BTN9960LVAUMA1 vs BTS52001ENAXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTN9960LVAUMA1 sa pamamagitan ng Infineon at BTS52001ENAXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTN9960LVAUMA1 - 9.7mOhm 35A Half-Bridge Motor Driver | Infineon
BTN9960LVAUMA1 ✓ NakahandaInfineon
BTS52001ENAXUMA1 - 200mΩ 1.5A Smart High-Side Switch | Infineon
BTS52001ENAXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | BTN9960LVAUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Motor Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Integrated Half-Bridge Motor Driver | Smart High-Side Power Switch |
| Topolohiya | P-channel high-side + N-channel low-side MOSFET with integrated driver IC | — |
| Path Resistance (typ @ 25C) | 9.7 mOhm | — |
| Overcurrent Detection Threshold | 35 A | — |
| Supply Voltage Range (operating) | 8 V to 18 V | — |
| Supply Voltage Range (max rating) | 40 V | — |
| Logic Input Low Voltage (max) | 1.3 V | — |
| Logic Input High Voltage (min) | 1.6 V | — |
| Turn-On Rise Time (typ) | 2.5 us | — |
| Turn-Off Fall Time (typ) | 250 ns | — |
| Dead Time (typ) | 250 ns | — |
| Standby Current (max) | 3.3 uA | — |
| Propagation Delay (typ) | 3.6 us | — |
| Hanay ng Temperature na Operasyon | -40C to +150C | -40 °C to +150 °C |
| Packhaging | PG-HSOF-7-1 | PG-TDSO-8-31 (Exposed Pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Protection Features | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control | — |
| Tindminan RoHS | Compliant | — |
| Family | — | Classic PROFET 12V |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 1 |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Diagnostic Output | — | Yes (status feedback) |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |