BTS70081EPAXUMA1 vs BTT60101ERBXUMA1 Perbandingan
Perbandingan bersamaan detil BTS70081EPAXUMA1 dari Infineon dan BTT60101ERBXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS70081EPAXUMA1 | BTT60101ERBXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart High-Side Power Switch |
| Topologi | 1:1 N-Channel High-Side Switch | N-Channel vertical MOSFET with charge pump |
| Continuous Load Current | 10 A | 9 A |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| Tegangan Pemuat Kerja | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | Status pin (ST) and current sense (IS) |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| Rentang Suhu Kerja | -40 C to +150 C (Tj) | -40 °C to +150 °C |
| Paket | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Status RoHS | Compliant | — |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Number of Channels | — | 1 |
| On-State Resistance (Typ) | — | 10 mΩ |
| Supply Voltage Range | — | 5 V to 36 V |
| Reverse Battery Protection | — | up to -36 V |
| Input Control Logic | — | Active High |
| Process Technology | — | Infineon Smart6 |
| Targeted Lamp Load | — | 5 × P21W 24 V or 1 × H55W 12 V |
| Compliance | — | RoHS |