BSP742RIXUMA1 vs BSP452 مقایسه
مقایسه دقیق کنار به کنار BSP742RIXUMA1 توسط Infineon و BSP452 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BSP742RIXUMA1 | BSP452 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 12V) |
| توپولوژی | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| ولتاژ تغذیه کاری | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| محدودیت جریان | [DATA_NEEDED: current limit typical value] | — |
| خاموشی حرارتی | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| بسته‌بندی | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-SOT223-4 (4-pin SOT-223 with tab) |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40 °C to +150 °C | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] |
| سطح MSL | [DATA_NEEDED: MSL rating] | — |
| وضعیت RoHS | Compliant | — |
| Technology | — | N-channel vertical power FET with charge pump (Smart SIPMOS) |
| Number of Channels | — | 1 |
| Input Compatibility | — | CMOS compatible logic-level input, ground referenced |
| Nominal Load Current | — | 1.1 A |
| DC Continuous Load Current (DigiKey listing) | — | 700 mA |
| Supply Voltage (Vbb) | — | 60 V max (avalanche rated) |
| On-Resistance (Rds(on)) | — | [DATA_NEEDED: typical Rds(on) in mOhm] |
| Diagnostic Feedback | — | Yes (status output) |
| Protection Features | — | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery |
| ESD Rating (HBM, per datasheet) | — | Tested per MIL-STD-883D Method 3015.7 |
| Load Dump Protection | — | Per ISO 7637-1 and DIN 40839 |
| Lead-Free / RoHS | — | Yes (Infineon standard) |