ADM483ARZ vs ADM483JRZ Perbandingan
Perbandingan bersamaan detil ADM483ARZ dari Analog Devices dan ADM483JRZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ADM483ARZ | ADM483JRZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Tegangan Pemuat | 5 V | 4.75 V to 5.25 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Duplex Mode | Half-duplex | Half-duplex |
| Supported Standards | EIA RS-485 and EIA RS-422 | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Arus Pemuat | 120 uA | — |
| Shutdown Supply Current | 100 nA | 100 nA |
| Bus Common-Mode Range | -7 V to +12 V | -7 V to +12 V |
| Maximum Transceivers Per Bus | 32 transceivers | — |
| Rentang Suhu Kerja | -40°C to +85°C | -40 °C to +85 °C |
| Driver Output State | High impedance when disabled or powered off | — |
| Slew Rate | Slew-rate limited | — |
| Protection Features | Thermal shutdown and short-circuit protection | Thermal shutdown and short-circuit protection |
| Paket | 8-pin SOIC, 0.154 inch body width, 3.90 mm width | 8-SOIC, 0.154 in (3.90 mm) body width |
| Tipe Mounting | Surface mount | Surface mount |
| Compliance Standards | EIA RS-485 and EIA RS-422 | — |
| Status Lingkungan Hidup | Production | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Nominal Supply Voltage | — | 5 V |
| Supported Protocols | — | EIA RS-485 and EIA RS-422 |
| Operating Supply Current | — | 120 µA |
| Maximum Transceivers per Bus | — | 32 transceivers |
| Output Behavior When Disabled | — | High impedance |
| Driver Edge Control | — | Slew-rate limited |
| Packaging | — | Tube |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |