AD8250ARMZ vs AD8251ARMZ Perbandingan
Perbandingan bersamaan detil AD8250ARMZ dari Analog Devices dan AD8251ARMZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | AD8250ARMZ | AD8251ARMZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 1 | — |
| Amplifier Type | Instrumentation Amplifier (digitally programmable gain) | Instrumentation Amplifier |
| Available Gains | 1, 2, 5, 10 (digitally selected) | — |
| Small-Signal Bandwidth (G=1) | 10 MHz | — |
| Slew Rate | 20 V/µs | 20 V/µs (minimum) |
| Settling Time (0.001%) | 615 ns (max) | 785 ns (maximum) |
| Total Harmonic Distortion | -110 dB | — |
| Input Voltage Noise Density | 1.5 nV/√Hz | — |
| Input Offset Voltage (max) | 75 µV | — |
| Input Offset Drift (max) | 0.5 µV/°C | — |
| Input Impedance | GΩ | GΩ |
| Supply Voltage (Dual) | ±5 V to ±15 V | — |
| Supply Voltage (Single) | 5 V to 30 V | — |
| Arus Memerintah | 4.5 mA (typ, ±15 V) | — |
| Suhu Kerja | -40°C to +85°C | — |
| Paket | 10-pin MSOP (RM-10) | 10-lead MSOP |
| Tipe Mounting | Surface Mount | Surface Mount |
| Tipe Output | Push-Pull (rail-to-rail output) | — |
| Level MSL | 1 | 1 (unlimited) |
| Status RoHS | Compliant | Compliant |
| Number of Circuits | — | 1 |
| Programmable Gain Values | — | 1, 2, 4, 8 |
| Gain Setting Method | — | Digital (parallel logic) or transparent gain-pin |
| Bandwidth (-3 dB) | — | 10 MHz |
| CMRR (G=8, DC) | — | 98 dB (minimum) |
| Gain Drift | — | 10 ppm/°C (maximum) |
| Offset Drift (G=8) | — | 1.8 µV/°C (maximum) |
| Total Harmonic Distortion (THD) | — | -110 dB |
| Supply Voltage Range | — | ±5 V to ±15 V |
| Quiescent Current (typical) | — | [DATA_NEEDED: quiescent current value] |
| Rentang Suhu Kerja | — | -40°C to +85°C |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED] |