DRV8886ATPWPR vs DRV8886ATPWP Perbandingan
Perbandingan bersamaan detil DRV8886ATPWPR dari Texas Instruments dan DRV8886ATPWP dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ AktifTexas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | DRV8886ATPWPR | DRV8886ATPWP |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Motor Type | Bipolar stepper (2-phase) | Bipolar Stepper |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | 3 V to 5.5 V |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | Full to 1/16 step |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | STEP / DIR (Hardware GPIO) |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | 20 µA |
| Suhu Kerja | -40 C to +125 C | — |
| Paket | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | HTSSOP-24 (PWP) PowerPAD |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 2 | 2 (per JEDEC J-STD-020) |
| RoHS / Pb-Free | Yes (compliant) | — |
| Number of Full H-Bridges | — | 2 |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| RMS Output Current | — | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | — | 3 A |
| HS + LS On-Resistance (RDSon) | — | 550 mΩ |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Decay Modes | — | Smart tune, mixed, slow, fast (programmable) |
| PWM Chopping Frequency | — | Up to 100 kHz |
| Rentang Suhu Kerja | — | -40°C to +125°C |
| Temperature Grade | — | Automotive |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |
| Status RoHS | — | Compliant |