BTG70902EPLXUMA1 vs BTS3028SDRATMA1 비교
다음의 상세 나란히 비교: BTG70902EPLXUMA1 제조: Infineon 및 BTS3028SDRATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTG70902EPLXUMA1 | BTS3028SDRATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.99 | $0.92 |
| Product Family | PROFET+2 12V | — |
| 기능 | Smart High-Side Power Switch | — |
| Number of Channels | 1 | — |
| Input-to-Output Ratio | 1:1 | — |
| 출력 구성 | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| 전류 제한 | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| 패키지 | PG-TSDSO-14 (exposed pad) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| 동작 접합 온도 | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | AEC-Q100 |
| RoHS 상태 | Compliant | Compliant |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | [DATA_NEEDED: MSL rating] |
| Product Type | — | Smart Low-Side Power Switch |
| 토폴로지 | — | 1:1 N-Channel, single channel |
| 출력 전류 (최대) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| 동작 공급 전압 | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| 동작 온도 | — | -40 °C to +150 °C (junction) |
| Status Output | — | Open-drain diagnostic flag |