BTS70081EPAXUMA1 vs BTT60101ERBXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS70081EPAXUMA1 disebabkan oleh Infineon dan BTT60101ERBXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTS70081EPAXUMA1 | BTT60101ERBXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart High-Side Power Switch |
| Tetstruktur | 1:1 N-Channel High-Side Switch | N-Channel vertical MOSFET with charge pump |
| Continuous Load Current | 10 A | 9 A |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| Tegangan Pemberi Arus Operasi | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | Status pin (ST) and current sense (IS) |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| Gambaran Suhu Operasi | -40 C to +150 C (Tj) | -40 °C to +150 °C |
| Kemasan | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Status RoHS | Compliant | — |
| Aras MSL | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Number of Channels | — | 1 |
| On-State Resistance (Typ) | — | 10 mΩ |
| Supply Voltage Range | — | 5 V to 36 V |
| Reverse Battery Protection | — | up to -36 V |
| Input Control Logic | — | Active High |
| Process Technology | — | Infineon Smart6 |
| Targeted Lamp Load | — | 5 × P21W 24 V or 1 × H55W 12 V |
| Compliance | — | RoHS |