny424/426/427/824/826/827 datasheet before finalizing routing, because alternate-function signals can constrain board-level connectivity. This product page combines the manufacturer device specifications, package and memory details, application guidance, and verified drop-in replacement review. It also provides engineering-focused comparison and design notes intended to clarify board reuse, firmware constraints, and device-selection trade-offs.

Permintaan RFG Kontak
ATTINY4313-PU - 20MHz AVR 8-Bit MCU | Microchip Technology
ATTINY4313-PU

ATTINY4313-PU - 20MHz AVR 8-Bit MCU | Microchip Technology

The Microchip Technology ATTINY4313-PU is a 20 MHz, 8-bit AVR RISC-based microcontroller with 4 KB of flash memory, 128 bytes of EEPROM, 128 bytes of SRAM, and 18 general-purpose I/O lines, housed in a 20-pin PDIP package. It operates across a 1.8 V to 5.5 V supply range and combines a compact pin count with two timer/counter blocks and a single-wire on-chip debug interface. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The ATtiny4313 belongs to the tinyAVR family, a subgroup of 8-bit AVR microcontrollers within the broader embedded-control and semiconductor hierarchy. Its RISC-based architecture executes compact instructions efficiently, making it suitable for cost-sensitive control tasks that do not require the processing power of a 32-bit system. Key features include 4 KB of program flash, 128 bytes of EEPROM for nonvolatile data, 128 bytes of SRAM for working memory, and up to 18 general-purpose I/O lines. The device supports a maximum clock frequency of 20 MHz and a 1.8 V to 5.5 V operating range. Two flexible timer/counter blocks support timing, event counting, and basic waveform-generation functions, while single-wire debug simplifies in-circuit programming and diagnosis. The ATTINY4313 uses the AVR enhanced RISC architecture with 32 general-purpose working registers. This architecture provides direct register-oriented operation, a compact instruction set, and efficient execution of embedded-control code. The device is also compatible at the code and pin level with the ATtiny2313 and ATtiny2313A families according to Microchip application note AVR538, making it a practical upgrade path when a design requires additional flash memory while retaining an established 20-pin layout. Typical applications include compact industrial controllers, small motor-control and timer modules, appliance interfaces, programmable logic controllers, instrumentation front ends, and low-power embedded-control nodes. Its 18 I/O lines provide enough connectivity for switches, sensors, indicators, actuators, and serial-interface peripherals while retaining an economical through-hole package for prototypes and manually assembled boards. Designers should verify oscillator, reset, programming-interface, and decoupling connections against the manufacturer pin-description table before layout. Because the PDIP package provides generous spacing and inspection access, it is especially suitable for educational prototypes, proof-of-concept assemblies, and moderate-volume production. A surface-mount package may be preferable where PCB area, height, or automated assembly dominates the mechanical design. This page combines the ATtiny4313 electrical characteristics with package guidance, drop-in migration options, and practical application context. It also identifies the ATtiny2313 and ATtiny2313A as code- and pin-compatible migration devices, helping engineers preserve PCB continuity while increasing available program memory from the legacy family to 4 KB.

Permintaan RFG Kontak
ATTINY43U-MU - 8MHz 4KB AVR MCU | Microchip Technology
ATTINY43U-MU

ATTINY43U-MU - 8MHz 4KB AVR MCU | Microchip Technology

Microchip Technology ATTINY43U-MU is an ultra-low-voltage 8-bit AVR RISC microcontroller with an 8 MHz maximum clock, 4 KB Flash memory, 64 B EEPROM, and 256 B SRAM in a 20-QFN-EP 4 x 4 mm package. The device provides 16 general-purpose I/O lines, 32 working registers, and two 8-bit timer/counters with two PWM channels. An 8-bit microcontroller is a compact embedded-control processor that executes firmware to monitor inputs, control outputs, and manage system timing. The ATTINY43U belongs to the AVR family of RISC-based embedded processors, with the ATtiny43U positioned as a low-power, low-pin-count device for compact control systems. Its resource mix of Flash program memory, EEPROM, and SRAM supports small control loops, parameter storage, and modest working-data requirements. Key features include 4 KB of Flash program memory, 64 B of EEPROM, 256 B of SRAM, and 16 general-purpose I/O lines. Two 8-bit timer/counters provide two PWM channels for timing and basic proportional-control functions. The manufacturer describes an advanced RISC architecture with 120 instructions, most of which execute in a single clock cycle, supporting an execution rate approaching 1 MIPS per MHz. The ATTINY43U uses the AVR8 architecture and is designed for low-voltage, low-power embedded control. Its 20-QFN-EP package provides 16 I/O capabilities while minimizing PCB area. The exposed-pad package designation supports compact surface-mount construction, although final thermal performance depends on the PCB copper and power dissipation of the selected operating mode. Typical applications include compact sensor interfaces, simple motor and actuator controllers, low-power condition-monitoring modules, industrial control tiles, and battery-operated equipment. In each case, the 8 MHz AVR core and small memory footprint are suitable for local control functions where a higher-performance MCU, larger memory system, or more complex package would add unnecessary cost or space. Designers should verify the complete electrical limits, ADC behavior, clock options, pin multiplexing, and exposed-pad connection directly against the manufacturer datasheet before layout. Because the 16 I/O lines share pins with specialized functions, peripheral assignments must be checked against the required application and board-level routing. This page consolidates verified manufacturer and distributor information for the ATTINY43U-MU, including memory characteristics, package details, sourcing links, application guidance, and documented gaps where complete electrical data was not present in the supplied search results.

Permintaan RFG Kontak