BTG70902EPLXUMA1 vs BTS3028SDRATMA1 Perbandingan
Perbandingan bersamaan detil BTG70902EPLXUMA1 dari Infineon dan BTS3028SDRATMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTG70902EPLXUMA1 | BTS3028SDRATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Family | PROFET+2 12V | — |
| Fungsi | Smart High-Side Power Switch | — |
| Number of Channels | 1 | — |
| Input-to-Output Ratio | 1:1 | — |
| Konfigurasi Output | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Batas Arus | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Paket | PG-TSDSO-14 (exposed pad) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| Suhu Hubung Kerja | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | AEC-Q100 |
| Status RoHS | Compliant | Compliant |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | [DATA_NEEDED: MSL rating] |
| Product Type | — | Smart Low-Side Power Switch |
| Topologi | — | 1:1 N-Channel, single channel |
| Arus Output (Max) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| Tegangan Pemuat Kerja | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| Suhu Kerja | — | -40 °C to +150 °C (junction) |
| Status Output | — | Open-drain diagnostic flag |