ADM483ARZ vs ADM483JRZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM483ARZ tarafından Analog Devices ve ADM483JRZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADM483ARZ | ADM483JRZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Besleme Gerilimi | 5 V | 4.75 V to 5.25 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Duplex Mode | Half-duplex | Half-duplex |
| Supported Standards | EIA RS-485 and EIA RS-422 | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Besleme Akımı | 120 uA | — |
| Shutdown Supply Current | 100 nA | 100 nA |
| Bus Common-Mode Range | -7 V to +12 V | -7 V to +12 V |
| Maximum Transceivers Per Bus | 32 transceivers | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | -40 °C to +85 °C |
| Driver Output State | High impedance when disabled or powered off | — |
| Slew Rate | Slew-rate limited | — |
| Protection Features | Thermal shutdown and short-circuit protection | Thermal shutdown and short-circuit protection |
| Paket | 8-pin SOIC, 0.154 inch body width, 3.90 mm width | 8-SOIC, 0.154 in (3.90 mm) body width |
| Montaj Türü | Surface mount | Surface mount |
| Compliance Standards | EIA RS-485 and EIA RS-422 | — |
| Yaşam Döngüsü Durumu | Production | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Nominal Supply Voltage | — | 5 V |
| Supported Protocols | — | EIA RS-485 and EIA RS-422 |
| Operating Supply Current | — | 120 µA |
| Maximum Transceivers per Bus | — | 32 transceivers |
| Output Behavior When Disabled | — | High impedance |
| Driver Edge Control | — | Slew-rate limited |
| Packaging | — | Tube |
| RoHS Durumu | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |