EFM32GG395F1024G-E-BGA120
EFM32GG395F1024G-E-BGA120 - 48MHz Cortex-M3 MCU, 1MB Flash | Silicon Labs
The Silicon Labs EFM32GG395F1024G-E-BGA120 is an ARM Cortex-M3 based Giant Gecko microcontroller delivering 48 MHz CPU performance with 1 MB Flash and 128 KB RAM, housed in a 120-ball BGA (7x7 mm) package. It features an integrated USB 2.0 Full-Speed controller, AES encryption engine, hardware cryptographic accelerator, and the patented EFM32 low-energy peripheral architecture. The wide supply range of 1.98 V to 3.8 V supports single-cell Li-ion battery operation and USB-powered designs.
A 32-bit microcontroller (MCU) is an integrated processor core, memory, peripherals, and I/O in a single chip. The Cortex-M3 is an ARM core with Thumb-2 instruction set, hardware divide, and deterministic interrupt handling, optimized for embedded deterministic applications. Within the MCU taxonomy it sits under Cortex-M3 -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor. The Giant Gecko family further emphasizes high-memory variants (up to 1 MB GB) while preserving the EFM32 ultra-low-power DNA.
Key features include 93 digital I/O pins, 4 x 16-bit timer/counter blocks, 12-bit ADC and DAC channels, 4 USART, 2 I2C, 2 USB x Low Voltage, AES-128/256 hardware accelerator, true random number generator, 4 x 16-bit PWM outputs, and a low-energy RTC. The integrated LCD controller supports up to 8 x 36 segments without external drivers. Energy-saving modes deliver a sub-microsecond wake-up time and EM0/EM2/EM3/EM4 modes enabling deep-sleep currents below 1 uA. The debug hardware from Cortex-M3 includes Serial Wire Debug (SWD), Embedded Trace Macrocell (ETM), and Serial Wire Viewer (SWV).
Architecturally, the EFM32GG395F1024G-E-BGA120 uses a Cortex-M3 Harvard architecture with separate I-code and D-code buses, 4 GB Flash memory per function, 1 MB single-bank Flash, and peripheral reflex system allowing autonomous peripheral-to-peripheral DMA without CPU intervention. This enables complex power-aware tasks to run while the CPU stays in EM2 sleep. The hardware AES engine performs AES-128/256 encryption in single clock cycles, and the TRNG provides a NIST-compliant entropy source for cryptographic applications.
Typical applications include USB HID peripheral, smart energy metering, building automation, smart sensor nodes, industrial control, low-power wireless sensor networks, wearable fitness devices, and battery-powered IoT HVAC controllers. The integrated USB peripheral supports both device and host modes, making the part well suited to USB-equipped IoT devices. The Giant Gecko high-memory configuration (1 MB GB) enables rich HMI interfaces with embedded graphics or USB device stacks. The wide GPIO count of 93 supports multi-segment LCD or keypad-driven products. A common use is a USB dongle for secure token provisioning and key exchange.
When designing with this MCU, the BGA-120 package requires careful PCB layout with at least 4 routing layers, controlled-impedance traces for USB DP/DM, and a solid ground plane for analog performance. Use a 1 uF decoupling capacitor per VDD pin, place a 32.768 kHz crystal on the update output, and route the SWD lines (SWDIO/SWDCLK) as a 2-wire debug interface with series-reset 10 kohm pull-up on SWDIO. The exposed thermal pad must be soldered to the PCB for mechanical reliability and thermal dissipation. For USB operation, the VBUS pin requires a 5 V to 3.3 V regulator on the GB85.
This page synthesizes distributor pricing, drop-in same-family alternatives, USB peripheral design references, and practical design notes not found in the manufacturer datasheet alone.
Permintaan RFG
Kontak