Produk (21.000+)

CY8C3665AXI-198 - 67MHz 32KB PSoC 3 MCU | Infineon
CY8C3665AXI-198

CY8C3665AXI-198 - 67MHz 32KB PSoC 3 MCU | Infineon

The Infineon Technologies CY8C3665AXI-198 is a PSoC 3 CY8C36xx 8-bit microcontroller operating at 67 MHz, with 32 kByte of flash memory, 16 universal digital blocks, 62 I/O pins, and 4 kByte of SRAM in a 100-pin TQFP package measuring 14 x 14 mm. Its combination of an 8051-compatible core, programmable digital resources, and a substantial pin count supports compact control designs that need more peripheral routing than a small general-purpose MCU provides. A PSoC 3, or Programmable System-on-Chip, integrates a microcontroller core with configurable digital and analog resources on one mixed-signal device. This MCU belongs to the CY8C36xx family, where designers can use universal digital blocks to implement timers, counters, serial interfaces, and custom logic alongside the 8051 processor. That integration can reduce the need for separate peripheral ICs when the required functions are appropriately partitioned and the design is verified against the family architecture. The most prominent device characteristics are its 67 MHz operating frequency, 32 kByte program flash, 4 kByte SRAM, 16 universal digital blocks, and 62 available I/O pins. The 100-lead TQFP footprint provides extensive routing access for external sensors, displays, communication transceivers, actuators, and mixed-signal conditioning networks. Unlike a small-pin-count MCU, the large perimeter package also makes it practical to distribute signals around a multi-layer board. The CY8C36xx architecture supports an embedded 8051 instruction set alongside programmable system resources. The universal digital blocks can be arranged into configurations such as timers, counters, serial channels, and custom functions, allowing firmware to map peripheral behavior to application requirements. Designers should consult the manufacturer datasheet for the exact block counts, trigger routing, clock limits, and electrical operating ranges of the selected configuration. Typical uses include industrial control panels, sensor-conditioning equipment, motor and actuator controllers, user-interface modules, communications equipment, and compact consumer products. The 62 I/O pins are especially useful when a design connects several sensors, indicator drivers, relay outputs, or serial interfaces. For designs needing higher analog precision or more analog peripherals, a different PSoC family member may be a better architectural fit. When laying out the board, provide short, direct return paths for supply and ground pins and route sensitive analog signals away from digital switching nodes. Confirm package dimensions, pin functions, exposed-pad requirements, and recommended PCB land patterns in the manufacturer package drawings before releasing artwork. This page combines the manufacturer product overview with practical selection guidance, a parameter comparison against related PSoC 3 devices, and design notes covering decoupling, clocking, signal integrity, and firmware planning. These engineering resources support an early architecture decision while the complete datasheet remains the controlling document for implementation.

Permintaan RFG Kontak
CY8C3665LTI-199 - 67MHz PSoC 3 MCU with 32KB Flash | Infineon
CY8C3665LTI-199

CY8C3665LTI-199 - 67MHz PSoC 3 MCU with 32KB Flash | Infineon

The Infineon CY8C3665LTI-199 is a PSoC 3 programmable system-on-chip microcontroller with an 8051 CPU, 67 MHz maximum operating frequency, 32 KB flash memory, and a 12-bit ADC in a 68-QFN surface-mount package. The CY8C36xx family combines a microcontroller core with programmable analog and digital resources, allowing compact designs to integrate sensing, control, and communications functions without relying on several discrete components. A PSoC, or programmable system-on-chip, is an MCU-family device that places a processor, programmable peripheral blocks, analog conversion functions, and digital logic on one integrated circuit. Within the product hierarchy, a PSoC is a microcontroller and embedded control device, while its configurable analog and digital blocks extend beyond the functions of a basic fixed-function MCU. This integration can reduce board area and development effort when firmware can configure the required peripheral combination. The CY8C3665LTI-199 operates at up to 67 MHz and includes 32 KB of flash plus 4 KB of SRAM according to the distributor product data. Its 12-bit ADC supports applications that require measurements beyond the resolution of an 8-bit microcontroller input. A 1.71 V to 5.5 V flexible supply range provides compatibility with embedded supply rails, while the industrial temperature range of -40°C to +85°C supports operation across industrial, consumer, and automotive-adjacent environments. The device belongs to the CY8C36xx PSoC 3 family and uses the Infineon or Cypress PSoC Creator-compatible design ecosystem. Its architecture is suited to mixed-signal products in which analog sensing, digital control, timers, communication, and programmable logic must share a compact microcontroller platform. The supplied manufacturer information confirms the 8051 core, 32 KB flash, and 12-bit ADC; detailed peripheral assignments and register behavior must be checked against the manufacturer datasheet for the selected clock, routing, and converter configuration. Typical uses include industrial control panels, capacitive sensing interfaces, compact consumer controls, temperature and environmental measurement systems, and communication-enabled embedded products. The 12-bit ADC is particularly useful for monitoring analog sensors, while the 67 MHz processing rate provides additional headroom for protocols, control logic, and system management tasks. Designers should verify the complete 68-QFN pin assignment, exposed-pad connection, decoupling requirements, clock options, and power-sequencing limits in the manufacturer documentation before layout. Because this is a configurable mixed-signal MCU, unused analog and digital blocks should be configured deliberately, and analog routing and sensitive measurement circuits should be placed away from high-current switching paths. This product record combines verified manufacturer and distributor specifications, availability links, procurement guidance, and design-focused selection criteria. It also distinguishes confirmed technical facts from details that require validation in the full datasheet, helping engineers evaluate the CY8C3665LTI-199 without mistaking a related-family device for a verified drop-in replacement.

Permintaan RFG Kontak
CY8C3665PVI-008 - 67MHz 8051 PSoC 3 MCU | Infineon
CY8C3665PVI-008

CY8C3665PVI-008 - 67MHz 8051 PSoC 3 MCU | Infineon

Infineon Technologies CY8C3665PVI-008 is an 8-bit PSoC 3 programmable system-on-chip with a 67 MHz 8051 MCU core, 32 KB of Flash memory, and a 12-bit ADC in a 48-pin SSOP package. The device combines a microcontroller with programmable analog and digital peripheral resources in a single mixed-signal IC. A PSoC 3 is a programmable system-on-chip in the embedded microcontroller hierarchy. It integrates an 8051-compatible CPU core with configurable analog and digital blocks rather than relying exclusively on fixed peripherals. This system-level integration can reduce external component count in applications requiring mixed-signal sensing, control, communication, or low-power operation. The CY8C3665PVI-008 provides 32 KB of Flash organized as 32K x 8 bits, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC Flash according to the manufacturer and Keil device information. Its 12-bit ADC supports analog measurement tasks, while the dual datapointers and interrupt architecture help manage time-critical data movement and event handling. Technical information identifies the device as an 8-bit, single-core 8051 microcontroller operating up to 67 MHz. The manufacturer product page lists the part as a CY8C36-series PSoC 3 with 32 KB Flash and a 12-bit ADC. Mouser additionally identifies a 0.5 V to 5.5 V operating range, while distributor listings identify the 48-pin SSOP package and 3.3 V operating class. Typical uses include industrial sensing and control, low-power monitoring, embedded instrumentation, general-purpose control panels, and compact consumer products. The 67 MHz CPU speed supports faster control-loop execution, the 12-bit ADC supports analog input conditioning, and the programmable PSoC architecture allows peripheral functions to be adapted to a particular board design rather than fixed entirely at manufacture. When designing around this device, verify the exact pin arrangement, exposed-pad requirements, operating-temperature grade, and clock implementation against the current manufacturer documentation. Supply decoupling and grounding remain important because analog measurements can be affected by noise coupling from digital and switching circuitry on a mixed-signal PCB. This product record combines current distributor availability information, verified device parameters, manufacturer sourcing, and practical application guidance. It also distinguishes documented characteristics from unavailable details and clearly identifies the limited number of confirmed same-footprint drop-in alternatives.

Permintaan RFG Kontak
CY8C3665PVI-080 - 67MHz 8-Bit PSoC 3 MCU | Infineon
CY8C3665PVI-080

CY8C3665PVI-080 - 67MHz 8-Bit PSoC 3 MCU | Infineon

Infineon Technologies CY8C3665PVI-080 is an 8-bit PSoC 3 programmable system-on-chip microcontroller operating at 67 MHz, with 32 KB of Flash memory and a 48-pin SSOP package. The device supports an operating-voltage range of 0.5 V to 5.5 V and combines an 8051-compatible processor core with programmable analog and digital system resources for compact embedded designs. A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates a CPU, programmable digital blocks, analog blocks, and memory into one device. This hierarchy places the PSoC 3 platform between a conventional 8-bit microcontroller and a more complex mixed-signal system-on-chip, allowing functions such as analog conversion, control, and digital logic to be implemented in a compact embedded package. The CY8C3665 provides 32 KB of Flash program memory, an 8-bit processing core, and a maximum stated operating frequency of 67 MHz. Its 0.5 V to 5.5 V operating range supports low-voltage and conventional embedded supply environments. The 48-pin SSOP package also provides enough external connections for mixed-signal peripheral routing, programming, clocking, and communication interfaces. PSoC 3 devices combine a deterministic 8051-compatible computing core with configurable digital and analog resources. That architecture can reduce the need for separate external components when a design requires control logic together with signal conditioning, conversion, timers, or other programmable functions. The exact peripheral configuration depends on the device resources and the firmware programmed into the microcontroller. Typical uses include industrial control modules, compact sensor interfaces, consumer peripherals, power-management controllers, and embedded instrumentation. The device is particularly suitable when moderate processing speed, Flash-based firmware storage, and a broad supply-voltage range are required within a moderate pin-count surface-mount package. PCB design should preserve the pin assignments and decoupling guidance shown in the manufacturer datasheet, and programming should follow the PSoC Creator or supported toolchain workflow for this family. Confirm the exact pin names, package drawing, peripheral availability, and electrical limits before releasing a production schematic. This product overview combines device specifications, application guidance, verified drop-in alternatives, and design-focused comparisons to help engineers evaluate the CY8C3665PVI-080 for embedded mixed-signal designs without relying on raw catalog information alone.

Permintaan RFG Kontak
CY8C3666AXI-036 - 67MHz PSoC 3 MCU with 64KB Flash | Infineon
CY8C3666AXI-036

CY8C3666AXI-036 - 67MHz PSoC 3 MCU with 64KB Flash | Infineon

Infineon Technologies CY8C3666AXI-036 is a PSoC 3 programmable system-on-chip microcontroller with an 8-bit 8051 CPU, 67 MHz operating frequency, 64 kByte flash memory, and 8 kByte SRAM in a 100-lead TQFP package. The device is designed for embedded systems that benefit from configurable digital and analog peripheral blocks rather than a fixed collection of dedicated peripherals. A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that combines a CPU, programmable digital blocks, programmable analog blocks, memory, and configurable I/O in one integrated device. In the broader semiconductor hierarchy, the CY8C3666 belongs to the PSoC family, which is part of the 8-bit microcontroller and embedded-processing market. Its configurable architecture allows functions to be adapted at design time while reducing the need for separate discrete peripheral devices. The manufacturer lists 64 kByte of flash for firmware storage and 8 kByte of SRAM for working data. Its operating frequency reaches 67 MHz, providing additional execution headroom for interrupt handling, serial communications, control logic, and mixed-signal functions. A distributor description identifies USB and serial connectivity, timer and PWM control, and configurable analog and digital resources as important features of the CY8C3666 family. The 100-lead TQFP package exposes the device's extensive mixed-signal and digital resources in a surface-mount format measuring 14 mm by 14 mm. A 100-pin footprint also provides substantial routing flexibility, although it requires careful PCB layout and a larger board area than compact 16-pin or 32-pin microcontrollers. Design engineers should assign pins according to the manufacturer pin-description table rather than inferring functions from the package position alone. Typical uses include USB-connected embedded controls, serial-interface data acquisition equipment, timer-based motor and pump controls, PWM-driven actuator systems, and mixed-signal products requiring programmable analog and digital functions. The same PSoC 3 architecture can consolidate a small control system onto one device when the design benefits from configurable peripherals and deterministic embedded control. When planning a PCB, reserve all 100 package positions even if the initial product uses only a subset of the device functions. Follow the manufacturer reference schematic and pin-description table for decoupling, analog routing, and unused-pin treatment. Firmware selection must also match the exact CY8C3666 device configuration, flash size, SRAM size, package, and ordering code. This product record combines the exact manufacturer and distributor parameters for the CY8C3666AXI-036 with engineering guidance on package implementation, application fit, verified drop-in replacement constraints, and design decision trade-offs. It emphasizes using the exact device characterization and manufacturer pin definitions during schematic capture, PCB layout, firmware configuration, and production sourcing.

Permintaan RFG Kontak
CY8C3666AXI-200 - 67MHz 64KB PSoC MCU | Infineon
CY8C3666AXI-200

CY8C3666AXI-200 - 67MHz 64KB PSoC MCU | Infineon

Infineon Technologies CY8C3666AXI-200 is an 8-bit PSoC programmable system-on-chip microcontroller with a 67 MHz 8051-compatible core, 64 KB of flash memory, 8 KB of SRAM, CAN and LIN networking, and timer/PWM control. The device is supplied in a 100-pin TQFP package and is identified as an in-production part. Its operating voltage options are 2.5 V, 3.3 V, and 5 V, providing flexibility for embedded industrial, automotive, and consumer-control designs. A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller architecture that combines a CPU, programmable digital and analog peripherals, memory, and configurable signal-processing resources on one integrated circuit. The CY8C3666 belongs to the PSoC 3 family and retains the familiar 8051 instruction architecture while adding dedicated networking and control blocks. In the hierarchy, it is a microcontroller, mixed-signal IC, and embedded processor rather than a general-purpose application processor. The verified device data identifies 64 KB of flash, 8 KB of SRAM, a maximum operating frequency of 67 MHz, dual datapointers, 27 interrupt sources with eight priority levels, and eight parallel access paths through its Peripheral Hub Unit. Additional memory resources include four flash protection levels, 2 KB of data EEPROM, and 8 KB of ECC flash. These resources support moderate protocol stacks, state-machine control, data logging, and connected embedded products without requiring external memory. CAN and LIN connectivity make the CY8C3666AXI-200 especially relevant to automotive and industrial networks. CAN supports higher-bandwidth, multi-node communication, while LIN addresses lower-cost, lower-bandwidth vehicle sub-networks. Dedicated timers and PWM resources support motor, lighting, actuator, and general timing functions. The combination allows designers to consolidate control, communication, and peripheral functions into a single 100-pin TQFP device. Typical uses include automotive body and gateway controllers, CAN-to-LIN network nodes, industrial sensor hubs, building-control equipment, motor-control subsystems, and compact consumer-control boards. Designers should verify every pin, peripheral mapping, clock configuration, transceiver interface, and electrical limit against the manufacturer datasheet before production release. Software and peripheral assignments should also be validated with the supported PSoC development environment. The principal design consideration is package allocation: the 100-pin TQFP exposes many I/O and peripheral resources, but every assigned function must comply with the published pin-mux and electrical characteristics. This page combines verified device specifications, sourced availability references, same-family substitution findings, package information, and practical engineering guidance to support design review and procurement.

Permintaan RFG Kontak
CY8C3666AXI-202 - 67MHz PSoC 3 MCU | Infineon | 100-TQFP
CY8C3666AXI-202

CY8C3666AXI-202 - 67MHz PSoC 3 MCU | Infineon | 100-TQFP

The Infineon Technologies CY8C3666AXI-202 is a PSoC 3 programmable system-on-chip based on an 8-bit 8051 CPU, operating up to 67 MHz and integrating 64 kByte of flash memory, 8 kByte of SRAM, and 62 GPIOs in a 100-TQFP package measuring 14 x 14 mm. A PSoC 3 is a mixed-signal microcontroller that combines a CPU, programmable digital blocks, analog resources, and specialized peripherals in one integrated circuit. The MCU belongs to the hierarchy 8051 microcontroller, embedded microcontroller, programmable system-on-chip, and integrated semiconductor. Unlike a general-purpose 8051 device, it provides configurable peripheral resources and a hardware hub for connecting blocks within the chip. The verified feature set includes a single-core 8051 processor rated up to 67 MHz, 64 kByte of flash organized as 64K x 8, 8 kByte of SRAM, and 2 kByte of data EEPROM. The device also provides 27 interrupt sources with eight priority levels, one Peripheral Hub Unit with eight parallel access paths, and two data pointers. These resources support interrupt-driven control, data acquisition, communications, and programmable signal-processing tasks. The 62 GPIOs make the CY8C3666AXI-202 suitable for devices requiring numerous external connections, including service robots and embedded control systems. Its 100-TQFP package provides substantially more I/O than smaller microcontroller packages while retaining a conventional leaded footprint that can be assembled using standard surface-mount production methods. Operating voltage information available from distributor results identifies a 5.50 V maximum device rating, but detailed electrical limits still require confirmation in the manufacturer datasheet. Typical embedded applications include service-robot control, industrial interface modules, sensor-heavy control boards, programmable input and output systems, and compact consumer equipment. Designers should preserve the peripheral routing and pin constraints of the PSoC 3 architecture, verify the unused pins and power requirements against the datasheet, and confirm that the selected development toolchain supports the CY8C36xx device family. This page consolidates the verified manufacturer and distributor details for the CY8C3666AXI-202 and separates documented specifications from unavailable pricing, pin-level data, and regulatory details. It also provides practical application and design guidance for evaluating the MCU before committing a PCB layout or production order.

Permintaan RFG Kontak
CY8C3846AXE-175 - 48MHz 8-bit PSoC 3 MCU | Infineon
CY8C3846AXE-175

CY8C3846AXE-175 - 48MHz 8-bit PSoC 3 MCU | Infineon

Infineon Technologies CY8C3846AXE-175 is an 8-bit PSoC 3 CY8C38xx programmable system-on-chip microcontroller operating at 48 MHz, with 64 KB of embedded flash memory, in a 100-pin TQFP package measuring 14 x 14 mm. The device accepts a 0.5 V to 5.5 V operating-voltage range and combines an 8051-compatible MCU with programmable mixed-signal and digital resources. A microcontroller is a semiconductor integrated circuit containing a processor core, nonvolatile program memory, data memory, and peripherals on one die. In the broader IC hierarchy, the CY8C3846AXE-175 belongs to the embedded-microcontroller category and provides a compact platform for combining control logic with analog functions. Its 8051 architecture and PSoC 3 family position it between simple fixed-function controllers and higher-performance 32-bit microcontrollers. The principal verified features include a 48 MHz operating frequency, 64 KB of flash organized as 64K x 8 bits, 8-bit processing, and a 100-TQFP gull-wing package. Distributor records also identify 2.5 V, 3.3 V, and 5 V operating options for this device family. Its 100 terminals provide a substantial number of external connections compared with smaller 8-, 16-, or 32-pin microcontroller packages, supporting integration into control and mixed-signal systems that require numerous I/O resources. The CY8C38xx architecture combines an 8051-compatible core with programmable analog blocks, digital blocks, and programmable system resources. This enables designers to consolidate functions that might otherwise require separate analog and digital ICs. The 64 KB flash capacity provides sufficient on-chip storage for embedded firmware, while the 48 MHz clock rate supports responsive control and measurement routines. However, it remains an 8-bit MCU rather than a 32-bit processor, so workloads requiring large data movement, complex operating systems, or high computational bandwidth may benefit from a more capable platform. Typical uses include industrial control panels, building automation modules, sensor interfaces, motor and power-control systems, consumer appliances, and compact embedded instruments. The high pin count can reduce external glue when a design needs numerous GPIO, communication, control, or analog connections. Firmware and board validation remain essential because peripheral availability, routing, and operating conditions depend on the selected PSoC configuration. Designers should use the manufacturer datasheet for the definitive pin map, electrical limits, programming requirements, and exposed-pad connection details. Layout planning should preserve the required decoupling structure, provide clean grounding for sensitive analog measurements, and route high-speed or switching signals away from precision analog inputs. Firmware should also include startup and brownout behavior appropriate to the selected supply range. This product record consolidates verified distributor specifications, current commercial information, and practical engineering guidance. It also distinguishes confirmed facts from unavailable details rather than inferring pin assignments, electrical limits, lifecycle guarantees, or cross-references that are not present in the supplied source data.

Permintaan RFG Kontak
CY8C3865AXA-018 - 8051 PSoC 67MHz 32KB TQFP-100 | Infineon Technologies
CY8C3865AXA-018

CY8C3865AXA-018 - 8051 PSoC 67MHz 32KB TQFP-100 | Infineon Technologies

The Infineon Technologies CY8C3865AXA-018 is an 8-bit PSoC 3 CY8C38xx programmable system-on-chip microcontroller with a 67 MHz operating frequency, 32 KB flash memory, and a 100-pin TQFP package. The device belongs to the PSoC family, which combines configurable analog and digital peripherals with embedded flash memory and a microcontroller in a single integrated circuit. Its operating supply range is listed as 0.5 V to 5.5 V. The CY8C3865AXA-018 is identified as an 8051-compatible 8-bit MCU architecture. Its programmable system-on-chip structure allows selected analog and digital functions to be configured in the device rather than relying on a fixed combination of peripheral functions. This makes the device suitable for embedded designs that need programmable control, signal conditioning, sensing, and communication functions in one package. The 100-pin TQFP package provides a large pin count for external connectivity and mixed-signal implementations. Key cataloged features include 32 KB of flash, a maximum stated clock frequency of 67 MHz, an 8051 instruction-set architecture, and a 0.5 V to 5.5 V supply range. The part is listed with an LFQFP package code by an aggregator, while the distributor listing describes the package as 100-TQFP in a 14 x 14 mm outline. These package descriptions identify the same general 100-pin gull-wing footprint. The PSoC architecture can be used for industrial control, sensor interfaces, consumer products, communications equipment, and embedded control systems. Its combination of configurable peripherals and flash-based program storage allows a compact design to integrate control logic with application-specific analog functions. Device selection should also account for the required peripheral configuration, memory capacity, clocking requirements, voltage range, and the availability of the exact package variant. When designing a board around the CY8C3865AXA-018, use the manufacturer datasheet pin description table to assign every power, ground, programming, clock, analog, and digital signal. The 100-pin package offers many peripheral connections, so accurate pin planning is essential to avoid conflicts between reusable functions. Do not infer a complete pinout from package dimensions or distributor descriptions. This page combines the manufacturer datasheet reference, distributor catalog information, and the available cross-reference candidates for the CY8C3865AXA-018. It also identifies which replacement candidates require additional verification. The exact lifecycle status, detailed electrical limits, programming model, and manufacturer-approved drop-in alternatives should be confirmed before production release.

Permintaan RFG Kontak
CY8C3865AXI-204 - 67MHz 8051 MCU, 32KB Flash | Infineon
CY8C3865AXI-204

CY8C3865AXI-204 - 67MHz 8051 MCU, 32KB Flash | Infineon

Infineon Technologies CY8C3865AXI-204 is an 8-bit PSoC 3 CY8C38xx microcontroller built around a single-core 8051 architecture. It operates up to 67 MHz, provides 32 KB of flash program memory, 8 KB of SRAM and 1 KB of data EEPROM, and is housed in a 100-lead TQFP package measuring 14 mm by 14 mm. The device also includes one Fast USB 2.0 interface, 16 Universal Digital Blocks, a Peripheral Hub Unit, dual data pointers, 27 interrupt sources and eight priority levels. An 8051 microcontroller is an embedded-processing component that combines a general-purpose CPU core, program memory, data memory, peripherals and interrupt handling on one integrated circuit. The CY8C38xx family belongs to the PSoC architecture, placing programmable digital blocks and a peripheral hub beside the 8051 core. This hierarchy—8-bit MCU, 8051 microcontroller, PSoC 3 microcontroller, embedded processor and semiconductor—makes the part suitable for designs requiring flexible digital peripherals and USB connectivity. The principal features combine a 67 MHz operating ceiling with 32 KB of flash, 8 KB of SRAM and 1 KB of EEPROM. Sixteen Universal Digital Blocks support configurable digital functions, while the Peripheral Hub Unit provides eight parallel access paths, or spokes, for peripheral traffic. The integrated Fast USB 2.0 interface is particularly useful for USB-connected control, data-acquisition and human-interface equipment. Four flash protection levels add configurable firmware-control options. The interrupt architecture supports 27 sources and eight priority levels, allowing time-sensitive USB, timer, serial, and programmable digital events to be handled deterministically. Dual data pointers improve access to separate data regions, and the 8051 instruction-set architecture supports a mature embedded-software ecosystem. The part's combination of CPU performance, programmable logic resources and USB reduces the need for separate programmable-logic devices in suitable designs. Typical applications include USB data-acquisition equipment, industrial control panels, programmable serial interfaces, USB-connected test systems, embedded user-interface controllers and compact automation modules. The 100-lead TQFP package exposes substantially more I/O than a small-outline MCU, allowing several peripheral functions to remain active simultaneously. It is also appropriate for industrial control designs where a mature 8051 core, EEPROM and USB coexist on one device. A principal design consideration is firmware and board validation. Before layout approval, engineers should use the manufacturer's pin-description table and application guidance to assign every power, ground, programming, clock and peripheral signal. USB layouts require careful routing of the data lines and placement of the required passive components. Firmware should also account for the separate program Flash, data EEPROM and SRAM regions. This page combines manufacturer-level device facts, package details, practical design guidance, sourcing answers and a structured comparison of related CY8C38xx devices. These engineering views support component selection, firmware planning, PCB design and supply-chain assessment without duplicating the role of the manufacturer datasheet.

Permintaan RFG Kontak
CY8C3865LTI-205 - 67MHz PSoC 3 MCU | Cypress Semiconductor
CY8C3865LTI-205

CY8C3865LTI-205 - 67MHz PSoC 3 MCU | Cypress Semiconductor

The Cypress Semiconductor CY8C3865LTI-205 is an 8-bit PSoC 3 microcontroller in the CY8C38xx family, operating at up to 67 MHz with 32 KB of embedded flash memory and 4 KB of SRAM in a 68-QFN surface-mount package. The device combines an 8051-compatible processor core with programmable digital and analog resources for embedded control, sensing, and communications designs. A programmable system-on-chip, or PSoC, combines a microcontroller core with configurable peripheral blocks on one integrated circuit. The PSoC 3 architecture belongs to the broader microcontroller and embedded-processing hierarchy. By placing programmable digital functions, analog conversion resources, and general-purpose I/O near the processor core, the architecture can reduce external discrete circuitry and allow peripheral behavior to be adapted through device configuration and firmware. The CY8C3865LTI-205 provides a 67 MHz operating speed, 32 KB of flash program memory, and 4 KB of SRAM. Its 8-bit processor architecture and 8051 compatibility make it suitable for control-oriented embedded systems requiring responsive peripheral handling. The 68-QFN package measures 8 mm by 8 mm and supports compact, high-density PCB layouts where the exposed thermal pad and fine-pitch routing requirements can be managed correctly. The CY8C38xx family supports configurable system resources rather than relying on a fixed peripheral map. This approach is useful when a design needs mixed-signal behavior, digital control logic, serial communications, timing functions, or application-specific signal conditioning. Final peripheral performance, voltage limits, temperature ratings, and electrical characteristics should be confirmed against the manufacturer datasheet for the exact ordering code and temperature grade. Typical applications include industrial sensing and control modules, connected equipment, building automation interfaces, compact consumer products, motor and actuator controllers, and IoT edge nodes. In these systems, the MCU can combine control logic with mixed-signal functions while reducing component count. The 32 KB flash capacity is suitable for moderate firmware workloads, while 4 KB of SRAM supports real-time control, protocol stacks, and data buffering. PCB implementation requires careful treatment of the 68-QFN footprint. Place the exposed pad according to the manufacturer land-pattern and thermal-via guidance, maintain the specified solder-mask and paste geometry, and route high-impedance or noise-sensitive signals away from fast-switching and power-conversion nodes. Validate the assembled board for shorts between the fine-pitch leads and exposed pad before programming. This page consolidates the confirmed device identity, memory configuration, package information, sourcing links, engineering-use guidance, and compatibility limits into one practical reference for evaluating the CY8C3865LTI-205 in new embedded designs.

Permintaan RFG Kontak
CY8C3865PVI-060 - 67MHz 32KB PSoC 3 MCU | Infineon
CY8C3865PVI-060

CY8C3865PVI-060 - 67MHz 32KB PSoC 3 MCU | Infineon

The Infineon Technologies CY8C3865PVI-060 is an 8-bit PSoC 3 programmable system-on-chip microcontroller with a 67 MHz maximum clock, 32 KB flash program memory, 4 KB SRAM, and a 48-pin SSOP package. It combines an 8051-compatible CPU with programmable analog and digital peripherals, EEPROM, flash protection, and an interrupt system containing 27 sources with 8 priority levels. A programmable system-on-chip, or PSoC, combines a microcontroller core with configurable analog and digital resources on one integrated circuit. PSoC 3 belongs to the hierarchy of microcontrollers, embedded processors, programmable system-on-chips, and semiconductor devices. Unlike a fixed-function microcontroller, its internal signal-chain blocks can be configured by firmware, allowing designers to adapt analog interfaces and digital control logic without changing the PCB. The CY8C3865PVI-060 provides 32 KB of flash organized as 32K x 8, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash. Its dual datapointer architecture improves data-transfer flexibility, while four flash-protection levels support controlled firmware access. An interrupt system with 27 sources and 8 priority levels supports responsive event handling across embedded control tasks. The device operates from a 0.5 V to 5.5 V range according to its distributor technical listing. Its 8051-compatible single-core architecture provides a familiar instruction set and an established embedded-control ecosystem. The PSoC architecture allows analog functions such as ADC, DAC, comparators, and timer blocks to be coordinated with programmable digital logic, depending on the selected device configuration and firmware. Typical uses include industrial control panels, instrumentation, environmental monitoring, consumer interfaces, embedded motor and power controls, communication equipment, and compact control systems requiring mixed-signal handling. Its combination of flash, SRAM, EEPROM, programmable peripherals, and 27 interrupt sources is particularly useful in designs that consolidate several discrete functions into one controller. Design planning should account for the 48-pin SSOP footprint, available I/O assignments, voltage operating limits, clock configuration, and firmware resource allocation. Review the pin-description table, package drawing, power requirements, and peripheral configuration in the manufacturer datasheet before assigning PCB tracks or selecting decoupling and external support components. This page organizes the key electrical, memory, package, and application information for CY8C3865PVI-060 and provides a practical framework for comparing same-footprint PSoC 3 MCU options. Engineers should verify firmware, peripheral, lifecycle, and qualification details for the exact production configuration before releasing a design.

Permintaan RFG Kontak
CY8C3866AXA-035 - 67MHz 8051 MCU, 64KB Flash | Infineon
CY8C3866AXA-035

CY8C3866AXA-035 - 67MHz 8051 MCU, 64KB Flash | Infineon

Infineon Technologies CY8C3866AXA-035 is an automotive-qualified 8-bit PSoC 3 microcontroller with a 67 MHz 8051 core, 64 KB of flash memory, 8 KB of SRAM, and a 100-pin TQFP package measuring 14 mm by 14 mm. It is designed for embedded control applications that require programmable analog and digital peripherals alongside a compact 8051-compatible architecture. A PSoC, or programmable system-on-chip, combines a microcontroller core with configurable analog and digital blocks. Within the product hierarchy, the CY8C3866AXA-035 belongs to the PSoC 3 CY8C38xx family, combines an 8051-compatible MCU with programmable resources, and ultimately serves as a mixed-signal embedded-control IC. This integration allows designers to implement sensing, control, and communications functions on one device rather than using separate analog and digital components. The principal operating characteristics include an 8-bit 8051 instruction set, operation up to 67 MHz, and 64 KB of embedded flash organized as 64K by 8 bits. The device includes 8 KB of SRAM and accepts a supply range spanning 0.5 V to 5.5 V according to the product listing. Its 100-TQFP package provides a high pin count suitable for designs requiring numerous external peripheral connections. The CY8C38xx architecture is particularly useful when an application must combine deterministic control with programmable signal conditioning. Programmable analog and digital blocks can replace fixed-function glue logic, while the 8051-compatible core handles firmware, state machines, and communications. Designers should still verify startup behavior, clock limits, and peripheral availability for the specific device variant before finalizing a board. Typical applications include automotive body and comfort controllers, industrial monitoring equipment, sensor-interface systems, motor and actuator controllers, and compact embedded products that need both digital processing and programmable analog functions. The 67 MHz operating rate supports responsive control tasks while the 64 KB flash capacity accommodates application firmware and configuration data. For PCB implementation, use the 100-pin TQFP footprint and follow the manufacturer pin-description table when assigning power, ground, clock, programming, and peripheral signals. Pay particular attention to decoupling, exposed routing requirements, and startup configuration. Firmware development should use the programming tools and PSoC Creator workflow supported by the CY8C38xx family. This product page combines the device identity, memory organization, package details, verified drop-in family variants, application guidance, and engineering design notes in a searchable format. It helps engineers compare configuration options while retaining the exact 100-pin footprint and 8051-based architecture needed for targeted redesigns.

Permintaan RFG Kontak
CY8C3866AXA-038 - 8-Bit 67MHz 64KB Flash MCU | Infineon Technologies
CY8C3866AXA-038

CY8C3866AXA-038 - 8-Bit 67MHz 64KB Flash MCU | Infineon Technologies

The Infineon Technologies CY8C3866AXA-038 is an 8-bit PSoC 3 CY8C38xx microcontroller featuring a 67 MHz processor, 64 KB flash memory, and a 100-pin TQFP/LQFP package. It belongs to the programmable embedded system-on-chip family, combining a microcontroller core with configurable digital and analog peripherals in one integrated device. The device is identified as an 8051-based microcontroller in distributor and manufacturer-related product listings, making it suitable for embedded control designs requiring programmable logic, mixed-signal peripherals, and flexible peripheral configuration. A PSoC 3, or programmable system-on-chip, is a microcontroller platform that combines a CPU core with configurable analog and digital blocks rather than relying only on fixed peripheral functions. This architecture allows engineers to route signals, configure timers, control analog functions, and implement application-specific peripheral behavior through programmable logic and software-defined resources. The CY8C38xx family is designed for embedded control, sensing, communications, and industrial interface applications where a combination of deterministic control and adaptable peripherals is useful. The CY8C3866AXA-038 provides 64 KB of flash memory and operates at up to 67 MHz according to its product listing. Its 100-terminal package supports a substantially larger pin count than smaller microcontroller packages, providing access to the device's digital and analog resources. The listed 14 x 14 mm package format is identified as 100-TQFP by one distributor and LQFP-100 by another listing, so the package drawing and land pattern should be confirmed against the mechanical drawing in the manufacturer documentation before PCB release. Typical applications for the CY8C3866AXA-038 include industrial control panels, sensor-conditioning systems, motor and actuator controllers, communications equipment, and consumer products with configurable mixed-signal interfaces. The 8051-based architecture and programmable peripheral resources make the device especially relevant to designs that benefit from flexible pin multiplexing and configurable analog or digital blocks rather than a fixed application-specific controller. The principal design consideration is package and pin verification. Because this MPN is offered in a 100-pin package, the PCB footprint, exposed pad or thermal requirements if applicable, and every peripheral signal assignment must be checked against the correct mechanical and pinout documentation. Firmware configuration should also be reviewed before production because programmable PSoC resources can change signal routing and timing behavior between applications.

Permintaan RFG Kontak
CY8C3866AXA-040 - 67MHz 8051 MCU with 64KB Flash | Infineon
CY8C3866AXA-040

CY8C3866AXA-040 - 67MHz 8051 MCU with 64KB Flash | Infineon

The Infineon CY8C3866AXA-040 is an 8-bit PSoC 3 CY8C38xx microcontroller with a 67 MHz 8051 core, 64 KB of flash memory, and 8 KB of SRAM in a 100-pin TQFP package. The device combines programmable analog, digital, and LCD functions with a microcontroller core, creating a compact platform for embedded control, sensing, communications, and user-interface applications. A programmable system-on-chip, or PSoC, integrates a CPU, memory, analog peripherals, digital peripherals, and configurable interconnect resources on one die. Within the broader semiconductor hierarchy, the CY8C3866AXA-040 is a microcontroller and system-on-chip that replaces separate combinations of processor, memory, interface logic, analog circuitry, and display-control components. Its 8051-compatible core provides a familiar embedded-control architecture with deterministic peripheral integration. The principal device characteristics include a maximum clock frequency of 67 MHz, 64 KB of flash program memory, and 8 KB of SRAM. The CY8C38 family also supports analog, digital, and LCD-oriented functions, allowing designers to reserve resources for mixed-signal control rather than relying only on fixed-purpose digital peripherals. This integration can reduce board area and the number of external components in compact industrial, consumer, and communications designs. The 100-TQFP package provides a substantial number of external connections for power, ground, programming, clock, communications, analog, digital, and display functions. Although the package supports a broad peripheral mix, final peripheral availability, routing, and pin multiplexing must be checked in the device configuration tables. Clocking, programming, reset, and power sequencing should also be validated against the device's electrical and pin requirements before schematic capture. Typical uses include industrial control panels, compact sensor nodes, touch-enabled interfaces, display controllers, building automation modules, and low-cost embedded instruments. The LCD capability is particularly useful for local human-machine interfaces, while the analog and digital resources support mixed-signal sensing and actuator control. The 67 MHz core also provides additional processing headroom for protocols and supervisory logic. A key design consideration is that firmware, peripheral configuration, and the selected package's pin assignments must be coordinated as one design. Use the manufacturer pin-description table, memory map, and configuration guidance when assigning PCB tracks. Confirm the exact ordering suffix and temperature-grade requirements against the system operating environment before releasing the production BOM. This page consolidates component specifications, drop-in-replacement findings, package considerations, comparison data, and practical application guidance into a design-focused reference for engineers evaluating the CY8C3866AXA-040.

Permintaan RFG Kontak
CY8C3866AXI-035 - 8051 PSoC 3 MCU 64KB Flash 67MHz | Infineon
CY8C3866AXI-035

CY8C3866AXI-035 - 8051 PSoC 3 MCU 64KB Flash 67MHz | Infineon

The Infineon CY8C3866AXI-035 is a member of the PSoC 3 family of programmable system-on-chip devices, integrating an 8-bit 8051 core running up to 67 MHz with 64 KB of Flash program memory, 8 KB SRAM, 1 KB data EEPROM, and a rich mix of programmable analog and digital peripherals in a 100-pin TQFP (14x14 mm) package. The 8051 core pairs with a DMA controller and digital filter processor (DFP) for high-throughput signal processing while keeping the architecture easy to program with standard 8051 toolchains. What is a PSoC (Programmable System-on-Chip)? A PSoC is a microcontroller family that combines a CPU core with configurable analog blocks (ADCs, DACs, op-amps, comparators) and configurable digital blocks (UDBs, timers, UART/SPI/I2C) on a single die. The 'system-on-chip' hierarchy is: PSoC -> mixed-signal MCU -> microcontroller -> embedded processor -> semiconductor. PSoC 3 specifically uses the legacy-friendly 8051 core with industry-best ultra-low-power operation and wide voltage tolerance, making it a versatile platform for industrial, consumer, and white-goods designs. Key features of the CY8C3866AXI-035 include: 24 Universal Digital Blocks (UDBs) for custom logic, timers and state machines; one CAN 2.0b interface; 1.71 V to 5.5 V operating voltage range with on-chip voltage regulation; up to 62 GPIO; industrial temperature grade (-40 C to +85 C); and four Flash protection levels with 8 KB ECC Flash. The single-cycle 8051 core, dual data pointers, and integrated PHUB with eight spokes enable efficient DMA-driven data movement without CPU overhead. Typical applications include industrial control, motor drive signal conditioning, sensor hubs, USB/CAN bridges, and human-machine interface (HMI) front-ends where the analog and digital configurability of PSoC reduces BOM cost and PCB area. Its 0.5 V to 5.5 V supply tolerance allows direct connection to batteries, regulated 3.3 V rails, and legacy 5 V logic in mixed-voltage systems. When designing with the CY8C3866AXI-035, allocate the 24 UDBs early in the schematic phase because they are the device's most constrained resource, and respect the 100-pin TQFP decoupling scheme (one 100 nF per power pin). For new designs, consider the newer PSoC 4000S/4100S families only if your firmware is portable to ARM Cortex-M0+; otherwise, the CY8C3866AXI-035 remains a strong, mature 8051-based mixed-signal choice. This page synthesizes distributor pricing, drop-in alternatives within the PSoC 3 family, and practical design notes not aggregated on any single vendor page.

Permintaan RFG Kontak
CY8C3866AXI-039 - 67MHz 8051 PSoC MCU with 64KB Flash
CY8C3866AXI-039

CY8C3866AXI-039 - 67MHz 8051 PSoC MCU with 64KB Flash

The Infineon Technologies CY8C3866AXI-039 is an 8-bit PSoC 3 CY8C38xx programmable system-on-chip microcontroller with a 8051 CPU operating up to 67 MHz, 64 KB of embedded flash memory, 62 GPIO for analog and LCD functions, and a 100-lead TQFP package measuring 14 mm by 14 mm. It combines programmable digital and analog resources with USB connectivity in a single integrated device. A PSoC, or programmable system-on-chip, is a microcontroller architecture that integrates a CPU, programmable digital blocks, analog peripherals, memory, and communication peripherals into one device. Its programmable analog and digital sections allow product functions to be configured through firmware, reducing reliance on discrete external components while consolidating control, interface, and signal-conditioning functions. The CY8C3866AXI-039 provides 64 KB of flash, 8 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash according to the device information published by Keil and the manufacturer product listing. Its 24 Universal Digital Blocks support configurable digital functions, while the PSoC 3 architecture also includes programmable analog resources for mixed-signal designs. The device offers one Fast USB 2.0 interface, dual datapointers, and an interrupt system with 27 sources and eight priority levels. The operating supply range is 0.5 V to 5.5 V. This broad range supports systems that need low-voltage analog or digital rails while retaining compatibility with conventional 5 V logic. The 8051 CPU and its extensive peripheral integration make the device suitable for control-intensive products requiring USB, display support, programmable signal handling, or mixed analog-and-digital acquisition. Typical applications include USB-connected data acquisition, industrial control panels, medical monitoring equipment, programmable instruments, touch interfaces, LCD-based user interfaces, and embedded control subsystems. Designers can assign programmable digital and analog blocks to functions such as timers, counters, serial communication, signal conditioning, and interface control through the PSoC development environment. For a new PCB, verify every power, ground, programming, USB, and peripheral connection against the manufacturer pin description and package drawing before layout. Pay particular attention to decoupling, analog-ground strategy, USB signal routing, and exposed supply requirements; these details can materially affect signal integrity and reliability even when the nominal logic functions are correct. This product record combines the manufacturer's device description, distributor specifications, package information, and engineering-oriented replacement guidance. It highlights the principal architecture, memory, connectivity, and application characteristics while distinguishing a confirmed close-family option from alternatives that require additional compatibility verification.

Permintaan RFG Kontak
CY8C3866AXI-040 - 8051 PSoC 3, 64KB Flash, 67MHz | Infineon
CY8C3866AXI-040

CY8C3866AXI-040 - 8051 PSoC 3, 64KB Flash, 67MHz | Infineon

The Infineon CY8C3866AXI-040 is an 8-bit 8051-based PSoC 3 (CY8C38xx family) programmable system-on-chip MCU integrating 64KB Flash, 8KB SRAM, 2KB EEPROM, and configurable analog/digital/LCD blocks, all in a 100-pin TQFP (14x14 mm) package with an industrial operating temperature range. A PSoC (Programmable System-on-Chip) is a category of mixed-signal microcontroller in which the analog and digital peripheral functions are defined by routing through universal analog and digital blocks rather than fixed silicon. PSoC 3 devices specifically pair an 8051 core with high-performance programmable analog (operational amplifiers, ADCs, DACs, comparators, CapSense), programmable digital (UDBs, timers, PWM, UART, SPI, I2C, CAN, USB, LCD), and on-chip memory, sitting in the hierarchy: PSoC 3 -> mixed-signal MCU -> microcontroller -> embedded IC -> semiconductor. This makes them true system-level solutions because the same silicon can implement different peripheral sets in hardware through programmable routing. Key features include an 8051 single-core CPU running up to 67MHz, 64KB program Flash with ECC, 8KB SRAM, and up to 2KB EEPROM. The device integrates a 12-bit SAR ADC with up to 1 Msps, multiple 8-bit IDACs, four op-amps, four configurable TCPWM blocks, full-speed USB, CAN 2.0b, and an LCD driver supporting up to 46 segments x 4 commons. Operating voltage is 0.5V to 5.5V with industrial-grade temperature range. The architecture combines an 8051 core with a DMA controller (PHUB) supporting 8 parallel access paths, eliminating CPU stalls during data movement between peripherals and memory. The Universal Digital Blocks (UDBs) implement custom state machines and datapaths in Verilog-equivalent primitives, while the Universal Analog Blocks (UABs) configure op-amps, comparators and references. Typical applications include industrial HMI panels with LCD and CapSense, USB peripherals (HID, CDC, vendor class), CAN-based automotive body controllers, programmable sensor signal conditioners, and low-power battery-powered instruments. Designers value the integrated LCD + touch + analog front end that would otherwise require 3-4 separate ICs. A key design consideration is that PSoC 3 development requires PSoC Creator IDE with the CY8C38xx component catalog - bare-metal 8051 register code does not exercise the programmable routing. Plan toolchain availability before committing to architecture. This page synthesizes Infineon distributor pricing, Infineon-documented drop-in alternatives in the same 100-TQFP footprint, and PSoC Creator-aware design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
CY8C3866LTI-209 - 67MHz 8051 PSoC 3 MCU | Infineon
CY8C3866LTI-209

CY8C3866LTI-209 - 67MHz 8051 PSoC 3 MCU | Infineon

The Infineon Technologies CY8C3866LTI-209 is a PSoC 3 programmable system-on-chip microcontroller with an 8-bit 8051 CPU, 67 MHz maximum operating frequency, and 64 KB of embedded Flash memory. It is packaged in a 68-pin QFN measuring 8 mm by 8 mm and includes a 20-bit ADC and CAPSENSE capacitive-sensing capability. The device operates from 1.8 V, 2.5 V, 3.3 V, or 5 V, making it suitable for embedded systems that need programmable analog and digital resources in one integrated device. A PSoC, or programmable system-on-chip, combines a microcontroller core with configurable analog and digital peripherals on one semiconductor. In the broader hierarchy, the CY8C3866LTI-209 is an 8-bit microcontroller, embedded controller, and programmable system-on-chip rather than a general-purpose processor. Its 8051 instruction set and integrated peripherals reduce external component count in touch sensing, control, and mixed-signal embedded products. The key features of the CY8C3866LTI-209 include a 67 MHz 8051 CPU, 64 KB Flash, 8 KB SRAM, a 20-bit ADC, and CAPSENSE. The combination of programmable analog and digital blocks allows designers to adapt peripheral behavior to a product rather than relying only on fixed hardware. Its operating-voltage options of 1.8 V, 2.5 V, 3.3 V, and 5 V support both low-voltage portable systems and conventional industrial control environments. The part belongs to the CY8C38xx PSoC 3 family and combines CPU execution, flash program storage, SRAM, analog conversion, and capacitive sensing. Its 8-bit architecture is intended for compact control loops, user interfaces, sensor conditioning, and product differentiation through programmable peripherals. The 68-QFN package also supports dense PCB layouts, although its exposed thermal pad and fine-pitch routing require careful layout planning. Typical applications include capacitive-touch control panels, industrial HMI terminals, home appliances, sensor interface modules, programmable instrumentation, and low-power embedded controllers. CAPSENSE is useful when a reliable user interface must operate through a panel, while the 20-bit ADC supports analog measurement and signal-conditioning tasks. The 8051 core is most appropriate where deterministic low-to-moderate processing demand matters more than high-performance application processing. A primary design consideration is power and thermal planning. The exact operating current, flash endurance, ADC accuracy, GPIO configuration, and programming workflow should be checked against the manufacturer datasheet before final qualification. The exposed-pad package requires a properly designed thermal and ground plane, while firmware should be validated across voltage, temperature, and peripheral-loading conditions. This product page consolidates the exact ordering information, core specifications, application guidance, package constraints, and sourcing workflow for CY8C3866LTI-209. It also identifies where design engineers should consult the official datasheet for complete pin assignments, register definitions, electrical limits, and programming information.

Permintaan RFG Kontak
CY8C3866PVI-021 - PSoC 3 8051 64KB Flash 67MHz MCU | Infineon
CY8C3866PVI-021

CY8C3866PVI-021 - PSoC 3 8051 64KB Flash 67MHz MCU | Infineon

The Infineon CY8C3866PVI-021 is a CY8C38xx PSoC 3 programmable system-on-chip featuring a single-core 8051 CPU at up to 67 MHz, 64 KB of Flash program memory, 8 KB SRAM, and 1 KB EEPROM, all integrated into a 48-pin SSOP package. The part combines an 8-bit 8051 core with rich programmable analog (20-bit Delta-Sigma ADC, 12-bit SAR ADC) and programmable digital blocks (UDBs), making it suitable for mixed-signal embedded applications where software flexibility matters. The wide 0.5V to 5.5V operating voltage range, integrated USB 2.0 Full-Speed peripheral, and CapSense support further reinforce its applicability to industrial control, USB HID, and human-interface designs. What is a PSoC? PSoC (Programmable System-on-Chip) is a family of microcontrollers that integrate a CPU core (8051, ARM Cortex-M0/M3/M4 depending on generation) with a programmable analog and digital fabric. PSoC 3 is the 8-bit 8051-based generation, while PSoC 4 (Cortex-M0), PSoC 5LP (Cortex-M3), and PSoC 6 (Cortex-M4 + M0+) are the more recent families. PSoC 3 sits in the hierarchy: PSoC 3 -> PSoC family -> programmable SoC -> microcontroller -> embedded IC -> semiconductor. The configurable fabric allows routing of analog blocks (op-amps, ADCs, DACs, comparators) and digital blocks (timers, UARTs, SPIs, PWMs) via on-chip interconnect, replacing many discrete components. Key features of the CY8C3866PVI-021 include 24 Universal Digital Blocks (UDBs), 4 DMA channels with a Peripheral Hub Unit (PHUB) providing 8 parallel access spokes, a 67 MHz maximum CPU clock, 27 interrupt sources with 8 priority levels, integrated Full-Speed USB 2.0, and 4 levels of Flash protection. The IC also integrates a 20-bit Delta-Sigma ADC plus a 12-bit SAR ADC, two 8-bit IDACs, four 7-bit VDACs, and four unity-gain op-amps configurable as PGAs, TIA, or comparators. Up to 62 GPIO are available depending on package. Typical use cases for the CY8C3866PVI-021 include industrial motor and pump drivers, USB-enabled embedded peripherals, smart sensors and CapSense touch interfaces, programmable logic replacements, mixed-signal data acquisition front-ends, and human-machine interface (HMI) panels. When designing with this part, note that the 8051 core is 8-bit and slower than modern Cortex-M alternatives, but the integrated analog fabric and Infineon/Cypress PSoC Creator toolchain accelerate development of mixed-signal products where analog pins are a priority. For pure digital or low-power designs, an ARM-based PSoC 4/6 is usually a better choice. This page synthesizes distributor pricing, drop-in alternatives in the same 48-SSOP package, and practical design notes that go beyond the manufacturer datasheet alone.

Permintaan RFG Kontak
CY8C3866PVI-070 - 67MHz PSoC 3 MCU | Infineon
CY8C3866PVI-070

CY8C3866PVI-070 - 67MHz PSoC 3 MCU | Infineon

The Infineon CY8C3866PVI-070 is an 8-bit PSoC 3 programmable system-on-chip microcontroller with a 67 MHz 8051 core, 64 KB of flash memory, and 24 universal digital blocks in a 48-pin SSOP package. It operates from 0.5 V to 5.5 V and combines a microcontroller core with configurable digital peripherals, DMA support, analog resources, and programmable system-level functions. A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates conventional processing blocks with configurable analog and digital peripherals. The CY8C38xx family places the CPU, memory, interrupt system, communication peripherals, and programmable blocks within one device, allowing engineers to tailor a circuit around a specific control requirement rather than using a fixed collection of dedicated peripherals. Key features of the CY8C3866PVI-070 include an 8051-compatible core operating up to 67 MHz, 64 KB of flash, 8 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash. Its 24 universal digital blocks can implement timers, counters, serial communications, and custom digital functions. The interrupt system supports 27 sources and eight priority levels, while an eight-port peripheral hub provides parallel access paths for efficient data movement. The device also includes programmable analog and digital functions that allow control, measurement, and communication features to be configured in firmware. A dedicated CAN 2.0b interface, dual data pointers, DMA controller, and digital filter processor extend the architecture beyond a basic 8051 controller. These resources support responsive signal acquisition and peripheral control without requiring every function to be implemented externally. Typical uses include industrial monitoring, automotive body and comfort subsystems, consumer controls, communications equipment, data acquisition, and embedded systems that combine event handling with configurable digital logic. Its broad 0.5 V to 5.5 V operating range also makes it suitable for mixed-voltage systems when the selected external components and board design support that range. Designers should account for the 48-pin SSOP footprint, provide the decoupling and programming connections required by the PSoC 3 family, and verify pin multiplexing before assigning external functions. The configurable architecture reduces external component count, but firmware configuration, pin routing, and resource allocation must be checked against the device limits and application timing. This page combines manufacturer specifications, package information, application guidance, sourcing details, and technical comparisons for engineers evaluating the CY8C3866PVI-070. It also distinguishes the verified properties of this exact ordering code from functions that require final review of the manufacturer datasheet and device configuration.

Permintaan RFG Kontak
CY8C4013SXI-410 - 16MHz Cortex-M0 PSoC 4 MCU | Infineon
CY8C4013SXI-410

CY8C4013SXI-410 - 16MHz Cortex-M0 PSoC 4 MCU | Infineon

The Infineon Technologies CY8C4013SXI-410 is a PSoC 4000 series 32-bit microcontroller built around an Arm Cortex-M0 core operating at up to 16 MHz, with 8 KB of flash memory, 2 KB of SRAM, and an 8-pin SOIC package. Its 1.71 V to 5.5 V operating range supports low-voltage battery-powered systems as well as conventional 3.3 V and 5 V industrial and consumer equipment. A programmable system-on-chip is a microcontroller that integrates a processor core with configurable analog and digital peripheral blocks. Within the device hierarchy, the CY8C4013SXI-410 belongs to the PSoC 4 family, combines an Arm Cortex-M0 microcontroller with programmable resources, and provides a compact platform for embedded control, sensor conditioning, and low-speed communication. The PSoC architecture can reduce the need for separate analog and digital companion components. Key device resources include 8 KB of flash for program storage, 2 KB of SRAM for working memory, and 16 MHz maximum processing speed. I2C connectivity supports communication with sensors, EEPROMs, and other low-speed peripherals, while timer and PWM resources support periodic control tasks, dimming, and simple motor or actuator control. The specified industrial temperature range is -40°C to 85°C. The Arm Cortex-M0 architecture provides a deterministic, low-complexity execution environment with an efficient instruction set and broad embedded-tool support. Its 32-bit processing capability and compact memory organization are suited to cost-sensitive control nodes that collect data, manage a peripheral bus, and execute application firmware without requiring a separate digital signal processor or higher-performance application processor. Typical uses include distributed industrial sensing, compact environmental monitors, battery-powered sensor nodes, LED control modules, small appliance controllers, and service-port equipment. An I2C interface is particularly useful in designs where a microcontroller must monitor an external sensor and transfer readings to a higher-level controller. The compact SOIC package also supports through-hole assembly where surface-mount density is not required. When laying out the board, follow the manufacturer pin-description table for analog supply, ground, and general-purpose signal assignments. Keep analog and digital ground connections consistent with the recommended reference layout, and use the documented decoupling structure so the 1.71 V to 5.5 V supply range remains stable under transient loading. This page consolidates the device specifications, package details, sourcing information, replacement constraints, and practical design guidance for engineers evaluating the CY8C4013SXI-410 in compact embedded control designs.

Permintaan RFG Kontak
CY8C4013SXI-411 - 16MHz PSoC 4 MCU, 8KB Flash | Infineon
CY8C4013SXI-411

CY8C4013SXI-411 - 16MHz PSoC 4 MCU, 8KB Flash | Infineon

Infineon Technologies CY8C4013SXI-411 is a PSoC 4 programmable system-on-chip microcontroller with a 32-bit Arm Cortex-M0 processor, 16 MHz operating frequency, 8 kByte of flash memory, and 2 kByte of SRAM. The device operates from 1.71 V to 5.5 V and is housed in a 16-pin SOIC package. Its 13 general-purpose I/Os support compact embedded-control designs that require both digital control and programmable analog functions. A PSoC is a mixed-signal microcontroller architecture that combines a processor, programmable analog and digital blocks, and configurable routing on one integrated device. The CY8C4013SXI-411 belongs to the PSoC 4000 family, the smallest member of the PSoC 4 platform. This hierarchy places it between application-specific embedded controllers and conventional microcontrollers, while its analog peripherals allow designers to adapt signal paths without relying on a large collection of discrete components. Key features include an Arm Cortex-M0 core operating at up to 16 MHz, 8 kByte of program flash, 2 kByte of SRAM, 13 GPIOs, and a broad 1.71 V to 5.5 V supply range. The low-voltage operating envelope makes the device suitable for energy-conscious control systems, while the GPIO count provides practical connectivity for sensors, switches, indicators, communications interfaces, and discrete actuators. The 16-SOIC format also supports conventional surface-mount assembly and hand-soldered prototype workflows. The PSoC architecture combines standard microcontroller functions with programmable and reconfigurable blocks connected through flexible routing. This allows peripheral behavior to be adapted to a particular control task and can reduce the need for external signal-conditioning components. Firmware still has strict limits: 8 kByte of flash constrains application size, and 2 kByte of SRAM requires careful stack, buffer, and state-management planning. The 16 MHz Cortex-M0 core is suitable for control loops that do not require high-bandwidth processing. Typical uses include HVAC controllers, building equipment, environmental monitoring, compact sensor nodes, industrial control modules, and low-power appliance electronics. A CY8C4013SXI-411 can coordinate digital inputs and outputs while using PSoC analog resources for signal acquisition or conditioning. For connected products, the controller can also manage a serial communications interface, although the application-specific protocol and supporting components must be selected during design. A critical design consideration is power-supply integrity. The 1.71 V to 5.5 V operating range requires a regulated rail that remains within limits at the MCU pins across temperature, load transients, and startup conditions. Place the required bypass capacitors close to the power and ground pins, route high-current return paths away from sensitive analog inputs, and confirm the selected PSoC configuration, clocking, and pin assignment against the manufacturer pin-description table. This page combines the exact ordering characteristics of the CY8C4013SXI-411 with engineering guidance for power, layout, firmware, and verification. It also distinguishes pin-compatible family options from changes that require a different package, voltage plan, or software configuration, helping engineers make a replacement decision without treating every similar MCU as a true drop-in substitute.

Permintaan RFG Kontak
CY8C4014PVI-412 - 16MHz PSoC 4 MCU | Infineon
CY8C4014PVI-412

CY8C4014PVI-412 - 16MHz PSoC 4 MCU | Infineon

Infineon CY8C4014PVI-412 is a PSoC 4000 programmable system-on-chip microcontroller with a 16 MHz Arm Cortex-M0 CPU, 16 kB of flash memory, 2 kB of SRAM, and a 1.71 V to 5.5 V operating range. The device is housed in a 28-pin SSOP package and combines a microcontroller core with programmable analog and digital resources for compact embedded control designs. A programmable system-on-chip, or PSoC, is an embedded-controller category that integrates a CPU, programmable analog blocks, programmable digital peripherals, and configurable routing into one device. This integration allows functions such as analog conversion, timers, serial communication, and signal conditioning to be implemented in firmware while reducing the number of discrete components required around the controller. The CY8C4014PVI-412 provides 16 kB of flash for program storage and 2 kB of SRAM for working memory. Its Cortex-M0 processor operates at up to 16 MHz, providing a practical balance between processing throughput, power consumption, and design complexity. The 1.71 V to 5.5 V supply range supports low-voltage embedded systems and equipment operating from common low-voltage rails. Its PSoC architecture uses programmable analog and digital blocks connected through configurable routing. According to the manufacturer datasheet, the device includes two current DACs for general-purpose or capacitive-sensing use. These resources make the controller suitable for designs that combine firmware-configurable signal acquisition with conventional control functions without relying on a large collection of fixed peripherals. Typical applications include capacitive-sensing user interfaces, compact industrial control modules, low-power sensor interfaces, consumer accessories, and small motor-control or monitoring products. The 28-pin SSOP package is useful where a conventional through-hole or surface-mount controller is needed without requiring a very dense land pattern. Designers should confirm the exact peripheral allocation, pin multiplexing, decoupling requirements, programming method, and unused-pin treatment in the manufacturer pin-description table. Software configuration must also account for the limited 2 kB SRAM, particularly when buffering data or combining multiple active peripherals. This page combines the device’s core specifications, pin-compatible family alternatives, application guidance, and design considerations to support faster component selection and board-level planning.

Permintaan RFG Kontak