EPC2TC32UCAF vs EPC2TC32UCF48 Perbandingan
Perbandingan bersamaan detil EPC2TC32UCAF dari Altera dan EPC2TC32UCF48 dari Intel. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | EPC2TC32UCAF | EPC2TC32UCF48 |
|---|---|---|
| Merek | Altera | Intel |
| Kategori | FPGA & CPLD | Memory ICs |
| Status Lingkungan Hidup | Obsolete | NRND |
| Device Type | Configuration PROM (CPLD-style boot memory) | — |
| Memory Density | 1.6 Mbit | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Supported FPGA Families | Altera APEX, Cyclone, Stratix, FLEX (LUT devices) | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | 3.0 V to 3.6 V (3.3 V typical) |
| I/O Logic Levels | 3.3 V / 2.5 V compatible | — |
| Configuration Interface | FLEX passive serial / passive parallel synchronous / passive parallel asynchronous | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Programming Interface | IEEE 1149.1 (JTAG) in-system programmable | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Daisy-Chain Support | Yes (via nCASC pin, multi-device FLEX chain) | — |
| Compression Support | Altera bitstream compression compatible | — |
| Paket | 32-pin TQFP (CAF48), 7x7 mm | 48-pin TQFP (7x7 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | 0C to +70C (commercial) |
| Level MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: confirm RoHS compliance] |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Bebas Halogen | [DATA_NEEDED: halogen-free status] | — |
| Tipe Memori | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |