BTS70402EPGXUMA1 vs BTH61002EPAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS70402EPGXUMA1 dari Infineon dan BTH61002EPAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS70402EPGXUMA1 | BTH61002EPAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fungsi | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 2 |
| Konfigurasi Output | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | 2.0 A |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Rentang Suhu Kerja | -40 °C to +150 °C junction | -40 C to +150 C [DATA_NEEDED: junction T_max] |
| Paket | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14 (exposed pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | PROFET + 48V |
| Topologi | — | Dual high-side switch (2 x 1:1) |
| Switch Type | — | N-channel vertical power MOSFET with charge pump |
| Typical On-State Resistance (Ron) | — | 200 mOhm |
| Nominal Supply Voltage | — | 54 V |
| Maximum Operating Voltage | — | 60 V |
| Load Dump Capability | — | 60 V |
| Input Control Logic | — | Active-High / Active-Low |
| Diagnostic Function | — | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature |
| Current Limitation | — | Adjustable |
| Automotive Qualification | — | AEC-Q100 |
| Status RoHS | — | Compliant |