BTN9960LVAUMA1 vs BTS52001ENAXUMA1 Perbandingan
Perbandingan bersamaan detil BTN9960LVAUMA1 dari Infineon dan BTS52001ENAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTN9960LVAUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Motor Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Integrated Half-Bridge Motor Driver | Smart High-Side Power Switch |
| Topologi | P-channel high-side + N-channel low-side MOSFET with integrated driver IC | — |
| Path Resistance (typ @ 25C) | 9.7 mOhm | — |
| Overcurrent Detection Threshold | 35 A | — |
| Supply Voltage Range (operating) | 8 V to 18 V | — |
| Supply Voltage Range (max rating) | 40 V | — |
| Logic Input Low Voltage (max) | 1.3 V | — |
| Logic Input High Voltage (min) | 1.6 V | — |
| Turn-On Rise Time (typ) | 2.5 us | — |
| Turn-Off Fall Time (typ) | 250 ns | — |
| Dead Time (typ) | 250 ns | — |
| Standby Current (max) | 3.3 uA | — |
| Propagation Delay (typ) | 3.6 us | — |
| Rentang Suhu Kerja | -40C to +150C | -40 °C to +150 °C |
| Paket | PG-HSOF-7-1 | PG-TDSO-8-31 (Exposed Pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Protection Features | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control | — |
| Status RoHS | Compliant | — |
| Family | — | Classic PROFET 12V |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 1 |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Diagnostic Output | — | Yes (status feedback) |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |