AMIS30542C5421G vs AMIS30542 Karşılaştırma

Ayrıntılı yan yana karşılaştırma AMIS30542C5421G tarafından onsemi ve AMIS30542 tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre AMIS30542C5421G AMIS30542
Marka onsemi onsemi
Kategori Motor Drivers Motor Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Motor Type Bipolar stepper motor Bipolar stepper motor
Çıkış Konfigürasyonu Dual H-bridge (4 half-bridges) Dual H-bridge (4 half-bridges)
Maksimum Çıkış Akımı 3.2 A (per coil, peak) —
Nominal Supply Voltage 12 V —
Supply Voltage Range 6 V to 30 V (per datasheet) —
Micro-step Resolution Up to 1/32 step (SPI programmable) —
Control Interface SPI (serial peripheral interface) + STEP/DIR pins —
On-chip Regulator 5 V LDO for host MCU —
Watchdog Reset Yes (hardware watchdog) —
Reset Output Yes (to host MCU) —
Protection Features Over-current, over-temperature, under-voltage lockout —
İşletim Sıcaklığı -40 C to +125 C (automotive grade) —
Paket 32-NQFP (7x7 mm) NQFP-32 (7x7 mm)
Montaj Türü Surface Mount Surface Mount
Temperature Grade Automotive —
MSL Seviyesi [DATA_NEEDED: MSL rating] 3
RoHS Durumu Compliant Compliant
Maximum Phase Current (RMS) — 1500 mA
Motor Supply Voltage (VBB) — 6 V to 30 V
Logic Supply Voltage (VDD) — 3.3 V or 5 V
Micro-Step Resolution — Up to 1/32 step (programmable via SPI)
On-Chip 5 V Regulator Output — 5 V (for external MCU, up to ~50 mA)
Communication Interface — SPI (4-wire, plus NXT/DIR pins)
Integrated Fly-back Diodes — Yes (active fly-back)
Thermal Protection — Thermal warning + thermal shutdown
Diagnostic Features — Short-to-ground, short-to-supply, open-load detection
SLA (Speed/Load Angle) Output — Yes (transparent back-EMF monitor)
İşletim Sıcaklığı Aralığı — -40 C to +125 C

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin