EPC1L20 vs EPC2LC20 Perbandingan
Perbandingan bersamaan detil EPC1L20 dari Altera dan EPC2LC20 dari Altera. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | EPC1L20 | EPC2LC20 |
|---|---|---|
| Merek | Altera | Altera |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Aktif | NRND |
| Tipe Memori | OTP Configuration PROM (Flash) | Non-volatile configuration PROM |
| Ukuran Memori | 1 Mbit | 1.6 Mbit |
| Configuration Clock (max) | 8 MHz | — |
| Flash Access Time | 90 ns (approx.) | — |
| Max Read Bandwidth | 160 Mbps (16-bit DQ bus) | — |
| Antarmuka | Serial / FPP configuration + JTAG (IEEE 1149.1) | — |
| Tegangan Pemuat | 3.3 V (typical) | — |
| Programmability | One-Time Programmable (OTP) | — |
| Paket | 20-pin PLCC (9x9 mm) | 20-pin PLCC (J-lead, 9x9 mm) |
| Tipe Mounting | Through-Hole / Socket | Surface Mount |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] |
| JTAG / ISP Support | Yes (IEEE 1149.1) | — |
| Compatible FPGA Series | Stratix, Cyclone, APEX, FLEX, ACEX, LUT-based families | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance] | Non-Compliant (original Altera Pb-containing part) |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Configuration Interface | — | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE |
| Programming Interface | — | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (3.3-V operation) |
| ISP Voltage Range | — | 5.0 V or 3.3 V |
| Supported FPGA Families | — | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 |
| Cascade Support | — | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams |
| Lead-Free Version | — | EPC2LC20N available as lead-free equivalent |
| Programming Support | — | Altera Programming Unit (APU), Quartus II, JTAG programmer |
| Boundary-Scan | — | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG |