Produk (22.000+)

ATXMEGA64B1-CU - 32MHz 64KB Flash MCU | Microchip Technology
ATXMEGA64B1-CU

ATXMEGA64B1-CU - 32MHz 64KB Flash MCU | Microchip Technology

The Microchip Technology ATXMEGA64B1-CU is an 8/16-bit AVR XMEGA B1 microcontroller with a 32 MHz maximum clock, 64 KB of flash memory organized as 32K x 16, and a 100-CBGA (9x9 mm) package. Its operating-voltage range is 1.6 V to 3.6 V. The device is identified by distributor listings as industrial-temperature, green, and suitable for USB-connected embedded systems requiring a compact 100-ball package. An AVR XMEGA microcontroller is a member of the embedded microcontroller hierarchy: MCU > 8/16-bit microcontroller > AVR XMEGA > mixed-signal embedded controller. It combines a programmable core, nonvolatile program memory, data memory, communication peripherals, and analog functions on one integrated circuit. The ATXMEGA64B1-CU is therefore appropriate when a design needs moderate flash capacity, multiple serial interfaces, USB connectivity, and a small component footprint rather than a general-purpose host processor. Key features include 32 MHz operation, 64 KB flash, 4 KB SRAM, 2 KB EEPROM, and a 1.6 V to 3.6 V supply range. Verified listings also identify USB 2.0 device, I2C, SPI, and UART interfaces. The 100-CBGA package provides 100 terminals in a 9x9 mm body, making the part suitable for compact industrial, utility-metering, home-automation, climate-control, medical, and USB-connectivity equipment. The 8/16-bit architecture supports both compact 8-bit instructions and enhanced 16-bit operations, allowing code density to be balanced against processing requirements. Its 64 KB flash provides substantially more program storage than the smallest XMEGA devices, while 4 KB SRAM and 2 KB EEPROM support working data and nonvolatile configuration. USB connectivity can simplify direct host-to-device communication without requiring a separate USB interface IC. Typical applications include utility metering, home automation, climate-control panels, industrial controllers, sports equipment, eTokens, medical devices, USB-connected accessories, power tools, and fire-alarm systems. These uses benefit from the combination of embedded processing, USB, serial interfaces, and a compact 100-ball package. Industrial-temperature identification is important for deployments expected to operate beyond consumer-temperature environments. Designers should review the exact pin configuration, exposed-pad requirements, clock options, USB transceiver characteristics, decoupling values, and programming interface against the manufacturer documentation before layout release. The 100-CBGA package also requires assembly capability for fine-pitch ball-grid-array inspection and soldering. Component availability and the listed $7.3475 unit price should be confirmed at purchase. This page consolidates verified distributor specifications, sourcing links, package details, pricing information, and application guidance. It also distinguishes genuine same-package family alternatives from generic functional substitutes so engineers can assess memory differences, peripheral compatibility, and PCB-reuse risk before selecting a replacement.

Permintaan RFG Kontak
ATXMEGA64B1-CUR - 32MHz 64KB Flash MCU | Microchip Technology (Tape & Reel)
ATXMEGA64B1-CUR

ATXMEGA64B1-CUR - 32MHz 64KB Flash MCU | Microchip Technology (Tape & Reel)

The Microchip Technology ATXMEGA64B1-CUR is an 8/16-bit AVR XMEGA B1 microcontroller with a 32 MHz maximum clock, 64 KB of flash memory organized as 32K x 16, and a 100-CBGA (9x9 mm) package. Its operating-voltage range is 1.6 V to 3.6 V. The device is identified by distributor listings as industrial-temperature, green, and suitable for USB-connected embedded systems requiring a compact 100-ball package. An AVR XMEGA microcontroller is a member of the embedded microcontroller hierarchy: MCU > 8/16-bit microcontroller > AVR XMEGA > mixed-signal embedded controller. It combines a programmable core, nonvolatile program memory, data memory, communication peripherals, and analog functions on one integrated circuit. The ATXMEGA64B1-CUR is therefore appropriate when a design needs moderate flash capacity, multiple serial interfaces, USB connectivity, and a small component footprint rather than a general-purpose host processor. Key features include 32 MHz operation, 64 KB flash, 4 KB SRAM, 2 KB EEPROM, and a 1.6 V to 3.6 V supply range. Verified listings also identify USB 2.0 device, I2C, SPI, and UART interfaces. The 100-CBGA package provides 100 terminals in a 9x9 mm body, making the part suitable for compact industrial, utility-metering, home-automation, climate-control, medical, and USB-connectivity equipment. The 8/16-bit architecture supports both compact 8-bit instructions and enhanced 16-bit operations, allowing code density to be balanced against processing requirements. Its 64 KB flash provides substantially more program storage than the smallest XMEGA devices, while 4 KB SRAM and 2 KB EEPROM support working data and nonvolatile configuration. USB connectivity can simplify direct host-to-device communication without requiring a separate USB interface IC. Typical applications include utility metering, home automation, climate-control panels, industrial controllers, sports equipment, eTokens, medical devices, USB-connected accessories, power tools, and fire-alarm systems. These uses benefit from the combination of embedded processing, USB, serial interfaces, and a compact 100-ball package. Industrial-temperature identification is important for deployments expected to operate beyond consumer-temperature environments. Designers should review the exact pin configuration, exposed-pad requirements, clock options, USB transceiver characteristics, decoupling values, and programming interface against the manufacturer documentation before layout release. The 100-CBGA package also requires assembly capability for fine-pitch ball-grid-array inspection and soldering. Component availability and the listed $7.3475 unit price should be confirmed at purchase. This page consolidates verified distributor specifications, sourcing links, package details, pricing information, and application guidance. It also distinguishes genuine same-package family alternatives from generic functional substitutes so engineers can assess memory differences, peripheral compatibility, and PCB-reuse risk before selecting a replacement.

Permintaan RFG Kontak
ATXMEGA64B3-AN - 32MHz 64KB USB MCU | Microchip | TQFP
ATXMEGA64B3-AN

ATXMEGA64B3-AN - 32MHz 64KB USB MCU | Microchip | TQFP

Microchip Technology ATXMEGA64B3-AN is an 8/16-bit AVR XMEGA B3 microcontroller with a 32 MHz operating frequency, 64 KB of self-programming Flash memory, 4 KB of SRAM, and a 64-TQFP package measuring 14 x 14 mm. It also provides a USB Full Speed Device interface, a two-channel DMA controller, a four-channel event system, and an LCD controller capable of driving up to a 4 x 25 segment display. An 8/16-bit microcontroller is a programmable semiconductor that executes firmware, monitors inputs, and controls system peripherals. The AVR XMEGA B3 architecture combines a modified Harvard memory organization, self-programmable Flash, EEPROM, SRAM, hardware multipliers, and event-system peripherals in a single integrated circuit. It occupies the microcontroller category within embedded processing and is suitable for compact control systems that need more peripherals than a basic general-purpose microcontroller. The ATXMEGA64B3-AN operates at up to 32 MHz and reaches up to 32 MIPS throughput. Its 64 KB self-programming Flash includes a 4 KB boot-code section, while 4 KB of SRAM and 2 KB of EEPROM support working data, parameter storage, and state retention. A two-channel DMA controller can move data with less processor intervention, and the four-channel event system can trigger actions directly between hardware peripherals. Its integrated USB Full Speed Device controller enables USB connectivity without a separate interface controller. The four-times-25-segment LCD controller supports segmented human-machine interfaces without requiring an external display driver. These resources are useful when a compact product must combine local controls, data acquisition, communications, and real-time peripheral coordination. Typical uses include utility metering, home automation, climate control, industrial control, sports equipment, medical devices, USB-connected products, power tools, and fire-alarm systems. For example, an energy meter can use the LCD controller for a local display, the event system for periodic measurement timing, the DMA channels for data movement, and USB for configuration or data transfer. PCB design should preserve the pin assignments, power requirements, clock network, and USB routing specified by the Microchip manufacturer datasheet. Place decoupling capacitors close to the supply pins, provide clean grounding around the USB interface, and verify signal integrity before finalizing a high-speed or externally exposed design. The 64-TQFP footprint also requires adequate assembly clearance around all four sides. This product page organizes the ATXMEGA64B3-AN specifications, package information, application guidance, and sourcing path into one engineering reference. It also identifies the practical functional gaps that must be checked before treating another AVR or XMEGA device as a drop-in replacement.

Permintaan RFG Kontak
ATXMEGA64B3-AU - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64B3-AU

ATXMEGA64B3-AU - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64B3-AU is a low-power, high-performance 8/16-bit AVR XMEGA microcontroller with 64 KB of self-programming Flash, 4 KB of SRAM, 2 KB of EEPROM, and operation up to 32 MHz, housed in a 64-pin TQFP package. It reaches up to 32 MIPS and integrates a USB Full-Speed Device controller, a two-channel DMA controller, a four-channel event system, a four-times-25-segment LCD controller, and a programmable multilevel interrupt controller. An 8/16-bit microcontroller is a compact computing platform that combines a CPU, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one semiconductor die. The ATxmega64B3 belongs to the AVR XMEGA family of 8-bit microcontrollers, combining an enhanced RISC architecture with high-resolution timers, flexible event handling, USB connectivity, and mixed-signal-oriented peripherals. This hierarchy places it above simple logic controllers and makes it suitable for embedded control systems requiring deterministic peripheral coordination. Key device features include 36 general-purpose I/O lines, read-while-write Flash operation, internal EEPROM and SRAM, and hardware support for real-time counter functions. According to the Microchip ATxmega64B3 product page, the device supports applications including utility metering, home automation, climate control, industrial control, sports equipment, toys, electronic tokens, medical equipment, USB connectivity, power tools, and fire-alarm systems. The B3 series is specifically offered in 64-pin packages. Technically, the ATxmega64B3 architecture combines an AVR enhanced RISC core with dedicated event-system channels, DMA transfers, and a multilevel interrupt controller. DMA can move data without occupying the CPU for every transfer, while the event system links timers, comparator, and other peripherals through hardware signals. This is useful in control and measurement designs where predictable timing, concurrent sensing, and low CPU overhead are more important than maximum general-purpose processing performance. Typical implementations include utility and energy meters, USB-connected control nodes, home-automation panels, climate-control equipment, industrial controllers, and compact human-interface systems with segment LCD displays. The LCD controller and USB interface allow a single device to manage local operator feedback and a host-side data connection. For battery-powered products, the low-power operating modes remain useful, although sleep-current figures and active-current limits should be selected from the device-specific electrical tables. When designing a PCB, reserve the 64-pin TQFP land pattern, provide clean supply decoupling at the appropriate power pins, and route USB D+ and D- as a controlled-impedance differential pair. USB clock, data, and ground returns require careful layout, while unused I/O pins should be left according to the manufacturer's pin-description guidance. Confirm programming, bootloader, clock, and peripheral multiplexing before finalizing the board. This product page consolidates the manufacturer overview, distributor identification, package details, drop-in candidates, application guidance, and practical layout considerations. It supports faster engineering decisions by separating core MCU resources from the USB, LCD, DMA, event-system, memory, and interface constraints that determine whether the ATXMEGA64B3-AU fits a new design.

Permintaan RFG Kontak
ATXMEGA64B3-MH - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64B3-MH

ATXMEGA64B3-MH - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64B3-MH is an 8/16-bit AVR XMEGA B3 microcontroller with a 32 MHz maximum clock, 64 KB self-programming Flash memory, 4 KB SRAM, 2 KB EEPROM, USB Full-Speed device support, and a 64-QFN (9x9) package. According to the manufacturer product information, it also includes a 4 KB boot-code section, a two-channel DMA controller, a four-channel event system, and a 4x25 segment LCD controller. The device provides up to 32 MIPS throughput at 32 MHz. An 8/16-bit AVR microcontroller is a programmable semiconductor that combines a CPU core, embedded Flash program memory, data memory, peripherals, and communication interfaces in one package. The ATXMEGA B3 family belongs to the AVR microcontroller, embedded processor, and 8/16-bit MCU hierarchy. Its combination of self-programming Flash, EEPROM, DMA, event-system hardware, USB connectivity, and LCD control makes it suitable for compact embedded systems that need deterministic peripheral handling without a separate host processor. Key features include 64 KB of Flash for firmware, 4 KB of SRAM, and 2 KB of nonvolatile EEPROM. The USB Full-Speed interface supports direct USB-connected equipment, while the DMA controller and event system allow data movement and peripheral events to be handled more efficiently by the CPU. The integrated 4x25 segment LCD controller can drive suitable segmented displays, reducing the need for external display-driver ICs in metering and human-interface designs. The ATXMEGA64B3 architecture combines an AVR CPU operating at up to 32 MHz with dedicated event, DMA, timer, communications, and USB resources. Its maximum throughput of 32 MIPS supports responsive control and data-processing tasks. The device is available in a 64-QFN (9x9) package, making it appropriate for compact, surface-mounted industrial, utility-metering, home-automation, medical, and USB-connectivity products where board area is constrained. Typical applications include utility meters, home-automation controllers, climate-control panels, industrial controls, sports equipment, electronic tokens, medical equipment, USB connectivity products, power tools, and fire-alarm systems. Its integrated USB device interface is particularly useful for configuration, firmware update, data logging, or direct connectivity to a host system. When designing a PCB around ATXMEGA64B3-MH, follow the manufacturer pin, package, decoupling, and layout instructions exactly. Check voltage limits and exposed-pad requirements in the datasheet, preserve the power and ground distribution architecture, and validate USB signal routing and firmware support for the intended host. Use the manufacturer datasheet pin-description table when assigning tracks and programming the device. This product page combines manufacturer specifications, distributor package and availability details, practical application guidance, design cautions, and same-family replacement analysis. It is intended to help engineers identify whether the ATXMEGA64B3-MH architecture, memory configuration, package, USB capability, and peripheral mix fit a specific embedded design before finalizing the schematic and firmware.

Permintaan RFG Kontak
ATXMEGA64B3-MN 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64B3-MN

ATXMEGA64B3-MN 32MHz 64KB AVR Microcontroller | Microchip

The Microchip ATXMEGA64B3-MN is a low-power, high-performance 8/16-bit AVR microcontroller with 64 KB of self-programming Flash memory, 4 KB of SRAM, 2 KB of EEPROM, and up to 32 MIPS throughput at 32 MHz. It is supplied in a 64-pin QFN package with an exposed pad and operates from 1.6 V to 3.6 V. The device also includes a 4 KB boot-code section, a two-channel DMA controller, a four-channel event system, and a USB full-speed device interface. An 8/16-bit AVR microcontroller combines a RISC processor core, embedded Flash program memory, SRAM, EEPROM, and dedicated peripherals on one integrated circuit. These devices occupy the microcontroller level of the embedded-computing hierarchy and can provide a compact, low-power control platform for consumer equipment, industrial products, communications equipment, and human-interface devices. The ATxmega B3 family supports both standalone USB connectivity and segmented LCD control in the same device. The ATXMEGA64B3-MN provides 64 KB of self-programming Flash with read-while-write capability, including a dedicated 4 KB boot-code section. Its 4 KB SRAM supports working data, while 2 KB of internal EEPROM provides nonvolatile storage without an external memory component. The two-channel DMA controller and four-channel event system can transfer data and route events between peripherals, reducing processor intervention in timing-sensitive designs. The USB full-speed device interface supports direct USB connectivity, while the integrated LCD controller can drive up to four by 25 segments. The processor supports up to 32 MIPS at 32 MHz, giving it substantially more performance headroom than a conventional 8-bit AVR device while retaining the familiar AVR instruction set and peripheral ecosystem. Thirty-six general-purpose I/O lines are identified for the ATxmega64B3 family in the manufacturer documentation. Typical uses include USB-connected human-interface devices, segmented display controllers, industrial control panels, compact data-acquisition equipment, and embedded accessories that need local data storage. The boot-code section can support controlled startup or firmware-update workflows, while internal EEPROM is useful for calibration values, configuration data, and counters that must survive power cycles. Design with the 1.6 V to 3.6 V operating range in mind, particularly when using USB-powered equipment. The 64-pin QFN package requires careful PCB layout, adequate thermal-via placement beneath the exposed pad, and attention to high-speed USB routing. The listed 105°C maximum temperature identifies the device as suitable for demanding industrial-temperature designs when the complete system and board materials support that range. This product page combines the manufacturer's core device characteristics with application guidance, package considerations, sourcing information, and an explicit assessment of drop-in replacement availability. Because pin-compatible alternatives must match the exact QFN footprint and electrical behavior, no substitute is presented unless its compatibility can be substantiated.

Permintaan RFG Kontak
ATXMEGA64B3-MUR - 32MHz 64KB AVR MCU | Microchip Technology
ATXMEGA64B3-MUR

ATXMEGA64B3-MUR - 32MHz 64KB AVR MCU | Microchip Technology

The Microchip Technology ATXMEGA64B3-MUR is an 8/16-bit AVR XMEGA B3 microcontroller with a 32 MHz operating frequency, 64 KB of flash program memory organized as 32K × 16 words, and a 64-QFN 9 × 9 mm package. It combines an enhanced RISC AVR core with integrated mixed-signal and communication peripherals for compact embedded control systems. An AVR XMEGA microcontroller is an 8-bit RISC microcontroller family that combines embedded processing with analog and digital peripherals in one device. Within the product hierarchy, the ATXMEGA64B3 belongs to the AVR XMEGA B3 series, the XMEGA family, the AVR microcontrollers, and the broader semiconductor category. This integration allows a design to replace several separate discrete interface, control, and conversion devices. Key device characteristics include 32 MHz processing, 64 KB flash, 4 KB SRAM, 2 KB EEPROM, and operation from 1.6 V to 3.6 V. The 64-pin package provides 36 I/O pins and supports communication functions including UART, SPI, and TWI. These resources are suitable for applications requiring moderate processing throughput, data logging, mixed-signal measurement, and multiple serial interfaces. The ATXMEGA64B3 architecture provides a 32 MHz clock path and 16-bit working register organization while retaining an efficient 8-bit instruction set. The 32K × 16 flash organization supports efficient access to 16-bit program words. On-chip SRAM supports working data and stack operations, while EEPROM provides nonvolatile storage for calibration values, configuration parameters, and operating counters. Typical uses include utility metering, home automation, climate control, industrial control, medical equipment, USB connectivity, power tools, and fire-alarm systems. Its combination of 36 I/O pins and integrated analog and serial peripherals is particularly useful when a compact controller must manage sensors, actuators, communications, and local data storage. PCB design should account for the exposed thermal pad, clean supply and ground distribution, and decoupling close to the power pins. Designers should also verify the complete pin description table in the manufacturer datasheet, especially for analog inputs, alternate peripheral functions, power pins, and the exposed pad before assigning tracks. This product page combines the verified device identity, package information, memory characteristics, and manufacturer application information with drop-in alternatives, comparison parameters, and practical PCB guidance. It is designed to help engineers assess the ATXMEGA64B3-MUR for new designs or footprint-compatible replacements without overlooking peripheral, qualification, or temperature-range differences.

Permintaan RFG Kontak
ATXMEGA64C3-AN - 32MHz 64KB AVR XMEGA | Microchip
ATXMEGA64C3-AN

ATXMEGA64C3-AN - 32MHz 64KB AVR XMEGA | Microchip

The Microchip Technology ATXMEGA64C3-AN is a low-power 8/16-bit AVR XMEGA microcontroller with 64 KB in-system programmable Flash memory, 2 KB EEPROM, 4 KB SRAM, and a maximum clock frequency of 32 MHz. It is packaged in a 64-pin TQFP measuring 14 x 14 mm and operates from 1.6 V to 3.6 V. The MCU also includes a four-channel event system and read-while-write Flash capabilities. An 8/16-bit AVR XMEGA microcontroller is an embedded processing device that combines a Harvard-style AVR architecture, programmable Flash memory, data EEPROM, SRAM, event handling, interrupts, and multiple digital and analog peripherals. XMEGA devices sit between simple 8-bit microcontrollers and more complex 32-bit processors, offering deterministic event-driven behavior and a broad peripheral set for compact control systems. The ATXMEGA64C3-AN provides 64 KB of in-system programmable Flash, including an 8 KB boot-code section that supports read-while-write operation. Its 2 KB EEPROM retains configuration and calibration parameters without occupying SRAM, while 4 KB of SRAM supports protocol parsing, data acquisition, control state, and stack operations. The 32 MHz operating frequency provides additional timing margin for communication, sampling, and multi-peripheral workloads. Its four-channel event system allows signals from timers, analog comparators, input-change interrupt sources, and other peripherals to trigger actions through a configurable event routing matrix. This hardware event path reduces polling overhead and helps designers implement responsive control without routing every event through the CPU. The device also supports a programmable multilevel interrupt controller for organized handling of concurrent peripheral events. Typical uses include industrial control modules, data acquisition systems, sensor interfaces, communication equipment, compact industrial automation, and embedded consumer devices. Its combination of EEPROM, SRAM, event-system hardware, and a 1.6 V to 3.6 V supply range is useful where peripheral integration and deterministic event handling matter more than a large general-purpose processor core. When designing the PCB, reserve the 64-pin TQFP footprint, verify the pin assignments for the selected peripherals, and route clock, programming, and decoupling connections according to the manufacturer pinout and layout guidance. Pay particular attention to startup behavior and the separation between high-current I/O paths and sensitive analog or clock nets. This product page combines the manufacturer specifications with practical device-selection guidance, application fit, package information, and a parameter comparison. It focuses on engineering characteristics that determine whether the ATXMEGA64C3-AN belongs on an existing 64-pin TQFP design and what must be checked before firmware or hardware changes are committed.

Permintaan RFG Kontak
ATXMEGA64C3-ANR - 32MHz 64KB AVR XMEGA | Microchip (Tape & Reel)
ATXMEGA64C3-ANR

ATXMEGA64C3-ANR - 32MHz 64KB AVR XMEGA | Microchip (Tape & Reel)

The Microchip Technology ATXMEGA64C3-ANR is a low-power 8/16-bit AVR XMEGA microcontroller with 64 KB in-system programmable Flash memory, 2 KB EEPROM, 4 KB SRAM, and a maximum clock frequency of 32 MHz. It is packaged in a 64-pin TQFP measuring 14 x 14 mm and operates from 1.6 V to 3.6 V. The MCU also includes a four-channel event system and read-while-write Flash capabilities. An 8/16-bit AVR XMEGA microcontroller is an embedded processing device that combines a Harvard-style AVR architecture, programmable Flash memory, data EEPROM, SRAM, event handling, interrupts, and multiple digital and analog peripherals. XMEGA devices sit between simple 8-bit microcontrollers and more complex 32-bit processors, offering deterministic event-driven behavior and a broad peripheral set for compact control systems. The ATXMEGA64C3-ANR provides 64 KB of in-system programmable Flash, including an 8 KB boot-code section that supports read-while-write operation. Its 2 KB EEPROM retains configuration and calibration parameters without occupying SRAM, while 4 KB of SRAM supports protocol parsing, data acquisition, control state, and stack operations. The 32 MHz operating frequency provides additional timing margin for communication, sampling, and multi-peripheral workloads. Its four-channel event system allows signals from timers, analog comparators, input-change interrupt sources, and other peripherals to trigger actions through a configurable event routing matrix. This hardware event path reduces polling overhead and helps designers implement responsive control without routing every event through the CPU. The device also supports a programmable multilevel interrupt controller for organized handling of concurrent peripheral events. Typical uses include industrial control modules, data acquisition systems, sensor interfaces, communication equipment, compact industrial automation, and embedded consumer devices. Its combination of EEPROM, SRAM, event-system hardware, and a 1.6 V to 3.6 V supply range is useful where peripheral integration and deterministic event handling matter more than a large general-purpose processor core. When designing the PCB, reserve the 64-pin TQFP footprint, verify the pin assignments for the selected peripherals, and route clock, programming, and decoupling connections according to the manufacturer pinout and layout guidance. Pay particular attention to startup behavior and the separation between high-current I/O paths and sensitive analog or clock nets. This product page combines the manufacturer specifications with practical device-selection guidance, application fit, package information, and a parameter comparison. It focuses on engineering characteristics that determine whether the ATXMEGA64C3-ANR belongs on an existing 64-pin TQFP design and what must be checked before firmware or hardware changes are committed.

Permintaan RFG Kontak
ATXMEGA64C3-AU - 32MHz 64KB 8/16-Bit MCU | Microchip
ATXMEGA64C3-AU

ATXMEGA64C3-AU - 32MHz 64KB 8/16-Bit MCU | Microchip

The Microchip Technology ATXMEGA64C3-AU is a high-performance, low-power 8/16-bit AVR XMEGA C3 microcontroller operating at up to 32 MHz, with 64 KB of in-system programmable Flash memory, 2 KB of EEPROM, and 4 KB of SRAM. It is supplied in a surface-mount 64-pin TQFP package measuring 14 x 14 mm. The 64 KB Flash includes an 8 KB boot-code section and supports read-while-write operation. An 8/16-bit microcontroller is a compact embedded-processing device that combines a CPU core, nonvolatile program memory, data memory, interrupt handling, and peripherals on one integrated circuit. The AVR enhanced RISC architecture belongs to the broader microcontroller hierarchy, where real-time control, low-power operation, and deterministic peripheral integration are central design requirements. The ATXMEGA64C3 family combines that processing platform with event-system and programmable interrupt capabilities. Key features include a four-channel event system, read-while-write Flash, 2 KB of EEPROM, and 4 KB of SRAM. Read-while-write capability can support firmware updates or data-storage operations without removing the device from its circuit, subject to the detailed restrictions and address regions described by Microchip. The four-channel event system provides hardware-assisted routing between peripherals, helping reduce processor overhead in timing-sensitive control systems. The device supports operating voltage options identified in the verified distributor data as 1.8 V, 2.5 V, and 3.3 V, while Mouser specifies an overall 1.6 V to 3.6 V range. This low-voltage operating envelope suits compact embedded equipment, portable instruments, sensor nodes, and industrial control modules. Its AVR instruction set and peripheral-rich architecture provide a practical balance between processing throughput, memory capacity, and low-power operation. Typical applications include industrial monitoring, low-power sensor interfaces, compact control panels, embedded measurement equipment, and communication-enabled control nodes. The 32 MHz clock rate supports responsive event handling and general-purpose control, while the 64 KB Flash provides useful space for application firmware, boot logic, and protocol handling. The integrated EEPROM is valuable for retaining calibration values, counters, configuration data, and audit records. Designers should select capacitors, clock circuitry, programming connections, and decoupling according to the manufacturer datasheet rather than relying only on distributor summaries. Because the verified data does not expose the complete pin map, exact I/O assignments, programming interface details, or operating-current figures, those values must be confirmed before PCB release. This page synthesizes the verified device identity, memory configuration, package information, event-system feature, sourcing links, and engineering-selection guidance without inventing unverified electrical details.

Permintaan RFG Kontak
ATXMEGA64C3-MH - AVR XMEGA 32MHz 64KB Flash MCU | Microchip
ATXMEGA64C3-MH

ATXMEGA64C3-MH - AVR XMEGA 32MHz 64KB Flash MCU | Microchip

The Microchip Technology (formerly Atmel) ATXMEGA64C3-MH is an 8/16-bit AVR XMEGA C3 microcontroller featuring 64KB in-system programmable Flash (with an 8KB boot section supporting read-while-write), 2KB EEPROM, and 4KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. An 8/16-bit microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), non-volatile data storage (EEPROM), and programmable peripherals on one die. Within the system hierarchy, the ATXMEGA64C3-MH sits as: microcontroller -> embedded MCU -> semiconductor IC. The XMEGA family is a superset of the AVR core architecture, adding a 4-channel event system, multi-level interrupt controller, and DMA controller to enable low-latency deterministic I/O without CPU intervention. Key features include 32 MHz maximum CPU clock from an internal 32 MHz calibrated oscillator (2% accuracy), 1.6V to 3.6V operating voltage, four 16-bit timer/counters, four USARTs, two I2C and SPI ports, a 12-channel 12-bit ADC, and a 2-channel 12-bit DAC. The device supports up to 78 general-purpose I/O pins and consumes only 9.2 mA active at 3V/32 MHz, making it suitable for battery-powered designs. Architecturally, the ATXMEGA64C3-MH implements the Harvard-style AVR XMEGA core with single-cycle ALU access to register file and Flash, a hardware multiply unit, and a peripheral event system that lets timers, ADCs, and communication peripherals trigger one another without software. The 12-bit ADC achieves up to 300 ksps with optional PGA-like input scaling, supporting sensor and instrumentation signal chains. Typical applications include industrial control and sensor nodes, USB HID/CDF bridges using the on-chip USB 2.0 full-speed controller, smart energy metering, motor control loops, and human-machine interface (HMI) boards. The wide operating voltage and Flash read-while-write capability also enable firmware-over-the-air (FOTA) bootloaders. When designing with this part, ensure decoupling of all VDDGND pairs with 100nF X7R ceramic capacitors placed within 3 mm of the package, route the exposed thermal pad to a continuous ground plane for VQFN heat dissipation, and configure PDI/PDO or JTAG pins as GPIO only when debug is permanently disabled. This page synthesizes distributor pricing, drop-in alternatives within the same VQFN-64 footprint, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
ATXMEGA64C3-MHR - AVR XMEGA 32MHz 64KB Flash MCU | Microchip (Tape & Reel)
ATXMEGA64C3-MHR

ATXMEGA64C3-MHR - AVR XMEGA 32MHz 64KB Flash MCU | Microchip (Tape & Reel)

The Microchip Technology (formerly Atmel) ATXMEGA64C3-MHR is an 8/16-bit AVR XMEGA C3 microcontroller featuring 64KB in-system programmable Flash (with an 8KB boot section supporting read-while-write), 2KB EEPROM, and 4KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. An 8/16-bit microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), non-volatile data storage (EEPROM), and programmable peripherals on one die. Within the system hierarchy, the ATXMEGA64C3-MHR sits as: microcontroller -> embedded MCU -> semiconductor IC. The XMEGA family is a superset of the AVR core architecture, adding a 4-channel event system, multi-level interrupt controller, and DMA controller to enable low-latency deterministic I/O without CPU intervention. Key features include 32 MHz maximum CPU clock from an internal 32 MHz calibrated oscillator (2% accuracy), 1.6V to 3.6V operating voltage, four 16-bit timer/counters, four USARTs, two I2C and SPI ports, a 12-channel 12-bit ADC, and a 2-channel 12-bit DAC. The device supports up to 78 general-purpose I/O pins and consumes only 9.2 mA active at 3V/32 MHz, making it suitable for battery-powered designs. Architecturally, the ATXMEGA64C3-MHR implements the Harvard-style AVR XMEGA core with single-cycle ALU access to register file and Flash, a hardware multiply unit, and a peripheral event system that lets timers, ADCs, and communication peripherals trigger one another without software. The 12-bit ADC achieves up to 300 ksps with optional PGA-like input scaling, supporting sensor and instrumentation signal chains. Typical applications include industrial control and sensor nodes, USB HID/CDF bridges using the on-chip USB 2.0 full-speed controller, smart energy metering, motor control loops, and human-machine interface (HMI) boards. The wide operating voltage and Flash read-while-write capability also enable firmware-over-the-air (FOTA) bootloaders. When designing with this part, ensure decoupling of all VDDGND pairs with 100nF X7R ceramic capacitors placed within 3 mm of the package, route the exposed thermal pad to a continuous ground plane for VQFN heat dissipation, and configure PDI/PDO or JTAG pins as GPIO only when debug is permanently disabled. This page synthesizes distributor pricing, drop-in alternatives within the same VQFN-64 footprint, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
ATXMEGA64C3-MN - 32MHz 64KB AVR MCU | Microchip
ATXMEGA64C3-MN

ATXMEGA64C3-MN - 32MHz 64KB AVR MCU | Microchip

The Microchip ATXMEGA64C3-MN is a low-power 8/16-bit AVR XMEGA microcontroller with a 32 MHz clock, 64 KB in-system programmable Flash memory, 2 KB EEPROM, and 4 KB SRAM. The device is offered in a 64-pin VFQFN package measuring 9 mm by 9 mm and operates from a 1.6 V to 3.6 V supply. Its memory supports read-while-write operation, while an 8 KB boot-code section supports protected startup and firmware-update workflows. An 8/16-bit microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals in one integrated circuit. The AVR enhanced RISC architecture used by the XMEGA family executes instructions in a single clock cycle. Within the product hierarchy, ATXMEGA64C3-MN belongs to the XMEGA C3 family of 8/16-bit microcontrollers, combining general-purpose embedded control with event-system, communications, analog, and timing resources. The 64 KB Flash program memory provides room for a bootloader and application firmware, including read-while-write operation in the application area. A dedicated 8 KB boot section allows critical code to be isolated from the main application. The 2 KB EEPROM supports nonvolatile parameter storage, while 4 KB SRAM provides working memory for stacks, buffers, communication frames, and real-time control data. The operating range of 1.6 V to 3.6 V supports low-voltage embedded systems. The integrated four-channel event system provides a hardware mechanism for deterministic inter-peripheral signaling and precise timing without requiring extensive central-processor intervention. This is valuable when an application must connect timers, counters, comparators, or communication events deterministically. The 32 MHz operating frequency also provides useful throughput for protocol handling, control loops, and user-interface logic while retaining the efficiency associated with an 8/16-bit architecture. Typical applications include industrial control modules, sensor hubs, building-automation nodes, compact data loggers, motor-control supervisory circuits, battery-powered instruments, and communication-enabled embedded equipment. In these systems, the microcontroller can manage mixed analog and digital functions, execute protocol stacks, and retain configuration data across power cycles. Its low-power operating characteristics are also useful for portable and energy-constrained products. PCB design should preserve the exposed-pad thermal and electrical requirements of the VFQFN package. Place the device-side bypass capacitors close to the appropriate supply pins, route sensitive signals away from switching nodes, and follow the manufacturer datasheet land pattern and thermal-via recommendations. Confirm the exact pin assignments and alternate-function limitations before assigning peripheral pins or planning a board revision. This page combines the manufacturer device specifications, practical package guidance, application-oriented engineering advice, and same-family drop-in alternatives to support faster component selection, schematic planning, PCB layout, and sourcing decisions for the ATXMEGA64C3-MN.

Permintaan RFG Kontak
ATXMEGA64D3-AN - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64D3-AN

ATXMEGA64D3-AN - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64D3-AN is an 8/16-bit AVR XMEGA D3 microcontroller with a 32 MHz clock, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and a 64-pin TQFP package measuring 14 mm by 14 mm. It combines a high-performance AVR enhanced RISC core with a rich set of timers, communication peripherals, and event-system resources for embedded control designs. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals into one device. The ATXMEGA64D3 belongs to the XMEGA family within the broader hierarchy of AVR microcontrollers, embedded processors, and semiconductor components. Its 16-bit timer and counter architecture supports precise measurement and control, while its 32 MHz operation provides useful performance headroom for industrial, communications, and consumer applications. The device includes 64 KB of ISP flash with read-while-write capability, including a dedicated 4 KB boot-code section. Its 2 KB EEPROM supports nonvolatile parameter storage, and its 4 KB SRAM provides working memory for control routines, buffering, and protocol handling. Fifty general-purpose I/O lines allow connection to sensors, displays, communication transceivers, and actuators without relying entirely on external peripheral devices. The peripheral set includes a four-channel event system, a programmable multilevel interrupt controller, a 16-bit real-time counter, and five flexible 16-bit timer/counters with compare and PWM modes. These resources enable deterministic event routing, accurate timing, motor-control functions, and multi-channel waveform generation. The event system is especially useful for synchronizing hardware actions independently of main-loop software scheduling. Typical applications include industrial controllers, data acquisition equipment, communications modules, motor-control systems, building automation, and low-power embedded products. The combination of XMEGA timing peripherals and 50 GPIO lines makes the microcontroller appropriate for systems that need deterministic peripheral behavior while retaining a modest, cost-conscious 8/16-bit architecture. Designers should pay close attention to supply voltage, clock configuration, programming interfaces, and decoupling when laying out a PCB. The manufacturer datasheet provides the authoritative pin descriptions, electrical limits, startup requirements, and programming connections for each 64-pin TQFP signal. Allow the configured operating voltage and required external components to remain within their specified limits across temperature and supply conditions. This page consolidates the device architecture, verified manufacturer characteristics, drop-in replacement assessment, application guidance, and practical PCB considerations into one engineering reference. It also distinguishes true pin-compatible substitutions from family members whose memory size, package code, qualification level, or peripheral configuration makes them unsuitable as direct replacements.

Permintaan RFG Kontak
ATXMEGA64D3-ANR - 32MHz 64KB AVR Microcontroller | Microchip (Tape & Reel)
ATXMEGA64D3-ANR

ATXMEGA64D3-ANR - 32MHz 64KB AVR Microcontroller | Microchip (Tape & Reel)

The Microchip Technology ATXMEGA64D3-ANR is an 8/16-bit AVR XMEGA D3 microcontroller with a 32 MHz clock, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and a 64-pin TQFP package measuring 14 mm by 14 mm. It combines a high-performance AVR enhanced RISC core with a rich set of timers, communication peripherals, and event-system resources for embedded control designs. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals into one device. The ATXMEGA64D3 belongs to the XMEGA family within the broader hierarchy of AVR microcontrollers, embedded processors, and semiconductor components. Its 16-bit timer and counter architecture supports precise measurement and control, while its 32 MHz operation provides useful performance headroom for industrial, communications, and consumer applications. The device includes 64 KB of ISP flash with read-while-write capability, including a dedicated 4 KB boot-code section. Its 2 KB EEPROM supports nonvolatile parameter storage, and its 4 KB SRAM provides working memory for control routines, buffering, and protocol handling. Fifty general-purpose I/O lines allow connection to sensors, displays, communication transceivers, and actuators without relying entirely on external peripheral devices. The peripheral set includes a four-channel event system, a programmable multilevel interrupt controller, a 16-bit real-time counter, and five flexible 16-bit timer/counters with compare and PWM modes. These resources enable deterministic event routing, accurate timing, motor-control functions, and multi-channel waveform generation. The event system is especially useful for synchronizing hardware actions independently of main-loop software scheduling. Typical applications include industrial controllers, data acquisition equipment, communications modules, motor-control systems, building automation, and low-power embedded products. The combination of XMEGA timing peripherals and 50 GPIO lines makes the microcontroller appropriate for systems that need deterministic peripheral behavior while retaining a modest, cost-conscious 8/16-bit architecture. Designers should pay close attention to supply voltage, clock configuration, programming interfaces, and decoupling when laying out a PCB. The manufacturer datasheet provides the authoritative pin descriptions, electrical limits, startup requirements, and programming connections for each 64-pin TQFP signal. Allow the configured operating voltage and required external components to remain within their specified limits across temperature and supply conditions. This page consolidates the device architecture, verified manufacturer characteristics, drop-in replacement assessment, application guidance, and practical PCB considerations into one engineering reference. It also distinguishes true pin-compatible substitutions from family members whose memory size, package code, qualification level, or peripheral configuration makes them unsuitable as direct replacements.

Permintaan RFG Kontak
ATXMEGA64D3-AU - 32MHz AVR XMEGA Microcontroller | Microchip
ATXMEGA64D3-AU

ATXMEGA64D3-AU - 32MHz AVR XMEGA Microcontroller | Microchip

The Microchip Technology ATXMEGA64D3-AU is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller with a 32 MHz clock, 64 KB of ISP Flash memory, 2 KB of EEPROM, and 4 KB of SRAM in a 64-pin TQFP package. It combines a 16-bit real-time counter, flexible 16-bit timer/counters, serial interfaces, and event-system resources for embedded control applications. What is an 8/16-bit AVR XMEGA microcontroller? XMEGA is an enhanced RISC microcontroller family that combines AVR processing with extensive timing and event-management peripherals. The ATXMEGA64D3 belongs to the microcontroller hierarchy of embedded processors, 8/16-bit MCUs, and 32-bit-capable embedded controllers. Its 16-bit timer architecture and programmable event system make it useful when deterministic sampling, waveform generation, and communication must share precise timing relationships. The device provides 64 KB of in-system-programmable Flash with read-while-write capability, including a 4 KB boot-code section. It also includes 2 KB of internal EEPROM and 4 KB of SRAM. According to the Microchip ATxmega64D3 product page, the family includes 50 general-purpose I/O lines, a four-channel event system, a programmable multilevel interrupt controller, five flexible 16-bit timer/counters with compare and PWM modes, three USARTs, and two two-wire serial interfaces. Operating at up to 32 MHz, the XMEGA D3 architecture supports computationally intensive embedded tasks while retaining the deterministic peripheral resources expected in industrial and communications equipment. Its boot section can protect application code from accidental modification, while read-while-write Flash allows nonvolatile code and data updates in suitable applications. The on-chip event system provides hardware routing between timer, comparator, and communication resources, reducing reliance on interrupt-only coordination. Typical uses include industrial data acquisition, motor and power conversion control, communications equipment, low-power sensor nodes, and compact embedded control platforms. Three USARTs support multiple serial links, while the two TWI interfaces can connect sensors and EEPROM devices over a shared two-wire bus. The five 16-bit timers provide dedicated timing for counters, frequency generation, motor control, and PWM outputs. Designers should allocate the 64 KB Flash and 4 KB SRAM carefully, provide regulated 2.7 V to 3.6 V power, and validate every peripheral connection against the manufacturer pin-description table. Boot programming and clock configuration should follow the device data sheet, while decoupling and signal-integrity practices remain necessary even at 32 MHz. This page combines the ATXMEGA64D3-AU specifications, application guidance, package details, and drop-in alternative considerations into a practical engineering reference. It also distinguishes verified device attributes from parameters that still require confirmation before schematic release, PCB layout, firmware migration, or production sourcing.

Permintaan RFG Kontak
ATXMEGA64D3-MH - 64KB Flash 32MHz AVR XMEGA D3 MCU | Microchip
ATXMEGA64D3-MH

ATXMEGA64D3-MH - 64KB Flash 32MHz AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA64D3-MH is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller with 64 KB of in-system programmable Flash, 2 KB EEPROM, 4 KB SRAM, and a 32 MHz CPU clock, housed in a 64-pin QFN (9x9 mm) package with exposed pad. The device operates from 1.6 V to 3.6 V and integrates a four-channel event system, programmable multi-level interrupt controller, and a rich peripheral set aimed at embedded control designs. An 8/16-bit AVR XMEGA microcontroller is a member of the reduced instruction-set computing (RISC) family of microcontrollers that executes most instructions in a single clock cycle. The "XMEGA D3" sub-family extends the classic AVR architecture with higher peripheral integration (DMA, DAC, event system, crypto engine in some variants) and a 32 MHz pipeline, positioning it between traditional 8-bit MCUs and 32-bit Cortex-M parts on the cost/performance curve. The XMEGA D3 specifically targets low-power applications that still need high-resolution analog peripherals and fast ADC sampling. Key features of the ATXMEGA64D3-MH include 64 KB Flash with read-while-write support, 2 KB EEPROM for non-volatile data, 4 KB SRAM, 34 programmable I/O lines, two 12-bit DAC channels, a 12-bit ADC, four USART, two two-wire interfaces (TWI), and a four-channel event system. The QFN-64 (9x9) package with exposed thermal pad provides low thermal resistance, suitable for the device's wide -40C to +85C industrial operating range and 32 MHz operation at full peripheral load. Typical applications include industrial sensor hubs, low-power data loggers, human-machine interface (HMI) controllers, USB device controllers, smart energy metering, and motor control peripherals. Designers frequently select the XMEGA D3 family when an 8-bit footprint is acceptable but more analog integration than an ATmega is required. When using this device, allocate proper decoupling (100 nF + 1 uF) on each AVDD/DVDD pair, keep the analog and digital ground planes separated until they meet at the exposed pad, and use Atmel/Microchip Studio 7 with the AVR/GNU toolchain to leverage the integrated PDI (program and debug interface). The MH suffix indicates QFN-64 (9x9 mm) industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives from the ATXMEGA family, and practical design notes not found in the standalone datasheet.

Permintaan RFG Kontak
ATXMEGA64D3-MHR - 32MHz 64KB Flash AVR XMEGA D3 MCU | Microchip
ATXMEGA64D3-MHR

ATXMEGA64D3-MHR - 32MHz 64KB Flash AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA64D3-MHR is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller combining 64 KB of in-system programmable Flash memory (with 4 KB boot code section and read-while-write capability), 2 KB of EEPROM, and 4 KB of SRAM, housed in a 64-pin VQFN (QFN) package measuring 9x9 mm with an exposed thermal pad. An 8/16-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die; the XMEGA family sits within Microchip's broader AVR microcontroller hierarchy, which extends from tiny 8-pin ATtiny devices up to multi-MB SAM ARM Cortex-M parts. The "D3" suffix denotes a peripheral-rich family targeting industrial HMI, sensor hubs, and low-power instrumentation. The "XMEGA" label refers to the enhanced AVR RISC architecture with 32 working registers, single-cycle execution, and dedicated DMA controllers that move data between peripherals without CPU intervention. Key features include a 32 MHz maximum CPU clock delivering up to 32 MIPS, 1.6 V to 3.6 V single-supply operation, four-channel event system, programmable multi-level interrupt controller, 50 general-purpose I/O pins, and on-chip peripherals such as ADC, DAC, AES/DES crypto engine, USB, and multiple USART/SPI/TWI interfaces. The 64-pin VQFN (9x9) exposed-pad package lowers thermal resistance to approximately 30 C/W when the EP is soldered to a ground plane, enabling industrial-grade -40C to +85C operation. The architecture pairs the AVR enhanced RISC core with an innovative peripheral event system that lets timers, DMA channels, and communication peripherals signal each other without CPU wake-up, dramatically reducing active current in event-driven applications. Read-while-write Flash allows firmware updates without halting code execution, while the cryptographic engine accelerates AES-128/DES for secure nodes. Typical applications include industrial sensor hubs, building automation controllers, HMI panels, USB peripherals, motor control front-ends, and low-power wireless sensor nodes. The wide 1.6 V to 3.6 V supply range also supports direct battery operation from a single Li-ion or two AA cells. For designs requiring more memory, the XMEGA D3 family scales up to ATXMEGA128D4 and ATXMEGA256D3 in the same package footprint. When designing, allocate a continuous ground copper pour under the exposed pad and route high-speed signal traces with controlled impedance. The XMEGA D3 supports Atmel Studio / Microchip Studio 5.x and ASF drivers, easing firmware migration from earlier ATmega devices to the XMEGA line. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - including a comparison of same-family D3 variants and cross-brand alternatives that share the same 64-pin VQFN footprint.

Permintaan RFG Kontak
ATXMEGA64D3-MN - 32MHz 64KB AVR MCU | Microchip Technology
ATXMEGA64D3-MN

ATXMEGA64D3-MN - 32MHz 64KB AVR MCU | Microchip Technology

The Microchip Technology ATXMEGA64D3-MN is an 8/16-bit AVR XMEGA D3-series microcontroller with a 32 MHz clock, 64 KB of ISP Flash memory, 2 KB of EEPROM, and 4 KB of SRAM in a 64-pin VFQFN package with an exposed pad. The device operates from 1.6 V to 3.6 V and is intended for compact embedded systems that require substantial flash storage, event-system peripherals, and low-power operation. An 8/16-bit microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The ATXMEGA family belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic component. It combines an AVR processing core with programmable peripherals that support event-driven control, timing, communications, analog measurement, and data acquisition without requiring separate logic devices for every function. The XMEGA D3 architecture includes 64 KB of ISP Flash with read-while-write capability and a 4 KB boot-code section. Its memory arrangement supports firmware update, bootloader operation, and moderate data-processing workloads. The device also provides 2 KB of EEPROM for persistent parameters, 4 KB of SRAM for working data, and a four-channel event system that can connect peripherals directly and reduce processor intervention during time-critical operations. The ATXMEGA64D3-MN supports operation from a 1.6 V to 3.6 V supply, allowing use in low-voltage industrial, consumer, communications, and embedded-control products. Its 32 MHz maximum clock rate provides useful performance for protocol handling, control loops, human-machine-interface scanning, and supervisory tasks while retaining the efficiency expected from an 8/16-bit architecture. Typical applications include industrial data-acquisition modules, compact control boards, sensor-hub controllers, communication equipment, and low-power embedded products. The 64 KB Flash capacity is suitable for moderate application firmware, while the event system and programmable multi-level interrupt logic help designers organize deterministic responses across internal peripherals. Design decisions should include careful review of pin multiplexing, supply decoupling, exposed-pad layout, and programming configuration before PCB release. Because the package contains 64 leads and an exposed thermal pad, the land pattern and soldering process must match the manufacturer package drawing. Use the pin-description table in the manufacturer datasheet when assigning traces and programming the I/O multiplexing registers. This page combines manufacturer and distributor product information with application guidance, design notes, comparison fields, and verified drop-in replacement screening. The alternatives list intentionally excludes unverified package variants so that engineers can distinguish an electrically similar device from a genuinely pin-compatible replacement.

Permintaan RFG Kontak
ATXMEGA64D4-AN - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64D4-AN

ATXMEGA64D4-AN - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64D4-AN is an 8/16-bit AVR XMEGA D4 microcontroller operating at up to 32 MHz, with 64 KB of programmable Flash memory, 2 KB of EEPROM, and 4 KB of SRAM in a 44-pin TQFP package measuring 10 x 10 mm. Its supply-voltage range is 1.6 V to 3.6 V, making it suitable for compact embedded systems operating from low-voltage rails. The device combines an enhanced AVR RISC core with a four-channel event system and a programmable multilevel interrupt controller for deterministic event handling. An 8/16-bit microcontroller is a programmable semiconductor that executes firmware, reads sensors, controls actuators, and manages communications within an embedded product. The ATXMEGA64D4 belongs to the AVR XMEGA family, a low-power, high-performance architecture with integrated flash, EEPROM, SRAM, timers, serial interfaces, and general-purpose I/O. This combination reduces the number of supporting components needed for control-oriented embedded designs. Key features include read-while-write in-system-programmable Flash, a 4 KB boot-code section, 2 KB of EEPROM, 4 KB of SRAM, 34 general-purpose I/O lines, and four flexible 16-bit timer/counter modules with compare and PWM channels. The device also provides two USARTs, two two-wire serial interfaces, a four-channel event system, and a 16-bit real-time counter. These resources support simultaneous control, communications, timing, and data-retention requirements. The ATXMEGA64D4 architecture is intended for low-power, real-time embedded control while retaining substantial peripheral integration. Read-while-write Flash allows nonvolatile program storage to operate concurrently with suitable code execution, while separate SRAM and EEPROM support working data and persistent parameter retention. The programmable interrupt controller and event system help connect asynchronous peripheral events without requiring every event to be handled through a main polling loop. Typical uses include industrial sensor controllers, compact data-acquisition modules, motor and actuator control, communication bridges, and low-power embedded instruments. Its two USARTs can support host or peer serial links, while its two TWI interfaces support external EEPROM, sensor, and other TWI-compatible peripherals. The 34 I/O lines make it useful when a system needs more parallel control than a small 8- or 16-pin MCU can provide. A primary design consideration is the combination of Flash capacity and SRAM partitioning. Firmware, boot code, stack usage, and application data must be planned together, and the manufacturer datasheet should define the programming and bootloader workflow before the PCB is finalized. Decoupling, clock configuration, programming access, and unused-pin handling must also follow the device-specific recommended layout. This product page consolidates the verified device specifications, package details, sourcing information, and engineering guidance needed to evaluate the ATXMEGA64D4-AN. It also provides practical application and PCB guidance for engineers determining whether the AVR XMEGA D4 feature set fits a new embedded design.

Permintaan RFG Kontak
ATXMEGA64D4-AU - 32MHz 64KB AVR MCU | Microchip
ATXMEGA64D4-AU

ATXMEGA64D4-AU - 32MHz 64KB AVR MCU | Microchip

The Microchip Technology ATXMEGA64D4-AU is a high-performance 8/16-bit AVR XMEGA D4 microcontroller with 32 MHz operation, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and 34 general-purpose I/O lines. It is housed in a 44-pin TQFP package measuring 10 mm by 10 mm. The device targets embedded systems requiring broad serial connectivity, timing, analog, and event-driven control without the memory footprint of a larger 32-bit MCU. An 8/16-bit microcontroller is a compact embedded controller that executes instructions from internal program and data memory while integrating peripherals for communication, timing, interrupts, and signal control. In the broader device hierarchy, the ATXMEGA64D4-AU belongs to the AVR family, the XMEGA D4 subfamily, and ultimately the semiconductor and embedded-control categories. Its enhanced RISC architecture supports predictable instruction throughput suitable for motor, communications, instrumentation, and industrial control designs. Verified device features include read-while-write in-system-programmable flash, a 4 KB boot-code section, a four-channel event system, a programmable multilevel interrupt controller, four flexible 16-bit timer/counter blocks, a 16-bit real-time counter, two USARTs, two two-wire serial interfaces, and additional connectivity documented in the AVR XMEGA D4 datasheet. This peripheral mix supports simultaneous sensor acquisition, actuator timing, serial links, and event-based signal routing. The ATXMEGA64D4-AU combines 64 KB of flash with only 4 KB of SRAM, making flash utilization and interrupt timing important design considerations. Firmware should use the documented memory regions carefully, avoid unnecessary blocking routines, and reserve SRAM for stacks, buffers, and time-critical data. In-system programming and read-while-write operation can simplify firmware updates, although application code must observe the device's program-memory execution restrictions. Typical applications include industrial control panels, sensor hubs, motor-control peripherals, data-acquisition modules, building-control nodes, low-power serial gateways, and compact embedded instruments. The 34 I/O lines allow connection of sensors, displays, communications transceivers, and actuators while retaining dedicated peripheral functions. Compared with simpler 8-bit MCUs, the XMEGA D4 architecture offers higher clock speed and a broader peripheral set; compared with higher-end 32-bit MCUs, it offers a simpler control-oriented architecture and lower memory capacity. Designers should verify every package pin, alternate-function mapping, voltage domain, and peripheral limit against the manufacturer datasheet before layout release. The -AU ordering information identifies the 44-pin TQFP device, but package suffixes, temperature grades, clock options, and programmed variants must be checked during procurement. A hardware design should preserve the recommended decoupling, programming-interface access, clock stability, and exposed-ground layout practices specified by Microchip. This page consolidates the verified manufacturer and distributor information for ATXMEGA64D4-AU with engineering-focused selection guidance. It distinguishes documented capabilities from unavailable details, emphasizes the 32 MHz and 64 KB memory limits, and avoids treating functionally similar MCUs as verified drop-in replacements. For sourcing, use the linked distributor records to confirm current inventory, price, delivery, and exact suffix handling.

Permintaan RFG Kontak
ATXMEGA64D4-AUR - 32MHz 64KB AVR MCU | Microchip (Tape & Reel)
ATXMEGA64D4-AUR

ATXMEGA64D4-AUR - 32MHz 64KB AVR MCU | Microchip (Tape & Reel)

The Microchip Technology ATXMEGA64D4-AUR is a high-performance 8/16-bit AVR XMEGA D4 microcontroller with 32 MHz operation, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and 34 general-purpose I/O lines. It is housed in a 44-pin TQFP package measuring 10 mm by 10 mm. The device targets embedded systems requiring broad serial connectivity, timing, analog, and event-driven control without the memory footprint of a larger 32-bit MCU. An 8/16-bit microcontroller is a compact embedded controller that executes instructions from internal program and data memory while integrating peripherals for communication, timing, interrupts, and signal control. In the broader device hierarchy, the ATXMEGA64D4-AUR belongs to the AVR family, the XMEGA D4 subfamily, and ultimately the semiconductor and embedded-control categories. Its enhanced RISC architecture supports predictable instruction throughput suitable for motor, communications, instrumentation, and industrial control designs. Verified device features include read-while-write in-system-programmable flash, a 4 KB boot-code section, a four-channel event system, a programmable multilevel interrupt controller, four flexible 16-bit timer/counter blocks, a 16-bit real-time counter, two USARTs, two two-wire serial interfaces, and additional connectivity documented in the AVR XMEGA D4 datasheet. This peripheral mix supports simultaneous sensor acquisition, actuator timing, serial links, and event-based signal routing. The ATXMEGA64D4-AUR combines 64 KB of flash with only 4 KB of SRAM, making flash utilization and interrupt timing important design considerations. Firmware should use the documented memory regions carefully, avoid unnecessary blocking routines, and reserve SRAM for stacks, buffers, and time-critical data. In-system programming and read-while-write operation can simplify firmware updates, although application code must observe the device's program-memory execution restrictions. Typical applications include industrial control panels, sensor hubs, motor-control peripherals, data-acquisition modules, building-control nodes, low-power serial gateways, and compact embedded instruments. The 34 I/O lines allow connection of sensors, displays, communications transceivers, and actuators while retaining dedicated peripheral functions. Compared with simpler 8-bit MCUs, the XMEGA D4 architecture offers higher clock speed and a broader peripheral set; compared with higher-end 32-bit MCUs, it offers a simpler control-oriented architecture and lower memory capacity. Designers should verify every package pin, alternate-function mapping, voltage domain, and peripheral limit against the manufacturer datasheet before layout release. The -AU ordering information identifies the 44-pin TQFP device, but package suffixes, temperature grades, clock options, and programmed variants must be checked during procurement. A hardware design should preserve the recommended decoupling, programming-interface access, clock stability, and exposed-ground layout practices specified by Microchip. This page consolidates the verified manufacturer and distributor information for ATXMEGA64D4-AUR with engineering-focused selection guidance. It distinguishes documented capabilities from unavailable details, emphasizes the 32 MHz and 64 KB memory limits, and avoids treating functionally similar MCUs as verified drop-in replacements. For sourcing, use the linked distributor records to confirm current inventory, price, delivery, and exact suffix handling.

Permintaan RFG Kontak
ATXMEGA64D4-CU - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64D4-CU

ATXMEGA64D4-CU - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64D4-CU is a low-power 8/16-bit AVR XMEGA D4 microcontroller with a 32 MHz clock, 64 KB ISP Flash memory, 2 KB EEPROM, 4 KB SRAM, and a 49-VFBGA 5x5 mm package. The device provides a 1.6 V to 3.6 V operating range and combines four-channel event-system support with a programmable multi-level interrupt controller. Its 64 KB flash organization is specified as 32K x 16, with a dedicated 4 KB boot-code section and read-while-write capability. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one package. The ATXMEGA64D4 belongs to the AVR XMEGA product family and extends the AVR enhanced RISC architecture into a higher-performance, peripheral-rich platform. Its hierarchy is microcontroller → 8/16-bit microcontroller → AVR XMEGA microcontroller → XMEGA D4 device, placing it between general-purpose 8-bit control and more demanding 16-bit embedded processing. Verified device features include 64 KB of ISP Flash in a 32K x 16 organization, a separate 4 KB boot-code section, 2 KB EEPROM, and 4 KB SRAM. Read-while-write operation allows supported code regions to execute while another Flash area is updated. The four-channel event system can coordinate timing-sensitive internal operations without relying entirely on software polling, while the programmable multi-level interrupt controller helps prioritize real-time events. The compact 49-VFBGA package reduces board area compared with larger leaded or QFN packages. The ATXMEGA64D4 uses the AVR enhanced RISC core and supports operation from a 1.6 V to 3.6 V supply, making it appropriate for embedded systems that require more memory and event-driven control than typical entry-level 8-bit MCUs. Distributor listings identify I2C, IrDA, SPI, and UART/USART connectivity for the compared D4-class device, while the manufacturer describes a high-performance, low-power platform with integrated event handling and interrupt resources. Typical uses include compact industrial control modules, low-power sensor nodes, building and automation controllers, communication equipment, motor-control peripherals, and compact consumer products. The 32 MHz operating speed provides useful headroom for protocol processing and coordinated peripheral activity, while 64 KB Flash supports a bootloader and a larger application than many basic 8-bit controllers. Designers still need to confirm speed, analog, and peripheral limits against the full Microchip datasheet for each operating voltage. The main design consideration is the 49-VFBGA land pattern. Its fine pitch and exposed thermal pad require careful PCB design, stencil selection, reflow-profile control, and assembly inspection. Because the verified package drawing and complete 49-pin electrical map were not included in the supplied sources, engineers should download the official ATxmega64D4 documentation before defining the footprint, programming connector, and decoupling network. This page consolidates verified manufacturer and distributor information, distinguishes same-package candidates from non-drop-in comparisons, and adds application guidance and PCB cautions that are not available from a basic distributor listing alone.

Permintaan RFG Kontak
ATXMEGA64D4-CUR - 32MHz 64KB AVR Microcontroller | Microchip (Tape & Reel)
ATXMEGA64D4-CUR

ATXMEGA64D4-CUR - 32MHz 64KB AVR Microcontroller | Microchip (Tape & Reel)

The Microchip Technology ATXMEGA64D4-CUR is a low-power 8/16-bit AVR XMEGA D4 microcontroller with a 32 MHz clock, 64 KB ISP Flash memory, 2 KB EEPROM, 4 KB SRAM, and a 49-VFBGA 5x5 mm package. The device provides a 1.6 V to 3.6 V operating range and combines four-channel event-system support with a programmable multi-level interrupt controller. Its 64 KB flash organization is specified as 32K x 16, with a dedicated 4 KB boot-code section and read-while-write capability. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one package. The ATXMEGA64D4 belongs to the AVR XMEGA product family and extends the AVR enhanced RISC architecture into a higher-performance, peripheral-rich platform. Its hierarchy is microcontroller → 8/16-bit microcontroller → AVR XMEGA microcontroller → XMEGA D4 device, placing it between general-purpose 8-bit control and more demanding 16-bit embedded processing. Verified device features include 64 KB of ISP Flash in a 32K x 16 organization, a separate 4 KB boot-code section, 2 KB EEPROM, and 4 KB SRAM. Read-while-write operation allows supported code regions to execute while another Flash area is updated. The four-channel event system can coordinate timing-sensitive internal operations without relying entirely on software polling, while the programmable multi-level interrupt controller helps prioritize real-time events. The compact 49-VFBGA package reduces board area compared with larger leaded or QFN packages. The ATXMEGA64D4 uses the AVR enhanced RISC core and supports operation from a 1.6 V to 3.6 V supply, making it appropriate for embedded systems that require more memory and event-driven control than typical entry-level 8-bit MCUs. Distributor listings identify I2C, IrDA, SPI, and UART/USART connectivity for the compared D4-class device, while the manufacturer describes a high-performance, low-power platform with integrated event handling and interrupt resources. Typical uses include compact industrial control modules, low-power sensor nodes, building and automation controllers, communication equipment, motor-control peripherals, and compact consumer products. The 32 MHz operating speed provides useful headroom for protocol processing and coordinated peripheral activity, while 64 KB Flash supports a bootloader and a larger application than many basic 8-bit controllers. Designers still need to confirm speed, analog, and peripheral limits against the full Microchip datasheet for each operating voltage. The main design consideration is the 49-VFBGA land pattern. Its fine pitch and exposed thermal pad require careful PCB design, stencil selection, reflow-profile control, and assembly inspection. Because the verified package drawing and complete 49-pin electrical map were not included in the supplied sources, engineers should download the official ATxmega64D4 documentation before defining the footprint, programming connector, and decoupling network. This page consolidates verified manufacturer and distributor information, distinguishes same-package candidates from non-drop-in comparisons, and adds application guidance and PCB cautions that are not available from a basic distributor listing alone.

Permintaan RFG Kontak