AMIS30542C5421G vs AMIS30542 Perbandingan

Perbandingan bersamaan detil AMIS30542C5421G dari onsemi dan AMIS30542 dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum AMIS30542C5421G AMIS30542
Merek onsemi onsemi
Kategori Motor Drivers Motor Drivers
Status Lingkungan Hidup Aktif Aktif
Motor Type Bipolar stepper motor Bipolar stepper motor
Konfigurasi Output Dual H-bridge (4 half-bridges) Dual H-bridge (4 half-bridges)
Arus Output Maximum 3.2 A (per coil, peak) —
Nominal Supply Voltage 12 V —
Supply Voltage Range 6 V to 30 V (per datasheet) —
Micro-step Resolution Up to 1/32 step (SPI programmable) —
Control Interface SPI (serial peripheral interface) + STEP/DIR pins —
On-chip Regulator 5 V LDO for host MCU —
Watchdog Reset Yes (hardware watchdog) —
Reset Output Yes (to host MCU) —
Protection Features Over-current, over-temperature, under-voltage lockout —
Suhu Kerja -40 C to +125 C (automotive grade) —
Paket 32-NQFP (7x7 mm) NQFP-32 (7x7 mm)
Tipe Mounting Surface Mount Surface Mount
Temperature Grade Automotive —
Level MSL [DATA_NEEDED: MSL rating] 3
Status RoHS Compliant Compliant
Maximum Phase Current (RMS) — 1500 mA
Motor Supply Voltage (VBB) — 6 V to 30 V
Logic Supply Voltage (VDD) — 3.3 V or 5 V
Micro-Step Resolution — Up to 1/32 step (programmable via SPI)
On-Chip 5 V Regulator Output — 5 V (for external MCU, up to ~50 mA)
Communication Interface — SPI (4-wire, plus NXT/DIR pins)
Integrated Fly-back Diodes — Yes (active fly-back)
Thermal Protection — Thermal warning + thermal shutdown
Diagnostic Features — Short-to-ground, short-to-supply, open-load detection
SLA (Speed/Load Angle) Output — Yes (transparent back-EMF monitor)
Rentang Suhu Kerja — -40 C to +125 C

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon