BSP742RIXUMA1 vs BSP452 Perbandingan
Perbandingan bersamaan detil BSP742RIXUMA1 dari Infineon dan BSP452 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BSP742RIXUMA1 | BSP452 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 12V) |
| Topologi | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| Tegangan Pemuat Kerja | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| Batas Arus | [DATA_NEEDED: current limit typical value] | — |
| Penutupan Panas | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| Paket | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-SOT223-4 (4-pin SOT-223 with tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40 °C to +150 °C | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant | — |
| Technology | — | N-channel vertical power FET with charge pump (Smart SIPMOS) |
| Number of Channels | — | 1 |
| Input Compatibility | — | CMOS compatible logic-level input, ground referenced |
| Nominal Load Current | — | 1.1 A |
| DC Continuous Load Current (DigiKey listing) | — | 700 mA |
| Supply Voltage (Vbb) | — | 60 V max (avalanche rated) |
| On-Resistance (Rds(on)) | — | [DATA_NEEDED: typical Rds(on) in mOhm] |
| Diagnostic Feedback | — | Yes (status output) |
| Protection Features | — | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery |
| ESD Rating (HBM, per datasheet) | — | Tested per MIL-STD-883D Method 3015.7 |
| Load Dump Protection | — | Per ISO 7637-1 and DIN 40839 |
| Lead-Free / RoHS | — | Yes (Infineon standard) |